plat/regs-nand.h is used only by S3C2410 nand driver. Since there
are no other users, merge this file into the driver code to remove
platform dependency.
Signed-off-by: Sachin Kamat
---
The earlier version of this patch was titled
"mtd: s3c2410: Move plat/regs-nand.h to drivers/mtd&quo
fiq.h contains only a function declaration and is not used by anyone
else. Move the declaration to the driver header file and remove the
unnecessary platform dependency from the driver.
Signed-off-by: Sachin Kamat
---
arch/arm/plat-samsung/include/plat/fiq.h | 13 -
drivers/spi
There seems to be no users of this code in the tree for now.
Hence remove it.
Signed-off-by: Sachin Kamat
---
S5P_DEV_I2C_HDMIPHY config entry is not selected by any machine.
Please check if this code is required for S5PV210 HDMI support.
Untested on that platform.
---
arch/arm/plat-samsung
Hi Jingoo,
On 31 December 2013 12:17, Jingoo Han wrote:
> On Tuesday, December 31, 2013 2:12 PM, Sachin Kamat wrote:
>>
>> plat/regs-nand.h is used only by s3c2410 nand driver.
>> Move this file to the drivers folder to remove platform
>> dependency.
>&g
plat/regs-ata.h is used only by Samsung PATA driver.
Move this file to the drivers folder to remove platform
dependency required for multiplatform support.
Signed-off-by: Sachin Kamat
---
drivers/ata/pata_samsung_cf.c |2 +-
.../regs-ata.h => drivers/
plat/regs-nand.h is used only by s3c2410 nand driver.
Move this file to the drivers folder to remove platform
dependency.
Signed-off-by: Sachin Kamat
---
drivers/mtd/nand/s3c2410.c |2 +-
.../plat/regs-nand.h => drivers/mtd/nand/s3c2410.h | 11 ---
2 fi
Hi Olof,
On 29 December 2013 04:47, Olof Johansson wrote:
> On Sun, Dec 22, 2013 at 03:23:57AM +0900, Kukjin Kim wrote:
>> The following changes since commit 538cfbb4c40ab59688236484138133b8e3e89220:
>>
>> ARM: dts: Add initial support for Arndale Octa board (2013-12-16
>> 05:05:43 +0900)
>>
>>
On 19 December 2013 09:14, Sachin Kamat wrote:
> Hi Tomasz,
>
> On 10 November 2013 22:44, Tomasz Figa wrote:
>> Hi Sachin, Andrew,
>>
>> On Friday 08 of November 2013 15:44:08 Sachin Kamat wrote:
>>> From: Andrew Bresticker
>>>
>>> Registe
On 30 December 2013 23:21, Tomasz Figa wrote:
> On Thursday 19 of December 2013 11:37:08 Mike Turquette wrote:
>> Quoting Sachin Kamat (2013-12-19 00:33:39)
>> > Add CLK_SET_RATE_PARENT flag to mout_apll clock. This will let us set the
>> > clock rate in the cpufreq d
On 30 December 2013 23:22, Tomasz Figa wrote:
> On Saturday 21 of December 2013 09:37:06 Sachin Kamat wrote:
>> On 21 December 2013 02:44, Tomasz Figa wrote:
>> > On Thursday 19 of December 2013 21:05:09 Sachin Kamat wrote:
>> >> Hi Tomasz,
>> >>
&g
plat/rtc-core.h is only referenced from mach-s3c24xx. Hence
move it there to de-populate the plat directory. While at it
also do some cleanup of the header file.
Signed-off-by: Sachin Kamat
Cc: Heiko Stuebner
---
.../plat => mach-s3c24xx/include/mach}/rtc-core.h | 13 ++---
arch/
The only user of s5p_hdmi_setname is s5pv210. Inline this function
in the caller file and delete the header file (as other functions
defined in this header are not called anywhere).
Signed-off-by: Sachin Kamat
---
arch/arm/mach-s5pv210/common.c |8 -
arch/arm/plat-samsung
(Trimmed down the CC list)
Hi Mateusz,
On 28 December 2013 22:39, Mateusz Krawczuk wrote:
> From: Mateusz Krawczuk
>
> Use common clock framework api to get clock.
The commit message looks a bit off. clk_get() is also a CCF API.
Hence it makes more sense to mention the reason for replacing clk
Make the Kconfig help message uniform across SoCs. While
at it enable Exynos5 by default.
