I found the problem it was a merging error when I rebased my patch for
my RS485 addition to the UART driver.
I am however still having issues with the frame buffer displaying
horizontal doted lines that shift the next pixels down by a number of
pixels when certain colors are displayed.
Thanks,
Thomas Abraham wrote:
Hi Paul,
On 10 November 2011 21:27, Paul Schilling paul.s.schill...@gmail.com
wrote:
Here is my boot log including some u-boot stuff. The trace in my boot
log is concerning a
still broken GPIO bank M access that appears broken.
Thanks for the log. But I could
Here is my boot log including some u-boot stuff. The trace in my boot
log is concerning a
still broken GPIO bank M access that appears broken.
Thanks,
Paul Schilling
dm9000 i/o: 0x2300, id: 0x9a46
DM9000: running in 16 bit mode
MAC: 12:23:34:88:99:00
BOOTP broadcast 1
BOOTP
Hi Paul,
On 10 November 2011 21:27, Paul Schilling paul.s.schill...@gmail.com wrote:
Here is my boot log including some u-boot stuff. The trace in my boot
log is concerning a
still broken GPIO bank M access that appears broken.
Thanks for the log. But I could find out the cause of this
On 10 November 2011 05:00, Paul Schilling paul.s.schill...@gmail.com wrote:
Boot past init slow - stalled when using jffs2 also.
On Wed, Nov 9, 2011 at 4:12 PM, Paul Schilling
paul.s.schill...@gmail.com wrote:
Latest kernel 3.2.0-rc1 appears to break the following processors
s3c2440 and
Hi Paul,
Am Donnerstag, 10. November 2011, 01:14:59 schrieb Thomas Abraham:
On 10 November 2011 05:00, Paul Schilling paul.s.schill...@gmail.com
wrote:
Boot past init slow - stalled when using jffs2 also.
On Wed, Nov 9, 2011 at 4:12 PM, Paul Schilling
paul.s.schill...@gmail.com