On Fri, 2013-07-26 at 09:54 -0700, Andy Lutomirski wrote:
This is kernel 3.9.9-302.fc19.x86_64.
I plugged in a BN Nook (a usb mass storage device), used it, and
ejected it. This makes suspend fail:
[50135.265514] PM: Entering freeze sleep
[50135.265517] Suspending console(s) (use
On Fri, 2013-07-26 at 16:31 -0400, Alan Stern wrote:
In addition to my earlier comment, the patch below should be applied.
It will fix your immediate problem, although not in the best way.
Alan,
I think your diagnosis is correct, but not the fix.
This is run even in the runtime case. We
On 7/26/2013 7:15 PM, Seungwon Jeon wrote:
Fatal error in OCS(overall command status) field indicates
error conditions which is not covered by UFSHCI.
It means that host cannot define the result of command status
and therefore host may need to check transfer response UPIU's
response and status
On 7/26/2013 7:16 PM, Seungwon Jeon wrote:
Except for 'GOOD' and 'CHECK CONDITION', other status value
This is what UFS device spec says: A GOOD status indicates successful
SCSI completion and therefore no Sense Data will be returned. So please
change the commit text accordingly.
in Response
On 7/26/2013 7:16 PM, Seungwon Jeon wrote:
LACTH(Interrupt aggregation counter threshold) value is allowed
I guess you mean IACTH not LACTH. Other than this, change looks good
to me.
Reviewed-by: Subhash Jadavani subha...@codeaurora.org
up to 0x1F and current setting value is the maximum.
On 07/28/13 20:28, Alan Stern wrote:
On Sat, 27 Jul 2013, Stuart Foster wrote:
On 07/27/13 20:34, Alan Stern wrote:
On Sat, 27 Jul 2013, Stuart Foster wrote:
On 07/27/13 15:58, Alan Stern wrote:
On Sat, 27 Jul 2013, Stuart Foster wrote:
Hi,
I have started having problems with an
On 07/26/2013 04:09 AM, Jens Axboe wrote:
On Thu, Jul 25 2013, Nicholas A. Bellinger wrote:
On Thu, 2013-07-25 at 12:16 +0200, Alexander Gordeev wrote:
On Mon, Jul 22, 2013 at 02:10:36PM -0700, Nicholas A. Bellinger wrote:
Np. FYI, you'll want to use the latest commit e7827b351 HEAD from
On 7/26/2013 7:17 PM, Seungwon Jeon wrote:
Implements to support GET and SET operations of the DME.
These operations are used to configure the behavior of
the UNIPRO. Along with basic operation, {Peer/AttrSetType}
can be mixed.
Signed-off-by: Seungwon Jeon tgih@samsung.com
---
Looks good to me.
Reviewed-by: Subhash Jadavani subha...@codeaurora.org
On 7/26/2013 7:18 PM, Seungwon Jeon wrote:
'drivers/scsi/ufs/unipro.h' is added.
Attributes in the layers of the UNIPRO stack can be
read and written via the DME.
Signed-off-by: Seungwon Jeon tgih@samsung.com
---
On 7/24/2013 7:09 PM, Seungwon Jeon wrote:
On Wed, July 24, 2013, Sujit Reddy Thumma wrote:
On 7/23/2013 2:04 PM, Seungwon Jeon wrote:
On Sat, July 20, 2013, Sujit Reddy Thumma wrote:
On 7/19/2013 7:28 PM, Seungwon Jeon wrote:
On Tue, July 09, 2013, Sujit Reddy Thumma wrote:
Error handling
On 7/24/2013 7:09 PM, Seungwon Jeon wrote:
On Wed, July 24, 2013, Sujit Reddy Thumma wrote:
On 7/23/2013 1:57 PM, Seungwon Jeon wrote:
On Sat, July 20, 2013, Sujit Reddy Thumma wrote:
On 7/19/2013 7:27 PM, Seungwon Jeon wrote:
On Tue, July 09, 2013, Sujit Reddy Thumma wrote:
As of now SCSI
Change looks good except few minor comments.
On 7/26/2013 7:18 PM, Seungwon Jeon wrote:
Setting PA_PWRMode using DME_SET triggers the power mode
change. And then the result will be given by the HCS.UPMCRS.
This operation should be done atomically.
