Re: [PATCH 2/2] ARM: Exynos4: use s5p-timer for UniversalC210 board
On Thu, Sep 15, 2011 at 4:38 PM, Kukjin Kim wrote: > Kyungmin Park wrote: >> >> On Thu, Sep 15, 2011 at 3:03 PM, Kukjin Kim wrote: >> > Kukjin Kim wrote: >> >> >> >> Kyungmin Park wrote: >> >> > >> >> > Hi, >> >> > >> >> > It's required for boot universal c210 w/ EVT0 chip. >> >> > Can you include it at 3.1 fixed branch? >> >> > >> >> Sure, will apply into samsung-fixes for 3.1. >> > >> > Unfortunately, it happens boot failure with this patch on other > EXYNOS4210 >> > boards and it is due to HAVE_SCHED_CLOCK. >> > >> >> > > + select HAVE_SCHED_CLOCK >> > >> > I think, we need to sort out the method... >> As sched_clock_postinit is called at generic time code by >> HAVE_SCHED_CLOCK. and there's no sched_clock_update_fn() is defined. >> As a work-around, you can test it. >> >> static void sched_clock_poll(unsigned long wrap_ticks) >> { >> mod_timer(&sched_clock_timer, round_jiffies(jiffies + > wrap_ticks)); >> if (sched_clock_update_fn) >> sched_clock_update_fn(); >> } >> > > Following is better than above but need Russell's review Right, during the make a patch, I also found it. Check the patch And boot tested both EVT0 and others. > > diff --git a/arch/arm/kernel/sched_clock.c b/arch/arm/kernel/sched_clock.c > index 9a46370..b1a1283 100644 > --- a/arch/arm/kernel/sched_clock.c > +++ b/arch/arm/kernel/sched_clock.c > @@ -70,5 +70,6 @@ void __init init_sched_clock(struct clock_data *cd, void > (*update)(void), > > void __init sched_clock_postinit(void) > { > - sched_clock_poll(sched_clock_timer.data); > + if (sched_clock_update_fn) > + sched_clock_poll(sched_clock_timer.data); > } > > >> To solve the problem correctly. you can add init_sched_clock at >> "arch/arm/mach-exynos4/mct.c" properly >> >> Please test the work-around and share the result. I'll try to find the >> proper place to add init_sched_clock at mct.c >> >> Thank you, >> Kyungmin Park >> >> >> > >> > Thanks. >> > >> > Best regards, >> > Kgene. >> > -- >> > Kukjin Kim , Senior Engineer, >> > SW Solution Development Team, Samsung Electronics Co., Ltd. >> > >> >> >> >> > Thank you, >> >> > Kyungmin Park >> >> > >> >> > On Tue, Jul 26, 2011 at 2:50 PM, Marek Szyprowski >> >> > wrote: >> >> > > Commit 069d4e743 removed support for local timers and forced to use >> > MCT >> >> as >> >> > > event source. However MCT is not operating properly on early > revision >> > (EVT0) >> >> > > of Exynos4 SoCs. All UniversalC210 boards are based on Exynos4 > EVT0, >> > so >> >> > that >> >> > > commit broke support for it. This patch provides a workaround that >> > enables >> >> > > UniversalC210 boards to boot again. s5p-timer is used as an event >> > source. >> >> > > >> >> > > Signed-off-by: Marek Szyprowski >> >> > > Signed-off-by: Kyungmin Park >> >> > > --- >> >> > > arch/arm/mach-exynos4/Kconfig | 3 +++ >> >> > > arch/arm/mach-exynos4/mach-universal_c210.c | 4 +++- >> >> > > 2 files changed, 6 insertions(+), 1 deletions(-) >> >> > > >> >> > > diff --git a/arch/arm/mach-exynos4/Kconfig >> > b/arch/arm/mach-exynos4/Kconfig >> >> > > index 9d62e13..2aad73f 100644 >> >> > > --- a/arch/arm/mach-exynos4/Kconfig >> >> > > +++ b/arch/arm/mach-exynos4/Kconfig >> >> > > @@ -173,6 +173,9 @@ config MACH_ARMLEX4210 >> >> > > config MACH_UNIVERSAL_C210 >> >> > > bool "Mobile UNIVERSAL_C210 Board" >> >> > > select CPU_EXYNOS4210 >> >> > > + select S5P_HRT >> >> > > + select CLKSRC_MMIO >> >> > > + select HAVE_SCHED_CLOCK >> >> > > select S5P_GPIO_INT >> >> > > select S5P_DEV_FIMC0 >> >> > > select S5P_DEV_FIMC1 >> >> > > diff --git a/arch/arm/mach-exynos4/mach-universal_c210.c >> > b/arch/arm/mach- >> >> > exynos4/mach-universal_c210.c >> >> > > index 0e280d1..ca9e7b7 100644 >> >> > > --- a/arch/arm/mach-exynos4/mach-universal_c210.c >> >> > > +++ b/arch/arm/mach-exynos4/mach-universal_c210.c >> >> > > @@ -34,6 +34,7 @@ >> >> > > #include >> >> > > #include >> >> > > #include >> >> > > +#include >> >> > > >> >> > > #include >> >> > > >> >> > > @@ -730,6 +731,7 @@ static void __init universal_map_io(void) >> >> > > s5p_init_io(NULL, 0, S5P_VA_CHIPID); >> >> > > s3c24xx_init_clocks(2400); >> >> > > s3c24xx_init_uarts(universal_uartcfgs, >> > ARRAY_SIZE(universal_uartcfgs)); >> >> > > + s5p_set_timer_source(S5P_PWM2, S5P_PWM4); >> >> > > } >> >> > > >> >> > > static void __init universal_reserve(void) >> >> > > @@ -766,6 +768,6 @@ MACHINE_START(UNIVERSAL_C210, >> >> > "UNIVERSAL_C210") >> >> > > .init_irq = exynos4_init_irq, >> >> > > .map_io = universal_map_io, >> >> > > .init_machine = universal_machine_init, >> >> > > - .timer = &exynos4_timer, >> >> > > + .timer = &s5p_timer, >> >> > > .reserve = &universal_reserve, >> >> > > MACHINE_END >> >> > > -- >> >> > > 1.7.1.569.g6f426 >> >> > > >> >> > > --
RE: [PATCH 2/2] ARM: Exynos4: use s5p-timer for UniversalC210 board
Kyungmin Park wrote: > > On Thu, Sep 15, 2011 at 3:03 PM, Kukjin Kim wrote: > > Kukjin Kim wrote: > >> > >> Kyungmin Park wrote: > >> > > >> > Hi, > >> > > >> > It's required for boot universal c210 w/ EVT0 chip. > >> > Can you include it at 3.1 fixed branch? > >> > > >> Sure, will apply into samsung-fixes for 3.1. > > > > Unfortunately, it happens boot failure with this patch on other EXYNOS4210 > > boards and it is due to HAVE_SCHED_CLOCK. > > > >> > > + select HAVE_SCHED_CLOCK > > > > I think, we need to sort out the method... > As sched_clock_postinit is called at generic time code by > HAVE_SCHED_CLOCK. and there's no sched_clock_update_fn() is defined. > As a work-around, you can test it. > > static void sched_clock_poll(unsigned long wrap_ticks) > { > mod_timer(&sched_clock_timer, round_jiffies(jiffies + wrap_ticks)); > if (sched_clock_update_fn) > sched_clock_update_fn(); > } > Following is better than above but need Russell's review diff --git a/arch/arm/kernel/sched_clock.c b/arch/arm/kernel/sched_clock.c index 9a46370..b1a1283 100644 --- a/arch/arm/kernel/sched_clock.c +++ b/arch/arm/kernel/sched_clock.c @@ -70,5 +70,6 @@ void __init init_sched_clock(struct clock_data *cd, void (*update)(void), void __init sched_clock_postinit(void) { - sched_clock_poll(sched_clock_timer.data); + if (sched_clock_update_fn) + sched_clock_poll(sched_clock_timer.data); } > To solve the problem correctly. you can add init_sched_clock at > "arch/arm/mach-exynos4/mct.c" properly > > Please test the work-around and share the result. I'll try to find the > proper place to add init_sched_clock at mct.c > > Thank you, > Kyungmin Park > > > > > > Thanks. > > > > Best regards, > > Kgene. > > -- > > Kukjin Kim , Senior Engineer, > > SW Solution Development Team, Samsung Electronics Co., Ltd. > > > >> > >> > Thank you, > >> > Kyungmin Park > >> > > >> > On Tue, Jul 26, 2011 at 2:50 PM, Marek Szyprowski > >> > wrote: > >> > > Commit 069d4e743 removed support for local timers and forced to use > > MCT > >> as > >> > > event source. However MCT is not operating properly on early revision > > (EVT0) > >> > > of Exynos4 SoCs. All UniversalC210 boards are based on Exynos4 EVT0, > > so > >> > that > >> > > commit broke support for it. This patch provides a workaround that > > enables > >> > > UniversalC210 boards to boot again. s5p-timer is used as an event > > source. > >> > > > >> > > Signed-off-by: Marek Szyprowski > >> > > Signed-off-by: Kyungmin Park > >> > > --- > >> > > arch/arm/mach-exynos4/Kconfig | 3 +++ > >> > > arch/arm/mach-exynos4/mach-universal_c210.c | 4 +++- > >> > > 2 files changed, 6 insertions(+), 1 deletions(-) > >> > > > >> > > diff --git a/arch/arm/mach-exynos4/Kconfig > > b/arch/arm/mach-exynos4/Kconfig > >> > > index 9d62e13..2aad73f 100644 > >> > > --- a/arch/arm/mach-exynos4/Kconfig > >> > > +++ b/arch/arm/mach-exynos4/Kconfig > >> > > @@ -173,6 +173,9 @@ config MACH_ARMLEX4210 > >> > > config MACH_UNIVERSAL_C210 > >> > > bool "Mobile UNIVERSAL_C210 Board" > >> > > select CPU_EXYNOS4210 > >> > > + select S5P_HRT > >> > > + select CLKSRC_MMIO > >> > > + select HAVE_SCHED_CLOCK > >> > > select S5P_GPIO_INT > >> > > select S5P_DEV_FIMC0 > >> > > select S5P_DEV_FIMC1 > >> > > diff --git a/arch/arm/mach-exynos4/mach-universal_c210.c > > b/arch/arm/mach- > >> > exynos4/mach-universal_c210.c > >> > > index 0e280d1..ca9e7b7 100644 > >> > > --- a/arch/arm/mach-exynos4/mach-universal_c210.c > >> > > +++ b/arch/arm/mach-exynos4/mach-universal_c210.c > >> > > @@ -34,6 +34,7 @@ > >> > > #include > >> > > #include > >> > > #include > >> > > +#include > >> > > > >> > > #include > >> > > > >> > > @@ -730,6 +731,7 @@ static void __init universal_map_io(void) > >> > > s5p_init_io(NULL, 0, S5P_VA_CHIPID); > >> > > s3c24xx_init_clocks(2400); > >> > > s3c24xx_init_uarts(universal_uartcfgs, > > ARRAY_SIZE(universal_uartcfgs)); > >> > > + s5p_set_timer_source(S5P_PWM2, S5P_PWM4); > >> > > } > >> > > > >> > > static void __init universal_reserve(void) > >> > > @@ -766,6 +768,6 @@ MACHINE_START(UNIVERSAL_C210, > >> > "UNIVERSAL_C210") > >> > > .init_irq = exynos4_init_irq, > >> > > .map_io = universal_map_io, > >> > > .init_machine = universal_machine_init, > >> > > - .timer = &exynos4_timer, > >> > > + .timer = &s5p_timer, > >> > > .reserve = &universal_reserve, > >> > > MACHINE_END > >> > > -- > >> > > 1.7.1.569.g6f426 > >> > > > >> > > -- Thanks. Best regards, Kgene. -- Kukjin Kim , Senior Engineer, SW Solution Development Team, Samsung Electronics Co., Ltd. -- To unsubscribe from this list: send the line "unsubscribe linux-samsung-soc" in the body of a message to majord...@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo
Re: [PATCH 2/2] ARM: Exynos4: use s5p-timer for UniversalC210 board