Signed-off-by: Sachin Kamat
---
arch/arm/mach-exynos/Kconfig |7 ---
1 file changed, 4 insertions(+), 3 deletions(-)
diff --git a/arch/arm/mach-exynos/Kconfig b/arch/arm/mach-exynos/Kconfig
index
CONFIG_MACH_EXYNOS4_DT does not exist. Use ARCH_EXYNOS4 instead.
Signed-off-by: Sachin Kamat
---
arch/arm/configs/exynos_defconfig |2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/arch/arm/configs/exynos_defconfig
b/arch/arm/configs/exynos_defconfig
index dbe1f1c47bb0
regs-serial.h only includes linux/serial_s3c.h. Include this
header directly in samsung.S to remove unnecessary platform
dependency.
Signed-off-by: Sachin Kamat
---
arch/arm/include/debug/samsung.S |2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/arch/arm/include/debug
Commit 436d42c61c3e ("ARM: samsung: move platform_data definitions")
moved the files to the current location but forgot to remove the pointer
to its previous location. Clean it up. While at it also change the header
file protection macros appropriately.
Signed-off-by: Sachin Kamat
--
commit 5d229ce569be ("ASoC: samsung: move plat/ headers to local directory")
moved the header files but forgot to clean the pointers to their old locaton.
Remove them now.
Signed-off-by: Sachin Kamat
---
sound/soc/samsung/regs-ac97.h |9 -
sound/soc/samsung/regs-iis
Hi Kukjin,
On 24 December 2013 07:07, Kukjin Kim wrote:
> Heiko Stübner wrote:
>>
>> Hi Kukjin,
>>
> Hi,
>
>> it seems you didn't have the time for this series during your 2nd round.
>>
>> I'm not sure what your plans/time constraint are, but according to the -
>> rc5
>> release mail from Linus [
Some boards might not have RTC xtal, so RTC shouldn't really be
enabled by default. Enable it in the required board files. For
now enable it for all board files to maintain the enabled status
exisitng prior to this patch.
Signed-off-by: Sachin Kamat
---
arch/arm/boot/dts/exynos5250-arndal
On 21 December 2013 02:44, Tomasz Figa wrote:
> On Thursday 19 of December 2013 21:05:09 Sachin Kamat wrote:
>> Hi Tomasz,
>>
>> On 19 December 2013 19:40, Tomasz Figa wrote:
>> > Hi Sachin, Andrew,
>> >
>> > On Wednesday 18 of December 2
Hi Tomasz,
On 21 December 2013 02:42, Tomasz Figa wrote:
> Hi Sachin,
>
> On Thursday 19 of December 2013 16:27:53 Sachin Kamat wrote:
>> Some boards might not have RTC xtal, so RTC shouldn't really be
>> enabled by default. Enable it in the required board files.
&
Hi Tomasz,
On 19 December 2013 19:40, Tomasz Figa wrote:
> Hi Sachin, Andrew,
>
> On Wednesday 18 of December 2013 23:39:58 Sachin Kamat wrote:
>> Hi Tomasz,
>>
>> On 10 November 2013 22:38, Tomasz Figa wrote:
>> > Hi Sachin, Andrew,
>> >
>> &g
Hi Tomasz, Leela,
On 19 December 2013 00:13, Tomasz Figa wrote:
> Hi Sachin,
>
> This is inconsistent:
> - for 1-bit bus you would have to specify just sdX_bus1,
> - for 4-bit just sdX_bus4, but
> - for 8-bit you need to specify both sdX_bus4 and sdX_bus8.
>
> The change Leela mentioned was about
Some boards might not have RTC xtal, so RTC shouldn't really be
enabled by default. Enable it in the required board files.
Signed-off-by: Sachin Kamat
---
arch/arm/boot/dts/exynos5420-arndale-octa.dts |4
arch/arm/boot/dts/exynos5420-smdk5420.dts |4
arch/arm/boo
Add CLK_SET_RATE_PARENT flag to mout_apll clock. This will let us set the
clock rate in the cpufreq driver.
Signed-off-by: Sachin Kamat
---
drivers/clk/samsung/clk-exynos5250.c |3 ++-
1 file changed, 2 insertions(+), 1 deletion(-)
diff --git a/drivers/clk/samsung/clk-exynos5250.c
b
correct value until now. While at it clean up the PLL s-div
>> parameter setting as it is handled by the PLL driver.
