The patch is pretty boring ... just removing heaps of unused stuff.  The
diffstat is pretty interesting, though:

 aic7xxx_osm.c | 1681 ----------------------------------------------------------
 aic7xxx_osm.h |   40 -
 2 files changed, 10 insertions(+), 1711 deletions(-)

James

===== drivers/scsi/aic7xxx/aic7xxx_osm.c 1.64 vs edited =====
--- 1.64/drivers/scsi/aic7xxx/aic7xxx_osm.c     2005-04-11 13:12:25 -05:00
+++ edited/drivers/scsi/aic7xxx/aic7xxx_osm.c   2005-04-11 13:42:57 -05:00
@@ -275,39 +275,6 @@
 };
 
 /*
- * DV option:
- *
- * positive value = DV Enabled
- * zero                  = DV Disabled
- * negative value = DV Default for adapter type/seeprom
- */
-#ifdef CONFIG_AIC7XXX_DV_SETTING
-#define AIC7XXX_CONFIGED_DV CONFIG_AIC7XXX_DV_SETTING
-#else
-#define AIC7XXX_CONFIGED_DV -1
-#endif
-
-static int8_t aic7xxx_dv_settings[] =
-{
-       AIC7XXX_CONFIGED_DV,
-       AIC7XXX_CONFIGED_DV,
-       AIC7XXX_CONFIGED_DV,
-       AIC7XXX_CONFIGED_DV,
-       AIC7XXX_CONFIGED_DV,
-       AIC7XXX_CONFIGED_DV,
-       AIC7XXX_CONFIGED_DV,
-       AIC7XXX_CONFIGED_DV,
-       AIC7XXX_CONFIGED_DV,
-       AIC7XXX_CONFIGED_DV,
-       AIC7XXX_CONFIGED_DV,
-       AIC7XXX_CONFIGED_DV,
-       AIC7XXX_CONFIGED_DV,
-       AIC7XXX_CONFIGED_DV,
-       AIC7XXX_CONFIGED_DV,
-       AIC7XXX_CONFIGED_DV
-};
-
-/*
  * There should be a specific return value for this in scsi.h, but
  * it seems that most drivers ignore it.
  */
@@ -454,7 +421,6 @@
 "      tag_info:<tag_str>      Set per-target tag depth\n"
 "      global_tag_depth:<int>  Global tag depth for every target\n"
 "                              on every bus\n"
-"      dv:<dv_settings>        Set per-controller Domain Validation Setting.\n"
 "      seltime:<int>           Selection Timeout\n"
 "                              (0/256ms,1/128ms,2/64ms,3/32ms)\n"
 "\n"
@@ -471,7 +437,6 @@
                                         struct scb *);
 static void ahc_linux_queue_cmd_complete(struct ahc_softc *ahc,
                                         Scsi_Cmnd *cmd);
-static void ahc_linux_filter_inquiry(struct ahc_softc*, struct ahc_devinfo*);
 static void ahc_linux_sem_timeout(u_long arg);
 static void ahc_linux_freeze_simq(struct ahc_softc *ahc);
 static void ahc_linux_release_simq(u_long arg);
@@ -480,49 +445,8 @@
 static void ahc_linux_initialize_scsi_bus(struct ahc_softc *ahc);
 static void ahc_linux_size_nseg(void);
 static void ahc_linux_thread_run_complete_queue(struct ahc_softc *ahc);
-static void ahc_linux_start_dv(struct ahc_softc *ahc);
-static void ahc_linux_dv_timeout(struct scsi_cmnd *cmd);
-static int  ahc_linux_dv_thread(void *data);
-static void ahc_linux_kill_dv_thread(struct ahc_softc *ahc);
-static void ahc_linux_dv_target(struct ahc_softc *ahc, u_int target);
-static void ahc_linux_dv_transition(struct ahc_softc *ahc,
-                                   struct scsi_cmnd *cmd,
-                                   struct ahc_devinfo *devinfo,
-                                   struct ahc_linux_target *targ);
-static void ahc_linux_dv_fill_cmd(struct ahc_softc *ahc,
-                                 struct scsi_cmnd *cmd,
-                                 struct ahc_devinfo *devinfo);
-static void ahc_linux_dv_inq(struct ahc_softc *ahc,
-                            struct scsi_cmnd *cmd,
-                            struct ahc_devinfo *devinfo,
-                            struct ahc_linux_target *targ,
-                            u_int request_length);
-static void ahc_linux_dv_tur(struct ahc_softc *ahc,
-                            struct scsi_cmnd *cmd,
-                            struct ahc_devinfo *devinfo);
-static void ahc_linux_dv_rebd(struct ahc_softc *ahc,
-                             struct scsi_cmnd *cmd,
-                             struct ahc_devinfo *devinfo,
-                             struct ahc_linux_target *targ);
-static void ahc_linux_dv_web(struct ahc_softc *ahc,
-                            struct scsi_cmnd *cmd,
-                            struct ahc_devinfo *devinfo,
-                            struct ahc_linux_target *targ);
-static void ahc_linux_dv_reb(struct ahc_softc *ahc,
-                            struct scsi_cmnd *cmd,
-                            struct ahc_devinfo *devinfo,
-                            struct ahc_linux_target *targ);
-static void ahc_linux_dv_su(struct ahc_softc *ahc,
-                           struct scsi_cmnd *cmd,
-                           struct ahc_devinfo *devinfo,
-                           struct ahc_linux_target *targ);
-static int ahc_linux_fallback(struct ahc_softc *ahc,
-                             struct ahc_devinfo *devinfo);
-static void ahc_linux_dv_complete(Scsi_Cmnd *cmd);
-static void ahc_linux_generate_dv_pattern(struct ahc_linux_target *targ);
 static u_int ahc_linux_user_tagdepth(struct ahc_softc *ahc,
                                     struct ahc_devinfo *devinfo);
-static u_int ahc_linux_user_dv_setting(struct ahc_softc *ahc);
 static void ahc_linux_device_queue_depth(struct ahc_softc *ahc,
                                         struct ahc_linux_device *dev);
 static struct ahc_linux_target*        ahc_linux_alloc_target(struct 
ahc_softc*,
@@ -538,7 +462,6 @@
                                       struct ahc_linux_device*);
 static void ahc_linux_setup_tag_info_global(char *p);
 static aic_option_callback_t ahc_linux_setup_tag_info;
-static aic_option_callback_t ahc_linux_setup_dv;
 static int  aic7xxx_setup(char *s);
 static int  ahc_linux_next_unit(void);
 static void ahc_runq_tasklet(unsigned long data);
@@ -667,8 +590,7 @@
 {
        
        if ((ahc->flags & AHC_RESOURCE_SHORTAGE) != 0
-        || (ahc->platform_data->qfrozen != 0
-         && AHC_DV_SIMQ_FROZEN(ahc) == 0))
+           || (ahc->platform_data->qfrozen != 0))
                return (NULL);
        return (TAILQ_FIRST(&ahc->platform_data->device_runq));
 }
@@ -966,8 +888,7 @@
         * DV commands through so long as we are only frozen to
         * perform DV.
         */
-       if (ahc->platform_data->qfrozen != 0
-        && AHC_DV_CMD(cmd) == 0) {
+       if (ahc->platform_data->qfrozen != 0) {
 
                ahc_cmd_set_transaction_status(cmd, CAM_REQUEUE_REQ);
                ahc_linux_queue_cmd_complete(ahc, cmd);
@@ -1034,6 +955,11 @@
                ahc_linux_device_queue_depth(ahc, dev);
        }
        ahc_midlayer_entrypoint_unlock(ahc, &flags);
+
+       /* Initial Domain Validation */
+       if (!spi_initial_dv(device->sdev_target))
+               spi_dv_device(device);
+
        return (0);
 }
 
@@ -1549,18 +1475,6 @@
        }
 }
 
-static void
-ahc_linux_setup_dv(u_long arg, int instance, int targ, int32_t value)
-{
-
-       if ((instance >= 0)
-        && (instance < NUM_ELEMENTS(aic7xxx_dv_settings))) {
-               aic7xxx_dv_settings[instance] = value;
-               if (bootverbose)
-                       printf("dv[%d] = %d\n", instance, value);
-       }
-}
-
 /*
  * Handle Linux boot parameters. This routine allows for assigning a value
  * to a parameter with a ':' between the parameter and the value.
@@ -1620,9 +1534,6 @@
                } else if (strncmp(p, "tag_info", n) == 0) {
                        s = aic_parse_brace_option("tag_info", p + n, end,
                            2, ahc_linux_setup_tag_info, 0);
-               } else if (strncmp(p, "dv", n) == 0) {
-                       s = aic_parse_brace_option("dv", p + n, end, 1,
-                           ahc_linux_setup_dv, 0);
                } else if (p[n] == ':') {
                        *(options[i].flag) = simple_strtoul(p + n + 1, NULL, 0);
                } else if (strncmp(p, "verbose", n) == 0) {
@@ -1645,7 +1556,6 @@
        struct   Scsi_Host *host;
        char    *new_name;
        u_long   s;
-       u_int    targ_offset;
 
