If the ALL bit is set in the ZBC_OUT command, the command zone ID field
(block) should be ignored.
Reported-by: David Butterfield
Signed-off-by: Damien Le Moal
---
drivers/ata/libata-scsi.c | 11 ---
1 file changed, 8 insertions(+), 3 deletions(-)
diff --git a/drivers/ata/libata-scsi.c b/drivers/ata/libata-scsi.c
index a5543751f446..aad1b01447de 100644
--- a/drivers/ata/libata-scsi.c
+++ b/drivers/ata/libata-scsi.c
@@ -3805,7 +3805,14 @@ static unsigned int ata_scsi_zbc_out_xlat(struct
ata_queued_cmd *qc)
*/
goto invalid_param_len;
}
- if (block >= dev->n_sectors) {
+
+ all = cdb[14] & 0x1;
+ if (all) {
+ /*
+* Ignore the block address (zone ID) as defined by ZBC.
+*/
+ block = 0;
+ } else if (block >= dev->n_sectors) {
/*
* Block must be a valid zone ID (a zone start LBA).
*/
@@ -3813,8 +3820,6 @@ static unsigned int ata_scsi_zbc_out_xlat(struct
ata_queued_cmd *qc)
goto invalid_fld;
}
- all = cdb[14] & 0x1;
-
if (ata_ncq_enabled(qc->dev) &&
ata_fpdma_zac_mgmt_out_supported(qc->dev)) {
tf->protocol = ATA_PROT_NCQ_NODATA;
--
2.17.1