On Sat, Jun 20, 2020 at 11:25:29PM +0200, Sam Ravnborg wrote:
> Hi Ondrej et al.
>
> On Wed, Jun 17, 2020 at 02:32:07AM +0200, Ondrej Jirman wrote:
> > From: Icenowy Zheng <icen...@aosc.io>
> >
> > Xingbangda XBD599 is a 5.99" 720x1440 MIPI-DSI IPS LCD panel made by
> > Xingbangda, which is used on PinePhone final assembled phones.
> >
> > It is based on Sitronix ST7703 LCD controller.
>
> I am a little late to the game here - so sorry if this has been
> discussed before.
> We already have panel-rocktech-jh057n00900.c which is a panle driver
> based on st7703.
> Why is it we need a new driver?
No reason other than the driver not being named after the controller,
so I didn't notice.
> Would it not be better to have one st7703 driver that suipports both
> panels?
>
> The driver would need dedicated init functions depending on the panel.
> But a lot could also be shared.
I guess I can move the code there.
regards,
o.
> Sam
>
> >
> > Add support for it.
> >
> > Signed-off-by: Icenowy Zheng <icen...@aosc.io>
> > Signed-off-by: Ondrej Jirman <meg...@megous.com>
> > ---
> > drivers/gpu/drm/panel/Kconfig | 10 +
> > drivers/gpu/drm/panel/Makefile | 1 +
> > drivers/gpu/drm/panel/panel-sitronix-st7703.c | 535 ++++++++++++++++++
> > 3 files changed, 546 insertions(+)
> > create mode 100644 drivers/gpu/drm/panel/panel-sitronix-st7703.c
> >
> > diff --git a/drivers/gpu/drm/panel/Kconfig b/drivers/gpu/drm/panel/Kconfig
> > index 39055c1f0e2f..b7bc157b0612 100644
> > --- a/drivers/gpu/drm/panel/Kconfig
> > +++ b/drivers/gpu/drm/panel/Kconfig
> > @@ -395,6 +395,16 @@ config DRM_PANEL_SITRONIX_ST7701
> > ST7701 controller for 480X864 LCD panels with MIPI/RGB/SPI
> > system interfaces.
> >
> > +config DRM_PANEL_SITRONIX_ST7703
> > + tristate "Sitronix ST7703 panel driver"
> > + depends on OF
> > + depends on DRM_MIPI_DSI
> > + depends on BACKLIGHT_CLASS_DEVICE
> > + help
> > + Say Y here if you want to enable support for the Sitronix
> > + ST7703 controller for 720X1440 LCD panels with MIPI/RGB/SPI
> > + system interfaces.
> > +
> > config DRM_PANEL_SITRONIX_ST7789V
> > tristate "Sitronix ST7789V panel"
> > depends on OF && SPI
> > diff --git a/drivers/gpu/drm/panel/Makefile b/drivers/gpu/drm/panel/Makefile
> > index de74f282c433..47f4789a8685 100644
> > --- a/drivers/gpu/drm/panel/Makefile
> > +++ b/drivers/gpu/drm/panel/Makefile
> > @@ -41,6 +41,7 @@ obj-$(CONFIG_DRM_PANEL_SHARP_LQ101R1SX01) +=
> > panel-sharp-lq101r1sx01.o
> > obj-$(CONFIG_DRM_PANEL_SHARP_LS037V7DW01) += panel-sharp-ls037v7dw01.o
> > obj-$(CONFIG_DRM_PANEL_SHARP_LS043T1LE01) += panel-sharp-ls043t1le01.o
> > obj-$(CONFIG_DRM_PANEL_SITRONIX_ST7701) += panel-sitronix-st7701.o
> > +obj-$(CONFIG_DRM_PANEL_SITRONIX_ST7703) += panel-sitronix-st7703.o
> > obj-$(CONFIG_DRM_PANEL_SITRONIX_ST7789V) += panel-sitronix-st7789v.o
> > obj-$(CONFIG_DRM_PANEL_SONY_ACX424AKP) += panel-sony-acx424akp.o
> > obj-$(CONFIG_DRM_PANEL_SONY_ACX565AKM) += panel-sony-acx565akm.o
