ue with ehci-exynos and ohci-exynos, wherein
> in the absence of SAMSUNG_USB2PHY config symbol, we end up getting
> the NOP_USB_XCEIV phy when the same is enabled. And thus the PHYs
> are not configured properly.
>
> Reported-by: Sachin Kamat
> Signed-off-by: Vivek Gautam
>
Hi Zhaowei,
On Wed, Jul 30, 2014 at 9:39 AM, Zhaowei Yuan wrote:
> Current algorithm relies on the fact that caller will align the
> size to PAGE_SIZE, otherwise order will be decreased to negative
> when remain size is less than PAGE_SIZE, it makes the function
> hard to be migrated.
> This patc
Hi Vikas,
On Mon, Jul 28, 2014 at 6:08 PM, Vikas Sajjan wrote:
> Exynos initialisation code now relies on obtaining the PMU address via
> DT, so add the exynos5260 PMU compatible string to DT match table.
>
> Signed-off-by: Vikas Sajjan
> ---
> arch/arm/mach-exynos/exynos.c |1 +
> 1 file
Hi Vikas,
On Mon, Jul 28, 2014 at 6:07 PM, Vikas Sajjan wrote:
> Adds PMU DT node for exynos5260 SoC.
>
> Signed-off-by: Vikas Sajjan
> ---
> .../devicetree/bindings/arm/samsung/pmu.txt|1 +
> arch/arm/boot/dts/exynos5260.dtsi |5 +
> 2 files changed, 6 inse
On Wed, Jul 16, 2014 at 11:10 PM, Wolfram Sang wrote:
> On Wed, Jun 25, 2014 at 10:55:31AM -0700, Doug Anderson wrote:
>> Sachin,
>>
>> On Wed, Jun 25, 2014 at 3:02 AM, Sachin Kamat
>> wrote:
>> > All Exynos5 platforms have HSI2C controllers and are needed
Hi Lukasz,
On Fri, Jul 18, 2014 at 5:29 PM, Lukasz Majewski wrote:
> Hi Sachin,
>
>> Hi Lukasz,
>>
>> I tested this script on 4210 based Origen board.
>> This is the output:
>> ./cpufreq_freq_test.sh
>> CURRENT GOVERNOR: performance
>> SET GOVERNOR: performance
>>
Hi Lukasz,
I tested this script on 4210 based Origen board.
This is the output:
./cpufreq_freq_test.sh
CURRENT GOVERNOR: performance
SET GOVERNOR: performance
##
TEST AVAILABLE FREQS
##
FREQ: 120 sleep: invalid number '0.1
Hi Naveen,
On Thu, Jul 17, 2014 at 4:49 PM, Naveen Krishna Chatradhi
wrote:
> This patch updates the IIO based ADC driver to use syscon and regmap
> APIs to access and use PMU registers instead of remapping the PMU
> registers in the driver.
>
> Signed-off-by: Naveen Krishna Chatradhi
> To: linu
Hi Doug,
On Tue, Jul 15, 2014 at 9:29 PM, Doug Anderson wrote:
> Naveen,
>
> On Tue, Jul 15, 2014 at 1:02 AM, Naveen Krishna Chatradhi
> wrote:
>> Enabled S3C24XX I2C driver and MAX77686 PMIC MFD and Voltage
>> regulator drivers used on Exynos5250 based Snow board.
>>
>> Signed-off-by: Naveen Kr
On Tue, Jul 15, 2014 at 12:20 AM, Olof Johansson wrote:
> On Mon, Jul 14, 2014 at 9:47 AM, Doug Anderson wrote:
>> Sachin,
>>
>> On Wed, Jul 9, 2014 at 3:22 AM, Sachin Kamat
>> wrote:
> Gave this a go on my board farm as well, it looks better than before
> f
Hi Doug,
On Mon, Jul 14, 2014 at 10:17 PM, Doug Anderson wrote:
> Sachin,
>
> On Wed, Jul 9, 2014 at 3:22 AM, Sachin Kamat wrote:
>> Removed outdated configs. Enabled most of the configs used on latest
>> Exynos based platforms. This will provide a reference for users tr
that they are meant to work with. This
will make life easier for end users who do not have any way knowing the
dependencies.
Signed-off-by: Sachin Kamat
Reviewed-by: Jingoo Han
---
Changes since v3:
* Rebased the series on top of latest PHY tree [1].
[1] git://git.kernel.org/pub/scm/linux/kernel
USB DWC3 driver on Exynos platform does not work without its
corresponding phy driver. Hence make the PHY driver depend on
Exynos DWC3 driver and default it to yes to make things easier
for the end user.