Signed-off-by: Seungwon Jeon
On Mon, July 29, 2013, Subhash Jadavani wrote:
On 7/26/2013 7:15 PM, Seungwon Jeon wrote:
Fatal error in OCS(overall command status) field indicates
error conditions which is not covered by UFSHCI.
It means that host cannot define the result of command status
and therefore host may need
My server's ARC-1210 has been working fine for years, but when I
upgraded from 3.10.1, it started failing:
Instead of
[0.784044] Areca RAID Controller0: F/W V1.46 2009-01-06 Model ARC-1210
[0.804028] scsi0 : Areca SATA Host Adapter RAID Controller
Driver Version 1.20.00.15 2010/08/05
On 7/29/2013 3:35 PM, Seungwon Jeon wrote:
On Mon, July 29, 2013, Subhash Jadavani wrote:
On 7/26/2013 7:15 PM, Seungwon Jeon wrote:
Fatal error in OCS(overall command status) field indicates
error conditions which is not covered by UFSHCI.
It means that host cannot define the result of
On 7/26/2013 7:16 PM, Seungwon Jeon wrote:
Except for 'GOOD' and 'CHECK CONDITION', other status value
in Response UPIU may or may contain sense data. If a non-zero
value is in the Data Segment Length field, it means that UPIU
has Sense Data in the Data Segment area.
Signed-off-by: Seungwon
On 7/29/2013 11:47 AM, Subhash Jadavani wrote:
On 7/26/2013 7:15 PM, Seungwon Jeon wrote:
Fatal error in OCS(overall command status) field indicates
error conditions which is not covered by UFSHCI.
It means that host cannot define the result of command status
and therefore host may need to
On Sat, 2013-07-27 at 02:07 +0900, Akinobu Mita wrote:
2013/7/26 Martin Peschke mpesc...@linux.vnet.ibm.com:
On Mon, 2013-07-15 at 20:52 +0900, Akinobu Mita wrote:
With module parameter num_parts 0, partition table is built on the
ramdisk storage when loading the driver. Unfortunately,
On Fri, Jul 26, 2013 at 05:43:13PM -0700, Nicholas A. Bellinger wrote:
On Fri, 2013-07-26 at 14:14 -0700, Nicholas A. Bellinger wrote:
On Thu, 2013-07-25 at 20:09 -0600, Jens Axboe wrote:
On Thu, Jul 25 2013, Nicholas A. Bellinger wrote:
On Thu, 2013-07-25 at 12:16 +0200, Alexander
On Fri, Jul 26, 2013 at 12:28:26PM -0400, Santosh Shilimkar wrote:
On Friday 26 July 2013 11:10 AM, Russell King - ARM Linux wrote:
On Fri, Jul 12, 2013 at 05:48:09PM -0400, Santosh Shilimkar wrote:
The series is an attempt to move ARM port to NO_BOOTMEM. As discussed
on list NO_BOOTMEM
https://bugzilla.kernel.org/show_bug.cgi?id=60644
Sreekanth Reddy sreekanth.re...@lsi.com changed:
What|Removed |Added
CC|
Hello,
On Fri, Jul 26, 2013 at 02:14:36PM -0700, Nicholas A. Bellinger wrote:
So I don't think (completely) getting rid of ata_port-qcmds[] will be
possible, and just converting the ata_scsi_queuecmd() path to use the
extra SHT-cmd_size pre-allocation for *ata_queued_cmd might end up
being
Yo,
On Fri, Jul 26, 2013 at 05:43:13PM -0700, Nicholas A. Bellinger wrote:
Considering there can be more than a single ata_device hanging off each
ata_port, the '*sdev = ap-link.device[0].sdev' in __ata_qc_from_tag()
is definitely bogus, but I'm not sure how else to correlate
blk-mq/scsi-mq
Hi Nick,
On 07/29/2013 12:10 PM, Nick Alcock wrote:
My server's ARC-1210 has been working fine for years, but when I
upgraded from 3.10.1, it started failing:
Instead of
[0.784044] Areca RAID Controller0: F/W V1.46 2009-01-06 Model ARC-1210
[0.804028] scsi0 : Areca SATA Host Adapter
On 29 Jul 2013, Bernd Schubert said:
Hi Nick,
On 07/29/2013 12:10 PM, Nick Alcock wrote:
arcmsr0: abort device command of scsi id = 0 lun = 1
arcmsr0: abort device command of scsi id = 0 lun = 0
arcmsr: executing bus reset eh.num_resets=0, num_[...]