On Thu, Sep 15, 2011 at 3:03 PM, Kukjin Kim wrote: > Kukjin Kim wrote: >> >> Kyungmin Park wrote: >> > >> > Hi, >> > >> > It's required for boot universal c210 w/ EVT0 chip. >> > Can you include it at 3.1 fixed branch? >> > >> Sure, will apply into samsung-fixes for 3.1. > > Unfortunately, it happens boot failure with this patch on other EXYNOS4210 > boards and it is due to HAVE_SCHED_CLOCK. > >> > > + select HAVE_SCHED_CLOCK > > I think, we need to sort out the method... As sched_clock_postinit is called at generic time code by HAVE_SCHED_CLOCK. and there's no sched_clock_update_fn() is defined. As a work-around, you can test it. static void sched_clock_poll(unsigned long wrap_ticks) { mod_timer(&sched_clock_timer, round_jiffies(jiffies + wrap_ticks)); if (sched_clock_update_fn) sched_clock_update_fn(); } To solve the problem correctly. you can add init_sched_clock at "arch/arm/mach-exynos4/mct.c" properly Please test the work-around and share the result. I'll try to find the proper place to add init_sched_clock at mct.c Thank you, Kyungmin Park > > Thanks. > > Best regards, > Kgene. > -- > Kukjin Kim , Senior Engineer, > SW Solution Development Team, Samsung Electronics Co., Ltd. > >> >> > Thank you, >> > Kyungmin Park >> > >> > On Tue, Jul 26, 2011 at 2:50 PM, Marek Szyprowski >> > wrote: >> > > Commit 069d4e743 removed support for local timers and forced to use > MCT >> as >> > > event source. However MCT is not operating properly on early revision > (EVT0) >> > > of Exynos4 SoCs. All UniversalC210 boards are based on Exynos4 EVT0, > so >> > that >> > > commit broke support for it. This patch provides a workaround that > enables >> > > UniversalC210 boards to boot again. s5p-timer is used as an event > source. >> > > >> > > Signed-off-by: Marek Szyprowski >> > > Signed-off-by: Kyungmin Park >> > > --- >> > > arch/arm/mach-exynos4/Kconfig | 3 +++ >> > > arch/arm/mach-exynos4/mach-universal_c210.c | 4 +++- >> > > 2 files changed, 6 insertions(+), 1 deletions(-) >> > > >> > > diff --git a/arch/arm/mach-exynos4/Kconfig > b/arch/arm/mach-exynos4/Kconfig >> > > index 9d62e13..2aad73f 100644 >> > > --- a/arch/arm/mach-exynos4/Kconfig >> > > +++ b/arch/arm/mach-exynos4/Kconfig >> > > @@ -173,6 +173,9 @@ config MACH_ARMLEX4210 >> > > config MACH_UNIVERSAL_C210 >> > > bool "Mobile UNIVERSAL_C210 Board" >> > > select CPU_EXYNOS4210 >> > > + select S5P_HRT >> > > + select CLKSRC_MMIO >> > > + select HAVE_SCHED_CLOCK >> > > select S5P_GPIO_INT >> > > select S5P_DEV_FIMC0 >> > > select S5P_DEV_FIMC1 >> > > diff --git a/arch/arm/mach-exynos4/mach-universal_c210.c > b/arch/arm/mach- >> > exynos4/mach-universal_c210.c >> > > index 0e280d1..ca9e7b7 100644 >> > > --- a/arch/arm/mach-exynos4/mach-universal_c210.c >> > > +++ b/arch/arm/mach-exynos4/mach-universal_c210.c >> > > @@ -34,6 +34,7 @@ >> > > #include >> > > #include >> > > #include >> > > +#include >> > > >> > > #include >> > > >> > > @@ -730,6 +731,7 @@ static void __init universal_map_io(void) >> > > s5p_init_io(NULL, 0, S5P_VA_CHIPID); >> > > s3c24xx_init_clocks(2400); >> > > s3c24xx_init_uarts(universal_uartcfgs, > ARRAY_SIZE(universal_uartcfgs)); >> > > + s5p_set_timer_source(S5P_PWM2, S5P_PWM4); >> > > } >> > > >> > > static void __init universal_reserve(void) >> > > @@ -766,6 +768,6 @@ MACHINE_START(UNIVERSAL_C210, >> > "UNIVERSAL_C210") >> > > .init_irq = exynos4_init_irq, >> > > .map_io = universal_map_io, >> > > .init_machine = universal_machine_init, >> > > - .timer = &exynos4_timer, >> > > + .timer = &s5p_timer, >> > > .reserve = &universal_reserve, >> > > MACHINE_END >> > > -- >> > > 1.7.1.569.g6f426 >> > > >> > > -- >> > > To unsubscribe from this list: send the line "unsubscribe > linux-samsung-soc" in >> > > the body of a message to majord...