> > diff --git a/drivers/gpu/drm/panel/panel-sitronix-st7703.c
> > b/drivers/gpu/drm/panel/panel-sitronix-st7703.c
> > new file mode 100644
> > index 000000000000..dbd46b6c0b46
> > --- /dev/null
> > +++ b/drivers/gpu/drm/panel/panel-sitronix-st7703.c
> > @@ -0,0 +1,535 @@
> > +// SPDX-License-Identifier: GPL-2.0
> > +/*
> > + * DRM driver for Sitronix ST7703 MIPI DSI panel
> > + *
> > + * Copyright (C) 2020 Ondrej Jirman <meg...@megous.com>
> > + * Copyright (C) 2019-2020 Icenowy Zheng <icen...@aosc.io>
> > + *
> > + * Based on panel-rocktech-jh057n00900.c, which is:
> > + * Copyright (C) Purism SPC 2019
> > + */
> > +
> > +#include <linux/delay.h>
> > +#include <linux/gpio/consumer.h>
> > +#include <linux/mod_devicetable.h>
> > +#include <linux/module.h>
> > +#include <linux/of_device.h>
> > +#include <linux/regulator/consumer.h>
> > +
> > +#include <drm/drm_mipi_dsi.h>
> > +#include <drm/drm_modes.h>
> > +#include <drm/drm_panel.h>
> > +#include <drm/drm_print.h>
> > +
> > +/* Manufacturer specific DCS commands */
> > +#define ST7703_CMD_SETDISP 0xB2
> > +#define ST7703_CMD_SETRGBIF 0xB3
> > +#define ST7703_CMD_SETCYC 0xB4
> > +#define ST7703_CMD_SETBGP 0xB5
> > +#define ST7703_CMD_SETVCOM 0xB6
> > +#define ST7703_CMD_SETOTP 0xB7
> > +#define ST7703_CMD_SETPOWER_EXT 0xB8
> > +#define ST7703_CMD_SETEXTC 0xB9
> > +#define ST7703_CMD_SETMIPI 0xBA
> > +#define ST7703_CMD_SETVDC 0xBC
> > +#define ST7703_CMD_UNK_BF 0xBF
> > +#define ST7703_CMD_SETSCR 0xC0
> > +#define ST7703_CMD_SETPOWER 0xC1
> > +#define ST7703_CMD_UNK_C6 0xC6
> > +#define ST7703_CMD_SETPANEL 0xCC
> > +#define ST7703_CMD_RDID1 0xDA
> > +#define ST7703_CMD_RDID2 0xDB
> > +#define ST7703_CMD_RDID3 0xDC
> > +#define ST7703_CMD_SETGAMMA 0xE0
> > +#define ST7703_CMD_SETEQ 0xE3
> > +#define ST7703_CMD_SETGIP1 0xE9
> > +#define ST7703_CMD_SETGIP2 0xEA
> > +
> > +struct st7703_panel_desc {
> > + const struct drm_display_mode *mode;
> > + unsigned int lanes;
> > + unsigned long flags;
> > + enum mipi_dsi_pixel_format format;
> > + const char *const *supply_names;
> > + unsigned int num_supplies;
> > +};
> > +
> > +struct st7703 {
> > + struct device *dev;
> > + struct drm_panel panel;
> > + struct gpio_desc *reset_gpio;
> > + struct regulator_bulk_data *supplies;
> > + const struct st7703_panel_desc *desc;
> > + bool prepared;
> > +};
> > +
> > +static inline struct st7703 *panel_to_st7703(struct drm_panel *panel)
> > +{
> > + return container_of(panel, struct st7703, panel);
> > +}
> > +
> > +#define dsi_dcs_write_seq(dsi, cmd, seq...) do { \
> > + static const u8 d[] = { seq }; \
> > + int ret; \
> > + ret = mipi_dsi_dcs_write(dsi, cmd, d, ARRAY_SIZE(d)); \
> > + if (ret < 0) \
> > + return ret; \
> > + } while (0)
> > +
> > +
> > +static int st7703_init_sequence(struct st7703 *ctx)
> > +{
> > + struct mipi_dsi_device *dsi = to_mipi_dsi_device(ctx->dev);
> > + struct device *dev = ctx->dev;
> > +
> > + /*
> > + * Init sequence was supplied by the panel vendor.