Signed-off-by: Sachin Kamat
Reviewed-by: Jingoo Han
---
drivers/phy/Kconfig |2 ++
1
On Mon, Jul 14, 2014 at 2:39 PM, Kishon Vijay Abraham I wrote:
>
>
> On Monday 14 July 2014 02:36 PM, Sachin Kamat wrote:
>> On Mon, Jul 14, 2014 at 2:32 PM, Kishon Vijay Abraham I
>> wrote:
>>>
>>>
>>> On Monday 14 July 2014 02:29 PM, Sachin Kama
On Mon, Jul 14, 2014 at 2:32 PM, Kishon Vijay Abraham I wrote:
>
>
> On Monday 14 July 2014 02:29 PM, Sachin Kamat wrote:
>> Hi,
>>
>> On Mon, Jul 14, 2014 at 2:26 PM, Kishon Vijay Abraham I
>> wrote:
>>> Hi,
>>>
>>> On Wednesday 09 Ju
Hi,
On Mon, Jul 14, 2014 at 2:26 PM, Kishon Vijay Abraham I wrote:
> Hi,
>
> On Wednesday 09 July 2014 05:19 PM, Sachin Kamat wrote:
>> Since the USB 2.0 PHYs are required with EHCI/OHCI USB drivers and
>> USB gadget controller supported by the DWC2 gadget driver, make it
Hi Naveen,
On Fri, Jul 11, 2014 at 2:36 PM, Naveen Krishna Chatradhi
wrote:
> The DT bindings in exynos-adc.txt applies to the ADC
> driver (exynos-adc.c) developed based on IIO framework.
>
> The bindings are more appropriate to be under
> Documentation/devicetree/bindings/iio/adc/
>
> Signed-of
t;adap.retries = 2;
> - i2c->adap.class = I2C_CLASS_HWMON | I2C_CLASS_SPD |
> I2C_CLASS_DEPRECATED;
> - i2c->tx_setup = 50;
> + i2c->adap.class = I2C_CLASS_DEPRECATED;
> + i2c->tx_setup = 50;
>
> init_waitqueue_head(&i2c->wait);
Group all pin control drivers of Samsung platform together in
a sub-directory for easy maintenance.
Signed-off-by: Sachin Kamat
---
This patch has been inspired by a similar patch [1] from Linus Walleij for
Qualcomm drivers. I have boot tested this patch on Exynos boards and
compile tested for
USB DWC3 driver on Exynos platform does not work without its
corresponding phy driver. Hence make the PHY driver depend on
Exynos DWC3 driver and default it to yes to make things easier
for the end user.
Signed-off-by: Sachin Kamat
---
No changes since v1.
---
drivers/phy/Kconfig |2 ++
1
that they are meant to work with. This
will make life easier for end users who do not have any way knowing the
dependencies.
Signed-off-by: Sachin Kamat
---
Changes since v1:
* Added dependency on DWC2 gadget driver as suggested by Tomasz Figa.
---
drivers/phy/Kconfig | 35
Removed outdated configs. Enabled most of the configs used on latest
Exynos based platforms. This will provide a reference for users trying
to verify and test various features on Exynos based platforms and also
help in detecting breakages by widening the build coverage.
Signed-off-by: Sachin
Hi Tomasz,
On Tue, Jul 8, 2014 at 9:15 PM, Tomasz Figa wrote:
> On 30.06.2014 10:56, Sachin Kamat wrote:
>> Since the USB 2.0 PHYs are required only with EHCI/OHCI USB drivers,
>
> That's not true. They are also required for USB gadget controller
> supported by the DWC2
On Wed, Jul 2, 2014 at 3:27 PM, Uwe Kleine-König
wrote:
> ARCH_EXYNOS doesn't select NEED_MACH_MEMORY_H, so doesn't
> include and so this file is not used and can go away.
>
> Signed-off-by: Uwe Kleine-König
> ---
Reviewed-by: Sachin Kamat
Tested on Arndal
On Mon, Jun 30, 2014 at 2:26 PM, Sachin Kamat wrote:
> Since the USB 2.0 PHYs are required only with EHCI/OHCI USB drivers,
> make it depend on them and default to ARCH_EXYNOS as they are meant
> for Exynos platforms. Also, make the sub-drivers silent options enabling
> them base
On Sat, Jul 5, 2014 at 6:04 AM, Tomasz Figa wrote:
> Hi Jonghwan,
>
> On 05.07.2014 01:37, Jonghwan Choi wrote:
>> On Fri, Jul 4, 2014 at 8:23 PM, Sachin Kamat wrote:
>>
>>>> Cpumasks should be cleared before using.