        template->name = ahc->description;
        host = scsi_host_alloc(template, sizeof(struct ahc_softc *));
@@ -1681,55 +1591,7 @@
        scsi_set_pci_device(host, ahc->dev_softc);
 #endif
        ahc_linux_initialize_scsi_bus(ahc);
-       ahc_unlock(ahc, &s);
-       ahc->platform_data->dv_pid = kernel_thread(ahc_linux_dv_thread, ahc, 0);
-       ahc_lock(ahc, &s);
-       if (ahc->platform_data->dv_pid < 0) {
-               printf("%s: Failed to create DV thread, error= %d\n",
-                      ahc_name(ahc), ahc->platform_data->dv_pid);
-               return (-ahc->platform_data->dv_pid);
-       }
-       /*
-        * Initially allocate *all* of our linux target objects
-        * so that the DV thread will scan them all in parallel
-        * just after driver initialization.  Any device that
-        * does not exist will have its target object destroyed
-        * by the selection timeout handler.  In the case of a
-        * device that appears after the initial DV scan, async
-        * negotiation will occur for the first command, and DV
-        * will comence should that first command be successful.
-        */
-       for (targ_offset = 0;
-            targ_offset < host->max_id * (host->max_channel + 1);
-            targ_offset++) {
-               u_int channel;
-               u_int target;
-
-               channel = 0;
-               target = targ_offset;
-               if (target > 7
-                && (ahc->features & AHC_TWIN) != 0) {
-                       channel = 1;
-                       target &= 0x7;
-               }
-               /*
-                * Skip our own ID.  Some Compaq/HP storage devices
-                * have enclosure management devices that respond to
-                * single bit selection (i.e. selecting ourselves).
-                * It is expected that either an external application
-                * or a modified kernel will be used to probe this
-                * ID if it is appropriate.  To accommodate these
-                * installations, ahc_linux_alloc_target() will allocate
-                * for our ID if asked to do so.
-                */
-               if ((channel == 0 && target == ahc->our_id)
-                || (channel == 1 && target == ahc->our_id_b))
-                       continue;
-
-               ahc_linux_alloc_target(ahc, channel, target);
-       }
        ahc_intr_enable(ahc, TRUE);
-       ahc_linux_start_dv(ahc);
        ahc_unlock(ahc, &s);
 
        host->transportt = ahc_linux_transport_template;
@@ -1866,8 +1728,6 @@
        ahc->platform_data->completeq_timer.function =
            (ahc_linux_callback_t *)ahc_linux_thread_run_complete_queue;
        init_MUTEX_LOCKED(&ahc->platform_data->eh_sem);
-       init_MUTEX_LOCKED(&ahc->platform_data->dv_sem);
-       init_MUTEX_LOCKED(&ahc->platform_data->dv_cmd_sem);
        tasklet_init(&ahc->platform_data->runq_tasklet, ahc_runq_tasklet,
                     (unsigned long)ahc);
        ahc->seltime = (aic7xxx_seltime & 0x3) << 4;
@@ -1887,7 +1747,6 @@
 
        if (ahc->platform_data != NULL) {
                del_timer_sync(&ahc->platform_data->completeq_timer);
-               ahc_linux_kill_dv_thread(ahc);
                tasklet_kill(&ahc->platform_data->runq_tasklet);
                if (ahc->platform_data->host != NULL) {
 #if LINUX_VERSION_CODE >= KERNEL_VERSION(2,5,0)
@@ -2126,1331 +1985,6 @@
        ahc_unlock(ahc, &flags);
 }
 