> > + */
> > +
> > + /* Magic sequence to unlock user commands below. */
> > + dsi_dcs_write_seq(dsi, ST7703_CMD_SETEXTC, 0xF1, 0x12, 0x83);
> > +
> > + dsi_dcs_write_seq(dsi, ST7703_CMD_SETMIPI,
> > + 0x33, /* VC_main = 0, Lane_Number = 3 (4 lanes) */
> > + 0x81, /* DSI_LDO_SEL = 1.7V, RTERM = 90 Ohm */
> > + 0x05, /* IHSRX = x6 (Low High Speed driving ability)
> > */
> > + 0xF9, /* TX_CLK_SEL = fDSICLK/16 */
> > + 0x0E, /* HFP_OSC (min. HFP number in DSI mode) */
> > + 0x0E, /* HBP_OSC (min. HBP number in DSI mode) */
> > + /* The rest is undocumented in ST7703 datasheet */
> > + 0x20, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
> > + 0x44, 0x25, 0x00, 0x91, 0x0a, 0x00, 0x00, 0x02,
> > + 0x4F, 0x11, 0x00, 0x00, 0x37);
> > +
> > + dsi_dcs_write_seq(dsi, ST7703_CMD_SETPOWER_EXT,
> > + 0x25, /* PCCS = 2, ECP_DC_DIV = 1/4 HSYNC */
> > + 0x22, /* DT = 15ms XDK_ECP = x2 */
> > + 0x20, /* PFM_DC_DIV = /1 */
> > + 0x03 /* ECP_SYNC_EN = 1, VGX_SYNC_EN = 1 */);
> > +
> > + /* RGB I/F porch timing */
> > + dsi_dcs_write_seq(dsi, ST7703_CMD_SETRGBIF,
> > + 0x10, /* VBP_RGB_GEN */
> > + 0x10, /* VFP_RGB_GEN */
> > + 0x05, /* DE_BP_RGB_GEN */
> > + 0x05, /* DE_FP_RGB_GEN */
> > + /* The rest is undocumented in ST7703 datasheet */
> > + 0x03, 0xFF,
> > + 0x00, 0x00,
> > + 0x00, 0x00);
> > +
> > + /* Source driving settings. */
> > + dsi_dcs_write_seq(dsi, ST7703_CMD_SETSCR,
> > + 0x73, /* N_POPON */
> > + 0x73, /* N_NOPON */
> > + 0x50, /* I_POPON */
> > + 0x50, /* I_NOPON */
> > + 0x00, /* SCR[31,24] */
> > + 0xC0, /* SCR[23,16] */
> > + 0x08, /* SCR[15,8] */
> > + 0x70, /* SCR[7,0] */
> > + 0x00 /* Undocumented */);
> > +
> > + /* NVDDD_SEL = -1.8V, VDDD_SEL = out of range (possibly 1.9V?) */
> > + dsi_dcs_write_seq(dsi, ST7703_CMD_SETVDC, 0x4E);
> > +
> > + /*
> > + * SS_PANEL = 1 (reverse scan), GS_PANEL = 0 (normal scan)
> > + * REV_PANEL = 1 (normally black panel), BGR_PANEL = 1 (BGR)
> > + */
> > + dsi_dcs_write_seq(dsi, ST7703_CMD_SETPANEL, 0x0B);
> > +
> > + /* Zig-Zag Type C column inversion. */
> > + dsi_dcs_write_seq(dsi, ST7703_CMD_SETCYC, 0x80);
> > +
> > + /* Set display resolution. */
> > + dsi_dcs_write_seq(dsi, ST7703_CMD_SETDISP,
> > + 0xF0, /* NL = 240 */
> > + 0x12, /* RES_V_LSB = 0, BLK_CON = VSSD,
> > + * RESO_SEL = 720RGB
> > + */
> > + 0xF0 /* WHITE_GND_EN = 1 (GND),
> > + * WHITE_FRAME_SEL = 7 frames,
> > + * ISC = 0 frames
> > + */);
> > +
> > + dsi_dcs_write_seq(dsi, ST7703_CMD_SETEQ,
> > + 0x00, /* PNOEQ */
> > + 0x00, /* NNOEQ */
> > + 0x0B, /* PEQGND */
> > + 0x0B, /* NEQGND */
> > + 0x10, /* PEQVCI */
> > + 0x10, /* NEQVCI */
> > + 0x00, /* PEQVCI1 */
> > + 0x00, /* NEQVCI1 */
> > + 0x00, /* reserved */
> > + 0x00, /* reserved */
> > + 0xFF, /* reserved */
> > + 0x00, /* reserved */
> > + 0xC0, /* ESD_DET_DATA_WHITE = 1, ESD_WHITE_EN = 1 */
> > + 0x10 /* SLPIN_OPTION = 1 (no need vsync after
> > sleep-in)
> > + * VEDIO_NO_CHECK_EN = 0
> > + * ESD_WHITE_GND_EN = 0
> > + * ESD_DET_TIME_SEL = 0 frames
