Re: [PATCH v3 0/4] video: s3c-fb: Rearrange the elements in platform data

2012-04-11 Thread Florian Tobias Schandinat
On 03/24/2012 04:28 PM, Thomas Abraham wrote:
 Changes since v2:
 - Patch 3/4 is a new patch in this series. The real6410 and mini6410 boards
   use the display controllers window configuration data to represent video
   timing of two different lcd panels. Since the window configuration data
   should be not be used to specify timing of two different panels, this has
   been reworked in such a way that two instance of display controller's
   platform data is setup for the two supported lcd panels. Depending on the
   lcd panel specified using boot parameters, the corresponding platform data
   is registered. This maintains backward compatibility with existing
   functionality of supporting multiple lcd panels at runtime.
 
 Changes since v1:
 - Includes all changes suggested by Jingoo Han.
 - Reworked s3c-fb platform data in all Samsung SoC based board files.
 
 This patchset rearranges the elements in the platform data of the s3c-fb
 driver with the intent of adding device tree support to the driver in
 subsequent patches.
 
 The first patch moves the video timing information from the individual window
 setup data into the platform specific configuration section in the platform
 data. The video timing is independent of the window setup. The resolution of
 the window could be smaller than that of the lcd panel attached. So the video
 timing data is removed from window configuration data.
 
 The second patch removes the need for the 'default_win' element in the
 platform data. This element was used to decide whether the video data
 output from the controller should be enabled or disabled when the window
 specified by 'default_win' is enabled or disabled. With the first patch
 removing the need for atleast one window to be of the same resolution as
 that of the lcd panel, it is now possible to decide when to enable/disable
 the video data output based on the state of each window. If any of the
 window is active, the lcd data output is enabled. Otherwise, the lcd data
 output is disabled. Hence, the 'default_win' parameter from the platform
 data can be removed, which anyways cannot be specified when using
 device tree.
 
 The third patch reworks the display controller's platform data that was
 used to supply video timing information for two different panels on the
 mini6410 and real6410 boards. That was not the correct usage of the window
 data and hence reworks the runtime handling of two different lcd panels.
 
 For all the Samsung SoC based boards, the forth patch reworks the platform
 data of the display controller based on the changes introduced in the first
 two patches.
 
 This patch series is based on
 http://git.kernel.org/pub/scm/linux/kernel/git/kgene/linux-samsung.git 
 [for-next]
 
 with all patches merged from
 https://github.com/schandinat/linux-2.6.git [fbdev-next]
 
 and tested one Exynos4210 based Origen board (only compile tested for
 other boards)
 
 Thomas Abraham (4):
   video: s3c-fb: move video interface timing out of window setup data
   video: s3c-fb: remove 'default_win' element from platform data
   ARM: s3c64xx: Decouple lcd type from display controller window data
   ARM: Samsung: Rework platform data of s3c-fb driver

Applied this series.


Thanks,

Florian Tobias Schandinat

 
  arch/arm/mach-exynos/mach-nuri.c   |   26 +++---
  arch/arm/mach-exynos/mach-origen.c |   24 +++--
  arch/arm/mach-exynos/mach-smdkv310.c   |   28 ---
  arch/arm/mach-exynos/mach-universal_c210.c |   26 +++---
  arch/arm/mach-s3c24xx/mach-smdk2416.c  |   27 +++---
  arch/arm/mach-s3c64xx/mach-anw6410.c   |   25 +++---
  arch/arm/mach-s3c64xx/mach-crag6410.c  |   25 +++---
  arch/arm/mach-s3c64xx/mach-hmt.c   |   24 +++--
  arch/arm/mach-s3c64xx/mach-mini6410.c  |   92 +++
  arch/arm/mach-s3c64xx/mach-real6410.c  |   90 +++
  arch/arm/mach-s3c64xx/mach-smartq5.c   |   26 +++---
  arch/arm/mach-s3c64xx/mach-smartq7.c   |   26 +++---
  arch/arm/mach-s3c64xx/mach-smdk6410.c  |   25 +++---
  arch/arm/mach-s5p64x0/mach-smdk6440.c  |   24 +++--
  arch/arm/mach-s5p64x0/mach-smdk6450.c  |   24 +++--
  arch/arm/mach-s5pc100/mach-smdkc100.c  |   27 +++---
  arch/arm/mach-s5pv210/mach-aquila.c|   36 
  arch/arm/mach-s5pv210/mach-goni.c  |   26 +++---
  arch/arm/mach-s5pv210/mach-smdkv210.c  |   24 +++--
  arch/arm/plat-samsung/include/plat/fb.h|   11 ++-
  drivers/video/s3c-fb.c |  135 +--
  21 files changed, 426 insertions(+), 345 deletions(-)
 