arcmsr0: wait 'abort all
On Monday 29 July 2013 07:15 AM, Russell King - ARM Linux wrote:
On Fri, Jul 26, 2013 at 12:28:26PM -0400, Santosh Shilimkar wrote:
On Friday 26 July 2013 11:10 AM, Russell King - ARM Linux wrote:
On Fri, Jul 12, 2013 at 05:48:09PM -0400, Santosh Shilimkar wrote:
The series is an attempt to
On Mon, Jul 29, 2013 at 09:26:44AM -0400, Santosh Shilimkar wrote:
On Monday 29 July 2013 07:15 AM, Russell King - ARM Linux wrote:
Would you mind putting them all in the patch system, I can add the acks
should anyone supply them later, and I'll repost them along with my set
of dma-mask
On Monday 29 July 2013 09:40 AM, Russell King - ARM Linux wrote:
On Mon, Jul 29, 2013 at 09:26:44AM -0400, Santosh Shilimkar wrote:
On Monday 29 July 2013 07:15 AM, Russell King - ARM Linux wrote:
Would you mind putting them all in the patch system, I can add the acks
should anyone supply them
On 07/29/2013 05:46 AM, Tejun Heo wrote:
Hello,
On Fri, Jul 26, 2013 at 02:14:36PM -0700, Nicholas A. Bellinger wrote:
So I don't think (completely) getting rid of ata_port-qcmds[] will be
possible, and just converting the ata_scsi_queuecmd() path to use the
extra SHT-cmd_size
On 07/29/2013 05:18 AM, Alexander Gordeev wrote:
-static struct ata_queued_cmd *ata_qc_new(struct ata_port *ap)
+static struct ata_queued_cmd *ata_qc_new(struct ata_port *ap,
+struct scsi_cmnd *sc)
{
struct ata_queued_cmd *qc = NULL;
-
https://bugzilla.kernel.org/show_bug.cgi?id=60644
--- Comment #4 from livea...@live.com ---
Hi .
I'll attach it , however dmesg only shows the last 16000 events . I hope it
would be enough .
Sorry for being a noob in reporting my first bug , but can you tell me how can
I find the exact IO rate
https://bugzilla.kernel.org/show_bug.cgi?id=60644
--- Comment #5 from livea...@live.com ---
Created attachment 107033
-- https://bugzilla.kernel.org/attachment.cgi?id=107033action=edit
dmeg logs 2
--
You are receiving this mail because:
You are watching the assignee of the bug.
--
To
On 07/29/2013 03:05 PM, Nix wrote:
On 29 Jul 2013, Bernd Schubert said:
Hi Nick,
On 07/29/2013 12:10 PM, Nick Alcock wrote:
arcmsr0: abort device command of scsi id = 0 lun = 1
arcmsr0: abort device command of scsi id = 0 lun = 0
arcmsr: executing bus reset eh.num_resets=0, num_[...]
On Mon, 29 Jul 2013, Oliver Neukum wrote:
On Fri, 2013-07-26 at 16:31 -0400, Alan Stern wrote:
In addition to my earlier comment, the patch below should be applied.
It will fix your immediate problem, although not in the best way.
Alan,
I think your diagnosis is correct, but not
Nick == Nick Alcock n...@esperi.org.uk writes:
Nick My server's ARC-1210 has been working fine for years, but when I
Nick upgraded from 3.10.1, it started failing:
Nick [ 0.784044] Areca RAID Controller0: F/W V1.46 2009-01-06 Model
Nick ARC-1210 [ 0.804028] scsi0 : Areca SATA Host Adapter RAID
Bernd == Bernd Schubert bernd.schub...@fastmail.fm writes:
Bernd I tested this patch with ARC-1260 and F/W V1.49, no issues.
It could be due to the firmware version discrepancy.
--
Martin K. Petersen Oracle Linux Engineering
--
To unsubscribe from this list: send the line unsubscribe
On 29 Jul 2013, Bernd Schubert spake thusly:
On 07/29/2013 03:05 PM, Nix wrote:
On 29 Jul 2013, Bernd Schubert said:
I tested this patch with ARC-1260 and F/W V1.49, no issues. Also, this
patch is only in 3.10.3, but not yet in 3.10.1.
... and I see this problem with 3.10.3 but not 3.10.1.