-static void
-ahc_linux_start_dv(struct ahc_softc *ahc)
-{
-
-       /*
-        * Freeze the simq and signal ahc_linux_queue to not let any
-        * more commands through.
-        */
-       if ((ahc->platform_data->flags & AHC_DV_ACTIVE) == 0) {
-#ifdef AHC_DEBUG
-               if (ahc_debug & AHC_SHOW_DV)
-                       printf("%s: Waking DV thread\n", ahc_name(ahc));
-#endif
-
-               ahc->platform_data->flags |= AHC_DV_ACTIVE;
-               ahc_linux_freeze_simq(ahc);
-
-               /* Wake up the DV kthread */
-               up(&ahc->platform_data->dv_sem);
-       }
-}
-
-static void
-ahc_linux_kill_dv_thread(struct ahc_softc *ahc)
-{
-       u_long s;
-
-       ahc_lock(ahc, &s);
-       if (ahc->platform_data->dv_pid != 0) {
-               ahc->platform_data->flags |= AHC_DV_SHUTDOWN;
-               ahc_unlock(ahc, &s);
-               up(&ahc->platform_data->dv_sem);
-
-               /*
-                * Use the eh_sem as an indicator that the
-                * dv thread is exiting.  Note that the dv
-                * thread must still return after performing
-                * the up on our semaphore before it has
-                * completely exited this module.  Unfortunately,
-                * there seems to be no easy way to wait for the
-                * exit of a thread for which you are not the
-                * parent (dv threads are parented by init).
-                * Cross your fingers...
-                */
-               down(&ahc->platform_data->eh_sem);
-
-               /*
-                * Mark the dv thread as already dead.  This
-                * avoids attempting to kill it a second time.
-                * This is necessary because we must kill the
-                * DV thread before calling ahc_free() in the
-                * module shutdown case to avoid bogus locking
-                * in the SCSI mid-layer, but we ahc_free() is
-                * called without killing the DV thread in the
-                * instance detach case, so ahc_platform_free()
-                * calls us again to verify that the DV thread
-                * is dead.
-                */
-               ahc->platform_data->dv_pid = 0;
-       } else {
-               ahc_unlock(ahc, &s);
-       }
-}
-
-static int
-ahc_linux_dv_thread(void *data)
-{
-       struct  ahc_softc *ahc;
-       int     target;
-       u_long  s;
-
-       ahc = (struct ahc_softc *)data;
-
-#ifdef AHC_DEBUG
-       if (ahc_debug & AHC_SHOW_DV)
-               printf("Launching DV Thread\n");
-#endif
-
-       /*
-        * Complete thread creation.
-        */
-       lock_kernel();
-#if LINUX_VERSION_CODE < KERNEL_VERSION(2,5,0)
-       /*
-        * Don't care about any signals.
-        */
-       siginitsetinv(&current->blocked, 0);
-
-       daemonize();
-       sprintf(current->comm, "ahc_dv_%d", ahc->unit);
-#else
-       daemonize("ahc_dv_%d", ahc->unit);
-       current->flags |= PF_FREEZE;
-#endif
-       unlock_kernel();
-
-       while (1) {
-               /*
-                * Use down_interruptible() rather than down() to
-                * avoid inclusion in the load average.
-                */
-               down_interruptible(&ahc->platform_data->dv_sem);
-
-               /* Check to see if we've been signaled to exit */
-               ahc_lock(ahc, &s);
-               if ((ahc->platform_data->flags & AHC_DV_SHUTDOWN) != 0) {
-                       ahc_unlock(ahc, &s);
-                       break;
-               }
-               ahc_unlock(ahc, &s);
-
-#ifdef AHC_DEBUG
-               if (ahc_debug & AHC_SHOW_DV)
-                       printf("%s: Beginning Domain Validation\n",
-                              ahc_name(ahc));
-#endif
-
-               /*
-                * Wait for any pending commands to drain before proceeding.
-                */
-               ahc_lock(ahc, &s);
-               while (LIST_FIRST(&ahc->pending_scbs) != NULL) {
-                       ahc->platform_data->flags |= AHC_DV_WAIT_SIMQ_EMPTY;
-                       ahc_unlock(ahc, &s);
-                       down_interruptible(&ahc->platform_data->dv_sem);
-                       ahc_lock(ahc, &s);
-               }
-
-               /*
-                * Wait for the SIMQ to be released so that DV is the
-                * only reason the queue is frozen.
-                */
-               while (AHC_DV_SIMQ_FROZEN(ahc) == 0) {
-                       ahc->platform_data->flags |= AHC_DV_WAIT_SIMQ_RELEASE;
-                       ahc_unlock(ahc, &s);
-                       down_interruptible(&ahc->platform_data->dv_sem);
-                       ahc_lock(ahc, &s);
-               }
-               ahc_unlock(ahc, &s);
-
-               for (target = 0; target < AHC_NUM_TARGETS; target++)
-                       ahc_linux_dv_target(ahc, target);
-
-               ahc_lock(ahc, &s);
-               ahc->platform_data->flags &= ~AHC_DV_ACTIVE;
-               ahc_unlock(ahc, &s);
-
-               /*
-                * Release the SIMQ so that normal commands are
-                * allowed to continue on the bus.
-                */
-               ahc_linux_release_simq((u_long)ahc);
-       }
-       up(&ahc->platform_data->eh_sem);
-       return (0);
-}
-
-#define AHC_LINUX_DV_INQ_SHORT_LEN     36
-#define AHC_LINUX_DV_INQ_LEN           256
-#define AHC_LINUX_DV_TIMEOUT           (HZ / 4)
-
-#define AHC_SET_DV_STATE(ahc, targ, newstate) \
-       ahc_set_dv_state(ahc, targ, newstate, __LINE__)
-
-static __inline void
-ahc_set_dv_state(struct ahc_softc *ahc, struct ahc_linux_target *targ,
-                ahc_dv_state newstate, u_int line)
-{
-       ahc_dv_state oldstate;
-
-       oldstate = targ->dv_state;
-#ifdef AHC_DEBUG
-       if (ahc_debug & AHC_SHOW_DV)
-               printf("%s:%d: Going from state %d to state %d\n",
-                      ahc_name(ahc), line, oldstate, newstate);
-#endif
-
-       if (oldstate == newstate)
-               targ->dv_state_retry++;
-       else
-               targ->dv_state_retry = 0;
-       targ->dv_state = newstate;
-}
-
-static void
-ahc_linux_dv_target(struct ahc_softc *ahc, u_int target_offset)
-{
-       struct   ahc_devinfo devinfo;
-       struct   ahc_linux_target *targ;
-       struct   scsi_cmnd *cmd;
-       struct   scsi_device *scsi_dev;
-       struct   scsi_sense_data *sense;
-       uint8_t *buffer;
-       u_long   s;
-       u_int    timeout;
-       int      echo_size;
-
-       sense = NULL;
-       buffer = NULL;
-       echo_size = 0;
-       ahc_lock(ahc, &s);
-       targ = ahc->platform_data->targets[target_offset];
-       if (targ == NULL || (targ->flags & AHC_DV_REQUIRED) == 0) {
-               ahc_unlock(ahc, &s);
-               return;
-       }
-       ahc_compile_devinfo(&devinfo,
-                           targ->channel == 0 ? ahc->our_id : ahc->our_id_b,
-                           targ->target, /*lun*/0, targ->channel + 'A',
-                           ROLE_INITIATOR);
-#ifdef AHC_DEBUG
-       if (ahc_debug & AHC_SHOW_DV) {
-               ahc_print_devinfo(ahc, &devinfo);
-               printf("Performing DV\n");
-       }
-#endif
-
-       ahc_unlock(ahc, &s);
-
-       cmd = malloc(sizeof(struct scsi_cmnd), M_DEVBUF, M_WAITOK);
-       scsi_dev = malloc(sizeof(struct scsi_device), M_DEVBUF, M_WAITOK);
-       scsi_dev->host = ahc->platform_data->host;
-       scsi_dev->id = devinfo.target;
-       scsi_dev->lun = devinfo.lun;
-       scsi_dev->channel = devinfo.channel - 'A';
-       ahc->platform_data->dv_scsi_dev = scsi_dev;
-
-       AHC_SET_DV_STATE(ahc, targ, AHC_DV_STATE_INQ_SHORT_ASYNC);
-
-       while (targ->dv_state != AHC_DV_STATE_EXIT) {
-               timeout = AHC_LINUX_DV_TIMEOUT;
-               switch (targ->dv_state) {
-               case AHC_DV_STATE_INQ_SHORT_ASYNC:
-               case AHC_DV_STATE_INQ_ASYNC:
-               case AHC_DV_STATE_INQ_ASYNC_VERIFY:
-                       /*
-                        * Set things to async narrow to reduce the
-                        * chance that the INQ will fail.
-                        */
-                       ahc_lock(ahc, &s);
-                       ahc_set_syncrate(ahc, &devinfo, NULL, 0, 0, 0,
-                                        AHC_TRANS_GOAL, /*paused*/FALSE);
-                       ahc_set_width(ahc, &devinfo, MSG_EXT_WDTR_BUS_8_BIT,
-                                     AHC_TRANS_GOAL, /*paused*/FALSE);
-                       ahc_unlock(ahc, &s);
-                       timeout = 10 * HZ;
-                       targ->flags &= ~AHC_INQ_VALID;
-                       /* FALLTHROUGH */
-               case AHC_DV_STATE_INQ_VERIFY:
-               {
-                       u_int inq_len;
-
-                       if (targ->dv_state == AHC_DV_STATE_INQ_SHORT_ASYNC)
-                               inq_len = AHC_LINUX_DV_INQ_SHORT_LEN;
-                       else
-                               inq_len = targ->inq_data->additional_length + 5;
-                       ahc_linux_dv_inq(ahc, cmd, &devinfo, targ, inq_len);
-                       break;
-               }
-               case AHC_DV_STATE_TUR:
-               case AHC_DV_STATE_BUSY:
-                       timeout = 5 * HZ;
-                       ahc_linux_dv_tur(ahc, cmd, &devinfo);
-                       break;
-               case AHC_DV_STATE_REBD:
-                       ahc_linux_dv_rebd(ahc, cmd, &devinfo, targ);
-                       break;
-               case AHC_DV_STATE_WEB:
-                       ahc_linux_dv_web(ahc, cmd, &devinfo, targ);
-                       break;
-
-               case AHC_DV_STATE_REB:
-                       ahc_linux_dv_reb(ahc, cmd, &devinfo, targ);
-                       break;
-
-               case AHC_DV_STATE_SU:
-                       ahc_linux_dv_su(ahc, cmd, &devinfo, targ);
-                       timeout = 50 * HZ;
-                       break;
-
-               default:
-                       ahc_print_devinfo(ahc, &devinfo);
-                       printf("Unknown DV state %d\n", targ->dv_state);
-                       goto out;
-               }
-
-               /* Queue the command and wait for it to complete */
-               /* Abuse eh_timeout in the scsi_cmnd struct for our purposes */
-               init_timer(&cmd->eh_timeout);
-#ifdef AHC_DEBUG
-               if ((ahc_debug & AHC_SHOW_MESSAGES) != 0)
-                       /*
-                        * All of the printfs during negotiation
-                        * really slow down the negotiation.
-                        * Add a bit of time just to be safe.
-                        */
-                       timeout += HZ;
-#endif
-               scsi_add_timer(cmd, timeout, ahc_linux_dv_timeout);
-               /*
-                * In 2.5.X, it is assumed that all calls from the
-                * "midlayer" (which we are emulating) will have the
-                * ahc host lock held.  For other kernels, the
-                * io_request_lock must be held.
-                */
-#if AHC_SCSI_HAS_HOST_LOCK != 0
-               ahc_lock(ahc, &s);
-#else
-               spin_lock_irqsave(&io_request_lock, s);
-#endif
-               ahc_linux_queue(cmd, ahc_linux_dv_complete);
-#if AHC_SCSI_HAS_HOST_LOCK != 0
-               ahc_unlock(ahc, &s);
-#else
-               spin_unlock_irqrestore(&io_request_lock, s);
-#endif
-               down_interruptible(&ahc->platform_data->dv_cmd_sem);
-               /*
-                * Wait for the SIMQ to be released so that DV is the
-                * only reason the queue is frozen.
-                */
-               ahc_lock(ahc, &s);
-               while (AHC_DV_SIMQ_FROZEN(ahc) == 0) {
-                       ahc->platform_data->flags |= AHC_DV_WAIT_SIMQ_RELEASE;
-                       ahc_unlock(ahc, &s);
-                       down_interruptible(&ahc->platform_data->dv_sem);
-                       ahc_lock(ahc, &s);
-               }
-               ahc_unlock(ahc, &s);
-
-               ahc_linux_dv_transition(ahc, cmd, &devinfo, targ);
-       }
-
-out:
-       if ((targ->flags & AHC_INQ_VALID) != 0
-        && ahc_linux_get_device(ahc, devinfo.channel - 'A',
-                                devinfo.target, devinfo.lun,
-                                /*alloc*/FALSE) == NULL) {
-               /*
-                * The DV state machine failed to configure this device.  
-                * This is normal if DV is disabled.  Since we have inquiry
-                * data, filter it and use the "optimistic" negotiation
-                * parameters found in the inquiry string.
-                */
-               ahc_linux_filter_inquiry(ahc, &devinfo);
-               if ((targ->flags & (AHC_BASIC_DV|AHC_ENHANCED_DV)) != 0) {
-                       ahc_print_devinfo(ahc, &devinfo);
-                       printf("DV failed to configure device.  "
-                              "Please file a bug report against "
-                              "this driver.\n");
-               }
-       }
-
-       if (cmd != NULL)
-               free(cmd, M_DEVBUF);
-
-       if (ahc->platform_data->dv_scsi_dev != NULL) {
-               free(ahc->platform_data->dv_scsi_dev, M_DEVBUF);
-               ahc->platform_data->dv_scsi_dev = NULL;
-       }
-
-       ahc_lock(ahc, &s);
-       if (targ->dv_buffer != NULL) {
-               free(targ->dv_buffer, M_DEVBUF);
-               targ->dv_buffer = NULL;
-       }
-       if (targ->dv_buffer1 != NULL) {
-               free(targ->dv_buffer1, M_DEVBUF);
-               targ->dv_buffer1 = NULL;
-       }
-       targ->flags &= ~AHC_DV_REQUIRED;
-       if (targ->refcount == 0)
-               ahc_linux_free_target(ahc, targ);
-       ahc_unlock(ahc, &s);
-}
-
-static void
-ahc_linux_dv_transition(struct ahc_softc *ahc, struct scsi_cmnd *cmd,
-                       struct ahc_devinfo *devinfo,
-                       struct ahc_linux_target *targ)
-{
-       u_int32_t status;
-
-       status = aic_error_action(cmd, targ->inq_data,
-                                 ahc_cmd_get_transaction_status(cmd),
-                                 ahc_cmd_get_scsi_status(cmd));
-       
-#ifdef AHC_DEBUG
-       if (ahc_debug & AHC_SHOW_DV) {
-               ahc_print_devinfo(ahc, devinfo);
-               printf("Entering ahc_linux_dv_transition, state= %d, "
-                      "status= 0x%x, cmd->result= 0x%x\n", targ->dv_state,
-                      status, cmd->result);
-       }
-#endif
-
-       switch (targ->dv_state) {
-       case AHC_DV_STATE_INQ_SHORT_ASYNC:
-       case AHC_DV_STATE_INQ_ASYNC:
-               switch (status & SS_MASK) {
-               case SS_NOP:
-               {
-                       AHC_SET_DV_STATE(ahc, targ, targ->dv_state+1);
-                       break;
-               }
-               case SS_INQ_REFRESH:
-                       AHC_SET_DV_STATE(ahc, targ,
-                                        AHC_DV_STATE_INQ_SHORT_ASYNC);
-                       break;
-               case SS_TUR:
-               case SS_RETRY:
-                       AHC_SET_DV_STATE(ahc, targ, targ->dv_state);
-                       if (ahc_cmd_get_transaction_status(cmd)
-                        == CAM_REQUEUE_REQ)
-                               targ->dv_state_retry--;
-                       if ((status & SS_ERRMASK) == EBUSY)
-                               AHC_SET_DV_STATE(ahc, targ, AHC_DV_STATE_BUSY);
-                       if (targ->dv_state_retry < 10)
-                               break;
-                       /* FALLTHROUGH */
-               default:
-                       AHC_SET_DV_STATE(ahc, targ, AHC_DV_STATE_EXIT);
-#ifdef AHC_DEBUG
-                       if (ahc_debug & AHC_SHOW_DV) {
-                               ahc_print_devinfo(ahc, devinfo);
-                               printf("Failed DV inquiry, skipping\n");
-                       }
-#endif
-                       break;
-               }
-               break;
-       case AHC_DV_STATE_INQ_ASYNC_VERIFY:
-               switch (status & SS_MASK) {
-               case SS_NOP:
-               {
-                       u_int xportflags;
-                       u_int spi3data;
-
-                       if (memcmp(targ->inq_data, targ->dv_buffer,
-                                  AHC_LINUX_DV_INQ_LEN) != 0) {
-                               /*
-                                * Inquiry data must have changed.
-                                * Try from the top again.
-                                */
-                               AHC_SET_DV_STATE(ahc, targ,
-                                                AHC_DV_STATE_INQ_SHORT_ASYNC);
-                               break;
-                       }
-
-                       AHC_SET_DV_STATE(ahc, targ, targ->dv_state+1);
-                       targ->flags |= AHC_INQ_VALID;
-                       if (ahc_linux_user_dv_setting(ahc) == 0)
-                               break;
-
-                       xportflags = targ->inq_data->flags;
-                       if ((xportflags & (SID_Sync|SID_WBus16)) == 0)
-                               break;
-
-                       spi3data = targ->inq_data->spi3data;
-                       switch (spi3data & SID_SPI_CLOCK_DT_ST) {
-                       default:
-                       case SID_SPI_CLOCK_ST:
-                               /* Assume only basic DV is supported. */
-                               targ->flags |= AHC_BASIC_DV;
-                               break;
-                       case SID_SPI_CLOCK_DT:
-                       case SID_SPI_CLOCK_DT_ST:
-                               targ->flags |= AHC_ENHANCED_DV;
-                               break;
-                       }
-                       break;
-               }
-               case SS_INQ_REFRESH:
-                       AHC_SET_DV_STATE(ahc, targ,
-                                        AHC_DV_STATE_INQ_SHORT_ASYNC);
-                       break;
-               case SS_TUR:
-               case SS_RETRY:
-                       AHC_SET_DV_STATE(ahc, targ, targ->dv_state);
-                       if (ahc_cmd_get_transaction_status(cmd)
-                        == CAM_REQUEUE_REQ)
-                               targ->dv_state_retry--;
-
-                       if ((status & SS_ERRMASK) == EBUSY)
-                               AHC_SET_DV_STATE(ahc, targ, AHC_DV_STATE_BUSY);
-                       if (targ->dv_state_retry < 10)
-                               break;
-                       /* FALLTHROUGH */
-               default:
-                       AHC_SET_DV_STATE(ahc, targ, AHC_DV_STATE_EXIT);
-#ifdef AHC_DEBUG
-                       if (ahc_debug & AHC_SHOW_DV) {
-                               ahc_print_devinfo(ahc, devinfo);
-                               printf("Failed DV inquiry, skipping\n");
-                       }
-#endif
-                       break;
-               }
-               break;
-       case AHC_DV_STATE_INQ_VERIFY:
-               switch (status & SS_MASK) {
-               case SS_NOP:
-               {
-
-                       if (memcmp(targ->inq_data, targ->dv_buffer,
-                                  AHC_LINUX_DV_INQ_LEN) == 0) {
-                               AHC_SET_DV_STATE(ahc, targ, AHC_DV_STATE_EXIT);
-                               break;
-                       }
-#ifdef AHC_DEBUG
-                       if (ahc_debug & AHC_SHOW_DV) {
-                               int i;
-
-                               ahc_print_devinfo(ahc, devinfo);
-                               printf("Inquiry buffer mismatch:");
-                               for (i = 0; i < AHC_LINUX_DV_INQ_LEN; i++) {
-                                       if ((i & 0xF) == 0)
-                                               printf("\n        ");
-                                       printf("0x%x:0x0%x ",
-                                              ((uint8_t *)targ->inq_data)[i], 
-                                              targ->dv_buffer[i]);
-                               }
-                               printf("\n");
-                       }
-#endif
-
-                       if (ahc_linux_fallback(ahc, devinfo) != 0) {
-                               AHC_SET_DV_STATE(ahc, targ, AHC_DV_STATE_EXIT);
-                               break;
-                       }
-                       /*
-                        * Do not count "falling back"
-                        * against our retries.
-                        */
-                       targ->dv_state_retry = 0;
-                       AHC_SET_DV_STATE(ahc, targ, targ->dv_state);
-                       break;
-               }
-               case SS_INQ_REFRESH:
-                       AHC_SET_DV_STATE(ahc, targ,
-                                        AHC_DV_STATE_INQ_SHORT_ASYNC);
-                       break;
-               case SS_TUR:
-               case SS_RETRY:
-                       AHC_SET_DV_STATE(ahc, targ, targ->dv_state);
-                       if (ahc_cmd_get_transaction_status(cmd)
-                        == CAM_REQUEUE_REQ) {
-                               targ->dv_state_retry--;
-                       } else if ((status & SSQ_FALLBACK) != 0) {
-                               if (ahc_linux_fallback(ahc, devinfo) != 0) {
-                                       AHC_SET_DV_STATE(ahc, targ,
-                                                        AHC_DV_STATE_EXIT);
-                                       break;
-                               }
-                               /*
-                                * Do not count "falling back"
-                                * against our retries.
-                                */
-                               targ->dv_state_retry = 0;
-                       } else if ((status & SS_ERRMASK) == EBUSY)
-                               AHC_SET_DV_STATE(ahc, targ, AHC_DV_STATE_BUSY);
-                       if (targ->dv_state_retry < 10)
-                               break;
-                       /* FALLTHROUGH */
-               default:
-                       AHC_SET_DV_STATE(ahc, targ, AHC_DV_STATE_EXIT);
-#ifdef AHC_DEBUG
-                       if (ahc_debug & AHC_SHOW_DV) {
-                               ahc_print_devinfo(ahc, devinfo);
-                               printf("Failed DV inquiry, skipping\n");
-                       }
-#endif
-                       break;
-               }
-               break;
-
-       case AHC_DV_STATE_TUR:
-               switch (status & SS_MASK) {
-               case SS_NOP:
-                       if ((targ->flags & AHC_BASIC_DV) != 0) {
-                               ahc_linux_filter_inquiry(ahc, devinfo);
-                               AHC_SET_DV_STATE(ahc, targ,
-                                                AHC_DV_STATE_INQ_VERIFY);
-                       } else if ((targ->flags & AHC_ENHANCED_DV) != 0) {
-                               AHC_SET_DV_STATE(ahc, targ, AHC_DV_STATE_REBD);
-                       } else {
-                               AHC_SET_DV_STATE(ahc, targ, AHC_DV_STATE_EXIT);
-                       }
-                       break;
-               case SS_RETRY:
-               case SS_TUR:
-                       if ((status & SS_ERRMASK) == EBUSY) {
-                               AHC_SET_DV_STATE(ahc, targ, AHC_DV_STATE_BUSY);
-                               break;
-                       }
-                       AHC_SET_DV_STATE(ahc, targ, targ->dv_state);
-                       if (ahc_cmd_get_transaction_status(cmd)
-                        == CAM_REQUEUE_REQ) {
-                               targ->dv_state_retry--;
-                       } else if ((status & SSQ_FALLBACK) != 0) {
-                               if (ahc_linux_fallback(ahc, devinfo) != 0) {
-                                       AHC_SET_DV_STATE(ahc, targ,
-                                                        AHC_DV_STATE_EXIT);
-                                       break;
-                               }
-                               /*
-                                * Do not count "falling back"
-                                * against our retries.
-                                */
-                               targ->dv_state_retry = 0;
-                       }
-                       if (targ->dv_state_retry >= 10) {
-#ifdef AHC_DEBUG
-                               if (ahc_debug & AHC_SHOW_DV) {
-                                       ahc_print_devinfo(ahc, devinfo);
-                                       printf("DV TUR reties exhausted\n");
-                               }
-#endif
-                               AHC_SET_DV_STATE(ahc, targ, AHC_DV_STATE_EXIT);
-                               break;
-                       }
-                       if (status & SSQ_DELAY)
-                               ssleep(1);
-
-                       break;
-               case SS_START:
-                       AHC_SET_DV_STATE(ahc, targ, AHC_DV_STATE_SU);
-                       break;
-               case SS_INQ_REFRESH:
-                       AHC_SET_DV_STATE(ahc, targ,
-                                        AHC_DV_STATE_INQ_SHORT_ASYNC);
-                       break;
-               default:
-                       AHC_SET_DV_STATE(ahc, targ, AHC_DV_STATE_EXIT);
-                       break;
-               }
-               break;
-
-       case AHC_DV_STATE_REBD:
-               switch (status & SS_MASK) {
-               case SS_NOP:
-               {
-                       uint32_t echo_size;
-
-                       AHC_SET_DV_STATE(ahc, targ, AHC_DV_STATE_WEB);
-                       echo_size = scsi_3btoul(&targ->dv_buffer[1]);
-                       echo_size &= 0x1FFF;
-#ifdef AHC_DEBUG
-                       if (ahc_debug & AHC_SHOW_DV) {
-                               ahc_print_devinfo(ahc, devinfo);
-                               printf("Echo buffer size= %d\n", echo_size);
-                       }
-#endif
-                       if (echo_size == 0) {
-                               AHC_SET_DV_STATE(ahc, targ, AHC_DV_STATE_EXIT);
-                               break;
-                       }
-
-                       /* Generate the buffer pattern */
-                       targ->dv_echo_size = echo_size;
-                       ahc_linux_generate_dv_pattern(targ);
-                       /*
-                        * Setup initial negotiation values.
-                        */
-                       ahc_linux_filter_inquiry(ahc, devinfo);
-                       break;
-               }
-               case SS_INQ_REFRESH:
-                       AHC_SET_DV_STATE(ahc, targ,
-                                        AHC_DV_STATE_INQ_SHORT_ASYNC);
-                       break;
-               case SS_RETRY:
-                       AHC_SET_DV_STATE(ahc, targ, targ->dv_state);
-                       if (ahc_cmd_get_transaction_status(cmd)
-                        == CAM_REQUEUE_REQ)
-                               targ->dv_state_retry--;
-                       if (targ->dv_state_retry <= 10)
-                               break;
-#ifdef AHC_DEBUG
-                       if (ahc_debug & AHC_SHOW_DV) {
-                               ahc_print_devinfo(ahc, devinfo);
-                               printf("DV REBD reties exhausted\n");
-                       }
-#endif
-                       /* FALLTHROUGH */
-               case SS_FATAL:
-               default:
-                       /*
-                        * Setup initial negotiation values
-                        * and try level 1 DV.
-                        */
-                       ahc_linux_filter_inquiry(ahc, devinfo);
-                       AHC_SET_DV_STATE(ahc, targ, AHC_DV_STATE_INQ_VERIFY);
-                       targ->dv_echo_size = 0;
-                       break;
-               }
-               break;
-
-       case AHC_DV_STATE_WEB:
-               switch (status & SS_MASK) {
-               case SS_NOP:
-                       AHC_SET_DV_STATE(ahc, targ, AHC_DV_STATE_REB);
-                       break;
-               case SS_INQ_REFRESH:
-                       AHC_SET_DV_STATE(ahc, targ,
-                                        AHC_DV_STATE_INQ_SHORT_ASYNC);
-                       break;
-               case SS_RETRY:
-                       AHC_SET_DV_STATE(ahc, targ, targ->dv_state);
-                       if (ahc_cmd_get_transaction_status(cmd)
-                        == CAM_REQUEUE_REQ) {
-                               targ->dv_state_retry--;
-                       } else if ((status & SSQ_FALLBACK) != 0) {
-                               if (ahc_linux_fallback(ahc, devinfo) != 0) {
-                                       AHC_SET_DV_STATE(ahc, targ,
-                                                        AHC_DV_STATE_EXIT);
-                                       break;
-                               }
-                               /*
-                                * Do not count "falling back"
-                                * against our retries.
-                                */
-                               targ->dv_state_retry = 0;
-                       }
-                       if (targ->dv_state_retry <= 10)
-                               break;
-                       /* FALLTHROUGH */
-#ifdef AHC_DEBUG
-                       if (ahc_debug & AHC_SHOW_DV) {
-                               ahc_print_devinfo(ahc, devinfo);
-                               printf("DV WEB reties exhausted\n");
-                       }
-#endif
-               default:
-                       AHC_SET_DV_STATE(ahc, targ, AHC_DV_STATE_EXIT);
-                       break;
-               }
-               break;
-
-       case AHC_DV_STATE_REB:
-               switch (status & SS_MASK) {
-               case SS_NOP:
-                       if (memcmp(targ->dv_buffer, targ->dv_buffer1,
-                                  targ->dv_echo_size) != 0) {
-                               if (ahc_linux_fallback(ahc, devinfo) != 0)
-                                       AHC_SET_DV_STATE(ahc, targ,
-                                                        AHC_DV_STATE_EXIT);
-                               else
-                                       AHC_SET_DV_STATE(ahc, targ,
-                                                        AHC_DV_STATE_WEB);
-                               break;
-                       }
-                       
-                       if (targ->dv_buffer != NULL) {
-                               free(targ->dv_buffer, M_DEVBUF);
-                               targ->dv_buffer = NULL;
-                       }
-                       if (targ->dv_buffer1 != NULL) {
-                               free(targ->dv_buffer1, M_DEVBUF);
-                               targ->dv_buffer1 = NULL;
-                       }
-                       AHC_SET_DV_STATE(ahc, targ, AHC_DV_STATE_EXIT);
-                       break;
-               case SS_INQ_REFRESH:
-                       AHC_SET_DV_STATE(ahc, targ,
-                                        AHC_DV_STATE_INQ_SHORT_ASYNC);
-                       break;
-               case SS_RETRY:
-                       AHC_SET_DV_STATE(ahc, targ, targ->dv_state);
-                       if (ahc_cmd_get_transaction_status(cmd)
-                        == CAM_REQUEUE_REQ) {
-                               targ->dv_state_retry--;
-                       } else if ((status & SSQ_FALLBACK) != 0) {
-                               if (ahc_linux_fallback(ahc, devinfo) != 0) {
-                                       AHC_SET_DV_STATE(ahc, targ,
-                                                        AHC_DV_STATE_EXIT);
-                                       break;
-                               }
-                               AHC_SET_DV_STATE(ahc, targ, AHC_DV_STATE_WEB);
-                       }
-                       if (targ->dv_state_retry <= 10) {
-                               if ((status & (SSQ_DELAY_RANDOM|SSQ_DELAY))!= 0)
-                                       msleep(ahc->our_id*1000/10);
-                               break;
-                       }
-#ifdef AHC_DEBUG
-                       if (ahc_debug & AHC_SHOW_DV) {
-                               ahc_print_devinfo(ahc, devinfo);
-                               printf("DV REB reties exhausted\n");
-                       }
-#endif
-                       /* FALLTHROUGH */
-               default:
-                       AHC_SET_DV_STATE(ahc, targ, AHC_DV_STATE_EXIT);
-                       break;
-               }
-               break;
-
-       case AHC_DV_STATE_SU:
-               switch (status & SS_MASK) {
-               case SS_NOP:
-               case SS_INQ_REFRESH:
-                       AHC_SET_DV_STATE(ahc, targ,
-                                        AHC_DV_STATE_INQ_SHORT_ASYNC);
-                       break;
-               default:
-                       AHC_SET_DV_STATE(ahc, targ, AHC_DV_STATE_EXIT);
-                       break;
-               }
-               break;
-
-       case AHC_DV_STATE_BUSY:
-               switch (status & SS_MASK) {
-               case SS_NOP:
-               case SS_INQ_REFRESH:
-                       AHC_SET_DV_STATE(ahc, targ,
-                                        AHC_DV_STATE_INQ_SHORT_ASYNC);
-                       break;
-               case SS_TUR:
-               case SS_RETRY:
-                       AHC_SET_DV_STATE(ahc, targ, targ->dv_state);
-                       if (ahc_cmd_get_transaction_status(cmd)
-                        == CAM_REQUEUE_REQ) {
-                               targ->dv_state_retry--;
-                       } else if (targ->dv_state_retry < 60) {
-                               if ((status & SSQ_DELAY) != 0)
-                                       ssleep(1);
-                       } else {
-#ifdef AHC_DEBUG
-                               if (ahc_debug & AHC_SHOW_DV) {
-                                       ahc_print_devinfo(ahc, devinfo);
-                                       printf("DV BUSY reties exhausted\n");
-                               }
-#endif
-                               AHC_SET_DV_STATE(ahc, targ, AHC_DV_STATE_EXIT);
-                       }
-                       break;
-               default:
-                       AHC_SET_DV_STATE(ahc, targ, AHC_DV_STATE_EXIT);
-                       break;
-               }
-               break;
-
-       default:
-               printf("%s: Invalid DV completion state %d\n", ahc_name(ahc),
-                      targ->dv_state);
-               AHC_SET_DV_STATE(ahc, targ, AHC_DV_STATE_EXIT);
-               break;
-       }
-}
-
-static void
-ahc_linux_dv_fill_cmd(struct ahc_softc *ahc, struct scsi_cmnd *cmd,
-                     struct ahc_devinfo *devinfo)
-{
-       memset(cmd, 0, sizeof(struct scsi_cmnd));
-       cmd->device = ahc->platform_data->dv_scsi_dev;
-       cmd->scsi_done = ahc_linux_dv_complete;
-}
-
-/*
- * Synthesize an inquiry command.  On the return trip, it'll be