 

--
To unsubscribe from this list: send the line unsubscribe linux-samsung-soc in
the body of a message to majord...@vger.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html


[PATCH v3 0/4] video: s3c-fb: Rearrange the elements in platform data

2012-03-24 Thread Thomas Abraham
Changes since v2:
- Patch 3/4 is a new patch in this series. The real6410 and mini6410 boards
  use the display controllers window configuration data to represent video
  timing of two different lcd panels. Since the window configuration data
  should be not be used to specify timing of two different panels, this has
  been reworked in such a way that two instance of display controller's
  platform data is setup for the two supported lcd panels. Depending on the
  lcd panel specified using boot parameters, the corresponding platform data
  is registered. This maintains backward compatibility with existing
  functionality of supporting multiple lcd panels at runtime.

Changes since v1:
- Includes all changes suggested by Jingoo Han.
- Reworked s3c-fb platform data in all Samsung SoC based board files.

This patchset rearranges the elements in the platform data of the s3c-fb
driver with the intent of adding device tree support to the driver in
subsequent patches.

The first patch moves the video timing information from the individual window
setup data into the platform specific configuration section in the platform
data. The video timing is independent of the window setup. The resolution of
the window could be smaller than that of the lcd panel attached. So the video
timing data is removed from window configuration data.

The second patch removes the need for the 'default_win' element in the
platform data. This element was used to decide whether the video data
output from the controller should be enabled or disabled when the window
specified by 'default_win' is enabled or disabled. With the first patch
removing the need for atleast one window to be of the same resolution as
that of the lcd panel, it is now possible to decide when to enable/disable
the video data output based on the state of each window. If any of the
window is active, the lcd data output is enabled. Otherwise, the lcd data
output is disabled. Hence, the 'default_win' parameter from the platform
data can be removed, which anyways cannot be specified when using
device tree.

The third patch reworks the display controller's platform data that was
used to supply video timing information for two different panels on the
mini6410 and real6410 boards. That was not the correct usage of the window
data and hence reworks the runtime handling of two different lcd panels.

For all the Samsung SoC based boards, the forth patch reworks the platform
data of the display controller based on the changes introduced in the first
two patches.

This patch series is based on
http://git.kernel.org/pub/scm/linux/kernel/git/kgene/linux-samsung.git 
[for-next]

with all patches merged from
https://github.com/schandinat/linux-2.6.git [fbdev-next]

and tested one Exynos4210 based Origen board (only compile tested for
other boards)

Thomas Abraham (4):
  video: s3c-fb: move video interface timing out of window setup data
  video: s3c-fb: remove 'default_win' element from platform data
  ARM: s3c64xx: Decouple lcd type from display controller window data
  ARM: Samsung: Rework platform data of s3c-fb driver

 arch/arm/mach-exynos/mach-nuri.c   |   26 +++---
 arch/arm/mach-exynos/mach-origen.c |   24 +++--
 arch/arm/mach-exynos/mach-smdkv310.c   |   28 ---
 arch/arm/mach-exynos/mach-universal_c210.c |   26 +++---
 arch/arm/mach-s3c24xx/mach-smdk2416.c  |   27 +++---
 arch/arm/mach-s3c64xx/mach-anw6410.c   |   25 +++---
 arch/arm/mach-s3c64xx/mach-crag6410.c  |   25 +++---
 arch/arm/mach-s3c64xx/mach-hmt.c   |   24 +++--
 arch/arm/mach-s3c64xx/mach-mini6410.c  |   92 +++
 arch/arm/mach-s3c64xx/mach-real6410.c  |   90 +++
 arch/arm/mach-s3c64xx/mach-smartq5.c   |   26 +++---
 arch/arm/mach-s3c64xx/mach-smartq7.c   |   26 +++---
 arch/arm/mach-s3c64xx/mach-smdk6410.c  |   25 +++---
 arch/arm/mach-s5p64x0/mach-smdk6440.c  |   24 +++--
 arch/arm/mach-s5p64x0/mach-smdk6450.c  |   24 +++--
 arch/arm/mach-s5pc100/mach-smdkc100.c  |   27 +++---
 arch/arm/mach-s5pv210/mach-aquila.c|   36 
 arch/arm/mach-s5pv210/mach-goni.c  |   26 +++---
 arch/arm/mach-s5pv210/mach-smdkv210.c  |   24 +++--
 arch/arm/plat-samsung/include/plat/fb.h|   11 ++-
 drivers/video/s3c-fb.c |  135 +--
 21 files changed, 426 insertions(+), 345 deletions(-)

--
To unsubscribe from this list: send the line unsubscribe linux-samsung-soc in
the body of a message to majord...@vger.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html