>>
>> Signed-off-by: Sachin Kamat
>> ---
>
> Looks good to me.
>
> Reviewed-by: Lukasz Majewski
Didn't see this in linux-next yet, hence
Hi Tomasz,
On 18 December 2013 20:46, Tomasz Figa wrote:
> Hi Sachin,
>
> On Thursday 05 of December 2013 15:14:24 Sachin Kamat wrote:
>> Added regulator entries to Exynos5420 SMDK board.
>>
>> Signed-off-by: Sachin Kamat
>> ---
>> Changes since v1:
>&g
Hi Tomasz,
On 10 November 2013 22:44, Tomasz Figa wrote:
> Hi Sachin, Andrew,
>
> On Friday 08 of November 2013 15:44:08 Sachin Kamat wrote:
>> From: Andrew Bresticker
>>
>> Register the APLL rate table so that we can set the APLL rate from
>> the cpufreq dr
Hi Kukjin,
On 12 November 2013 15:53, Kukjin Kim wrote:
> Sachin Kamat wrote:
>>
>
> Following is more clear?
>
> "ARM: dts: Add missing GPIO entries for sd_bus_width4 in exynos5420-pinctrl"
>
>> Adds missing GPIO entries for sd_bus nodes in exynos5420-pi
Hi Tomasz,
On 10 November 2013 22:38, Tomasz Figa wrote:
> Hi Sachin, Andrew,
>
> On Friday 08 of November 2013 15:44:07 Sachin Kamat wrote:
>> From: Andrew Bresticker
>>
>> The gate clocks for the MFC sysmmus appear to be flipped, i.e.
>> GATE_IP_MFC[2] ga
On 10 December 2013 12:08, Sachin Kamat wrote:
> S2MPS11 voltage regulator is commonly used on the latest Exynos
> boards like SMDK5420, Arndale-Octa, etc. Hence it makes sense to
> enable it like S5M8767A voltage regulator.
>
> Signed-off-by: Sachin Kamat
> ---
&
Added GPIO based wake up key to Arndale octa board.
Signed-off-by: Sachin Kamat
---
arch/arm/boot/dts/exynos5420-arndale-octa.dts | 11 +++
1 file changed, 11 insertions(+)
diff --git a/arch/arm/boot/dts/exynos5420-arndale-octa.dts
b/arch/arm/boot/dts/exynos5420-arndale-octa.dts
LDO10 is directly connected to MMC controller. Register this
through vmmc-supply property.
Signed-off-by: Sachin Kamat
---
arch/arm/boot/dts/exynos5420-arndale-octa.dts |2 ++
1 file changed, 2 insertions(+)
diff --git a/arch/arm/boot/dts/exynos5420-arndale-octa.dts
b/arch/arm/boot/dts
Added PMIC node to Arndale-Octa board.
Signed-off-by: Sachin Kamat
---
Changes since v1:
* Renamed the labels and fixed voltage levels as per board schema.
---
arch/arm/boot/dts/exynos5420-arndale-octa.dts | 281 +
1 file changed, 281 insertions(+)
diff --git a/arch
Add firmware node for doing secure boot on Arndale-octa board.
Signed-off-by: Sachin Kamat
---
arch/arm/boot/dts/exynos5420-arndale-octa.dts |5 +
1 file changed, 5 insertions(+)
diff --git a/arch/arm/boot/dts/exynos5420-arndale-octa.dts
b/arch/arm/boot/dts/exynos5420-arndale-octa.dts
Secure firmware support for booting secondary CPUs on Exynos5420
based boards with trustzone support.
Signed-off-by: Sachin Kamat
Signed-off-by: Tushar Behera
---
arch/arm/mach-exynos/firmware.c|6 +-
arch/arm/mach-exynos/mach-exynos5-dt.c |1 +
2 files changed, 6
On trustzone enabled boards non-secure SYSRAM is used for
secondary CPU boot up.
Signed-off-by: Sachin Kamat
Signed-off-by: Tushar Behera
---
arch/arm/mach-exynos/common.c | 11 +++
arch/arm/mach-exynos/include/mach/map.h |1 +
2 files changed, 12 insertions(+)
diff
Add firmware node for doing secure boot on Arndale-octa board.
