On 9 May 2012 01:46, Andrew Morton a...@linux-foundation.org wrote:
On Tue, 8 May 2012 21:48:14 +0530
Amit Daniel Kachhap amit.kach...@linaro.org wrote:
This patch adds support for generic cpu thermal cooling low level
implementations using frequency scaling up/down based on the registration
On 9 May 2012 01:46, Andrew Morton a...@linux-foundation.org wrote:
On Tue, 8 May 2012 21:48:17 +0530
Amit Daniel Kachhap amit.kach...@linaro.org wrote:
This code added creates a link between temperature sensors, linux thermal
framework and cooling devices for samsung exynos platform. This
On 9 May 2012 01:36, Zhang, Rui rui.zh...@intel.com wrote:
Hi, Amit,
Sorry for the late response as I'm in a travel recently.
I think the generic cpufreq cooling patches are good.
But about the THERMAL_TRIP_STATE_INSTANCE patch, what I'd like to see is that
1. from thermal zone point of
Hi Rob/Eduardo,
As these patches have still not made into mainline. I will rebase the
whole set along with your suggestion and send them shortly.
Sorry for late reply.
Thanks,
Amit Daniel
On Tue, Jun 26, 2012 at 1:12 PM, Valentin, Eduardo
eduardo.valen...@ti.com wrote:
Hey Rob and Amit,
On
On Tue, Jul 10, 2012 at 12:31 PM, Hongbo Zhang hongbo.zh...@linaro.org wrote:
On 12 May 2012 17:40, Amit Daniel Kachhap amit.kach...@linaro.org wrote:
This patch adds support for generic cpu thermal cooling low level
implementations using frequency scaling up/down based on the registration
On Thu, Jul 12, 2012 at 8:40 PM, Valentin, Eduardo
eduardo.valen...@ti.com wrote:
Amit,
On Thu, Jul 12, 2012 at 4:41 PM, Amit Daniel Kachhap
amit.kach...@linaro.org wrote:
This patchset introduces a new generic cooling device based on cpufreq
that can be used on non-ACPI platforms. As a
On Fri, Jul 13, 2012 at 4:34 AM, Andrew Morton
a...@linux-foundation.org wrote:
On Thu, 12 Jul 2012 19:11:04 +0530
Amit Daniel Kachhap amit.kach...@linaro.org wrote:
[a...@linux-foundation.org: fix comment layout]
Signed-off-by: Amit Daniel Kachhap amit.kach...@linaro.org
Cc: Donggeun Kim
On Fri, Jul 13, 2012 at 3:39 PM, Hongbo Zhang hongbo.zh...@linaro.org wrote:
On 12 May 2012 17:40, Amit Daniel Kachhap amit.kach...@linaro.org wrote:
This patch adds support for generic cpu thermal cooling low level
implementations using frequency scaling up/down based on the registration
On Fri, Jul 13, 2012 at 4:58 PM, Kukjin Kim kgene@samsung.com wrote:
Amit Daniel Kachhap wrote:
These TMU enablement patches are needed for exynos4 and exynos5 TMU
driver patches sent earlier. The link for those are
http://www.spinics.net/lists/lm-sensors/msg35858.html.
How was going on
On Fri, Jul 13, 2012 at 8:11 PM, Guenter Roeck li...@roeck-us.net wrote:
On Fri, Jul 13, 2012 at 08:28:18PM +0900, Kukjin Kim wrote:
Amit Daniel Kachhap wrote:
These TMU enablement patches are needed for exynos4 and exynos5 TMU
driver patches sent earlier. The link for those are
On 16 August 2012 20:22, Valentin, Eduardo eduardo.valen...@ti.com wrote:
Amit,
Thanks again for keeping this up.
On Thu, Aug 16, 2012 at 2:41 PM, Amit Daniel Kachhap
amit.kach...@linaro.org wrote:
This patchset introduces a new generic cooling device based on cpufreq
that can be used
On 17 August 2012 12:54, Zhang Rui rui.zh...@intel.com wrote:
On 四, 2012-08-16 at 17:11 +0530, Amit Daniel Kachhap wrote:
This patchset introduces a new generic cooling device based on cpufreq
that can be used on non-ACPI platforms. As a proof of concept, we have
drivers for the following
This is repost containing the changes suggested by Zhang Rui. Now the
cpufreq current state will be calculated each time instead of earlier
way of returning the cached value.