>>>
>>> Please
On Wed, Jun 25, 2014 at 5:13 PM, Kukjin Kim wrote:
> Sachin Kamat wrote:
>>
>> On Fri, May 30, 2014 at 11:49 PM, Andreas Färber wrote:
>> > Am 28.05.2014 06:13, schrieb Sachin Kamat:
>> >> Almost all Exynos-series of SoCs that run in secure mode don't n
Hi Jonghwan,
On Fri, Jul 4, 2014 at 3:52 PM, Jonghwan Choi wrote:
> Cpumasks should be cleared before using.
Please explain why and what is issue observed without this.
>
> Signed-off-by: Jonghwan Choi
> ---
--
Regards,
Sachin.
--
To unsubscribe from this list: send the line "unsubscribe lin
Hi Tomasz,
On Wed, Jul 2, 2014 at 9:11 PM, Tomasz Figa wrote:
> This patch adds .request() and .free() operations to gpio_chip of
> pinctrl-samsung driver, which call pinctrl request and free helpers to
> request and free pinctrl pin along with GPIO pin.
>
> Signed-off-by: Tomasz Figa
> ---
> d
if (!IS_ENABLED(CONFIG_SMP))
> exynos_sysram_init();
>
> exynos_cpuidle_init();
If it's not too late
Reviewed-by: Sachin Kamat
--
Regards,
Sachin.
--
To unsubscribe from this list: send the line "unsubscribe linux-samsung-soc" in
the body of
Hi Tomasz,
On Fri, Jul 4, 2014 at 2:13 PM, Sachin Kamat wrote:
> Hi Tomasz,
>
> On Fri, Jul 4, 2014 at 2:03 PM, Tomasz Figa wrote:
>> Hi Sachin,
>>
>> On 04.07.2014 10:29, Sachin Kamat wrote:
>>> On Mon, Jun 23, 2014 at 5:30 PM, Sachin Kamat
>>>
Hi Tomasz,
On Fri, Jul 4, 2014 at 2:03 PM, Tomasz Figa wrote:
> Hi Sachin,
>
> On 04.07.2014 10:29, Sachin Kamat wrote:
>> On Mon, Jun 23, 2014 at 5:30 PM, Sachin Kamat
>> wrote:
>>> PINCTRL_EXYNOS is always selected by Exynos platform in its
>>> machine
On Mon, Jun 23, 2014 at 5:30 PM, Sachin Kamat wrote:
> PINCTRL_EXYNOS is always selected by Exynos platform in its
> machine Kconfig. Thus the code in the else part is never used.
> Remove it.
>
> Signed-off-by: Sachin Kamat
> ---
> arch/arm/mach-exynos/common.h |4
Hi Kukjin,
On Thu, Jul 3, 2014 at 4:16 AM, Kukjin Kim wrote:
> On 07/03/14 03:02, Tomasz Figa wrote:
>>
>> Hi Kukjin,
>>
> Hi,
>
>
>> On 30.06.2014 23:32, Kukjin Kim wrote:
>>>
>>> This series removes S5P64X0 and S5PC100 related codes in mainline,
>>> because no more user now. And if its supporti
On Wed, Jul 2, 2014 at 5:22 AM, Chanwoo Choi wrote:
> On 07/01/2014 01:10 PM, Sachin Kamat wrote:
>> Hi Chanwoo,
>>
>> On Tue, Jul 1, 2014 at 9:34 AM, Chanwoo Choi wrote:
>>> Hi Sachin,
>>>
>>> On 07/01/2014 12:33 PM, Sachin Kamat wrote:
>>&
n history for subsequent versions.
Tested on Exynos 5250 based Snow and Arndale boards. Works fine now.
Tested-by: Sachin Kamat
--
Regards,
Sachin.
--
To unsubscribe from this list: send the line "unsubscribe linux-samsung-soc" in
the body of a message to majord...@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Hi Chanwoo,
On Tue, Jul 1, 2014 at 9:34 AM, Chanwoo Choi wrote:
> Hi Sachin,
>
> On 07/01/2014 12:33 PM, Sachin Kamat wrote:
>> Hi Chanwoo,
>>
>> On Tue, Jul 1, 2014 at 6:10 AM, Chanwoo Choi wrote:
>>> This patch add TMU (Thermal Management Unit) dt node to
Hi Chanwoo,
On Tue, Jul 1, 2014 at 6:10 AM, Chanwoo Choi wrote:
> This patch add TMU (Thermal Management Unit) dt node to monitor the high
> temperature for Exynos3250.
