Hi Attila,
Just comment out CONFIG_SUNXI_DISPLAY
--- a/u-boot-2011.09/include/configs/sun7i.h
+++ b/u-boot-2011.09/include/configs/sun7i.h
@@ -150,7 +150,7 @@
#define CONFIG_CMD_BOOTA
#define CONFIG_SUN7I_DMA
#define CONFIG_CMD_MEMORY
-#define CONFIG_SUNXI_DISPLAY
+//#define
On Thursday, May 7, 2015 at 10:00:04 AM UTC+2, Maxime Ripard wrote:
...
any advice for further investigation?
There's more to it.
thanx for the quick reply!
I don't think that ever supposed to work that way, most notably
because it just wouldn't work with SoCs that multiple
On Wednesday, May 6, 2015 at 6:45:56 AM UTC+10, Nick Ludlam wrote:
I've just received my Orange Pi Plus board today, and while I was
downloading the Debian server image I noticed that they've released
something called Linux SDK source code from
On 2015-04-10 at 13:51, Priit Laes pl...@plaes.org wrote:
On Fri, 2015-04-10 at 09:30 +0800, kevin.z.m...@gmail.com wrote:
Hi,
The nand flash driver open source for A10/A13/A20/A31 has been
released,
you can get it from the github
On Wed, May 06, 2015 at 11:48:59PM -0700, Andrea Venturi wrote:
hello,
i have an issue about external interrupts, following this clear example:
http://linux-sunxi.org/External_interrupts
it works for EINT up to EINT21 in PH port, but if i try in an Olimex A20
SOM (on a A20 SOM EVB who
hello,
i have an issue about external interrupts, following this clear example:
http://linux-sunxi.org/External_interrupts
it works for EINT up to EINT21 in PH port, but if i try in an Olimex A20
SOM (on a A20 SOM EVB who have a schematic available showing no hints
AFAICS) an EINT in PI port
Hello,
anybody has seen a device with bootable SPI NOR flash memory?
iirc some of the Allwinner evaluation boards had spi flash but maybe I
am confusing them with other board.
Is it known which SPI bus and CS is checked?
Thanks
Michal
--
You received this message because you are subscribed
: Enable USB support
ARM: dts: sun9i: cubieboard4: Enable LEDs
Thanks for posting these patches. I gave this series a spin on my
cubieboard4 atop next-20150507 both with sunxi_defconfig and
multi_v7_defconfig. Tested all four USB ports with various USB
devices, and for good measure toggled the LED's
Please keep all the recipients in Cc.
On Thu, May 07, 2015 at 02:13:16AM -0700, Andrea Venturi wrote:
I don't think that ever supposed to work that way, most notably
because it just wouldn't work with SoCs that multiple interrupt banks
(like the A31, A23, etc.)
sorry, i'm slowly
On 2015-05-05 at 21:21, jonsm...@gmail.com jonsm...@gmail.com wrote:
On Tue, May 5, 2015 at 12:00 AM, kevin.z.m...@gmail.com
kevin.z.m...@gmail.com wrote:
On 2015-04-29 at 21:20, jonsm...@gmail.com jonsm...@gmail.com wrote:
On Tue, Apr 28, 2015 at 10:37 PM, kevin.z.m...@gmail.com
Hi ALL,
I need to test IOT kind of application with A20 board, but to test i need
kernel which will support 6LowPan .
But only kernel 3.17 and above will support 6LowPan. So is it any branch of
this kernel for A20 or is it possible
to make 3.4 to support 6LowPan?.
Regards
Punith
--
You
On Wed, May 06, 2015 at 12:13:42PM +0200, Maxime Ripard wrote:
On Wed, May 06, 2015 at 11:31:31AM +0200, Jens Kuske wrote:
The H3 SoC has the same dma engine as the A31 (sun6i), with a
reduced amount of endpoints and physical channels. Add the proper
config data and compatible string to
Hi Punith,
On Thu, May 7, 2015 at 10:10 PM, Puneet B punit...@gmail.com wrote:
Hi ALL,
I need to test IOT kind of application with A20 board, but to test i need
kernel which will support 6LowPan .
But only kernel 3.17 and above will support 6LowPan. So is it any branch of
this kernel for
The Cubieboard4 has 2 controllable LEDs, 1 red and 1 green.
Signed-off-by: Chen-Yu Tsai w...@csie.org
---
arch/arm/boot/dts/sun9i-a80-cubieboard4.dts | 23 +++
1 file changed, 23 insertions(+)
diff --git a/arch/arm/boot/dts/sun9i-a80-cubieboard4.dts
The Cubieboard4 has 4 USB ports. 3 of them are connected to a GL850G
USB hub chip on usb1. The fourth one, the lower port of 2 ports next
to the power barrel, is directly connected to usb3.
2 power enable GPIOs are used between the 2 port groups, 1 for each.
This raises the possibility of having
Hi Maxime,
This small series enables USB host and LED support on the Cubieboard4.
We already support these on the Optimus, so it's just dts stuff.
Regards
ChenYu
Chen-Yu Tsai (2):
ARM: dts: sun9i: cubieboard4: Enable USB support
ARM: dts: sun9i: cubieboard4: Enable LEDs
On Thu, May 7, 2015 at 8:10 AM, Puneet B punit...@gmail.com wrote:
Hi ALL,
I need to test IOT kind of application with A20 board, but to test i need
kernel which will support 6LowPan .
But only kernel 3.17 and above will support 6LowPan. So is it any branch of
this kernel for A20 or is it
17 matches
Mail list logo