Thanks,
Amit Daniel
On 17 August 2012 18:59, Amit Daniel Kachhap amit.kach...@linaro.org wrote:
This patchset introduces
On Mon, Sep 10, 2012 at 3:25 PM, Zhang Rui rui.zh...@intel.com wrote:
Refreshed to remove the notifier mechanism as we do not have a real user of
it.
if there is no problem, I'll apply the whole patch set to thermal next tree.
The removal of notification API looks fine. Thanks for refreshing
On 8 November 2012 11:31, Zhang Rui rui.zh...@intel.com wrote:
On Thu, 2012-11-08 at 09:56 +0530, Amit Daniel Kachhap wrote:
This modification adds 2 new thermal trend type THERMAL_TREND_RAISE_FULL
and THERMAL_TREND_DROP_FULL. This thermal trend can be used to quickly
jump to the upper or
On 9 November 2012 09:21, Zhang Rui rui.zh...@intel.com wrote:
On Thu, 2012-11-08 at 11:56 +0530, Amit Kachhap wrote:
On 8 November 2012 11:31, Zhang Rui rui.zh...@intel.com wrote:
On Thu, 2012-11-08 at 09:56 +0530, Amit Daniel Kachhap wrote:
This modification adds 2 new thermal trend type
On 15 November 2012 12:09, Sachin Kamat sachin.ka...@linaro.org wrote:
CPU_FREQ_TABLE depends on CPU_FREQ. Selecting CPU_FREQ_TABLE without checking
for dependencies gives the following compilation warnings:
warning: (ARCH_TEGRA_2x_SOC ARCH_TEGRA_3x_SOC UX500_SOC_DB8500
CPU_THERMAL
On 15 November 2012 12:34, Zhang Rui rui.zh...@intel.com wrote:
On Thu, 2012-11-15 at 12:31 +0530, Amit Kachhap wrote:
On 15 November 2012 12:09, Sachin Kamat sachin.ka...@linaro.org wrote:
CPU_FREQ_TABLE depends on CPU_FREQ. Selecting CPU_FREQ_TABLE without
checking
for dependencies
On 22 November 2012 06:52, Zhang Rui rui.zh...@intel.com wrote:
On Thu, 2012-11-08 at 09:56 +0530, Amit Daniel Kachhap wrote:
This modification adds 2 new thermal trend type THERMAL_TREND_RAISE_FULL
and THERMAL_TREND_DROP_FULL. This thermal trend can be used to quickly
jump to the upper or
On 22 November 2012 13:42, Zhang Rui rui.zh...@intel.com wrote:
On Thu, 2012-11-22 at 10:11 +0530, Amit Kachhap wrote:
On 22 November 2012 06:52, Zhang Rui rui.zh...@intel.com wrote:
On Thu, 2012-11-08 at 09:56 +0530, Amit Daniel Kachhap wrote:
This modification adds 2 new thermal trend type
Hi Joe,
Thanks for the review. Will re-post with your suggestion,
On Sun, Jan 6, 2013 at 3:55 PM, Joe Perches j...@perches.com wrote:
On Sun, 2013-01-06 at 15:50 -0800, Amit Daniel Kachhap wrote:
Below fixes are done to support falling threshold interrupt,
* Falling interrupt status macro
On Tue, Jan 8, 2013 at 2:50 AM, Inderpal Singh
inderpal.si...@linaro.org wrote:
Add freq_attr attribute to show list of available frequencies.