>
> Signed-off-by: Chanwoo Choi
> Acked-by: Kyungmin Park
> ---
> This patch has a dependency on following patch [1]:
> [1] h
Hi Jaehoon,
On Mon, Jun 30, 2014 at 12:52 PM, Jaehoon Chung wrote:
> Since used the mmc_of_parse(), didn't parse the sub-node.
> So we can remove the sub-node, because almost SoC used the only one card per
> a host.
> And supports-highspeed can be replaced to "cap-mmc/sd-highspeed" property.
>
>
On Mon, Jun 23, 2014 at 10:29 AM, Tushar Behera wrote:
> 'display-timings' should be a subnode for fimd node. Moving this
> node appropriately gets the display back on Origen/Origen-Quad boards.
>
> Signed-off-by: Tushar Behera
Works fine on Origen 4210 board.
T
USB DWC3 driver on Exynos platform does not work without its
corresponding phy driver. Hence make the PHY driver depend on
Exynos DWC3 driver and default it to yes to make things easier
for the end user.
Signed-off-by: Sachin Kamat
---
drivers/phy/Kconfig |2 ++
1 file changed, 2 insertions
easier for end users who do not have any way knowing the
dependencies.
Signed-off-by: Sachin Kamat
---
drivers/phy/Kconfig | 35 +++
1 file changed, 11 insertions(+), 24 deletions(-)
diff --git a/drivers/phy/Kconfig b/drivers/phy/Kconfig
index 16a2f067c242
On Fri, Jun 27, 2014 at 10:23 PM, Olof Johansson wrote:
> On Fri, Jun 27, 2014 at 9:32 AM, Doug Anderson wrote:
>> Felipe,
>>
>> On Fri, Jun 27, 2014 at 8:59 AM, Felipe Balbi wrote:
I'll admit to not having been involved with the previous discussions,
but this seems strange to me. Are
_boot_reg()
> again.
>
> Signed-off-by: Krzysztof Kozlowski
> ---
Thanks for the patch.
Reviewed-by: Sachin Kamat
Regards,
Sachin.
--
To unsubscribe from this list: send the line "unsubscribe linux-samsung-soc" in
the body of a message to majord...@vger.kernel.org
More
Hi Kishon,
On Thu, Jun 26, 2014 at 2:19 PM, Kishon Vijay Abraham I wrote:
> Hi Sachin,
>
> On Thursday 26 June 2014 11:09 AM, Sachin Kamat wrote:
>> EHCI and OHCI drivers on Exynos platforms do not work without their
>> corresponding SoC specific phy drivers. Hence it make
Hi Vivek,
On Thu, Jun 26, 2014 at 1:55 PM, Sachin Kamat wrote:
> Hi Vivek,
>
> On Thu, Jun 26, 2014 at 1:39 PM, Vivek Gautam
> wrote:
>> Hi Sachin,
>>
>>
>> On Thu, Jun 26, 2014 at 11:09 AM, Sachin Kamat
>> wrote:
>>> EHCI and OHCI dr
Hi Vivek,
On Thu, Jun 26, 2014 at 1:39 PM, Vivek Gautam wrote:
> Hi Sachin,
>
>
> On Thu, Jun 26, 2014 at 11:09 AM, Sachin Kamat
> wrote:
>> EHCI and OHCI drivers on Exynos platforms do not work without their
>> corresponding SoC specific phy drivers. Hence it make
ARCH_EXYNOS as this IP is available only on Exynos5 platforms.
Signed-off-by: Sachin Kamat
Cc: Kishon Vijay Abraham I
---
drivers/phy/Kconfig |8 +---
drivers/usb/dwc3/Kconfig |3 ++-
2 files changed, 3 insertions(+), 8 deletions(-)
diff --git a/drivers/phy/Kconfig b/drivers/phy
for Exynos 5420 SoC too.
Signed-off-by: Sachin Kamat
Cc: Kishon Vijay Abraham I
---
drivers/phy/Kconfig | 37 +++--
drivers/usb/host/Kconfig | 10 ++
2 files changed, 13 insertions(+), 34 deletions(-)
diff --git a/drivers/phy/Kconfig b/drivers
Hi Naveen,
On Wed, Jun 25, 2014 at 4:08 PM, Naveen Krishna Chatradhi
wrote:
> This patch removes an extra line and fixes a styling nit
> in exynos5_i2c_message_start()
>
> Signed-off-by: Naveen Krishna Chatradhi
> ---
> drivers/i2c/busses/i2c-exynos5.c |3 +--
> 1 file changed, 1 insertion(
All Exynos5 platforms have HSI2C controllers and are needed by
various IPs connected to the boards based on these SoCs. Thus
select this by default for Exynos5 platforms.