Signed-off-by: Sachin Kamat
---
arch/arm/boot/dts/exynos5420-arndale-octa.dts |5 +
1 file changed, 5 insertions(+)
diff --git a/arch/arm/boot/dts/exynos5420-arndale-octa.dts
b/arch/arm/boot/dts/exynos5420-arndale-octa.dts
Secure firmware support for booting secondary CPUs on Exynos5420
based boards with trustzone support.
Signed-off-by: Sachin Kamat
Signed-off-by: Tushar Behera
---
arch/arm/mach-exynos/firmware.c|6 +-
arch/arm/mach-exynos/mach-exynos5-dt.c |1 +
2 files changed, 6
On trustzone enabled boards non-secure SYSRAM is used for
secondary CPU boot up.
Signed-off-by: Sachin Kamat
Signed-off-by: Tushar Behera
---
arch/arm/mach-exynos/common.c | 11 +++
arch/arm/mach-exynos/include/mach/map.h |1 +
2 files changed, 12 insertions(+)
diff
Hi Mark,
Sorry for the late reply as I was sick and still recovering.
On 11 December 2013 00:24, Mark Brown wrote:
> On Tue, Dec 10, 2013 at 11:59:18AM +0530, Sachin Kamat wrote:
>
>> Added PMIC node to Arndale-Octa board.
>
> Is there a bootloader posted for this anywhere
On 13 November 2013 17:51, Tomasz Figa wrote:
> On Wednesday 13 of November 2013 12:52:05 Bartlomiej Zolnierkiewicz wrote:
>
> [+ DT maintainers]
>
>>
>> Hi,
>>
>> On Wednesday, November 13, 2013 11:27:03 AM Sylwester Nawrocki wrote:
>> > On 13/11/13 09:08, Tomasz Figa wrote:
>> > >> As was discus
S2MPS11 voltage regulator is commonly used on the latest Exynos
boards like SMDK5420, Arndale-Octa, etc. Hence it makes sense to
enable it like S5M8767A voltage regulator.
Signed-off-by: Sachin Kamat
---
arch/arm/configs/exynos_defconfig |1 +
1 file changed, 1 insertion(+)
diff --git a
Added PMIC node to Arndale-Octa board.
Signed-off-by: Sachin Kamat
---
arch/arm/boot/dts/exynos5420-arndale-octa.dts | 220 +
1 file changed, 220 insertions(+)
diff --git a/arch/arm/boot/dts/exynos5420-arndale-octa.dts
b/arch/arm/boot/dts/exynos5420-arndale-octa.dts
Hi Arun,
On 10 December 2013 10:15, Arun Kumar K wrote:
> Hi Pawel,
>
> On Tue, Dec 10, 2013 at 6:21 AM, Pawel Osciak wrote:
>> Hi Arun,
>>
>
> Ok will make the change in next version.
>
While at it also update the patch subject appropriately.
--
With warm regards,
Sachin
--
To unsubscribe f
Hi Tomasz,
On 9 December 2013 19:01, Tomasz Figa wrote:
> Hi Sachin,
>
> On Thursday 21 of November 2013 09:47:34 Sachin Kamat wrote:
>> Add CLK_SET_RATE_PARENT flag to be able to change the frequency
>> to desired value.
>>
>> Signed-off-by: Sachin Kamat
&
Hi Rahul,
On 6 December 2013 21:26, Rahul Sharma wrote:
> From: Pankaj Dubey
>
> exynos5260 use pll2520xx and it has different bitfields
> for P,M,S values as compared to pll2550xx. Support for
> pll2520xx is added here.
This is a bit confusing to me. The commit message says "Support for
pll252
Hi Rahul,
On 6 December 2013 21:26, Rahul Sharma wrote:
> Add support for pll2650xx in samsung pll file. This pll variant
> is close to pll36xx but uses CON2 registers instead of CON1.
>
> Aud_pll in Exynos5260 is pll2650xx and uses this code.
>
> Signed-off-by: Rahul Sharma
> ---
> drivers/clk
Hi Rahul,
On 6 December 2013 21:26, Rahul Sharma wrote:
> From: Pankaj Dubey
>
> This patch add basic arch side support for exynos5260 SoC.
>
> Signed-off-by: Pankaj Dubey
> Signed-off-by: Arun Kumar K
Since you are posting the patch, your signed off is also required.