Signed-off-by: Donggeun Kim dg77@samsung.com
Signed-off-by: MyungJoo Ham myungjoo@samsung.com
Signed-off-by: KyungMin Park
Hi Rui,
Thanks for the review comments,
On Tue, Jan 15, 2013 at 11:33 PM, Zhang Rui rui.zh...@intel.com wrote:
Hi, Amit,
On Sun, 2013-01-06 at 16:08 -0800, Amit Daniel Kachhap wrote:
This patch adds support to set the emulated temperature method in
thermal zone (sensor). After setting this
On Mon, Jan 21, 2013 at 7:20 PM, Zhang Rui rui.zh...@intel.com wrote:
On Wed, 2013-01-16 at 11:30 -0800, amit kachhap wrote:
Hi Rui,
Thanks for the review comments,
On Tue, Jan 15, 2013 at 11:33 PM, Zhang Rui rui.zh...@intel.com wrote:
Hi, Amit,
On Sun, 2013-01-06 at 16:08 -0800, Amit
On Fri, Feb 1, 2013 at 12:27 AM, Zhang Rui rui.zh...@intel.com wrote:
On Sun, 2013-01-27 at 19:28 -0800, Amit Daniel Kachhap wrote:
This patch adds support to set the emulated temperature method in
thermal zone (sensor). After setting this feature thermal zone may
report this temperature and
On Wed, Feb 6, 2013 at 8:49 PM, Inderpal Singh
inderpal.si...@linaro.org wrote:
On 7 February 2013 01:09, Amit Daniel Kachhap amit.dan...@samsung.com wrote:
Add cpufreq controller device node for Exynos5440 SoC for passing
parameters like controller base address, interrupt and cpufreq
table.
Hi Viresh,
Thanks for the detailed review. Will try to handle them in the next version,
On Thu, Feb 7, 2013 at 3:17 AM, Viresh Kumar viresh.ku...@linaro.org wrote:
On Thu, Feb 7, 2013 at 1:09 AM, Amit Daniel Kachhap
amit.dan...@samsung.com wrote:
This patch adds dvfs support for exynos5440
Hi Rui,
Please merge this patch also. The 1st series of this patchset is
already accepted by you. This is just a adaptation of the earlier one
and does code cleanup.
Thanks,
Amit Daniel
On Sun, Feb 3, 2013 at 6:14 PM, Zhang Rui rui.zh...@intel.com wrote:
On Sun, 2013-01-27 at 19:28 -0800, Amit
On Thu, Feb 7, 2013 at 6:42 PM, Viresh Kumar viresh.ku...@linaro.org wrote:
On 8 February 2013 00:38, amit kachhap amit.kach...@gmail.com wrote:
Hi Viresh,
Thanks for the detailed review. Will try to handle them in the next version,
np. I haven't seen reply to few questions, you missed them
On Thu, Feb 7, 2013 at 7:04 PM, Zhang Rui rui.zh...@intel.com wrote:
On Mon, 2013-02-04 at 10:14 +0800, Zhang Rui wrote:
On Sun, 2013-01-27 at 19:28 -0800, Amit Daniel Kachhap wrote:
This removes the driver specific sysfs support of the temperature
emulation and uses the newly added core
On Fri, Feb 8, 2013 at 8:49 AM, Inderpal Singh
inderpal.si...@linaro.org wrote:
On 8 February 2013 00:03, amit kachhap amit.kach...@gmail.com wrote:
On Wed, Feb 6, 2013 at 8:49 PM, Inderpal Singh
inderpal.si...@linaro.org wrote:
On 7 February 2013 01:09, Amit Daniel Kachhap amit.dan
Hi Viresh,
Again thanks for your review comments.
On Tue, Mar 5, 2013 at 6:48 AM, Viresh Kumar viresh.ku...@linaro.org wrote:
On 2 March 2013 15:04, Amit Daniel Kachhap amit.dan...@samsung.com wrote:
This patch adds dvfs support for exynos5440 SOC. This soc has 4 cores and
they run at same
Hi Sylwester,
Thanks for the review. Will update with your suggestion in the next version,
Thanks,
Amit D
On Thu, Mar 7, 2013 at 8:58 PM, Sylwester Nawrocki
s.nawro...@samsung.com wrote:
On 03/07/2013 05:13 AM, Amit Daniel Kachhap wrote:
+/* Register definations */
s/definations/definitions
Hi Russell,
On Thu, Mar 7, 2013 at 9:07 PM, Russell King - ARM Linux
li...@arm.linux.org.uk wrote:
On Thu, Mar 07, 2013 at 04:28:00PM +0100, Sylwester Nawrocki wrote:
On 03/07/2013 05:13 AM, Amit Daniel Kachhap wrote:
+ dvfs_info-cpu_clk = devm_clk_get(dvfs_info-dev, armclk);
+ if
Hi Viresh,
On Sat, Mar 9, 2013 at 4:17 PM, Viresh Kumar viresh.ku...@linaro.org wrote:
On 7 March 2013 12:13, Amit Daniel Kachhap amit.dan...@samsung.com wrote:
diff --git a/drivers/cpufreq/exynos5440-cpufreq.c
b/drivers/cpufreq/exynos5440-cpufreq.c
+struct exynos_dvfs_data {
+ void
Hi Viresh,
On Tue, Mar 12, 2013 at 4:19 PM, Viresh Kumar viresh.ku...@linaro.org wrote:
This is what Russell told me a long time back:
Don't use Adding, Fixing, etc words as this work is not something, which is
already done.