Signed-off-by: Sachin Kamat
Cc: Doug Anderson
---
drivers/i2c/busses/Kconfig |4 ++--
1 file changed, 2 insertions
.
Signed-off-by: Sachin Kamat
---
arch/arm/Kconfig.debug | 20
1 file changed, 4 insertions(+), 16 deletions(-)
diff --git a/arch/arm/Kconfig.debug b/arch/arm/Kconfig.debug
index 3548612b0bfe..b92993e59a12 100644
--- a/arch/arm/Kconfig.debug
+++ b/arch/arm/Kconfig.debug
PINCTRL_EXYNOS is always selected by Exynos platform in its
machine Kconfig. Thus the code in the else part is never used.
Remove it.
Signed-off-by: Sachin Kamat
---
arch/arm/mach-exynos/common.h |4
1 file changed, 4 deletions(-)
diff --git a/arch/arm/mach-exynos/common.h b/arch/arm
On Fri, May 30, 2014 at 11:49 PM, Andreas Färber wrote:
> Am 28.05.2014 06:13, schrieb Sachin Kamat:
>> Almost all Exynos-series of SoCs that run in secure mode don't need
>> additional offset for every CPU, with Exynos4412 being the only
>> exception.
>>
>>
Hi Tim,
On Sat, Jun 21, 2014 at 2:31 AM, Tim Kryger wrote:
> On Thu, Jun 19, 2014 at 8:33 PM, Sachin Kamat wrote:
>> On Thu, Jun 19, 2014 at 6:11 PM, Jaehoon Chung
>> wrote:
>>> On 06/19/2014 07:40 PM, Sachin Kamat wrote:
>>>> On Thu, Jun 19, 2014 at 2:40
s2m_osc: clocks {
> compatible = "samsung,s2mps11-clk";
> - #clock-cells = 1;
> + #clock-cells = <1>;
> clock-output-names = "xx", "yy", "zz";
; - valid values for n are 1 to 28
> - - Example: LDO1, LD02, LDO28
> + - Example: LDO1, LDO2, LDO28
> - BUCKn
> - valid values for n are 1 to 9.
> - Example: BUCK1, BUCK2, BUCK9
> --
On Thu, Jun 19, 2014 at 6:11 PM, Jaehoon Chung wrote:
> On 06/19/2014 07:40 PM, Sachin Kamat wrote:
>> On Thu, Jun 19, 2014 at 2:40 PM, Tim Kryger wrote:
>>> On Thu, Jun 19, 2014 at 1:49 AM, Sachin Kamat wrote:
>>>> +cc Some relevant guys from Samsung
>>>
On Thu, Jun 19, 2014 at 2:40 PM, Tim Kryger wrote:
> On Thu, Jun 19, 2014 at 1:49 AM, Sachin Kamat wrote:
>> +cc Some relevant guys from Samsung
>>
>> On Thu, Jun 19, 2014 at 2:12 PM, Tim Kryger wrote:
>>> On Wed, Jun 18, 2014 at 8:54 PM, Sachin Kamat wrote:
>&
+cc Some relevant guys from Samsung
On Thu, Jun 19, 2014 at 2:12 PM, Tim Kryger wrote:
> On Wed, Jun 18, 2014 at 8:54 PM, Sachin Kamat wrote:
>
>>> On Wed, Jun 18, 2014 at 4:33 AM, Sachin Kamat wrote:
>
>>>> I see the below error on Exynos4210 based Origen board
lls = <2>;
> + #pwm-cells = <3>;
> status = "disabled";
> };
I think I had already reviewed this patch. Anyway,
Reviewed-by: Sachin Kamat
--
To unsubscribe from this list: send the line "unsubscribe linux-samsung-soc" in
the body of a message to majord...@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
t;mout_aclk200_disp1_sub",
> - GATE_IP_DISP1, 2, 0, 0),
> + GATE_IP_DISP1, 9, 0, 0),
SysMMU TV corresponds to bit 9 as per user manual of 5250.