@vger.kernel.org >> > > More majordomo info at http://vger.kernel.org/majordomo-info.html >> > > > > -- > To unsubscribe from this list: send the line "unsubscribe linux-samsung-soc" > in > the body of a message to majord...@vger.kernel.org > More majordomo info at http://vger.kernel.org/majordomo-info.html > -- To unsubscribe from this list: send the line "unsubscribe linux-samsung-soc" in the body of a message to majord...@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
RE: [PATCH 2/2] ARM: Exynos4: use s5p-timer for UniversalC210 board
Kukjin Kim wrote: > > Kyungmin Park wrote: > > > > Hi, > > > > It's required for boot universal c210 w/ EVT0 chip. > > Can you include it at 3.1 fixed branch? > > > Sure, will apply into samsung-fixes for 3.1. Unfortunately, it happens boot failure with this patch on other EXYNOS4210 boards and it is due to HAVE_SCHED_CLOCK. > > > + select HAVE_SCHED_CLOCK I think, we need to sort out the method... Thanks. Best regards, Kgene. -- Kukjin Kim , Senior Engineer, SW Solution Development Team, Samsung Electronics Co., Ltd. > > > Thank you, > > Kyungmin Park > > > > On Tue, Jul 26, 2011 at 2:50 PM, Marek Szyprowski > > wrote: > > > Commit 069d4e743 removed support for local timers and forced to use MCT > as > > > event source. However MCT is not operating properly on early revision (EVT0) > > > of Exynos4 SoCs. All UniversalC210 boards are based on Exynos4 EVT0, so > > that > > > commit broke support for it. This patch provides a workaround that enables > > > UniversalC210 boards to boot again. s5p-timer is used as an event source. > > > > > > Signed-off-by: Marek Szyprowski > > > Signed-off-by: Kyungmin Park > > > --- > > > arch/arm/mach-exynos4/Kconfig | 3 +++ > > > arch/arm/mach-exynos4/mach-universal_c210.c | 4 +++- > > > 2 files changed, 6 insertions(+), 1 deletions(-) > > > > > > diff --git a/arch/arm/mach-exynos4/Kconfig b/arch/arm/mach-exynos4/Kconfig > > > index 9d62e13..2aad73f 100644 > > > --- a/arch/arm/mach-exynos4/Kconfig > > > +++ b/arch/arm/mach-exynos4/Kconfig > > > @@ -173,6 +173,9 @@ config MACH_ARMLEX4210 > > > config MACH_UNIVERSAL_C210 > > > bool "Mobile UNIVERSAL_C210 Board" > > > select CPU_EXYNOS4210 > > > + select S5P_HRT > > > + select CLKSRC_MMIO > > > + select HAVE_SCHED_CLOCK > > > select S5P_GPIO_INT > > > select S5P_DEV_FIMC0 > > > select S5P_DEV_FIMC1 > > > diff --git a/arch/arm/mach-exynos4/mach-universal_c210.c b/arch/arm/mach- > > exynos4/mach-universal_c210.c > > > index 0e280d1..ca9e7b7 100644 > > > --- a/arch/arm/mach-exynos4/mach-universal_c210.c > > > +++ b/arch/arm/mach-exynos4/mach-universal_c210.c > > > @@ -34,6 +34,7 @@ > > > #include > > > #include > > > #include > > > +#include > > > > > > #include > > > > > > @@ -730,6 +731,7 @@ static void __init universal_map_io(void) > > > s5p_init_io(NULL, 