So your subject should have been: cpufreq: exynos: Add cpufreq
Hi Eduardo,
Thanks for your review comments.
On Fri, Apr 12, 2013 at 1:03 AM, Eduardo Valentin
eduardo.valen...@ti.com wrote:
Hello Amit,
Couple of comments inline.
On 26-03-2013 07:33, Amit Daniel Kachhap wrote:
This removes the driver specific sysfs support of the temperature
Hi Eduardo,
On Fri, Apr 12, 2013 at 1:39 AM, Eduardo Valentin
eduardo.valen...@ti.com wrote:
Hey Amit,
On 26-03-2013 07:33, Amit Daniel Kachhap wrote:
This code modifies the thermal driver to have multiple thermal zone
support by replacing the global thermal zone varibale with device data
Hi,
I have one suggestion,
On Fri, Apr 19, 2013 at 10:08 PM, Lukasz Majewski
l.majew...@samsung.com wrote:
Enable TMU support for Exynos4412 based target with device tree.
Signed-off-by: Lukasz Majewski l.majew...@samsung.com
Signed-off-by: Kyungmin Park kyungmin.p...@samsung.com
---
Hi Bartlomiej,
On 5/5/14, Bartlomiej Zolnierkiewicz b.zolnier...@samsung.com wrote:
There should be no functional changes caused by this patch.
Signed-off-by: Bartlomiej Zolnierkiewicz b.zolnier...@samsung.com
---
drivers/thermal/samsung/exynos_tmu.h | 40
Hi Bartlomiej,
On 5/5/14, Bartlomiej Zolnierkiewicz b.zolnier...@samsung.com wrote:
There should be no functional changes caused by this patch.
Signed-off-by: Bartlomiej Zolnierkiewicz b.zolnier...@samsung.com
---
drivers/thermal/samsung/exynos_tmu_data.h | 27 +--
Hi Bartlomiej,
On 5/5/14, Bartlomiej Zolnierkiewicz b.zolnier...@samsung.com wrote:
There should be no functional changes caused by this patch.
Signed-off-by: Bartlomiej Zolnierkiewicz b.zolnier...@samsung.com
---
drivers/thermal/samsung/exynos_tmu.c | 33
On 5/5/14, Bartlomiej Zolnierkiewicz b.zolnier...@samsung.com wrote:
Only TYPE_ONE_POINT_TRIMMING calibration is used so remove
the dead code for TYPE_TWO_POINT_TRIMMING calibration.
I prefer to retain this feature as it is provided by the TMU
controller. This will avoid unnecessary churning of
On 5/15/14, Bartlomiej Zolnierkiewicz b.zolnier...@samsung.com wrote:
On Thursday, May 15, 2014 10:47:40 AM Eduardo Valentin wrote:
Hello Bartlomiej,
Hi,
On Mon, May 05, 2014 at 01:15:34PM +0200, Bartlomiej Zolnierkiewicz
wrote:
Remove runtime checks for pdata sanity from
On 5/5/14, Bartlomiej Zolnierkiewicz b.zolnier...@samsung.com wrote:
Remove runtime checks for negative return values of temp_to_code()
from exynos_tmu_initialize(). The current level temperature data
hardcoded in pdata will never cause a negative temp_to_code()
return values and for the new
On 5/5/14, Bartlomiej Zolnierkiewicz b.zolnier...@samsung.com wrote:
* Remove dead temp check from temp_to_code() (this function users
in exynos_tmu_initialize() always pass correct temperatures and
exynos_tmu_set_emulation() returns early for EXYNOS4210 because
TMU_SUPPORT_EMULATION
On 5/5/14, Bartlomiej Zolnierkiewicz b.zolnier...@samsung.com wrote:
Cache number of non-hardware trigger levels in a new pdata field
(non_hw_trigger_levels) and convert code in exynos_tmu_initialize()
accordingly.
