[linux-sunxi] [PATCH] ARM: dts: sun6i: sina31s: Enable SPDIF out

The SinA31s has a coaxial SPDIF output. Enable it. Signed-off-by: Chen-Yu Tsai --- arch/arm/boot/dts/sun6i-a31s-sina31s.dts | 23 +++ 1 file changed, 23 insertions(+) diff --git a/arch/arm/boot/dts/sun6i-a31s-sina31s.dts b/arch/arm/boot/dts/sun6i-a31s-sina31s.dts index 7ff6

[linux-sunxi] Re: [RESEND PATCH v4 2/9] iio: adc: add support for X-Powers AXP20X and AXP22X PMICs ADCs

Hi, On Mon, Mar 20, 2017 at 4:16 PM, Quentin Schulz wrote: > The X-Powers AXP20X and AXP22X PMICs have multiple ADCs. They expose the > battery voltage, battery charge and discharge currents, AC-in and VBUS > voltages and currents, 2 GPIOs muxable in ADC mode and PMIC temperature. > > This adds s

[linux-sunxi] Re: [PATCH v3 03/11] ARM: dts: sun8i: sina33: add cpu-supply

On Tue, Mar 21, 2017 at 11:36 PM, Quentin Schulz wrote: > This adds the cpu-supply DT property to the cpu0 DT node needed by > the board to adapt the regulator voltage depending on the currently used > OPP. > > Signed-off-by: Quentin Schulz Acked-by: Chen-Yu Tsai -- You received this message

[linux-sunxi] Re: [PATCH v3 01/11] ARM: sun8i: a33: add operating-points-v2 property to all nodes

On Tue, Mar 21, 2017 at 11:36 PM, Quentin Schulz wrote: > The OPP are declared as shared but no operating points are declared for > cpu1, 2 and 3. Thus, the following error happens during the boot: > > cpu cpu1: dev_pm_opp_of_get_sharing_cpus: Couldn't find tcpu_dev node. > > This patch applies th

[linux-sunxi] Re: [PATCH v3 02/11] ARM: sun8i: a33: add all operating points

On Tue, Mar 21, 2017 at 11:36 PM, Quentin Schulz wrote: > This adds almost all operating points allowed for the A33 as defined by > fex files available at: > https://github.com/linux-sunxi/sunxi-boards/tree/master/sys_config/a33 > > There are more possible frequencies in this patch than there are

[linux-sunxi] Re: [PATCH v2 4/7] sunxi: Add clock support for DE2/HDMI/TCON on newer SoCs

Hi, Dne torek, 21. marec 2017 ob 20:34:33 CET je Maxime Ripard napisal(a): > Hi, > > On Mon, Mar 20, 2017 at 11:01:25PM +0100, Jernej Skrabec wrote: > > diff --git a/include/configs/sun50i.h b/include/configs/sun50i.h > > index 1b7bfb6c22..146f7f4e1b 100644 > > --- a/include/configs/sun50i.h > >

[linux-sunxi] SPI NOR boot planning

I am trying to create an open source point-and-shoot camera based on some spare parts lying in my bin and the V3s, but still in the style of a single-board computer. V3s don't have a lot of I/O pins and the planned features exhausted it. (I even have

[linux-sunxi] V3s NOR size limit

Dear List: I wonder if V3s BROM, U-Boot and Linux kernel can support more than 24 bits in SPI NOR addresses? I am thinking about creating a gadget that boots off NOR directly for a full embedded Linux build. Max -- You received this message because you are subscribed to the Google Groups "li

[linux-sunxi] Re: [PATCH v2 6/7] sunxi: Disable DE2 video driver where not needed

On Mon, Mar 20, 2017 at 11:01:27PM +0100, Jernej Skrabec wrote: > Because DE2 driver is enabled by default, it is nice to disable it on > all boards which don't have any video output. List of such boards is > also much shorter. > > Signed-off-by: Jernej Skrabec Acked-by: Maxime Ripard Thanks,

[linux-sunxi] Re: [PATCH v2 5/7] sunxi: video: Add A64/H3/H5 HDMI driver

On Mon, Mar 20, 2017 at 11:01:26PM +0100, Jernej Skrabec wrote: > This commit adds support for HDMI output. > > Signed-off-by: Jernej Skrabec > Reviewed-by: Simon Glass Acked-by: Maxime Ripard Thanks! Maxime -- Maxime Ripard, Free Electrons Embedded Linux and Kernel engineering http://free-

[linux-sunxi] Re: [PATCH v2 4/7] sunxi: Add clock support for DE2/HDMI/TCON on newer SoCs