- * sniffed and the device transfer settings set for us.
- */
-static void
-ahc_linux_dv_inq(struct ahc_softc *ahc, struct scsi_cmnd *cmd,
-                struct ahc_devinfo *devinfo, struct ahc_linux_target *targ,
-                u_int request_length)
-{
-
-#ifdef AHC_DEBUG
-       if (ahc_debug & AHC_SHOW_DV) {
-               ahc_print_devinfo(ahc, devinfo);
-               printf("Sending INQ\n");
-       }
-#endif
-       if (targ->inq_data == NULL)
-               targ->inq_data = malloc(AHC_LINUX_DV_INQ_LEN,
-                                       M_DEVBUF, M_WAITOK);
-       if (targ->dv_state > AHC_DV_STATE_INQ_ASYNC) {
-               if (targ->dv_buffer != NULL)
-                       free(targ->dv_buffer, M_DEVBUF);
-               targ->dv_buffer = malloc(AHC_LINUX_DV_INQ_LEN,
-                                        M_DEVBUF, M_WAITOK);
-       }
-
-       ahc_linux_dv_fill_cmd(ahc, cmd, devinfo);
-       cmd->sc_data_direction = SCSI_DATA_READ;
-       cmd->cmd_len = 6;
-       cmd->cmnd[0] = INQUIRY;
-       cmd->cmnd[4] = request_length;
-       cmd->request_bufflen = request_length;
-       if (targ->dv_state > AHC_DV_STATE_INQ_ASYNC)
-               cmd->request_buffer = targ->dv_buffer;
-       else
-               cmd->request_buffer = targ->inq_data;
-       memset(cmd->request_buffer, 0, AHC_LINUX_DV_INQ_LEN);
-}
-
-static void
-ahc_linux_dv_tur(struct ahc_softc *ahc, struct scsi_cmnd *cmd,
-                struct ahc_devinfo *devinfo)
-{
-
-#ifdef AHC_DEBUG
-       if (ahc_debug & AHC_SHOW_DV) {
-               ahc_print_devinfo(ahc, devinfo);
-               printf("Sending TUR\n");
-       }
-#endif
-       /* Do a TUR to clear out any non-fatal transitional state */
-       ahc_linux_dv_fill_cmd(ahc, cmd, devinfo);
-       cmd->sc_data_direction = SCSI_DATA_NONE;
-       cmd->cmd_len = 6;
-       cmd->cmnd[0] = TEST_UNIT_READY;
-}
-
-#define AHC_REBD_LEN 4
-
-static void
-ahc_linux_dv_rebd(struct ahc_softc *ahc, struct scsi_cmnd *cmd,
-                struct ahc_devinfo *devinfo, struct ahc_linux_target *targ)
-{
-
-#ifdef AHC_DEBUG
-       if (ahc_debug & AHC_SHOW_DV) {
-               ahc_print_devinfo(ahc, devinfo);
-               printf("Sending REBD\n");
-       }
-#endif
-       if (targ->dv_buffer != NULL)
-               free(targ->dv_buffer, M_DEVBUF);
-       targ->dv_buffer = malloc(AHC_REBD_LEN, M_DEVBUF, M_WAITOK);
-       ahc_linux_dv_fill_cmd(ahc, cmd, devinfo);
-       cmd->sc_data_direction = SCSI_DATA_READ;
-       cmd->cmd_len = 10;
-       cmd->cmnd[0] = READ_BUFFER;
-       cmd->cmnd[1] = 0x0b;
-       scsi_ulto3b(AHC_REBD_LEN, &cmd->cmnd[6]);
-       cmd->request_bufflen = AHC_REBD_LEN;
-       cmd->underflow = cmd->request_bufflen;
-       cmd->request_buffer = targ->dv_buffer;
-}
-
-static void
-ahc_linux_dv_web(struct ahc_softc *ahc, struct scsi_cmnd *cmd,
-                struct ahc_devinfo *devinfo, struct ahc_linux_target *targ)
-{
-
-#ifdef AHC_DEBUG
-       if (ahc_debug & AHC_SHOW_DV) {
-               ahc_print_devinfo(ahc, devinfo);
-               printf("Sending WEB\n");
-       }
-#endif
-       ahc_linux_dv_fill_cmd(ahc, cmd, devinfo);
-       cmd->sc_data_direction = SCSI_DATA_WRITE;
-       cmd->cmd_len = 10;
-       cmd->cmnd[0] = WRITE_BUFFER;
-       cmd->cmnd[1] = 0x0a;
-       scsi_ulto3b(targ->dv_echo_size, &cmd->cmnd[6]);
-       cmd->request_bufflen = targ->dv_echo_size;
-       cmd->underflow = cmd->request_bufflen;
-       cmd->request_buffer = targ->dv_buffer;
-}
-
-static void
-ahc_linux_dv_reb(struct ahc_softc *ahc, struct scsi_cmnd *cmd,
-                struct ahc_devinfo *devinfo, struct ahc_linux_target *targ)
-{
-
-#ifdef AHC_DEBUG
-       if (ahc_debug & AHC_SHOW_DV) {
-               ahc_print_devinfo(ahc, devinfo);
-               printf("Sending REB\n");
-       }
-#endif
-       ahc_linux_dv_fill_cmd(ahc, cmd, devinfo);
-       cmd->sc_data_direction = SCSI_DATA_READ;
-       cmd->cmd_len = 10;
-       cmd->cmnd[0] = READ_BUFFER;
-       cmd->cmnd[1] = 0x0a;
-       scsi_ulto3b(targ->dv_echo_size, &cmd->cmnd[6]);
-       cmd->request_bufflen = targ->dv_echo_size;
-       cmd->underflow = cmd->request_bufflen;
-       cmd->request_buffer = targ->dv_buffer1;
-}
-
-static void
-ahc_linux_dv_su(struct ahc_softc *ahc, struct scsi_cmnd *cmd,
-               struct ahc_devinfo *devinfo,
-               struct ahc_linux_target *targ)
-{
-       u_int le;
-
-       le = SID_IS_REMOVABLE(targ->inq_data) ? SSS_LOEJ : 0;
-
-#ifdef AHC_DEBUG
-       if (ahc_debug & AHC_SHOW_DV) {
-               ahc_print_devinfo(ahc, devinfo);
-               printf("Sending SU\n");
-       }
-#endif
-       ahc_linux_dv_fill_cmd(ahc, cmd, devinfo);
-       cmd->sc_data_direction = SCSI_DATA_NONE;
-       cmd->cmd_len = 6;
-       cmd->cmnd[0] = START_STOP_UNIT;
-       cmd->cmnd[4] = le | SSS_START;
-}
-
-static int
-ahc_linux_fallback(struct ahc_softc *ahc, struct ahc_devinfo *devinfo)
-{
-       struct  ahc_linux_target *targ;
-       struct  ahc_initiator_tinfo *tinfo;
-       struct  ahc_transinfo *goal;
-       struct  ahc_tmode_tstate *tstate;
-       struct  ahc_syncrate *syncrate;
-       u_long  s;
-       u_int   width;
-       u_int   period;
-       u_int   offset;
-       u_int   ppr_options;
-       u_int   cur_speed;
-       u_int   wide_speed;
-       u_int   narrow_speed;
-       u_int   fallback_speed;
-
-#ifdef AHC_DEBUG
-       if (ahc_debug & AHC_SHOW_DV) {
-               ahc_print_devinfo(ahc, devinfo);
-               printf("Trying to fallback\n");
-       }
-#endif
-       ahc_lock(ahc, &s);
-       targ = ahc->platform_data->targets[devinfo->target_offset];
-       tinfo = ahc_fetch_transinfo(ahc, devinfo->channel,
-                                   devinfo->our_scsiid,
-                                   devinfo->target, &tstate);
-       goal = &tinfo->goal;
-       width = goal->width;
-       period = goal->period;
-       offset = goal->offset;
-       ppr_options = goal->ppr_options;
-       if (offset == 0)
-               period = AHC_ASYNC_XFER_PERIOD;
-       if (targ->dv_next_narrow_period == 0)
-               targ->dv_next_narrow_period = MAX(period, AHC_SYNCRATE_ULTRA2);
-       if (targ->dv_next_wide_period == 0)
-               targ->dv_next_wide_period = period;
-       if (targ->dv_max_width == 0)
-               targ->dv_max_width = width;
-       if (targ->dv_max_ppr_options == 0)
-               targ->dv_max_ppr_options = ppr_options;
-       if (targ->dv_last_ppr_options == 0)
-               targ->dv_last_ppr_options = ppr_options;
-
-       cur_speed = aic_calc_speed(width, period, offset, AHC_SYNCRATE_MIN);
-       wide_speed = aic_calc_speed(MSG_EXT_WDTR_BUS_16_BIT,
-                                         targ->dv_next_wide_period,
-                                         MAX_OFFSET,
-                                         AHC_SYNCRATE_MIN);
-       narrow_speed = aic_calc_speed(MSG_EXT_WDTR_BUS_8_BIT,
-                                           targ->dv_next_narrow_period,
-                                           MAX_OFFSET,
-                                           AHC_SYNCRATE_MIN);
-       fallback_speed = aic_calc_speed(width, period+1, offset,
-                                       AHC_SYNCRATE_MIN);
-#ifdef AHC_DEBUG
-       if (ahc_debug & AHC_SHOW_DV) {
-               printf("cur_speed= %d, wide_speed= %d, narrow_speed= %d, "
-                      "fallback_speed= %d\n", cur_speed, wide_speed,
-                      narrow_speed, fallback_speed);
-       }
-#endif
-
-       if (cur_speed > 160000) {
-               /*
-                * Paced/DT/IU_REQ only transfer speeds.  All we
-                * can do is fallback in terms of syncrate.
-                */
-               period++;
-       } else if (cur_speed > 80000) {
-               if ((ppr_options & MSG_EXT_PPR_IU_REQ) != 0) {
-                       /*
-                        * Try without IU_REQ as it may be confusing
-                        * an expander.
-                        */
-                       ppr_options &= ~MSG_EXT_PPR_IU_REQ;
-               } else {
-                       /*
-                        * Paced/DT only transfer speeds.  All we
-                        * can do is fallback in terms of syncrate.
-                        */
-                       period++;
-                       ppr_options = targ->dv_max_ppr_options;
-               }
-       } else if (cur_speed > 3300) {
-
-               /*
-                * In this range we the following
-                * options ordered from highest to
-                * lowest desireability:
-                *
-                * o Wide/DT
-                * o Wide/non-DT
-                * o Narrow at a potentally higher sync rate.
-                *
-                * All modes are tested with and without IU_REQ
-                * set since using IUs may confuse an expander.
-                */
-               if ((ppr_options & MSG_EXT_PPR_IU_REQ) != 0) {
-
-                       ppr_options &= ~MSG_EXT_PPR_IU_REQ;
-               } else if ((ppr_options & MSG_EXT_PPR_DT_REQ) != 0) {
-                       /*
-                        * Try going non-DT.
-                        */
-                       ppr_options = targ->dv_max_ppr_options;
-                       ppr_options &= ~MSG_EXT_PPR_DT_REQ;
-               } else if (targ->dv_last_ppr_options != 0) {
-                       /*
-                        * Try without QAS or any other PPR options.
-                        * We may need a non-PPR message to work with
-                        * an expander.  We look at the "last PPR options"
-                        * so we will perform this fallback even if the
-                        * target responded to our PPR negotiation with
-                        * no option bits set.
-                        */
-                       ppr_options = 0;
-               } else if (width == MSG_EXT_WDTR_BUS_16_BIT) {
-                       /*
-                        * If the next narrow speed is greater than
-                        * the next wide speed, fallback to narrow.
-                        * Otherwise fallback to the next DT/Wide setting.
-                        * The narrow async speed will always be smaller
-                        * than the wide async speed, so handle this case
-                        * specifically.
-                        */
-                       ppr_options = targ->dv_max_ppr_options;
-                       if (narrow_speed > fallback_speed
-                        || period >= AHC_ASYNC_XFER_PERIOD) {
-                               targ->dv_next_wide_period = period+1;
-                               width = MSG_EXT_WDTR_BUS_8_BIT;
-                               period = targ->dv_next_narrow_period;
-                       } else {
-                               period++;
-                       }
-               } else if ((ahc->features & AHC_WIDE) != 0
-                       && targ->dv_max_width != 0
-                       && wide_speed >= fallback_speed
-                       && (targ->dv_next_wide_period <= AHC_ASYNC_XFER_PERIOD
-                        || period >= AHC_ASYNC_XFER_PERIOD)) {
-
-                       /*
-                        * We are narrow.  Try falling back
-                        * to the next wide speed with 
-                        * all supported ppr options set.
-                        */
-                       targ->dv_next_narrow_period = period+1;
-                       width = MSG_EXT_WDTR_BUS_16_BIT;
-                       period = targ->dv_next_wide_period;
-                       ppr_options = targ->dv_max_ppr_options;
-               } else {
-                       /* Only narrow fallback is allowed. */
-                       period++;
-                       ppr_options = targ->dv_max_ppr_options;
-               }
-       } else {
-               ahc_unlock(ahc, &s);
-               return (-1);
-       }
-       offset = MAX_OFFSET;
-       syncrate = ahc_find_syncrate(ahc, &period, &ppr_options,
-                                    AHC_SYNCRATE_DT);
-       ahc_set_width(ahc, devinfo, width, AHC_TRANS_GOAL, FALSE);
-       if (period == 0) {
-               period = 0;
-               offset = 0;
-               ppr_options = 0;
-               if (width == MSG_EXT_WDTR_BUS_8_BIT)
-                       targ->dv_next_narrow_period = AHC_ASYNC_XFER_PERIOD;
-               else
-                       targ->dv_next_wide_period = AHC_ASYNC_XFER_PERIOD;
-       }
-       ahc_set_syncrate(ahc, devinfo, syncrate, period, offset,
-                        ppr_options, AHC_TRANS_GOAL, FALSE);
-       targ->dv_last_ppr_options = ppr_options;
-       ahc_unlock(ahc, &s);
-       return (0);
-}
-
-static void
-ahc_linux_dv_timeout(struct scsi_cmnd *cmd)
-{
-       struct  ahc_softc *ahc;
-       struct  scb *scb;
-       u_long  flags;
-
-       ahc = *((struct ahc_softc **)cmd->device->host->hostdata);
-       ahc_lock(ahc, &flags);
-
-#ifdef AHC_DEBUG
-       if (ahc_debug & AHC_SHOW_DV) {
-               printf("%s: Timeout while doing DV command %x.\n",
-                      ahc_name(ahc), cmd->cmnd[0]);
-               ahc_dump_card_state(ahc);
-       }
-#endif
-       
-       /*
-        * Guard against "done race".  No action is
-        * required if we just completed.
-        */
-       if ((scb = (struct scb *)cmd->host_scribble) == NULL) {
-               ahc_unlock(ahc, &flags);
-               return;
-       }
-
-       /*
-        * Command has not completed.  Mark this
-        * SCB as having failing status prior to
-        * resetting the bus, so we get the correct
-        * error code.
-        */
-       if ((scb->flags & SCB_SENSE) != 0)
-               ahc_set_transaction_status(scb, CAM_AUTOSENSE_FAIL);
-       else
-               ahc_set_transaction_status(scb, CAM_CMD_TIMEOUT);
-       ahc_reset_channel(ahc, cmd->device->channel + 'A', /*initiate*/TRUE);
-
-       /*
-        * Add a minimal bus settle delay for devices that are slow to
-        * respond after bus resets.
-        */
-       ahc_linux_freeze_simq(ahc);
-       init_timer(&ahc->platform_data->reset_timer);
-       ahc->platform_data->reset_timer.data = (u_long)ahc;
-       ahc->platform_data->reset_timer.expires = jiffies + HZ / 2;
-       ahc->platform_data->reset_timer.function =
-           (ahc_linux_callback_t *)ahc_linux_release_simq;
-       add_timer(&ahc->platform_data->reset_timer);
-       if (ahc_linux_next_device_to_run(ahc) != NULL)
-               ahc_schedule_runq(ahc);
-       ahc_linux_run_complete_queue(ahc);
-       ahc_unlock(ahc, &flags);
-}
-
-static void
-ahc_linux_dv_complete(struct scsi_cmnd *cmd)
-{
-       struct ahc_softc *ahc;
-
-       ahc = *((struct ahc_softc **)cmd->device->host->hostdata);
-
-       /* Delete the DV timer before it goes off! */
-       scsi_delete_timer(cmd);
-
-#ifdef AHC_DEBUG
-       if (ahc_debug & AHC_SHOW_DV)
-               printf("%s:%d:%d: Command completed, status= 0x%x\n",
-                      ahc_name(ahc), cmd->device->channel,
-                      cmd->device->id, cmd->result);
-#endif
-
-       /* Wake up the state machine */
-       up(&ahc->platform_data->dv_cmd_sem);
-}
-
-static void
-ahc_linux_generate_dv_pattern(struct ahc_linux_target *targ)
-{
-       uint16_t b;
-       u_int    i;
-       u_int    j;
-
-       if (targ->dv_buffer != NULL)
-               free(targ->dv_buffer, M_DEVBUF);
-       targ->dv_buffer = malloc(targ->dv_echo_size, M_DEVBUF, M_WAITOK);
-       if (targ->dv_buffer1 != NULL)
-               free(targ->dv_buffer1, M_DEVBUF);
-       targ->dv_buffer1 = malloc(targ->dv_echo_size, M_DEVBUF, M_WAITOK);
-
-       i = 0;
-       b = 0x0001;
-       for (j = 0 ; i < targ->dv_echo_size; j++) {
-               if (j < 32) {
-                       /*
-                        * 32bytes of sequential numbers.
-                        */
-                       targ->dv_buffer[i++] = j & 0xff;
-               } else if (j < 48) {
-                       /*
-                        * 32bytes of repeating 0x0000, 0xffff.
-                        */
-                       targ->dv_buffer[i++] = (j & 0x02) ? 0xff : 0x00;
-               } else if (j < 64) {
-                       /*
-                        * 32bytes of repeating 0x5555, 0xaaaa.
-                        */
-                       targ->dv_buffer[i++] = (j & 0x02) ? 0xaa : 0x55;
-               } else {
-                       /*
-                        * Remaining buffer is filled with a repeating
-                        * patter of:
-                        *
-                        *       0xffff
-                        *      ~0x0001 << shifted once in each loop.
-                        */
-                       if (j & 0x02) {
-                               if (j & 0x01) {
-                                       targ->dv_buffer[i++] = ~(b >> 8) & 0xff;
-                                       b <<= 1;
-                                       if (b == 0x0000)
-                                               b = 0x0001;
-                               } else {
-                                       targ->dv_buffer[i++] = (~b & 0xff);
-                               }
-                       } else {
-                               targ->dv_buffer[i++] = 0xff;
-                       }
-               }
-       }
-}
-
 static u_int
 ahc_linux_user_tagdepth(struct ahc_softc *ahc, struct ahc_devinfo *devinfo)
 {
@@ -3482,48 +2016,6 @@
        return (tags);
 }
 