[snip]
> void exynos4
Hi Rahul, Young-Gun,
On 6 December 2013 21:26, Rahul Sharma wrote:
> From: Young-Gun Jang
>
> Add Samsung Exynos5260 SoC specific data to enable pinctrl
> support for all platforms based on EXYNOS5260.
>
> Signed-off-by: Pankaj Dubey
> Signed-off-by: Rahul Sharma
> Signed-off-by: Arun Kumar K
Added regulator entries to Exynos5420 SMDK board.
Signed-off-by: Sachin Kamat
---
Changes since v1:
Changed node name
---
arch/arm/boot/dts/exynos5420-smdk5420.dts | 216 +
1 file changed, 216 insertions(+)
diff --git a/arch/arm/boot/dts/exynos5420-smdk5420.dts
b
Hi Abhilash,
On 3 December 2013 20:16, Abhilash Kesavan wrote:
> Hi Yadwinder and Sachin,
> CC'ing Doug and Andrew who have also worked on ASV.
>
> I tested these patches on a 5250 Chromebook after modifying the
> cpufreq code and a few other changes for booting the board. The driver
> is retrie
On 3 December 2013 17:10, Sachin Kamat wrote:
> From: Ajay Kumar
>
> Added exynos5420_sys_save[] structure for system registers on Exynos5420.
> We save the values of all the system registers present in the list
> exynos5420_sys_save[], and we restore these values on resume.
&g
.
NOTE: Restoring of EXYNOS5_SYS_DISP1_BLK_CFG was not done on Exynos5250
because we use MIE path on Exynos5250 and the default reset value of
EXYNOS5_SYS_DISP1_BLK_CFG is set to use MIE.
Signed-off-by: Ajay Kumar
Tested-by: Prathyush Kalashwaram
Signed-off-by: Sachin Kamat
---
arch/arm/mach
Added high speed I2C nodes to Exynos5420 DT file.
Signed-off-by: Sachin Kamat
---
Changes since v1:
Changed the node name to i2c as suggested by Tomasz Figa.
---
arch/arm/boot/dts/exynos5420.dtsi | 98 +
1 file changed, 98 insertions(+)
diff --git a/arch
On 10 November 2013 23:50, Tomasz Figa wrote:
> On Thursday 07 of November 2013 09:39:46 Sachin Kamat wrote:
>> Fixed samaung -> samsung in property name.
>>
>> Signed-off-by: Sachin Kamat
>> ---
>> arch/arm/boot/dts/exynos5420-pinctrl.dtsi |2 +-
&
On 12 November 2013 16:10, Kukjin Kim wrote:
> Sachin Kamat wrote:
>>
>> Fix the name as per DT node naming convention.
>> - rename the node to syscon which is a more generic name.
>> - append the register value to the node name.
>>
>> Signed-off-by: Sa
On 13 November 2013 09:17, Tushar Behera wrote:
> On 12 November 2013 15:47, Kukjin Kim wrote:
>> Sachin Kamat wrote:
>>>
>> + dt ml.
>>
>>> As per the timing information for supported panel, the value should
>>> be between 47.2 MHz to 47.9 MHz
Added missing clock frequency property to CPU node to avoid
boot time warnings.
Signed-off-by: Sachin Kamat
---
arch/arm/boot/dts/exynos5250.dtsi |2 ++
1 file changed, 2 insertions(+)
diff --git a/arch/arm/boot/dts/exynos5250.dtsi
b/arch/arm/boot/dts/exynos5250.dtsi
index 9db5047812f3
Arndale Octa board is based on Exynos5420 SoC. This patch
adds the basic support required for booting it through DT.
Signed-off-by: Sachin Kamat
---
arch/arm/boot/dts/Makefile|1 +
arch/arm/boot/dts/exynos5420-arndale-octa.dts | 66 +
2 files
The minimum recommended ARM voltage for Exynos5250 at 200MHz
on Arndale board is 0.9125V. Update accordingly.
Signed-off-by: Sachin Kamat
---
arch/arm/boot/dts/exynos5250-arndale.dts |2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/arch/arm/boot/dts/exynos5250-arndale.dts
Though the default value is 1, add it explicitly to avoid
unnecessary boot warnings and for consistency.