Changes looks fine,
Reviewed-by: Amit Daniel Kachhapamit.dan...@samsung.com
Hi Bartlomiej,
On 5/5/14, Bartlomiej Zolnierkiewicz b.zolnier...@samsung.com wrote:
pdata-reference_voltage and pdata-gain are always defined
to non-zero values so remove the redundant checks from
exynos_tmu_control().
I prefer to have these checks for the same reason that new soc support
On 5/5/14, Bartlomiej Zolnierkiewicz b.zolnier...@samsung.com wrote:
There is no need for abstracting configuration for registers that
are identical on all SoC types.
Changes look fine and also that shift and masks may not change in
future socs also.
Reviewed-by: Amit Daniel
On 5/15/14, Zhang Rui rui.zh...@intel.com wrote:
On 一, 2014-05-05 at 13:15 +0200, Bartlomiej Zolnierkiewicz wrote:
Hi,
This patch series contains various cleanups for EXYNOS thermal
driver. Overall it decreases driver's LOC by 13%. It is based
on next-20140428 kernel. It should not cause
From: Amit Daniel Kachhap amit.kach...@linaro.org
This Patch series adds support for AFTR mode cpuidle state based on
patch (http://www.spinics.net/lists/arm-kernel/msg132243.html) earlier
submitted by Jaecheol Lee jc@samsung.com.
This patch uses CPU PM notifiers , common l2 save/restore
From: Amit Daniel Kachhap amit.kach...@linaro.org
This patch adds support for AFTR(ARM OFF TOP RUNNING) mode in
cpuidle driver for EXYNOS4210. L2 cache keeps their data in this mode.
This patch ports the code to the latest interfaces to
save/restore CPU state inclusive of CPU PM notifiers, l2
From: Lorenzo Pieralisi lorenzo.pieral...@arm.com
This patch cleans up sleep code in preparation for L2 resume code
and hotplug functions
Signed-off-by: Lorenzo Pieralisi lorenzo.pieral...@arm.com
---
arch/arm/mach-exynos4/sleep.S |3 +--
1 files changed, 1 insertions(+), 2 deletions(-)
From: Amit Daniel Kachhap amit.kach...@linaro.org
This patch adds code to save L2 register configuration at boot, and to
resume L2 before MMU is enabled in suspend and cpuidle resume paths.
Signed-off-by: Lorenzo Pieralisi lorenzo.pieral...@arm.com
Signed-off-by: Amit Daniel Kachhap
From: Amit Daniel Kachhap amit.kach...@linaro.org
Following the merge of CPU PM notifiers and L2 resume code, this patch
removes useless code to save and restore L2 and GIC registers.
This is now automatically covered by suspend calls which integrated
CPU PM notifiers and new sleep code that
On 11 November 2011 15:47, Lorenzo Pieralisi lorenzo.pieral...@arm.com wrote:
Hi Amit,
On Fri, Nov 11, 2011 at 06:29:33AM +, Amit Daniel Kachhap wrote:
This patch adds support for AFTR(ARM OFF TOP RUNNING) mode in
cpuidle driver for EXYNOS4210. L2 cache keeps their data in this mode.