Alan == Alan Stern st...@rowland.harvard.edu writes:
Alan,
Alan It was introduced by commit 98dcc2946adb (SCSI: sd: Update WRITE
Alan SAME heuristics). This commit adds a call to scsi_get_vpd_page()
Alan in sd_read_write_same() without first checking
Alan sd_try_extended_inquiry(). As noted
On Mon, 29 Jul 2013, Martin K. Petersen wrote:
Alan == Alan Stern st...@rowland.harvard.edu writes:
Alan,
Alan It was introduced by commit 98dcc2946adb (SCSI: sd: Update WRITE
Alan SAME heuristics). This commit adds a call to scsi_get_vpd_page()
Alan in sd_read_write_same() without
Alan == Alan Stern st...@rowland.harvard.edu writes:
Alan In the case of these bug reports, the scsi_report_opcode() call
Alan returns -EINVAL.
Oh, right. Because I actually do an explicit SCSI version check in
scsi_report_opcode(). That's OK, then...
--
Martin K. Petersen Oracle Linux
On 07/29/13 16:23, Alan Stern wrote:
On Mon, 29 Jul 2013, Martin K. Petersen wrote:
Alan == Alan Stern st...@rowland.harvard.edu writes:
Alan,
Alan It was introduced by commit 98dcc2946adb (SCSI: sd: Update WRITE
Alan SAME heuristics). This commit adds a call to scsi_get_vpd_page()
Alan in
On Fri, Jul 26, 2013 at 7:15 PM, Seungwon Jeon tgih@samsung.com wrote:
Fatal error in OCS(overall command status) field indicates
error conditions which is not covered by UFSHCI.
It means that host cannot define the result of command status
and therefore host may need to check transfer
On 7/28/2013 10:40 PM, Santosh Y wrote:
+
/**
* ufshcd_pltfrm_probe - probe routine of the driver
* @pdev: pointer to Platform device handle
@@ -122,14 +157,20 @@ static int ufshcd_pltfrm_probe(struct platform_device
*pdev)
goto out;
}
+
On Mon, 2013-07-29 at 07:50 -0400, Tejun Heo wrote:
Yo,
On Fri, Jul 26, 2013 at 05:43:13PM -0700, Nicholas A. Bellinger wrote:
Considering there can be more than a single ata_device hanging off each
ata_port, the '*sdev = ap-link.device[0].sdev' in __ata_qc_from_tag()
is definitely
On Sun, Jul 28, 2013 at 10:40 PM, Santosh Y santos...@gmail.com wrote:
Hi James,
Please apply the following patches to 'misc' branch.
Thanks,
Santosh
Akinobu Mita (3):
ufshcd-pci: release ioremapped region during removing driver
ufs: don't disable_irq() if the IRQ can be shared among
Hi James,
Please apply the following patches to 'misc' branch.
Thanks,
Santosh
Akinobu Mita (3):
ufshcd-pci: release ioremapped region during removing driver
ufs: don't disable_irq() if the IRQ can be shared among devices
ufs: don't stop controller before scsi_remove_host()
Dolev Raviv
From: Sujit Reddy Thumma sthu...@codeaurora.org
As part of device initialization sequence, sending NOP OUT UPIU and
waiting for NOP IN UPIU response is mandatory. This confirms that the
device UFS Transport (UTP) layer is functional and the host can configure
the device with further commands. Add
From: Dolev Raviv dra...@codeaurora.org
Allow UFS device to complete its initialization and accept
SCSI commands by setting fDeviceInit flag. The device may take
time for this operation and hence the host should poll until
fDeviceInit flag is toggled to zero. This step is mandated by
UFS device
From: Sujit Reddy Thumma sthu...@codeaurora.org
Background operations in the UFS device can be disabled by
the host to reduce the response latency of transfer requests.
Add support for enabling/disabling the background operations
during runtime suspend/resume of the device.
If the device is in
From: Akinobu Mita m...@fixstars.com
Before commit 2953f850c3b80bdca004967c83733365d8aa0aa2 ([SCSI] ufs:
use devres functions for ufshcd), UFSHCI register was ioremapped by
each glue-driver (ufshcd-pltfrm and ufshcd-pci) during probing and it
was iounmapped by core-driver during removing driver.
From: Sujit Reddy Thumma sthu...@codeaurora.org
Add runtime PM helpers to suspend/resume UFS controller at runtime.