Signed-off-by: Sachin Kamat
---
arch/arm/boot/dts/exynos5250-arndale.dts |2 ++
1 file changed, 2 insertions(+)
diff --git a/arch/arm/boot/dts/exynos5250-arndale.dts
b/arch/arm/boot
On 26 November 2013 09:56, Naveen Krishna Chatradhi
wrote:
> This patch adds new compatible to support HSI2C module on Exynos5260
> HSI2C module on Exynos5260 needs to be reset during during initialization.
>
> Signed-off-by: Naveen Krishna Chatradhi
[snip]
>
> Required properties:
>- compat
driver.
Signed-off-by: Sachin Kamat
---
To fully test this, the following 2 patches would be necessary:
* clk: exynos5250: register APLL rate table
http://www.spinics.net/lists/arm-kernel/msg285103.html
* clk: exynos5250: Add CLK_SET_RATE_PARENT flag to mout_apll
http://permalink.gmane.org
Add CLK_SET_RATE_PARENT flag to be able to change the frequency
to desired value.
Signed-off-by: Sachin Kamat
---
drivers/clk/samsung/clk-exynos5250.c |3 ++-
1 file changed, 2 insertions(+), 1 deletion(-)
diff --git a/drivers/clk/samsung/clk-exynos5250.c
b/drivers/clk/samsung/clk
Hi MyungJoo,
On 18 November 2013 08:07, MyungJoo Ham wrote:
>
> 2013. 11. 15. 오후 8:44에 "Sachin Kamat" 님이 작성:
>
>
>>
>> Original cover letter from Yadwinder:
>> This series is to add basic common infrastructure for ASV.
>> Basically ASV is a tech
From: Yadwinder Singh Brar
This patch adds basic support (only for ARM ASV) for exynos5250 chips
which have fused ASV group.
Signed-off-by: Yadwinder Singh Brar
Signed-off-by: Sachin Kamat
---
drivers/power/asv/Makefile |2 +-
drivers/power/asv/exynos-asv.c |8
From: Yadwinder Singh Brar
This patch adds a common platform driver to register ASV members for
Exynos SoCs.
Signed-off-by: Yadwinder Singh Brar
Signed-off-by: Sachin Kamat
---
drivers/power/asv/Kconfig | 13
drivers/power/asv/Makefile |1 +
drivers/power/asv/exynos
-by: Yadwinder Singh Brar
Signed-off-by: Sachin Kamat
---
drivers/power/Kconfig|1 +
drivers/power/Makefile |1 +
drivers/power/asv/Kconfig| 10 +++
drivers/power/asv/Makefile |1 +
drivers/power/asv/asv.c | 176
From: Yadwinder Singh Brar
Since ASV is not a hardware controller, we can't add device tree node
for it. This patch registers a static platform device for Exynos ASV.
Signed-off-by: Yadwinder Singh Brar
Signed-off-by: Sachin Kamat
---
arch/arm/mach-exynos/mach-exynos5-dt.c |2 ++
1
Original cover letter from Yadwinder:
This series is to add basic common infrastructure for ASV.
Basically ASV is a technique used on samsung SoCs, which provides the
recommended supply voltage for dvfs of arm, mif etc. For a given operating
frequency, the voltage is recommended based on SoC's ASV
+ Tomi
Hi Olof,
On 15 November 2013 02:39, Olof Johansson wrote:
> commit 7e0be9f9f7cba3356f75b86737dbe3a005da067e ('video: exynos_mipi_dsim:
> Use the generic PHY driver') resulted in a warning about an unused
> variable:
>
> drivers/video/exynos/exynos_mipi_dsi.c:144:26: warning: unused variab
Hi Leela,
Thanks for the detailed explanation.
On 12 November 2013 17:20, Leela Krishna Amudala
wrote:
> Hi Sachin,
>
> On Tue, Nov 12, 2013 at 3:53 PM, Kukjin Kim wrote:
>> Sachin Kamat wrote:
>>>
>>
>> Following is more clear?
>>
>> "AR
Hi Kukjin,
On 12 November 2013 16:31, Kukjin Kim wrote:
> Sachin Kamat wrote:
>>
>> Since there are no board specific properties for the RTC node,
>> keep it enabled in the dtsi file.
>>
>> Signed-off-by: Sachin Kamat
>> ---
>> arch/arm/boot/dt
Hi Kukjin,
On 12 November 2013 16:33, Kukjin Kim wrote:
> Sachin Kamat wrote:
>>
>> Enabled watchdog in Exynos4.