-static u_int
-ahc_linux_user_dv_setting(struct ahc_softc *ahc)
-{
-       static int warned_user;
-       int dv;
-
-       if (ahc->unit >= NUM_ELEMENTS(aic7xxx_dv_settings)) {
-               if (warned_user == 0) {
-
-                       printf(KERN_WARNING
-"aic7xxx: WARNING: Insufficient dv settings instances\n"
-"aic7xxx: for installed controllers. Using defaults\n"
-"aic7xxx: Please update the aic7xxx_dv_settings array\n"
-"aic7xxx: in the aic7xxx_osm.c source file.\n");
-                       warned_user++;
-               }
-               dv = -1;
-       } else {
-
-               dv = aic7xxx_dv_settings[ahc->unit];
-       }
-
-       if (dv < 0) {
-               u_long s;
-
-               /*
-                * Apply the default.
-                */
-               /*
-                * XXX - Enable DV on non-U160 controllers once it
-                *       has been tested there.
-                */
-               ahc_lock(ahc, &s);
-               dv = (ahc->features & AHC_DT);
-               if (ahc->seep_config != 0
-                && ahc->seep_config->signature >= CFSIGNATURE2)
-                       dv = (ahc->seep_config->adapter_control & CFENABLEDV);
-               ahc_unlock(ahc, &s);
-       }
-       return (dv);
-}
-
 /*
  * Determines the queue depth for a given device.
  */
@@ -3574,8 +2066,7 @@
                 * Schedule us to run later.  The only reason we are not
                 * running is because the whole controller Q is frozen.
                 */
-               if (ahc->platform_data->qfrozen != 0
-                && AHC_DV_SIMQ_FROZEN(ahc) == 0) {
+               if (ahc->platform_data->qfrozen != 0) {
                        TAILQ_INSERT_TAIL(&ahc->platform_data->device_runq,
                                          dev, links);
                        dev->flags |= AHC_DEV_ON_RUN_LIST;
@@ -3616,9 +2107,6 @@
                if ((ahc->user_discenable & mask) != 0)
                        hscb->control |= DISCENB;
 