Reviewed-by: Sachin Kamat
--
To unsubscribe from this list: send the line "unsubscribe linux-samsung-soc" in
the body of a message to majord...@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
On Wed, Jun 18, 2014 at 7:41 PM, Tim Kryger wrote:
> On Wed, Jun 18, 2014 at 4:33 AM, Sachin Kamat wrote:
>> Hi Tim,
>>
>> I see the below error on Exynos4210 based Origen board with linux-next
>> (20140618).
>> Reverting the below commit works fine.
>>
>
Hi Tim,
I see the below error on Exynos4210 based Origen board with linux-next
(20140618).
Reverting the below commit works fine.
Commit: 8d02e775a6 "mmc: sdhci: Use mmc core regulator infrastucture"
Any ideas?
***
-- [2.068992] sdhci: Secure Digital Host Controller Interface d
Hi Ulf,
On Wed, Jun 18, 2014 at 4:43 PM, Ulf Hansson wrote:
> On 18 June 2014 13:10, Sachin Kamat wrote:
>> Hi Jaehoon,
>>
>> On Wed, Jun 18, 2014 at 3:50 PM, Jaehoon Chung
>> wrote:
>>> Hi, Sachin.
>>>
>>> Did you check the below
Hi Jaehoon,
On Wed, Jun 18, 2014 at 3:50 PM, Jaehoon Chung wrote:
> Hi, Sachin.
>
> Did you check the below patch?
> https://patchwork.kernel.org/patch/4346781/
Thanks for the patch. But even with this patch, I continue to get the
aforementioned crash.
>
> I will resend the patch after includin
Hi Jaehoon,
I get the below crash on Exyos5250 based Arndale board with linux-next
(20140618) kernel.
Looks like the following patch is causing it
Commit da118915cc72 " mmc: dw_mmc: replace "disable-wp" from slot's
quirk to host's quirk"
Reverting the above patch fixes the issue.
The below chang
Hi Srivatsa,
On Tue, Jun 17, 2014 at 3:24 PM, Srivatsa S. Bhat
wrote:
> On 06/17/2014 03:03 PM, Sachin Kamat wrote:
>
>>> Below is an updated patch, please let me know how it goes. (You'll have to
>>> revert c47a9d7cca first, and then 56e692182, before trying this
Hi Srivatsa,
Thanks for your prompt reply.
On Tue, Jun 17, 2014 at 2:48 PM, Srivatsa S. Bhat
wrote:
> Hi Sachin,
>
> On 06/17/2014 01:39 PM, Sachin Kamat wrote:
>> Hi,
>>
>> I observe the below warnings while trying to boot Exynos5420 based boards
>> since yest
Hi,
I observe the below warnings while trying to boot Exynos5420 based boards
since yesterday's linux-next (next-20140616) using multi_v7_defconfig. Looks
like it is triggered by the commit 56e6921829 ("CPU hotplug, smp:
flush any pending IPI callbacks before CPU offline"). Any ideas?
**
Kukjin,
On Sat, May 31, 2014 at 12:12 AM, Kukjin Kim wrote:
> On 05/31/14 03:19, Andreas Färber wrote:
>>
>> Am 28.05.2014 06:13, schrieb Sachin Kamat:
>>>
>>> Almost all Exynos-series of SoCs that run in secure mode don't need
>>> additional offse
;0 37 0>, <0 38 0>, <0 39 0>, <0 40 0>, <0 41 0>;
> clocks = <&clock CLK_PWM>;
> clock-names = "timers";
> - #pwm-cells = <2>;
> + #pwm-cells = <3>;
> s
Hi Naveen,
On Tue, Jun 10, 2014 at 2:30 PM, Naveen Krishna Chatradhi
wrote:
> This patch returns an integer error value instead of the
> pointer.
>
> "warning: return makes integer from pointer without a cast"
>
> Signed-off-by: Naveen Krishna Chatradhi
> Cc: Javier Martinez Canillas
> Cc: Doug
Hi Arnd,
On Tue, Jun 3, 2014 at 3:23 PM, Arnd Bergmann wrote:
> commit e4ac92df2791 ("serial: samsung: Neaten dbg uses") introduced
> a regression in the conversion from vsprintf to vsnprintf.
>
> This fixes the build error by passing the correct variable name.
I submitted a similar patch someti
Hi Wolfram,
On Tue, Jun 3, 2014 at 3:35 PM, Wolfram Sang wrote:
> On Tue, Jun 03, 2014 at 02:30:22PM +0530, Sachin Kamat wrote:
>> With multiplatform support enabled for Exynos, class based
>> instantiation causes a boot time delay due to I2C_CLASS_HWMON
>> triggered pro
With multiplatform support enabled for Exynos, class based
instantiation causes a boot time delay due to I2C_CLASS_HWMON
triggered probe. Since class based instantiation has been
deprecated since some time now, remove it for Samsung I2C driver.
