My late client made his last will and testament in your favour, i sent
letters to you but got no response, i advise you contact me
immediately.
Barr Mark Freedman
--
To unsubscribe from this list: send the line unsubscribe linux-scsi in
the body of a message to majord...@vger.kernel.org
More
Hello,
On Sat, Jan 11, 2014 at 07:58:04PM -0800, Loc Ho wrote:
The flush has to occurred immediately after reading the CI
register. It can not wrap around the isr routine and issue the flush
after or before the library ahci isr routine.
I see. So, you're saying that if PMP support is
On 1/10/2014 10:46 PM, Martin K. Petersen wrote:
Andy == Andy Grover agro...@redhat.com writes:
Andy Yes, don't you need FORMAT UNIT because protection information is
Andy going to mean the pi-enabled lun will need to report less blocks?
Modern disk drives won't shrink when you reformat them
SNIP
I wander how we can skip sbc_dif_verify_ if the transport already
offloaded DIF verify.
I think that the transport should signal the core layer that it is able
to offload DIF (ADD/STRIP/PASS/VERIFY), in which case the core should
turn off the backstore DIF verify emulation to sustain
On 1/10/2014 9:04 AM, Nicholas A. Bellinger wrote:
On Thu, 2014-01-09 at 16:58 +0200, Sagi Grimberg wrote:
On 1/8/2014 10:36 PM, Nicholas A. Bellinger wrote:
From: Nicholas Bellinger n...@linux-iscsi.org
This patch adds sbc_check_prot() for performing various DIF
related CDB sanity checks,
On 1/10/2014 10:39 PM, Martin K. Petersen wrote:
Sagi == Sagi Grimberg sa...@mellanox.com writes:
Sagi What about FORMAT_UNIT emulation? The backstore protection
Sagi configuration is done at the target side via configfs/targetcli,
I don't know of any non-disk devices that actually implement
On 1/10/2014 9:00 AM, Nicholas A. Bellinger wrote:
On Thu, 2014-01-09 at 13:01 +0200, Sagi Grimberg wrote:
On 1/8/2014 10:36 PM, Nicholas A. Bellinger wrote:
From: Nicholas Bellinger n...@linux-iscsi.org
This patch adds support for exposing DIF protection device
attributes via configfs. This
On 1/10/2014 10:39 PM, Martin K. Petersen wrote:
Sagi == Sagi Grimberg sa...@mellanox.com writes:
Sagi What about FORMAT_UNIT emulation? The backstore protection
Sagi configuration is done at the target side via configfs/targetcli,
I don't know of any non-disk devices that actually implement
SNIP
nab This patch adds support for exposing DIF protection device
nab attributes via configfs. This includes:
nabpi_prot_type: Protection Type (0, 1, 3 currently support)
nabpi_prot_version: Protection Version (DIF v1 currently supported)
What's DIF v2?
nabpi_guard_type: Guard
Sagi == Sagi Grimberg sa...@dev.mellanox.co.il writes:
I don't know of any non-disk devices that actually implement FORMAT
UNIT. Usually such configuration is done using the array management
interface.
Sagi So this takes me to a corner I still don't understand, if a LUN is
Sagi pre-formatted
On 1/11/2014 11:09 PM, Or Gerlitz wrote:
On Thu, Jan 9, 2014 at 6:40 PM, Sagi Grimberg sa...@mellanox.com wrote:
@@ -557,8 +629,14 @@ isert_connect_request(struct rdma_cm_id *cma_id, struct
rdma_cm_event *event)
goto out_mr;
}
+ if (pi_support
Sagi == Sagi Grimberg sa...@dev.mellanox.co.il writes:
The IP checksum is only supported by DIX between OS and initiator,
not by the target. I guess we could signal to the initiator via a
vendor-private VPD that IP checksum is supported directly. But now
what we have hardware-accelerated T10
On 1/12/2014 2:33 PM, Martin K. Petersen wrote:
Sagi == Sagi Grimberg sa...@dev.mellanox.co.il writes:
I don't know of any non-disk devices that actually implement FORMAT
UNIT. Usually such configuration is done using the array management
interface.