On 11 November 2011 13:03, MyungJoo Ham myungjoo@gmail.com wrote:
On Sat, Nov 5, 2011 at 2:03 AM, amit.kach...@linaro.org wrote:
From: Amit Daniel Kachhap amit.kach...@linaro.org
This patch adds support for AFTR(ARM OFF TOP RUNNING) mode in
cpuidle driver for EXYNOS4210. L2 cache keeps
On Tue, Nov 22, 2011 at 3:19 PM, Russell King - ARM Linux
li...@arm.linux.org.uk wrote:
On Tue, Nov 22, 2011 at 03:05:29PM +0530, Amit Daniel Kachhap wrote:
This patch adds code to save L2 register configuration at boot, and
later used to resume L2 before MMU is enabled in suspend and cpuidle
On Tue, Nov 22, 2011 at 3:18 PM, Russell King - ARM Linux
li...@arm.linux.org.uk wrote:
On Tue, Nov 22, 2011 at 03:05:28PM +0530, Amit Daniel Kachhap wrote:
This patch cleans up sleep code in preparation for L2 resume code
and hotplug functions
I wonder whether anyone read the comments in
On Thu, Nov 24, 2011 at 9:37 AM, Inderpal Singh
inderpal.si...@linaro.org wrote:
Hi Amit,
On 22 November 2011 15:05, Amit Daniel Kachhap amit.kach...@linaro.org
wrote:
This patch adds support AFTR(ARM OFF TOP RUNNING) mode in
cpuidle driver. L2 cache keeps their data in this mode.
This
Dear Kukjin Kim,
Any comments or feedback on this patchset from your side. I am
preparing another version with fixes/issues suggested by Russell
and Inder.
Thanks,
Amit Daniel
On Tue, Nov 22, 2011 at 3:05 PM, Amit Daniel Kachhap
amit.kach...@linaro.org wrote:
Changes since V2:
*Implemented
On Thu, Dec 1, 2011 at 4:05 PM, Kukjin Kim kgene@samsung.com wrote:
Amit Daniel Kachhap wrote:
This patch adds remove_irq in place of disable_irq which is
correct equivalent function for setup_irq used in
exynos4_mct_tick_init.
Signed-off-by: Amit Daniel Kachhap amit.kach...@linaro.org
Hi Guenter,
The main idea of this work is to leave the current userspace based
notification scheme and add the kernel based cooling scheme on top of
it. Anyway, It is a good idea to move the file hwmon/exynos4_tmu.c as
this creates 2 hwmon entries.
Adding CC: Donggeun Kim to know his opinion.
On 3 January 2012 18:52, Kukjin Kim kgene@samsung.com wrote:
amit kachhap wrote:
Hi Mr kim,
All the comments have been addressed for the Exynos cpu idle patchset.
The updated patchset was posted about one month back and there have
been no further comments on the patchset since
On 5 January 2012 10:06, Olof Johansson o...@lixom.net wrote:
On Wed, Jan 4, 2012 at 8:25 PM, Amit Daniel Kachhap
amit.kach...@linaro.org wrote:
This patch enables calling generic l2 setup functions if device tree is used.
Signed-off-by: Amit Daniel Kachhap amit.kach...@linaro.org
---
On 23 February 2012 11:54, Rob Lee rob@linaro.org wrote:
static struct cpuidle_state exynos4_cpuidle_set[] = {
[0] = {
@@ -27,9 +47,17 @@ static struct cpuidle_state exynos4_cpuidle_set[] = {
.exit_latency = 1,
.target_residency =
On 3 March 2012 17:51, Sylwester Nawrocki snj...@gmail.com wrote:
On 03/03/2012 12:06 PM, Amit Daniel Kachhap wrote:
This movement is needed because the hwmon entries and corresponding
sysfs interface is a duplicate of utilities already provided by
driver/thermal/thermal_sys.c. The goal is to
On 3 March 2012 23:34, Guenter Roeck guenter.ro...@ericsson.com wrote:
On Sat, Mar 03, 2012 at 11:44:10AM -0500, Mark Brown wrote:
On Sat, Mar 03, 2012 at 04:36:05PM +0530, Amit Daniel Kachhap wrote:
This movement is needed because the hwmon entries and corresponding
sysfs interface is a
Hi Durgadoss,
Thanks for the detailed review.
On 12 March 2012 16:21, R, Durgadoss durgados...@intel.com wrote:
Hi Amit,
Thanks for keeping this up. And Sorry for late reply.