>>
>> Signed-off-by: Sachin Kamat
>> ---
>> arch/arm/boot/dts/exynos4.dtsi |1 -
>> 1 file changed, 1 deletion(-)
>>
>>
Hi Tomasz,
On 10 November 2013 22:38, Tomasz Figa wrote:
> Hi Sachin, Andrew,
>
> On Friday 08 of November 2013 15:44:07 Sachin Kamat wrote:
>> From: Andrew Bresticker
>>
>> The gate clocks for the MFC sysmmus appear to be flipped, i.e.
>> GATE_IP_MFC[2] ga
On 8 November 2013 15:44, Sachin Kamat wrote:
> From: Andrew Bresticker
>
> The EPLL configuration register needs to be saved across
> suspend/resume.
>
> Signed-off-by: Andrew Bresticker
> Signed-off-by: Sachin Kamat
> ---
> drivers/clk/samsung/clk-exynos5250.c |
From: Andrew Bresticker
The EPLL configuration register needs to be saved across
suspend/resume.
Signed-off-by: Andrew Bresticker
Signed-off-by: Sachin Kamat
---
drivers/clk/samsung/clk-exynos5250.c |1 +
1 file changed, 1 insertion(+)
diff --git a/drivers/clk/samsung/clk-exynos5250.c
From: Andrew Bresticker
The gate clocks for the MFC sysmmus appear to be flipped, i.e.
GATE_IP_MFC[2] gates sysmmu_mfcl and GATE_IP_MFC[1] gates sysmmu_mfcr.
Fix this so that the MFC will start up.
Signed-off-by: Andrew Bresticker
Signed-off-by: Sachin Kamat
---
drivers/clk/samsung/clk
From: Andrew Bresticker
Register the APLL rate table so that we can set the APLL rate from
the cpufreq driver.
Signed-off-by: Andrew Bresticker
Signed-off-by: Sachin Kamat
---
drivers/clk/samsung/clk-exynos5250.c | 25 -
1 file changed, 24 insertions(+), 1 deletion
y: Prathyush K
Signed-off-by: Sachin Kamat
---
.../bindings/arm/exynos/power_domain.txt |5 +
arch/arm/mach-exynos/pm_domains.c | 10 +++---
2 files changed, 12 insertions(+), 3 deletions(-)
diff --git a/Documentation/devicetree/bindings/arm/exynos/power_d
Fixed samaung -> samsung in property name.
Signed-off-by: Sachin Kamat
---
arch/arm/boot/dts/exynos5420-pinctrl.dtsi |2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/arch/arm/boot/dts/exynos5420-pinctrl.dtsi
b/arch/arm/boot/dts/exynos5420-pinctrl.dtsi
index e695aba5f
Added regulator entries to Exynos5420 SMDK board.
Signed-off-by: Sachin Kamat
---
arch/arm/boot/dts/exynos5420-smdk5420.dts | 216 +
1 file changed, 216 insertions(+)
diff --git a/arch/arm/boot/dts/exynos5420-smdk5420.dts
b/arch/arm/boot/dts/exynos5420-smdk5420
Added high speed I2C nodes to Exynos5420 DT file.
Signed-off-by: Sachin Kamat
---
arch/arm/boot/dts/exynos5420.dtsi | 98 +
1 file changed, 98 insertions(+)
diff --git a/arch/arm/boot/dts/exynos5420.dtsi
b/arch/arm/boot/dts/exynos5420.dtsi
index 9ce5f82
Hi Thierry,
On 30 October 2013 10:09, Sachin Kamat wrote:
> Updated supported SoC name for pwm-samsung.
>
> Signed-off-by: Sachin Kamat
> ---
> .../devicetree/bindings/pwm/pwm-samsung.txt|2 +-
> 1 file changed, 1 insertion(+), 1 deletion(-)
>
> di
Added a binding example for reference and updated the
node name. While at it also removed the name description
as it is not necessary.
Signed-off-by: Sachin Kamat
---
Changes since v2:
* Removed node name description as suggested by Tomasz Figa.
---
.../devicetree/bindings/arm/samsung
Fix the name as per DT node naming convention.
- rename the node to syscon which is a more generic name.
- append the register value to the node name.
Signed-off-by: Sachin Kamat
Reviewed-by: Tomasz Figa
---
Changes since v2:
None.