Sagi So this takes me to a corner I still
On 12/01/2014 14:41, Sagi Grimberg wrote:
--- a/drivers/infiniband/ulp/isert/ib_isert.h
+++ b/drivers/infiniband/ulp/isert/ib_isert.h
@@ -48,11 +48,21 @@ struct iser_tx_desc {
struct ib_send_wr send_wr;
} __packed;
+struct pi_context {
+ struct ib_mr *prot_mr;
Doug == Douglas Gilbert dgilb...@interlog.com writes:
So this takes me to a corner I still don't understand, if a LUN is
pre-formatted as T10-protected, what happens to unwritten blocks
read? I mean, SCSI login executes some reads from sevel LBAs which
will probably fail as blocks are
On 14-01-12 12:21 PM, Martin K. Petersen wrote:
Doug == Douglas Gilbert dgilb...@interlog.com writes:
So this takes me to a corner I still don't understand, if a LUN is
pre-formatted as T10-protected, what happens to unwritten blocks
read? I mean, SCSI login executes some reads from sevel
When an MBX command timeout happens,the resources associated with
the MBX command were freed. If FW were to give the response to
host after the timeout value set by driver then driver crashes as the MBX Cmd
resources were already freed.
This patch fixes this issue by maintaing a state flag
The 100Mbps port speed macro used was not proper.
Signed-off-by: John Soni Jose sony.joh...@emulex.com
Signed-off-by: Jayamohan Kallickal jayamohan.kallic...@emulex.com
---
drivers/scsi/be2iscsi/be_iscsi.c |2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git
This patchset updates be2iscsi driver to 10.2.84.0
and contains the following patches based of scsi.git
for-next-base
`
PATCH 0001 - Fix handling MBX completion time out
PATCH 0002 - Fix typo in port speed
PATCH 0003 - Fix IRQ Affinity Support in driver
PATCH 0004 - Fix updating
Signed-off-by: John Soni Jose sony.joh...@emulex.com
Signed-off-by: Jayamohan Kallickal jayamohan.kallic...@emulex.com
---
drivers/scsi/be2iscsi/be_main.h |2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/drivers/scsi/be2iscsi/be_main.h b/drivers/scsi/be2iscsi/be_main.h
index
In iSCSI Boot scenario, when machine is reboot/shutdown phase
the active sessions are not closed. Driver queue cleanup is
done as part of unload and device is disabled.
Sessions are still active, iSCSI commands are issued from
session which comes to driver, as driver cleanup and device
Statistics counters which are added is
- NOP IN/OUT counters
- Login PDU counters
- Text PDU counters
- Logout PDU counters
- ASYNC_PDU counters
- Reject PDU counters
- Digest Error counters
Signed-off-by: John Soni Jose sony.joh...@emulex.com
Signed-off-by: Jayamohan Kallickal
The doorbel format has been updated to support additonal functionalities
of SKH-R adapter. These changes are made such that older FW also works fine.
Signed-off-by: John Soni Jose sony.joh...@emulex.com
Signed-off-by: Jayamohan Kallickal jayamohan.kallic...@emulex.com
---
Provides IRQ_Affinity setting for the driver. Enabling IRQ_Affinity
is through module params. Default IRQ_AFFINITY support is OFF.
Signed-off-by: John Soni Jose sony.joh...@emulex.com
Signed-off-by: Jayamohan Kallickal jayamohan.kallic...@emulex.com
---
drivers/scsi/be2iscsi/be_cmds.h |
Hi,
On Sat, Jan 11, 2014 at 07:58:04PM -0800, Loc Ho wrote:
The flush has to occurred immediately after reading the CI
register. It can not wrap around the isr routine and issue the flush
after or before the library ahci isr routine.
I see. So, you're saying that if PMP support is disabled
25 matches
Mail list logo