OK, looks like I found workaround-
iscsi target have to map at least one lun for host, before it login.
Otherwise I have low read performance and sometimes host doesn't recognize
snapshot's lun without logoff/logon.
Don't know is it HPE MSA or linux bug..
17.10.2016 09:46, Dmitry Melekhov пишет:
Hello!
We have two HPE MSA 2040 storages , so I'd like to do some volumes
backups from one storage to another.
Unfortunately, we have no replication license, so I decided to do this
by using snapshots and dd :-)
What I'm doing:
1. creating snapshot on MSA;
2. maps it to host on MSA;
3. iscsiadm -m session --rescan
4. /usr/bin/rescan-scsi-bus.sh --forcerescan -f
then use mpath device, then
5. unmap in MSA;
6. remove snapshot;
7. /usr/bin/rescan-scsi-bus.sh --forcerescan -f
8. sometimes for some reason mpatha is in use, so
dmsetup -f remove mpatha
9. I want every new snapshot be mpatha, so I remove info from multipath:
systemctl stop multipathd
rm -f /etc/multipath/*
systemctl start multipathd
other luns, on another system has names in multipath.conf.
Everything looks fine, but problem here is that at first run after
reboot read performance is twice higher:
after reboot:
603 MB/s and 200Gb volume dd time is 10 minutes,
second and any other run:
191 MB/s and 20-25 minutes run
These are outputs from
dd bs=8M if=/dev/mapper/mpatha of=/dev/null status=progress
This is not only for mpatha, but for any drive in it:
mpatha (3600c0ff000267d5338e5005801000000) dm-4 HP ,MSA 2040 SAN
size=200G features='1 queue_if_no_path' hwhandler='0' wp=rw
|-+- policy='round-robin 0' prio=50 status=active
| |- 2:0:0:0 sdq 65:0 active ready running
| `- 4:0:0:0 sds 65:32 active ready running
`-+- policy='round-robin 0' prio=10 status=enabled
|- 3:0:0:0 sdr 65:16 active ready running
`- 5:0:0:0 sdt 65:48 active ready running
I tested sdq and sds.
Btw, these names are always the same, i.e. after creating new
snapshot, rescan, etc, every drive has the same name.
I I create another snapshot, i.e have 2 mapped snapshots in system -
result is the same, i.e. if first snapshot was removed,
rescanned, and added again it is slow, but second one is OK, until
recreation.
Other luns, from another system, which are never disconnects, has no
such problem.
I tried to do iscsi logoff/logon, but no change....
I even tried to install kernel-ml from el-repo , i.e. 4.8 , but it
gives me the same result...
Just because reboot solves this problem I guess something is wrong in
scsi subsystem...
Thank you!
--
To unsubscribe from this list: send the line "unsubscribe linux-scsi" in
the body of a message to majord...@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