Enable runtime PM by default for pci and platform drivers as the
initialized hardware can suspend if it is not used after bootup.
Signed-off-by: Sujit Reddy Thumma
From: Akinobu Mita m...@fixstars.com
When removing the UFS driver, disable_irq() is called and the IRQ is
not enabled again. Unfortunately, the IRQ is requested with IRQF_SHARED
and it can be shared among several devices. So disabling the IRQ in
this way is just breaking other devices which are
From: Akinobu Mita m...@fixstars.com
scsi_remove_host() sends SYNCHRONIZE CACHE commands for write cache
enabled scsi disk devices. So stopping controller working shouldn't
be done before scsi_remove_host().
Signed-off-by: Akinobu Mita m...@fixstars.com
Cc: Vinayak Holikatti
From: Wei Yongjun yongjun_...@trendmicro.com.cn
There is a error message within devm_ioremap_resource
already, so remove the dev_err call to avoid redundant
error message.
Signed-off-by: Wei Yongjun yongjun_...@trendmicro.com.cn
Signed-off-by: Santosh Y santos...@gmail.com
diff --git
From: Wolfram Sang w...@the-dreams.de
devm_ioremap_resource does sanity checks on the given resource. No need to
duplicate this in the driver.
Signed-off-by: Wolfram Sang w...@the-dreams.de
Signed-off-by: Santosh Y santos...@gmail.com
diff --git a/drivers/scsi/ufs/ufshcd-pltfrm.c
On Mon, 2013-07-29 at 13:18 +0200, Alexander Gordeev wrote:
On Fri, Jul 26, 2013 at 05:43:13PM -0700, Nicholas A. Bellinger wrote:
On Fri, 2013-07-26 at 14:14 -0700, Nicholas A. Bellinger wrote:
SNIP
I also tried to make a quick conversion and hit the same issue(s) as you.
Generally, I am
On Thu, Jun 27, 2013 at 10:01 AM, Seungwon Jeon tgih@samsung.com wrote:
This patch replaces normal calls for resource allocation with devm_*()
derivative functions. It makes resource freeing simpler.
Signed-off-by: Seungwon Jeon tgih@samsung.com
Signed-off-by: Santosh Y
On 29 Jul 2013, Bernd Schubert spake thusly:
Could you try to run these commands with 3.10.1?
# # check if reporting opcodes works
# sg_opcodes -v -n /dev/sdX
spindle:/boot# sg_opcodes -v -n /dev/sda
inquiry cdb: 12 00 00 00 24 00
Report Supported Operation Codes cmd: a3 0c 00 00 00
https://bugzilla.kernel.org/show_bug.cgi?id=60648
Bug ID: 60648
Summary: csiostor/csio_scsi.c: out of bounds access
Product: SCSI Drivers
Version: 2.5
Kernel Version: 3.11rc2
Hardware: All
OS: Linux
Tree:
Nix == Nix n...@esperi.org.uk writes:
Nix spindle:/boot# sg_vpd --page=0x89 /dev/sda ATA information VPD
Nix page: fetching VPD page failed
Please add -v
I'll also need the output of:
# sg_vpd -vl
Nix I'll try rebooting into a kernel with that commit reverted next.
Doesn't matter as far
https://bugzilla.kernel.org/show_bug.cgi?id=60649
Bug ID: 60649
Summary: mpt3sas/mpt3sas_scsih.c: mem leak on error path
Product: SCSI Drivers
Version: 2.5
Kernel Version: 3.11rc2
Hardware: All
OS: Linux
On 29 Jul 2013, Bernd Schubert uttered the following:
On 07/29/2013 03:05 PM, Nix wrote:
On 29 Jul 2013, Bernd Schubert said:
Hi Nick,
On 07/29/2013 12:10 PM, Nick Alcock wrote:
arcmsr0: abort device command of scsi id = 0 lun = 1
arcmsr0: abort device command of scsi id = 0 lun = 0
From: Meelis Roos mr...@linux.ee
Date: Sun, 21 Apr 2013 14:02:11 +0300 (EEST)
I revived my Sun E3000 after its main disk died, reinstalled Debian and
after long apuse I am testing linux kernels again on it. In general it
works fine but I left the bad disk connected and sometimes it causes
From: David Miller da...@davemloft.net
Date: Mon, 29 Jul 2013 15:32:23 -0700 (PDT)
Therefore I think the fix is going to involve adding a member to
struct esp_cmd_entry called -orig_tag[] so that we can see what
the original tag[] values were at esp_alloc_lun_tag() time.