-Original Message-
From: amit kachhap [mailto:amitdani...@gmail.com] On Behalf Of Amit Daniel
Kachhap
On 19 March 2012 17:15, Srivatsa S. Bhat
srivatsa.b...@linux.vnet.ibm.com wrote:
On 03/19/2012 11:47 AM, Amit Daniel Kachhap wrote:
This patch adds support for generic cpu thermal cooling low level
implementations using cpuhotplug based on the thermal level requested
from user. Different cpu
Hi Len/Rui,
Any comment or feedback from your side about the status of this patch?
Is it merge-able or major re-work is needed? I have fixed most of the
comments in this patchset and currently working on some of the minor
comments received and will submit them shortly.
Regards,
Amit Daniel
On
On 16 April 2012 07:37, Zhang Rui rui.zh...@intel.com wrote:
On 三, 2012-04-11 at 18:17 +0530, Amit Kachhap wrote:
Hi Rui,
Thanks for looking into the patches.
On 10 April 2012 06:28, Zhang Rui rui.zh...@intel.com wrote:
Hi, Amit,
On 三, 2012-04-04 at 10:02 +0530, Amit Kachhap wrote
Hi Mr Kukjin,
Any comment or update about this patch?
Regards,
Amit Daniel
On Mon, Apr 30, 2012 at 10:13 PM, Rob Lee rob@linaro.org wrote:
On Wed, Apr 25, 2012 at 9:44 AM, Daniel Lezcano
daniel.lezc...@linaro.org wrote:
On 04/25/2012 02:11 PM, Amit Daniel Kachhap wrote:
This patch
Hi Bartlomeij,
Yes these patches have missed 2 merge windows and still not merged.
Mike:
I am re-basing these patches on linux-next. Please merge them.
Regards,
Amit
On Wed, Oct 9, 2013 at 3:18 PM, Bartlomiej Zolnierkiewicz
b.zolnier...@samsung.com wrote:
Hi,
Mike:
Could you please apply
On 10/4/13, Bartlomiej Zolnierkiewicz b.zolnier...@samsung.com wrote:
Menu for Samsung thermal support is visible on all Samsung
platforms while thermal drivers are currently available only
for EXYNOS SoCs. Fix it by replacing PLAT_SAMSUNG dependency
with ARCH_EXYNOS one.
Signed-off-by:
On 11/25/13, Bartlomiej Zolnierkiewicz b.zolnier...@samsung.com wrote:
Hi,
Could you please also apply this patch?
Best regards,
--
Bartlomiej Zolnierkiewicz
Samsung RD Institute Poland
Samsung Electronics
On Friday, October 04, 2013 02:38:25 PM Bartlomiej Zolnierkiewicz wrote:
There
On Mon, Mar 28, 2011 at 4:41 AM, Ben Dooks ben-li...@fluff.org wrote:
On Sun, Mar 27, 2011 at 04:32:43PM -0400, Amit Daniel Kachhap wrote:
This patch adds PM runtime management support in the I2C driver.
The functionality of the driver is not modified much but some extra I2C
states are added
On 21 August 2011 22:48, Russell King - ARM Linux
li...@arm.linux.org.uk wrote:
On Fri, Aug 19, 2011 at 06:39:59PM +0530, Amit Daniel Kachhap wrote:
+ENTRY(exynos4_enter_lp)
+ stmfd sp!, { r3 - r12, lr }
+
+ adr r0, sleep_save_misc
+
+ mrc p15, 0, r2, c15, c0, 0 @
On 19 August 2011 19:29, Kyungmin Park kmp...@infradead.org wrote:
On Fri, Aug 19, 2011 at 10:09 PM, Amit Daniel Kachhap
amit.kach...@linaro.org wrote:
This adds a function to get the revision id.
Signed-off-by: Jaecheol Lee jc@samsung.com
Signed-off-by: Changhwan Youn
On Wed, Jul 9, 2014 at 8:30 AM, Chanwoo Choi cw00.c...@samsung.com wrote:
On 07/01/2014 09:33 AM, Chanwoo Choi wrote:
This patch add registers, bit fields and compatible strings for Exynos3250
TMU
(Thermal Management Unit). Exynos3250 uses the Cortex-A7 dual cores and has
a target speed of
80 matches
Mail list logo