0, S5P_VA_CHIPID); > > > s3c24xx_init_clocks(2400); > > > s3c24xx_init_uarts(universal_uartcfgs, ARRAY_SIZE(universal_uartcfgs)); > > > + s5p_set_timer_source(S5P_PWM2, S5P_PWM4); > > > } > > > > > > static void __init universal_reserve(void) > > > @@ -766,6 +768,6 @@ MACHINE_START(UNIVERSAL_C210, > > "UNIVERSAL_C210") > > > .init_irq = exynos4_init_irq, > > > .map_io = universal_map_io, > > > .init_machine = universal_machine_init, > > > - .timer = &exynos4_timer, > > > + .timer = &s5p_timer, > > > .reserve = &universal_reserve, > > > MACHINE_END > > > -- > > > 1.7.1.569.g6f426 > > > > > > -- > > > To unsubscribe from this list: send the line "unsubscribe linux-samsung-soc" in > > > the body of a message to majord...@vger.kernel.org > > > More majordomo info at http://vger.kernel.org/majordomo-info.html > > > -- To unsubscribe from this list: send the line "unsubscribe linux-samsung-soc" in the body of a message to majord...@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
RE: [PATCH 2/2] ARM: Exynos4: use s5p-timer for UniversalC210 board
Kyungmin Park wrote: > > Hi, > > It's required for boot universal c210 w/ EVT0 chip. > Can you include it at 3.1 fixed branch? > Sure, will apply into samsung-fixes for 3.1. Thanks. Best regards, Kgene. -- Kukjin Kim , Senior Engineer, SW Solution Development Team, Samsung Electronics Co., Ltd. > Thank you, > Kyungmin Park > > On Tue, Jul 26, 2011 at 2:50 PM, Marek Szyprowski > wrote: > > Commit 069d4e743 removed support for local timers and forced to use MCT as > > event source. However MCT is not operating properly on early revision (EVT0) > > of Exynos4 SoCs. All UniversalC210 boards are based on Exynos4 EVT0, so > that > > commit broke support for it. This patch provides a workaround that enables > > UniversalC210 boards to boot again. s5p-timer is used as an event source. > > > > Signed-off-by: Marek Szyprowski > > Signed-off-by: Kyungmin Park > > --- > > arch/arm/mach-exynos4/Kconfig | 3 +++ > > arch/arm/mach-exynos4/mach-universal_c210.c | 4 +++- > > 2 files changed, 6 insertions(+), 1 deletions(-) > > > > diff --git a/arch/arm/mach-exynos4/Kconfig b/arch/arm/mach-exynos4/Kconfig > > index 9d62e13..2aad73f 100644 > > --- a/arch/arm/mach-exynos4/Kconfig > > +++ b/arch/arm/mach-exynos4/Kconfig > > @@ -173,6 +173,9 @@ config MACH_ARMLEX4210 > > config MACH_UNIVERSAL_C210 > > bool "Mobile UNIVERSAL_C210 Board" > > select CPU_EXYNOS4210 > > + select S5P_HRT > > + select CLKSRC_MMIO > > + select HAVE_SCHED_CLOCK > > select S5P_GPIO_INT > > select S5P_DEV_FIMC0 > > select S5P_DEV_FIMC1 > > diff --git a/arch/arm/mach-exynos4/mach-universal_c210.c b/arch/arm/mach- > exynos4/mach-universal_c210.c > > index 0e280d1..ca9e7b7 100644 > > --- a/arch/arm/mach-exynos4/mach-universal_c210.c > > +++ b/arch/arm/mach-exynos4/mach-universal_c210.c > > @@ -34,6 +34,7 @@ > > #include > > #include > > #include > > +#include > > > > #include > > > > @@ -730,6 +731,7 @@ static void __init universal_map_io(void) > > s5p_init_io(NULL, 0, S5P_VA_CHIPID); > > s3c24xx_init_clocks(2400); > > s3c24xx_init_uarts(universal_uartcfgs, ARRAY_SIZE(universal_uartcfgs)); > > + s5p_set_timer_source(S5P_PWM2, S5P_PWM4); > > } > > > > static void __init universal_reserve(void) > > @@ -766,6 +768,6 @@ MACHINE_START(UNIVERSAL_C210, > "UNIVERSAL_C210") > > .init_irq = exynos4_init_irq, > > .map_io = universal_map_io, > > .init_machine = universal_machine_init, > > - .timer = &exynos4_timer, > > + .timer = &s5p_timer, > > .reserve = &universal_reserve, > > MACHINE_END > > -- > > 1.7.1.569.g6f426 > > > > -- > > To unsubscribe from this list: send the line "unsubscribe linux-samsung-soc" in > > the body of a message to majord...