Signed-off-by: Sachin Kamat
Cc: Olof Johansson
+ Olof
On 26 May 2014 12:19, Sachin Kamat wrote:
> Thanks Abhilash.
>
> On 26 May 2014 11:24, Abhilash Kesavan wrote:
>> This fixes the following build errors:
>>
>> /tmp/ccRbZlaA.s: Assembler messages:
>> /tmp/ccRbZlaA.s:69: Error: selected process
Hi Tomasz,
On 28 May 2014 16:32, Tomasz Figa wrote:
> Hi Sachin,
>
> On 28.05.2014 10:01, Sachin Kamat wrote:
>> On 21 May 2014 17:28, Sachin Kamat wrote:
>>> Local symbols are made static.
>>>
>>> Signed-off-by: Sachin Kamat
>>> -
dw_pcie_host_init is wrong.
Reported-by: kbuild test robot
Signed-off-by: Sachin Kamat
---
drivers/pci/host/pci-exynos.c |3 ++-
1 file changed, 2 insertions(+), 1 deletion(-)
diff --git a/drivers/pci/host/pci-exynos.c b/drivers/pci/host/pci-exynos.c
index 3de6bfbbe8e9..3c1ff89829ec 100644
--- a
On 21 May 2014 17:28, Sachin Kamat wrote:
> Local symbols are made static.
>
> Signed-off-by: Sachin Kamat
> ---
> drivers/clk/samsung/clk-exynos5420.c | 10 +-
> 1 file changed, 5 insertions(+), 5 deletions(-)
>
> diff --git a/drivers/clk/samsung/clk-exyno
On 28 May 2014 09:23, Sachin Kamat wrote:
> Hi Kukjin,
>
> On 27 May 2014 21:09, Kukjin Kim wrote:
>> On 05/26/14 12:29, Sachin Kamat wrote:
>>>
>>> On 23 May 2014 11:38, Sachin Kamat wrote:
>>>>
>>>> Enabled RTC node on Origen 42
Almost all Exynos-series of SoCs that run in secure mode don't need
additional offset for every CPU, with Exynos4412 being the only
exception.
Tested on Origen-Quad (Exynos4412) and Arndale-Octa (Exynos5420).
While at it, fix the coding style (space around *).
Signed-off-by: Sachin
From: Tushar Behera
Arndale-Octa board is always configured to work with trustzone
firmware binary. Added DTS node entry to enable this support.
Signed-off-by: Tushar Behera
Signed-off-by: Sachin Kamat
---
arch/arm/boot/dts/exynos5420-arndale-octa.dts |5 +
1 file changed, 5
Hi Kukjin,
On 27 May 2014 21:09, Kukjin Kim wrote:
> On 05/26/14 12:29, Sachin Kamat wrote:
>>
>> On 23 May 2014 11:38, Sachin Kamat wrote:
>>>
>>> Enabled RTC node on Origen 4210 and 4412 boards.
>>>
>>> Signed-off-by: Sachin Kamat
>>&
processor does not support ARM mode `dsb'
> make[1]: *** [arch/arm/mach-exynos/mcpm-exynos.o] Error 1
>
> Reported-by: Sachin Kamat
> Signed-off-by: Abhilash Kesavan
This patch fixes the above reported issues.
Tested-by: Sachin Kamat
--
With warm regards,
Sachin
--
To unsubscri
(unknown).
This is often because exynos4_clk_sleep_init lacks a __initdata
annotation or the annotation of (unknown) is wrong.
Signed-off-by: Sachin Kamat
Reported-by: kbuild test robot
---
drivers/clk/samsung/clk-exynos4.c |4 ++--
1 file changed, 2 insertions(+), 2 deletions(-)
diff
On 21 May 2014 17:28, Sachin Kamat wrote:
> Local symbols are made static.
>
> Signed-off-by: Sachin Kamat
> ---
> drivers/clk/samsung/clk-exynos5420.c | 10 +-
> 1 file changed, 5 insertions(+), 5 deletions(-)
>
> diff --git a/drivers/clk/samsung/clk-exyno
On 23 May 2014 11:38, Sachin Kamat wrote:
> Enabled RTC node on Origen 4210 and 4412 boards.