---
arch/arm/boot/dts/exynos4.dtsi |2 +-
1 file changed
On 26 September 2013 10:20, Sachin Kamat wrote:
> From: Tushar Behera
>
> As per the timing information for supported panel, the value should
> be between 47.2 MHz to 47.9 MHz for 60Hz refresh rate.
>
> Total horizontal pixels = 1024 (x-res) + 80 (margin) + 48 (hsync) = 115
Enabled watchdog in Exynos4.
Signed-off-by: Sachin Kamat
---
arch/arm/boot/dts/exynos4.dtsi |1 -
1 file changed, 1 deletion(-)
diff --git a/arch/arm/boot/dts/exynos4.dtsi b/arch/arm/boot/dts/exynos4.dtsi
index ce24edba7f6d..b7378154c0a1 100644
--- a/arch/arm/boot/dts/exynos4.dtsi
+++ b
le strings for watchdog node
> - splitted up adding pmusysreg node and made it separate patch
> - Addressed comments given by Sachin Kamat
>
> Changes since V2:
> - used syscon regmap interface to configure pmu registers in WDT
> driver
> (suggeste
: Sachin Kamat
Cc: Heiko Stuebner
Cc: Vinod Koul
---
drivers/dma/s3c24xx-dma.c |2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/drivers/dma/s3c24xx-dma.c b/drivers/dma/s3c24xx-dma.c
index 4cb127978636..085da4fe6613 100644
--- a/drivers/dma/s3c24xx-dma.c
+++ b/drivers/dma/s3c24xx
Added a binding example for reference and updated the
node name.
Signed-off-by: Sachin Kamat
---
.../devicetree/bindings/arm/samsung/sysreg.txt |8 +++-
1 file changed, 7 insertions(+), 1 deletion(-)
diff --git a/Documentation/devicetree/bindings/arm/samsung/sysreg.txt
b
Fix the name as per DT node naming convention.
- rename the node to syscon which is a more generic name.
- append the register value to the node name.
Signed-off-by: Sachin Kamat
---
Changes since v1:
* Renamed the node to syscon as suggested by Tomasz Figa.
---
arch/arm/boot/dts/exynos4.dtsi
On 30 October 2013 15:39, Leela Krishna Amudala wrote:
> Hi,
>
> On Wed, Oct 30, 2013 at 3:22 PM, Sachin Kamat wrote:
>> Hi Leela,
>>
>> On 30 October 2013 15:21, Leela Krishna Amudala
>> wrote:
>>> This patch adds pmusysreg node to Exynos5 dtsi fil
Added a binding example for reference.
Signed-off-by: Sachin Kamat
---
.../devicetree/bindings/arm/samsung/sysreg.txt |6 ++
1 file changed, 6 insertions(+)
diff --git a/Documentation/devicetree/bindings/arm/samsung/sysreg.txt
b/Documentation/devicetree/bindings/arm/samsung
Fix the name as per DT node naming convention.
Signed-off-by: Sachin Kamat
---
arch/arm/boot/dts/exynos4.dtsi |2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/arch/arm/boot/dts/exynos4.dtsi b/arch/arm/boot/dts/exynos4.dtsi
index e262946..68479c3 100644
--- a/arch/arm/boot
Hi Leela,
On 30 October 2013 15:21, Leela Krishna Amudala wrote:
> This patch adds pmusysreg node to Exynos5 dtsi file to handle PMU
> register accesses in a centralized way using syscon driver
>
> Signed-off-by: Leela Krishna Amudala
> ---
> arch/arm/boot/dts/exynos5.dtsi |5 +
> 1 fil
On 30 October 2013 12:13, Leela Krishna Amudala
wrote:
> Hi Sachin,
>
> On Wed, Oct 30, 2013 at 10:56 AM, Sachin Kamat
> wrote:
>> Added an example for reference.
>>
>> Signed-off-by: Sachin Kamat
>> ---
>> .../devicetree/bindings/watchdog/samsung-wdt
On 30 October 2013 12:23, Leela Krishna Amudala wrote:
> The syscon regmap interface is used to configure AUTOMATIC_WDT_RESET_DISABLE
> and MASK_WDT_RESET_REQUEST registers of PMU to mask/unmask enable/disable of
> watchdog in probe and s2r scenarios.
>
> Signed-off-by: Leela Krishna Amudala
> --
301 - 400 of 874 matches
Mail list logo