-               if (AHC_DV_CMD(cmd) != 0)
-                       scb->flags |= SCB_SILENT;
-
                if ((tstate->auto_negotiate & mask) != 0) {
                        scb->flags |= SCB_AUTO_NEGOTIATE;
                        scb->hscb->control |= MK_MESSAGE;
@@ -3811,7 +2299,6 @@
        targ->channel = channel;
        targ->target = target;
        targ->ahc = ahc;
-       targ->flags = AHC_DV_REQUIRED;
        ahc->platform_data->targets[target_offset] = targ;
        return (targ);
 }
@@ -3850,10 +2337,6 @@
        ahc->platform_data->targets[target_offset] = NULL;
        if (targ->inq_data != NULL)
                free(targ->inq_data, M_DEVBUF);
-       if (targ->dv_buffer != NULL)
-               free(targ->dv_buffer, M_DEVBUF);
-       if (targ->dv_buffer1 != NULL)
-               free(targ->dv_buffer1, M_DEVBUF);
        free(targ, M_DEVBUF);
 }
 
@@ -3900,8 +2383,7 @@
        targ->devices[dev->lun] = NULL;
        free(dev, M_DEVBUF);
        targ->refcount--;
-       if (targ->refcount == 0
-        && (targ->flags & AHC_DV_REQUIRED) == 0)
+       if (targ->refcount == 0)
                ahc_linux_free_target(ahc, targ);
 }
 