>
> Signed-off-by: Sachin Kamat
> ---
> arch/arm/boot/dts/exynos4210-origen.dts |4
> arch/arm/boot/dts/exynos4412-origen.dts |4
> 2 files changed, 8 insertion
480 c038dacc c051 c051
>> c0518480 c038dacc eefc5cf8
>> [3.271689] 1fa0: c0543210 c004e990 c0511fb4 c03873b8
>> c04f90c8 c04d4b18
>> [3.279848] 1fc0: c04d457c 0000
>> c04f90c8 10c5387d
>> [
On 20 May 2014 09:20, Tushar Behera wrote:
> From: Sachin Kamat
>
> Almost all Exynos-series of SoCs that run in secure mode don't need
> additional offset for every CPU, with Exynos4412 being the only
> exception.
>
> Tested on Origen-Quad (Exynos4412) and Arndale-Oc
Enable Exynos platform and its related IPs.
Signed-off-by: Sachin Kamat
---
No changes since v1.
---
arch/arm/configs/multi_v7_defconfig | 12
1 file changed, 12 insertions(+)
diff --git a/arch/arm/configs/multi_v7_defconfig
b/arch/arm/configs/multi_v7_defconfig
index
Instead of repeating the Kconfig entries for every SoC, move them under
ARCH_EXYNOS4 and 5 and move the entries common to both 4 and 5 under
ARCH_EXYNOS.
Signed-off-by: Sachin Kamat
---
No changes since v1
---
arch/arm/Kconfig | 10 ++
arch/arm/mach-exynos/Kconfig | 45
suggested by Arnd.
Arnd Bergmann (1):
ARM: EXYNOS: Enable multi-platform build support
Sachin Kamat (2):
ARM: EXYNOS: Consolidate Kconfig entries
ARM: multi_v7_defconfig: Enable Exynos platform
arch/arm/Kconfig| 20 ---
arch/arm/configs/multi_v7_defconfig | 12
From: Arnd Bergmann
This makes it possible to enable the Exynos platform as part of a
multiplatform kernel.
Signed-off-by: Arnd Bergmann
Signed-off-by: Sachin Kamat
---
Changes since v1:
Dropped duplicate config symbols as suggested by Arnd.
Updated commit log.
---
arch/arm/Kconfig
Hi Andrzej,
On 23 May 2014 16:27, Andrzej Hajda wrote:
> The patch fixes unlocking in exynos_drm_component_del.
This patch actually removes multiple unlocking issue.
>
> Signed-off-by: Andrzej Hajda
> ---
> Hi Inki,
>
> This patch is based on exynos_drm_next branch.
>
> Regards
> Andrzej
> ---
On 23 May 2014 16:28, Andrzej Hajda wrote:
> The patch removes dependency on !ARCH_MULTIPLATFORM.
> This dependency seems to be not longer valid.
>
> Signed-off-by: Andrzej Hajda
Reviewed-by: Sachin Kamat
--
With warm regards,
Sachin
--
To unsubscribe from this list: s
Key code macros improve readability.
Signed-off-by: Sachin Kamat
---
arch/arm/boot/dts/exynos4210-origen.dts | 11 ++-
arch/arm/boot/dts/exynos4412-origen.dts | 13 +++--
2 files changed, 13 insertions(+), 11 deletions(-)
diff --git a/arch/arm/boot/dts/exynos4210-origen.dts
Key code macros improve readability.
Signed-off-by: Sachin Kamat
---
arch/arm/boot/dts/exynos5250-arndale.dts | 13 +++--
1 file changed, 7 insertions(+), 6 deletions(-)
diff --git a/arch/arm/boot/dts/exynos5250-arndale.dts
b/arch/arm/boot/dts/exynos5250-arndale.dts
index
Enabled RTC node on Origen 4210 and 4412 boards.
Signed-off-by: Sachin Kamat
---
arch/arm/boot/dts/exynos4210-origen.dts |4
arch/arm/boot/dts/exynos4412-origen.dts |4
2 files changed, 8 insertions(+)
diff --git a/arch/arm/boot/dts/exynos4210-origen.dts
b/arch/arm/boot/dts
Enabled watchdog nodes on Origen 4210 and 4412 boards.
Signed-off-by: Sachin Kamat
---
arch/arm/boot/dts/exynos4210-origen.dts |4
arch/arm/boot/dts/exynos4412-origen.dts |4
2 files changed, 8 insertions(+)
diff --git a/arch/arm/boot/dts/exynos4210-origen.dts
b/arch/arm
1 - 100 of 874 matches
Mail list logo