Please try this
https://bugzilla.kernel.org/show_bug.cgi?id=60644
--- Comment #6 from livea...@live.com ---
Hi again .
I did monitor the IO of the RAID array using IOstat tool .
I'll attach the output .
One thing I noticed is that monitoring the raid array made it survive a LOT
longer than before .
I simply
https://bugzilla.kernel.org/show_bug.cgi?id=60644
--- Comment #7 from livea...@live.com ---
Created attachment 107038
-- https://bugzilla.kernel.org/attachment.cgi?id=107038action=edit
iostat log
--
You are receiving this mail because:
You are watching the assignee of the bug.
--
To
Nix == Nix n...@esperi.org.uk writes:
Bernd,
Nix I can now confirm that reverting this commit causes this problem to
Nix go away, and my machine boots fine again.
Can you please send me the output of sq_inq with your 1.49 firmware?
I made a tweak that allowed Nix to boot but we're trying to
On 13-07-29 05:09 PM, Nix wrote:
On 29 Jul 2013, Bernd Schubert uttered the following:
On 07/29/2013 03:05 PM, Nix wrote:
On 29 Jul 2013, Bernd Schubert said:
Hi Nick,
On 07/29/2013 12:10 PM, Nick Alcock wrote:
arcmsr0: abort device command of scsi id = 0 lun = 1
arcmsr0: abort device
On 30 Jul 2013, Douglas Gilbert outgrape:
Please supply the information that Martin Petersen asked
for.
Did it in private IRC (the advantage of working for the same division of
the same company!)
I didn't realise the original fix was actually implemented to allow
Bernd, with a different Areca
On Fri, Jul 26, 2013 at 7:16 PM, Seungwon Jeon tgih@samsung.com wrote:
Except for 'GOOD' and 'CHECK CONDITION', other status value
in Response UPIU may or may contain sense data. If a non-zero
value is in the Data Segment Length field, it means that UPIU
has Sense Data in the Data Segment
https://bugzilla.kernel.org/show_bug.cgi?id=60644
--- Comment #8 from Sreekanth Reddy sreekanth.re...@lsi.com ---
Hi,
Can you please provide me the /var/log/message file as dmesg logs is not enough
to analysize this issue.
Thanks,
Sreekanth
--
You are receiving this mail because:
You are
https://bugzilla.kernel.org/show_bug.cgi?id=60644
--- Comment #9 from livea...@live.com ---
Hi .
Ok . Journal for this entire day will be attached . It starts at 12:00 AM
To save your time , mpt2sas errors start at (03:19:26) mark .
Thank you .
--
You are receiving this mail because:
You
https://bugzilla.kernel.org/show_bug.cgi?id=60644
--- Comment #10 from livea...@live.com ---
Created attachment 107041
-- https://bugzilla.kernel.org/attachment.cgi?id=107041action=edit
Journal 1
--
You are receiving this mail because:
You are watching the assignee of the bug.
--
To
Currently, sending Task Management (TM) command to the card might
be broken in some scenarios as listed below:
Problem: If there are more than 8 TM commands the implementation
returns error to the caller.
Fix: Wait for one of the slots to be emptied and send the command.
Problem:
As of now SCSI initiated error handling is broken because,
the reset APIs don't try to bring back the device initialized and
ready for further transfers.
In case of timeouts, the scsi error handler takes care of handling aborts
and resets. Improve the error handling in such scenario by resetting
The first patch fixes many issues with current task management handling
in UFSHCD driver. Others improve error handling in various scenarios.
These patches are rebased on:
[PATCH 9/9] drivers/scsi/ufs: don't check resource with devm_ioremap_resource
Changes from v4:
- Addressed comments
There is a possible race condition in the hardware when the abort
command is issued to terminate the ongoing SCSI command as described
below:
- A bit in the door-bell register is set in the controller for a
new SCSI command.
- In some rare situations, before controller get a chance to issue
Error handling in UFS driver is broken and resets the host controller
for fatal errors without re-initialization. Correct the fatal error
handling sequence according to UFS Host Controller Interface (HCI)
v1.1 specification.
o Processed requests which are completed w/wo error are reported to
78 matches
Mail list logo