Hi, On Mon, Mar 20, 2017 at 11:01:25PM +0100, Jernej Skrabec wrote: > diff --git a/include/configs/sun50i.h b/include/configs/sun50i.h > index 1b7bfb6c22..146f7f4e1b 100644 > --- a/include/configs/sun50i.h > +++ b/include/configs/sun50i.h > @@ -21,6 +21,8 @@ > #define GICD_BASE0x1c810

[linux-sunxi] Re: [PATCH v2 3/7] sunxi: video: Convert lcdc to use struct display_timing

On Mon, Mar 20, 2017 at 11:01:24PM +0100, Jernej Skrabec wrote: > Video driver for older Allwinner SoCs uses cfb console framework which > in turn uses struct ctfb_res_modes to hold timing informations. However, > DM video framework uses different structure - struct display_timing. > > It makes mo

[linux-sunxi] Re: [PATCH v2 2/7] sunxi: video: Split out TCON code

On Mon, Mar 20, 2017 at 11:01:23PM +0100, Jernej Skrabec wrote: > TCON unit has similar layout and functionality also on newer SoCs. This > commit splits out TCON code for easier reuse later. > > Signed-off-by: Jernej Skrabec Acked-by: Maxime Ripard Thanks! Maxime -- Maxime Ripard, Free Elec

Re: [linux-sunxi] Help with V3s

On Tue, Mar 21, 2017 at 4:06 PM, Petar Dimitrijevic wrote: > Hi, > > I've received a V3s development board few days ago. It has an android FW > with Camdroid installed booting from SPI NOR flash. > Picture of the board as well as the fex file are attached to this message. Where have you bought it

Re: [linux-sunxi] Help with V3s

21.03.2017, 23:07, "Petar Dimitrijevic" : > Hi, > > I've received a V3s development board few days ago. It has an android FW with > Camdroid installed booting from SPI NOR flash. > Picture of the board as well as the fex file are attached to this message. > > The SDK generates android image whic

Re: [linux-sunxi] [PATCH v2 0/7] sunxi: video: Add support for HDMI output on A64/H3/H5

I can also confirm this on an A20 with HDMI. Much appreciated, CK On 21 March 2017 at 01:02, Icenowy Zheng wrote: > > > 21.03.2017, 06:01, "Jernej Skrabec" : >> This series implements support for HDMI output. This is done using >> DM video framework and sharing the HDMI controller code with RK328

Re: [linux-sunxi] Help with V3s

2017年3月21日 23:06于 Petar Dimitrijevic 写道： > > Hi, > > I've received a V3s development board few days ago. It has an android FW with Camdroid installed booting from SPI NOR flash. > Picture of the board as well as the fex file are attached to this message. > > > The SDK generates android image which

[linux-sunxi] Re: [PATCH v2 1/5] dt-bindings: update device tree binding for Allwinner PRCM CCUs

21.03.2017, 15:41, "Maxime Ripard" : > On Thu, Mar 16, 2017 at 01:28:04AM +0800, Icenowy Zheng wrote: >>  Many Allwinner SoCs after A31 have a CCU in PRCM block. >> >>  Give the ones on H3 and A64 compatible strings. >> >>  Signed-off-by: Icenowy Zheng >>  --- >>  Changes in v2: >>  - Add iosc f

[linux-sunxi] Re: [PATCH] ARM: sun8i: a33: remove highest OPP to fix CPU crashes

On Mon, Mar 20, 2017 at 12:25:51PM +0100, Quentin Schulz wrote: > The highest supported frequency (1.2GHz) requires to "overvolt" the CPU. > However, some boards still do not have the cpu-supply DT property in the > cpu DT node which means that the CPU will always run with the same input > voltage

[linux-sunxi] [PATCH v3 00/11] add thermal throttling to Allwinner A33 SoC

The Allwinner SoCs all have an ADC that can also act as a touchscreen controller and a thermal sensor. The first four channels can be used either for the ADC or the touchscreen and the fifth channel is used for the thermal sensor. We currently have a driver for the two latter functions in drivers/i

[linux-sunxi] [PATCH v3 11/11] ARM: sun8i: sina33: add highest OPP of CPUs

The A33 supports 1.1GHz and 1.2GHz frequencies at 1.32V and the Sinlinx SinA33 has its cpu-supply property set in the cpu DT node. Therefore, CPUfreq knows how to handle the regulator in charge of the CPU and can adjust its voltage to match the OPP. Add these two CPU frequencies to the CPU OPP ta

[linux-sunxi] [PATCH v3 01/11] ARM: sun8i: a33: add operating-points-v2 property to all nodes

The OPP are declared as shared but no operating points are declared for cpu1, 2 and 3. Thus, the following error happens during the boot: cpu cpu1: dev_pm_opp_of_get_sharing_cpus: Couldn't find tcpu_dev node. This patch applies the operating points to each cpu of the A33. Signed-off-by: Quentin