@vger.kernel.org > > More majordomo info at http://vger.kernel.org/majordomo-info.html > > -- To unsubscribe from this list: send the line "unsubscribe linux-samsung-soc" in the body of a message to majord...@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
Re: [PATCH 2/2] ARM: Exynos4: use s5p-timer for UniversalC210 board
Hi, It's required for boot universal c210 w/ EVT0 chip. Can you include it at 3.1 fixed branch? Thank you, Kyungmin Park On Tue, Jul 26, 2011 at 2:50 PM, Marek Szyprowski wrote: > Commit 069d4e743 removed support for local timers and forced to use MCT as > event source. However MCT is not operating properly on early revision (EVT0) > of Exynos4 SoCs. All UniversalC210 boards are based on Exynos4 EVT0, so that > commit broke support for it. This patch provides a workaround that enables > UniversalC210 boards to boot again. s5p-timer is used as an event source. > > Signed-off-by: Marek Szyprowski > Signed-off-by: Kyungmin Park > --- > arch/arm/mach-exynos4/Kconfig | 3 +++ > arch/arm/mach-exynos4/mach-universal_c210.c | 4 +++- > 2 files changed, 6 insertions(+), 1 deletions(-) > > diff --git a/arch/arm/mach-exynos4/Kconfig b/arch/arm/mach-exynos4/Kconfig > index 9d62e13..2aad73f 100644 > --- a/arch/arm/mach-exynos4/Kconfig > +++ b/arch/arm/mach-exynos4/Kconfig > @@ -173,6 +173,9 @@ config MACH_ARMLEX4210 > config MACH_UNIVERSAL_C210 > bool "Mobile UNIVERSAL_C210 Board" > select CPU_EXYNOS4210 > + select S5P_HRT > + select CLKSRC_MMIO > + select HAVE_SCHED_CLOCK > select S5P_GPIO_INT > select S5P_DEV_FIMC0 > select S5P_DEV_FIMC1 > diff --git a/arch/arm/mach-exynos4/mach-universal_c210.c > b/arch/arm/mach-exynos4/mach-universal_c210.c > index 0e280d1..ca9e7b7 100644 > --- a/arch/arm/mach-exynos4/mach-universal_c210.c > +++ b/arch/arm/mach-exynos4/mach-universal_c210.c > @@ -34,6 +34,7 @@ > #include > #include > #include > +#include > > #include > > @@ -730,6 +731,7 @@ static void __init universal_map_io(void) > s5p_init_io(NULL, 0, S5P_VA_CHIPID); > s3c24xx_init_clocks(2400); > s3c24xx_init_uarts(universal_uartcfgs, ARRAY_SIZE(universal_uartcfgs)); > + s5p_set_timer_source(S5P_PWM2, S5P_PWM4); > } > > static void __init universal_reserve(void) > @@ -766,6 +768,6 @@ MACHINE_START(UNIVERSAL_C210, "UNIVERSAL_C210") > .init_irq = exynos4_init_irq, > .map_io = universal_map_io, > .init_machine = universal_machine_init, > - .timer = &exynos4_timer, > + .timer = &s5p_timer, > .reserve = &universal_reserve, > MACHINE_END > -- > 1.7.1.569.g6f426 > > -- > To unsubscribe from this list: send the line "unsubscribe linux-samsung-soc" > in > the body of a message to majord...@vger.kernel.org > More majordomo info at http://vger.kernel.org/majordomo-info.html > -- To unsubscribe from this list: send the line "unsubscribe linux-samsung-soc" in the body of a message to majord...@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html