@@ -4105,16 +2587,7 @@
                ahc_linux_handle_scsi_status(ahc, dev, scb);
        } else if (ahc_get_transaction_status(scb) == CAM_SEL_TIMEOUT) {
                dev->flags |= AHC_DEV_UNCONFIGURED;
-               if (AHC_DV_CMD(cmd) == FALSE)
-                       dev->target->flags &= ~AHC_DV_REQUIRED;
        }
-       /*
-        * Start DV for devices that require it assuming the first command
-        * sent does not result in a selection timeout.
-        */
-       if (ahc_get_transaction_status(scb) != CAM_SEL_TIMEOUT
-        && (dev->target->flags & AHC_DV_REQUIRED) != 0)
-               ahc_linux_start_dv(ahc);
 
        if (dev->openings == 1
         && ahc_get_transaction_status(scb) == CAM_REQ_CMP
@@ -4158,13 +2631,6 @@
 
        ahc_free_scb(ahc, scb);
        ahc_linux_queue_cmd_complete(ahc, cmd);
-
-       if ((ahc->platform_data->flags & AHC_DV_WAIT_SIMQ_EMPTY) != 0
-        && LIST_FIRST(&ahc->pending_scbs) == NULL) {
-               ahc->platform_data->flags &= ~AHC_DV_WAIT_SIMQ_EMPTY;
-               up(&ahc->platform_data->dv_sem);
-       }
-               
 }
 
 static void
@@ -4341,7 +2807,7 @@
         * full error information available when making
         * state change decisions.
         */
-       if (AHC_DV_CMD(cmd) == FALSE) {
+       {
                u_int new_status;
 
                switch (ahc_cmd_get_transaction_status(cmd)) {
@@ -4432,115 +2898,6 @@
 }
 
 static void
-ahc_linux_filter_inquiry(struct ahc_softc *ahc, struct ahc_devinfo *devinfo)
-{
-       struct  scsi_inquiry_data *sid;
-       struct  ahc_initiator_tinfo *tinfo;
-       struct  ahc_transinfo *user;
-       struct  ahc_transinfo *goal;
-       struct  ahc_transinfo *curr;
-       struct  ahc_tmode_tstate *tstate;
-       struct  ahc_syncrate *syncrate;
-       struct  ahc_linux_device *dev;
-       u_int   maxsync;
-       u_int   width;
-       u_int   period;
-       u_int   offset;
-       u_int   ppr_options;
-       u_int   trans_version;
-       u_int   prot_version;
-
-       /*
-        * Determine if this lun actually exists.  If so,
-        * hold on to its corresponding device structure.
-        * If not, make sure we release the device and
-        * don't bother processing the rest of this inquiry
-        * command.
-        */
-       dev = ahc_linux_get_device(ahc, devinfo->channel - 'A',
-                                  devinfo->target, devinfo->lun,
-                                  /*alloc*/TRUE);
-
-       sid = (struct scsi_inquiry_data *)dev->target->inq_data;
-       if (SID_QUAL(sid) == SID_QUAL_LU_CONNECTED) {
-
-               dev->flags &= ~AHC_DEV_UNCONFIGURED;
-       } else {
-               dev->flags |= AHC_DEV_UNCONFIGURED;
-               return;
-       }
-
-       /*
-        * Update our notion of this device's transfer
-        * negotiation capabilities.
-        */
-       tinfo = ahc_fetch_transinfo(ahc, devinfo->channel,
-                                   devinfo->our_scsiid,
-                                   devinfo->target, &tstate);
-       user = &tinfo->user;
-       goal = &tinfo->goal;
-       curr = &tinfo->curr;
-       width = user->width;
-       period = user->period;
-       offset = user->offset;
-       ppr_options = user->ppr_options;
-       trans_version = user->transport_version;
-       prot_version = MIN(user->protocol_version, SID_ANSI_REV(sid));
-
-       /*
-        * Only attempt SPI3/4 once we've verified that
-        * the device claims to support SPI3/4 features.
-        */
-       if (prot_version < SCSI_REV_2)
-               trans_version = SID_ANSI_REV(sid);
-       else
-               trans_version = SCSI_REV_2;
-
-       if ((sid->flags & SID_WBus16) == 0)
-               width = MSG_EXT_WDTR_BUS_8_BIT;
-       if ((sid->flags & SID_Sync) == 0) {
-               period = 0;
-               offset = 0;
-               ppr_options = 0;
-       }
-       if ((sid->spi3data & SID_SPI_QAS) == 0)
-               ppr_options &= ~MSG_EXT_PPR_QAS_REQ;
-       if ((sid->spi3data & SID_SPI_CLOCK_DT) == 0)
-               ppr_options &= MSG_EXT_PPR_QAS_REQ;
-       if ((sid->spi3data & SID_SPI_IUS) == 0)
-               ppr_options &= (MSG_EXT_PPR_DT_REQ
-                             | MSG_EXT_PPR_QAS_REQ);
-
-       if (prot_version > SCSI_REV_2
-        && ppr_options != 0)
-               trans_version = user->transport_version;
-
-       ahc_validate_width(ahc, /*tinfo limit*/NULL, &width, ROLE_UNKNOWN);
-       if ((ahc->features & AHC_ULTRA2) != 0)
-               maxsync = AHC_SYNCRATE_DT;
-       else if ((ahc->features & AHC_ULTRA) != 0)
-               maxsync = AHC_SYNCRATE_ULTRA;
-       else
-               maxsync = AHC_SYNCRATE_FAST;
-
-       syncrate = ahc_find_syncrate(ahc, &period, &ppr_options, maxsync);
-       ahc_validate_offset(ahc, /*tinfo limit*/NULL, syncrate,
-                           &offset, width, ROLE_UNKNOWN);
-       if (offset == 0 || period == 0) {
-               period = 0;
-               offset = 0;
-               ppr_options = 0;
-       }
-       /* Apply our filtered user settings. */
-       curr->transport_version = trans_version;
-       curr->protocol_version = prot_version;
-       ahc_set_width(ahc, devinfo, width, AHC_TRANS_GOAL, /*paused*/FALSE);
-       ahc_set_syncrate(ahc, devinfo, syncrate, period,
-                        offset, ppr_options, AHC_TRANS_GOAL,
-                        /*paused*/FALSE);
-}
-
-static void
 ahc_linux_sem_timeout(u_long arg)
 {
        struct  ahc_softc *ahc;
@@ -4585,11 +2942,6 @@
                ahc->platform_data->qfrozen--;
        if (ahc->platform_data->qfrozen == 0)
                unblock_reqs = 1;
-       if (AHC_DV_SIMQ_FROZEN(ahc)
-        && ((ahc->platform_data->flags & AHC_DV_WAIT_SIMQ_RELEASE) != 0)) {
-               ahc->platform_data->flags &= ~AHC_DV_WAIT_SIMQ_RELEASE;
-               up(&ahc->platform_data->dv_sem);
-       }
        ahc_schedule_runq(ahc);
        ahc_unlock(ahc, &s);
        /*
@@ -5274,19 +3626,6 @@
 static void
 ahc_linux_exit(void)
 {
-       struct ahc_softc *ahc;
-
-       /*
-        * Shutdown DV threads before going into the SCSI mid-layer.
-        * This avoids situations where the mid-layer locks the entire
-        * kernel so that waiting for our DV threads to exit leads
-        * to deadlock.
-        */
-       TAILQ_FOREACH(ahc, &ahc_tailq, links) {
-
-               ahc_linux_kill_dv_thread(ahc);
-       }
-
 #if LINUX_VERSION_CODE < KERNEL_VERSION(2,5,0)
        /*
         * In 2.4 we have to unregister from the PCI core _after_
===== drivers/scsi/aic7xxx/aic7xxx_osm.h 1.59 vs edited =====
--- 1.59/drivers/scsi/aic7xxx/aic7xxx_osm.h     2005-01-10 00:47:25 -06:00
+++ edited/drivers/scsi/aic7xxx/aic7xxx_osm.h   2005-04-11 13:35:57 -05:00
@@ -424,27 +424,9 @@
 };
 
 typedef enum {
-       AHC_DV_REQUIRED          = 0x01,
        AHC_INQ_VALID            = 0x02,
-       AHC_BASIC_DV             = 0x04,
-       AHC_ENHANCED_DV          = 0x08
 } ahc_linux_targ_flags;
 
-/* DV States */
-typedef enum {
-       AHC_DV_STATE_EXIT = 0,
-       AHC_DV_STATE_INQ_SHORT_ASYNC,
-       AHC_DV_STATE_INQ_ASYNC,
-       AHC_DV_STATE_INQ_ASYNC_VERIFY,
-       AHC_DV_STATE_TUR,
-       AHC_DV_STATE_REBD,
-       AHC_DV_STATE_INQ_VERIFY,
-       AHC_DV_STATE_WEB,
-       AHC_DV_STATE_REB,
-       AHC_DV_STATE_SU,
-       AHC_DV_STATE_BUSY
-} ahc_dv_state;
-
 struct ahc_linux_target {
        struct ahc_linux_device  *devices[AHC_NUM_LUNS];
        int                       channel;
@@ -454,19 +436,6 @@
        struct ahc_softc         *ahc;
        ahc_linux_targ_flags      flags;
        struct scsi_inquiry_data *inq_data;
-       /*
-        * The next "fallback" period to use for narrow/wide transfers.
-        */
-       uint8_t                   dv_next_narrow_period;
-       uint8_t                   dv_next_wide_period;
-       uint8_t                   dv_max_width;
-       uint8_t                   dv_max_ppr_options;
-       uint8_t                   dv_last_ppr_options;
-       u_int                     dv_echo_size;
-       ahc_dv_state              dv_state;
-       u_int                     dv_state_retry;
-       char                     *dv_buffer;
-       char                     *dv_buffer1;
 };
 
 /********************* Definitions Required by the Core 
***********************/
@@ -511,10 +480,6 @@
  * this driver.
  */
 typedef enum {
-       AHC_DV_WAIT_SIMQ_EMPTY   = 0x01,
-       AHC_DV_WAIT_SIMQ_RELEASE = 0x02,
-       AHC_DV_ACTIVE            = 0x04,
-       AHC_DV_SHUTDOWN          = 0x08,
        AHC_RUN_CMPLT_Q_TIMER    = 0x10
 } ahc_linux_softc_flags;
 
@@ -937,11 +902,6 @@
 #endif
 
 /*************************** Domain Validation 
********************************/
-#define AHC_DV_CMD(cmd) ((cmd)->scsi_done == ahc_linux_dv_complete)
-#define AHC_DV_SIMQ_FROZEN(ahc)                                        \
-       ((((ahc)->platform_data->flags & AHC_DV_ACTIVE) != 0)   \
-        && (ahc)->platform_data->qfrozen == 1)
-
 /*********************** Transaction Access Wrappers *************************/
 static __inline void ahc_cmd_set_transaction_status(Scsi_Cmnd *, uint32_t);
 static __inline void ahc_set_transaction_status(struct scb *, uint32_t);


-
To unsubscribe from this list: send the line "unsubscribe linux-scsi" in
the body of a message to [EMAIL PROTECTED]
More majordomo info at  http://vger.kernel.org/majordomo-info.html

Reply via email to