[linux-sunxi] [PATCH v3 10/11] ARM: sun8i: a33: Add devfreq-based GPU cooling

From: Maxime Ripard This adds GPU thermal throttling for the Allwinner A33. Signed-off-by: Maxime Ripard Signed-off-by: Quentin Schulz --- v3: - got rid of cooling-min-level and cooling-max-level as it's not used in any code in the kernel, added in v2 arch/arm/boot/dts/sun8i-a23-a33.dt

[linux-sunxi] [PATCH v3 02/11] ARM: sun8i: a33: add all operating points

This adds almost all operating points allowed for the A33 as defined by fex files available at: https://github.com/linux-sunxi/sunxi-boards/tree/master/sys_config/a33 There are more possible frequencies in this patch than there are in the fex files because the fex files only give an interval of po

[linux-sunxi] [PATCH v3 04/11] Documentation: DT: bindings: mfd: add A33 GPADC binding

This patch adds documentation for the A33 GPADC binding. Signed-off-by: Quentin Schulz --- v3: - fixed missing allwinner in front of compatible, - updated compatible to allwinner,sun8i-a33-ths to better reflect the datasheet's name, - updated example's DT node name and label to ths, add

[linux-sunxi] [PATCH v3 09/11] ARM: dtsi: sun8i: a33: add CPU thermal throttling

This adds CPU thermal throttling for the Allwinner A33. It uses the thermal sensor present in the SoC's GPADC. Signed-off-by: Quentin Schulz --- v3: - switched to new phandle because of modified DT node name for the GPADC (named THS), - got rid of cooling-min-level and cooling-max-level as

[linux-sunxi] [PATCH v3 07/11] iio: adc: sun4i-gpadc-iio: add support for A33 thermal sensor

This adds support for the Allwinner A33 thermal sensor. Unlike the A10, A13 and A31, the Allwinner A33 only has one channel which is dedicated to the thermal sensor. Moreover, its thermal sensor does not generate interruptions, thus we only need to directly read the register storing the temperatur

[linux-sunxi] [PATCH v3 06/11] iio: adc: sun4i-gpadc-iio: move code used in MFD probing to new function

This moves code used in MFD probing to a new sun4i_gpadc_probe_mfd function. This driver was initially written for A10, A13 and A31 SoCs which already had a DT binding for this IP, thus we needed to use an MFD to probe the different drivers without changing the DT binding of these SoCs. For SoCs

[linux-sunxi] [PATCH v3 08/11] ARM: dtsi: sun8i: a33: add thermal sensor

This adds the DT node for the thermal sensor present in the Allwinner A33 GPADC. Signed-off-by: Quentin Schulz --- v3: - switched compatible to allwinner,sun8i-a33-ths, - renamed DT node name and label to ths to better match datasheet's name, arch/arm/boot/dts/sun8i-a33.dtsi | 12 +

[linux-sunxi] [PATCH v3 05/11] Documentation: DT: bindings: input: touschcreen: remove sun4i documentation

This patch removes the sun4i touchscreen controller binding documentation since it has been merged with the sun4i GPADC binding documentation. Signed-off-by: Quentin Schulz Acked-by: Rob Herring --- added in v2 .../bindings/input/touchscreen/sun4i.txt | 38 -- 1

[linux-sunxi] [PATCH v3 03/11] ARM: dts: sun8i: sina33: add cpu-supply

This adds the cpu-supply DT property to the cpu0 DT node needed by the board to adapt the regulator voltage depending on the currently used OPP. Signed-off-by: Quentin Schulz --- arch/arm/boot/dts/sun8i-a33-sinlinx-sina33.dts | 4 1 file changed, 4 insertions(+) diff --git a/arch/arm/boot/

Re: [linux-sunxi] Re: [PATCH v2 1/5] dt-bindings: update device tree binding for Allwinner PRCM CCUs

2017年3月21日 下午3:41于 Maxime Ripard 写道： > > On Thu, Mar 16, 2017 at 01:28:04AM +0800, Icenowy Zheng wrote: > > Many Allwinner SoCs after A31 have a CCU in PRCM block. > > > > Give the ones on H3 and A64 compatible strings. > > > > Signed-off-by: Icenowy Zheng > > --- > > Changes in v2: > > -

[linux-sunxi] Re: [PATCH v2 1/5] dt-bindings: update device tree binding for Allwinner PRCM CCUs

On Thu, Mar 16, 2017 at 01:28:04AM +0800, Icenowy Zheng wrote: > Many Allwinner SoCs after A31 have a CCU in PRCM block. > > Give the ones on H3 and A64 compatible strings. > > Signed-off-by: Icenowy Zheng > --- > Changes in v2: > - Add iosc for R_CCU's on H3/A64. (A31, A23 and A33 seem to have