Hello,
On 2015-06-12 14:00, Thomas-Karl Pietrowski wrote:
Hello everyone,
I'm just trying to get my kernel built for my Odroid U3, but no matter whether
I use 4.0.x or the latest code from arm-soc repository 4.1.0-rc3, it ends at
this message during boot:
###
U-Boot 2015.07-rc1-00408-g012681b (May 30 2015 - 17:49:11 +)
CPU:Exynos4412@1000MHz
Model: Odroid based on Exynos4412
DRAM: 2 GiB
ERROR: regulator-name of dev: ldo18, has nonunique value: nc
at drivers/power/regulator/regulator-uclass.c:294/regulator_post_bind()
ERROR: regulator-name of dev: ldo19, has nonunique value: nc
at drivers/power/regulator/regulator-uclass.c:294/regulator_post_bind()
ERROR: regulator-name of dev: ldo23, has nonunique value: nc
at drivers/power/regulator/regulator-uclass.c:294/regulator_post_bind()
ERROR: regulator-name of dev: ldo24, has nonunique value: nc
at drivers/power/regulator/regulator-uclass.c:294/regulator_post_bind()
ERROR: regulator-name of dev: ldo26, has nonunique value: nc
at drivers/power/regulator/regulator-uclass.c:294/regulator_post_bind()
ERROR: regulator-name of dev: buck9, has nonunique value: nc
at drivers/power/regulator/regulator-uclass.c:294/regulator_post_bind()
ldo20@VDDQ_EMMC_1.8V: set 180 uV; enabling
ldo22@VDDQ_EMMC_2.8V: set 280 uV; enabling
ldo21@TFLASH_2.8V: set 280 uV; enabling
MMC: SAMSUNG SDHCI: 0, EXYNOS DWMMC: 1
Net: No ethernet found.
Hit any key to stop autoboot: 0
reading boot.scr
1143 bytes read in 18 ms (61.5 KiB/s)
## Executing script at 40408000
reading zImage-4.1
2497840 bytes read in 141 ms (16.9 MiB/s)
reading exynos4412-odroidu3.dtb
54489 bytes read in 25 ms (2.1 MiB/s)
Kernel image @ 0x40008000 [ 0x00 - 0x261d30 ]
## Flattened Device Tree blob at 41f0
Booting using the fdt blob at 0x41f0
reserving fdt memory region: addr=41f0 size=e000
Using Device Tree in place at 41f0, end 41f10fff
Starting kernel ...
###
The error messages during uboot loading just appear because there is something
missing in it's RC, but don't think it is the reason, because a old build
(3.19.x) just boots.
Sadly my serial output does not give better error messages, so I'm asking
here, because google'ing around didn't point me to any solutions.
Do you have any hints why that happens? My .config can be found here -
http://pastebin.com/qRLmtmmt . Is there a way to get early error messages
during boot?
Please goto 'Kernel hacking' page and enable 'Kernel low-level debugging
functions' with 'Use Samsung S3C UART 1 for low-level debug' and then
also enable 'Early printk'. Then add 'earlyprintk' to your kernel cmd
line. I hope you are using the exynos4412-odroidu3.dtb compiled from the
same kernel tree as zImage.
Best regards
--
Marek Szyprowski, PhD
Samsung RD Institute Poland
--
To unsubscribe from this list: send the line unsubscribe linux-samsung-soc in
the body of a message to majord...@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
