As the subject states this series is an attempt to harmonize the xHCI,
EHCI, OHCI and DWC USB3 DT nodes with the DT schema introduced in the
framework of the patchset [1].
Firstly as Krzysztof suggested we've deprecated a support of DWC USB3
controllers with "synopsys,"-vendor prefix compatible
In accordance with the Generic EHCI/OHCI bindings the corresponding node
name is suppose to comply with the Generic USB HCD DT schema, which
requires the USB nodes to have the name acceptable by the regexp:
"^usb(@.*)?" . Make sure the "generic-ehci" and "generic-ohci"-compatible
nodes are
Amlogic G12A USB DT sub-nodes are supposed to be compatible with the
generic DWC USB2 and USB3 devices. Since now we've got DT schemas for
both of the later IP cores let's make sure that the Amlogic G12A USB
DT nodes are fully evaluated including the DWC sub-nodes.
Signed-off-by: Serge Semin
Intel Keem Bay DWC3 compatible DT nodes are supposed to have a DWC USB3
compatible sub-node to describe a fully functioning USB interface. Let's
use the available DWC USB3 DT schema to validate the Intel Keem Bay DWC3
sub-nodes.
Note since the generic DWC USB3 DT node is supposed to be named as
An empty snps,quirk-frame-length-adjustment won't cause any change
performed by the driver. Moreover the DT schema validation will fail,
since it expects the property being assigned with some value. So set
fix the example by setting a valid FL-adj value in accordance with
Neil Armstrong comment.
TI Keystone DWC3 compatible DT node is supposed to have a DWC USB3
compatible sub-node to describe a fully functioning USB interface.
Since DWC USB3 has now got a DT schema describing its DT node, let's make
sure the TI Keystone DWC3 sub-node passes validation against it.
Signed-off-by: Serge
Qualcomm msm8996/sc7180/sdm845 DWC3 compatible DT nodes are supposed to
have a DWC USB3 compatible sub-node to describe a fully functioning USB
interface. Let's use the available DWC USB3 DT schema to validate the
Qualcomm DWC3 sub-nodes.
Note since the generic DWC USB3 DT node is supposed to be
The host controller device might be designed to work for the particular
products or applications. In that case its DT node is supposed to be
equipped with the tpl-support property.
Signed-off-by: Serge Semin
Reviewed-by: Rob Herring
---
Changelog v2:
- Grammar fix: "s/it'/its"
- Discard '|'
In accordance with the driver comments the PIPE3 de-emphasis can be tuned
to be either -6dB, -2.5dB or disabled. Let's add the de-emphasis
property constraints so the DT schema would make sure the controller DT
node is equipped with correct value.
Signed-off-by: Serge Semin
Reviewed-by: Rob
Even though the Generic PHY framework is the more preferable way of
setting the USB PHY up, there are still many dts-files and DT bindings
which rely on having the legacy "usb-phy" specified to attach particular
USB PHYs to USB cores. Let's have the "usb-phy" property described in
the generic USB
In accordance with the IP core databook the
snps,quirk-frame-length-adjustment property can be set within [0, 0x3F].
Let's make sure the DT schema applies a correct constraints on the
property.
Signed-off-by: Serge Semin
Reviewed-by: Rob Herring
---
The DWC USB3 driver and some DTS files like Exynos 5250, Keystone k2e, etc
expects the DWC USB3 DT node to have the compatible string with the
"synopsys" vendor prefix. Let's add the corresponding compatible string to
the controller DT schema, but mark it as deprecated seeing the Synopsys,
Inc. is
DWC USB3 DT node is supposed to be compliant with the Generic xHCI
Controller schema, but with additional vendor-specific properties, the
controller-specific reference clocks and PHYs. So let's convert the
currently available legacy text-based DWC USB3 bindings to the DT schema
and make sure the
The controller driver supports two types of DWC USB3 devices: with a
common interrupt lane and with individual interrupts for each mode. Add
support for both these cases to the DWC USB3 DT schema.
Signed-off-by: Serge Semin
Reviewed-by: Rob Herring
---
Changelog v2:
- Grammar fix: "s/both of
Currently the DT bindings of Generic xHCI Controllers are described by
means of the legacy text file. Since such format is deprecated in favor of
the DT schema, let's convert the Generic xHCI Controllers bindings file to
the corresponding yaml files. There will be two of them: a DT schema for
the
The generic USB properties have been described in the legacy bindings
text file: Documentation/devicetree/bindings/usb/generic.txt . Let's
convert its content into the generic USB, USB HCD and USB DRD DT
schemas. So the Generic USB schema will be applicable to all USB
controllers, USB HCD - for
For some reason the "brcm,xhci-brcm-v2" compatible string has been missing
in the original bindings file. Add it to the Generic xHCI Controllers DT
schema since the controller driver expects it to be supported.
Signed-off-by: Serge Semin
Acked-by: Florian Fainelli
Reviewed-by: Rob Herring
---
There can be three distinctive types of the USB controllers: USB hosts,
USB peripherals/gadgets and USB OTG, which can switch from one role to
another. In order to have that hierarchy handled in the DT binding files,
we need to collect common properties in a common DT schema and specific
With minor peculiarities (like uploading some vendor-specific firmware)
these are just Generic xHCI controllers fully compatible with its
properties. Make sure the Renesas USB xHCI DT nodes are also validated
against the Generic xHCI DT schema.
Signed-off-by: Serge Semin
Reviewed-by: Rob Herring
We've performed some work on the Generic USB HCD, xHCI and DWC USB3 DT
bindings in the framework of the Baikal-T1 SoC support integration into
the kernel. This patchset is a result of that work.
First of all we moved the generic USB properties from the legacy text
bindings to the USB DT schema.
There are only four OTG revisions are currently supported by the kernel:
0x0100, 0x0120, 0x0130, 0x0200. Any another value is considered as
invalid.
Signed-off-by: Serge Semin
Reviewed-by: Rob Herring
---
Changelog v4:
- Move the constraints to the usb-drd.yaml schema where the otg-rev
Aside from the UTMI+ there are also ULPI, Serial and HSIC PHY types
that can be specified in the phy_type HCD property. Add them to the
enumeration of the acceptable values.
Signed-off-by: Serge Semin
Reviewed-by: Rob Herring
---
Changelog v2:
- Grammar fix: "s/PHY types can be/PHY types that
22 matches
Mail list logo