> > + */);
> > +
> > + /* Undocumented command. */
> > + dsi_dcs_write_seq(dsi, ST7703_CMD_UNK_C6, 0x01, 0x00, 0xFF, 0xFF, 0x00);
> > +
> > + dsi_dcs_write_seq(dsi, ST7703_CMD_SETPOWER,
> > + 0x74, /* VBTHS, VBTLS: VGH = 17V, VBL = -11V */
> > + 0x00, /* FBOFF_VGH = 0, FBOFF_VGL = 0 */
> > + 0x32, /* VRP */
> > + 0x32, /* VRN */
> > + 0x77, /* reserved */
> > + 0xF1, /* APS = 1 (small),
> > + * VGL_DET_EN = 1, VGH_DET_EN = 1,
> > + * VGL_TURBO = 1, VGH_TURBO = 1
> > + */
> > + 0xFF, /* VGH1_L_DIV, VGL1_L_DIV (1.5MHz) */
> > + 0xFF, /* VGH1_R_DIV, VGL1_R_DIV (1.5MHz) */
> > + 0xCC, /* VGH2_L_DIV, VGL2_L_DIV (2.6MHz) */
> > + 0xCC, /* VGH2_R_DIV, VGL2_R_DIV (2.6MHz) */
> > + 0x77, /* VGH3_L_DIV, VGL3_L_DIV (4.5MHz) */
> > + 0x77 /* VGH3_R_DIV, VGL3_R_DIV (4.5MHz) */);
> > +
> > + /* Reference voltage. */
> > + dsi_dcs_write_seq(dsi, ST7703_CMD_SETBGP,
> > + 0x07, /* VREF_SEL = 4.2V */
> > + 0x07 /* NVREF_SEL = 4.2V */);
> > +
> > + dsi_dcs_write_seq(dsi, ST7703_CMD_SETVCOM,
> > + 0x2C, /* VCOMDC_F = -0.67V */
> > + 0x2C /* VCOMDC_B = -0.67V */);
> > +
> > + /* Undocumented command. */
> > + dsi_dcs_write_seq(dsi, ST7703_CMD_UNK_BF, 0x02, 0x11, 0x00);
> > +
> > + /* This command is to set forward GIP timing. */
> > + dsi_dcs_write_seq(dsi, ST7703_CMD_SETGIP1,
> > + 0x82, 0x10, 0x06, 0x05, 0xA2, 0x0A, 0xA5, 0x12,
> > + 0x31, 0x23, 0x37, 0x83, 0x04, 0xBC, 0x27, 0x38,
> > + 0x0C, 0x00, 0x03, 0x00, 0x00, 0x00, 0x0C, 0x00,
> > + 0x03, 0x00, 0x00, 0x00, 0x75, 0x75, 0x31, 0x88,
> > + 0x88, 0x88, 0x88, 0x88, 0x88, 0x13, 0x88, 0x64,
> > + 0x64, 0x20, 0x88, 0x88, 0x88, 0x88, 0x88, 0x88,
> > + 0x02, 0x88, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
> > + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00);
> > +
> > + /* This command is to set backward GIP timing. */
> > + dsi_dcs_write_seq(dsi, ST7703_CMD_SETGIP2,
> > + 0x02, 0x21, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
> > + 0x00, 0x00, 0x00, 0x00, 0x02, 0x46, 0x02, 0x88,
> > + 0x88, 0x88, 0x88, 0x88, 0x88, 0x64, 0x88, 0x13,
> > + 0x57, 0x13, 0x88, 0x88, 0x88, 0x88, 0x88, 0x88,
> > + 0x75, 0x88, 0x23, 0x14, 0x00, 0x00, 0x02, 0x00,
> > + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
> > + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x03, 0x0A,
> > + 0xA5, 0x00, 0x00, 0x00, 0x00);
> > +
> > + /* Adjust the gamma characteristics of the panel. */
> > + dsi_dcs_write_seq(dsi, ST7703_CMD_SETGAMMA,
> > + 0x00, 0x09, 0x0D, 0x23, 0x27, 0x3C, 0x41, 0x35,
> > + 0x07, 0x0D, 0x0E, 0x12, 0x13, 0x10, 0x12, 0x12,
> > + 0x18, 0x00, 0x09, 0x0D, 0x23, 0x27, 0x3C, 0x41,
> > + 0x35, 0x07, 0x0D, 0x0E, 0x12, 0x13, 0x10, 0x12,
> > + 0x12, 0x18);
> > +
> > + DRM_DEV_DEBUG_DRIVER(dev, "Panel init sequence done\n");
> > + return 0;
> > +}
> > +
> > +static int st7703_read_id(struct st7703 *ctx)
> > +{
> > + struct mipi_dsi_device *dsi = to_mipi_dsi_device(ctx->dev);
> > + u8 id1, id2, id3;
> > + int ret;
> > +
> > + ret = mipi_dsi_dcs_read(dsi, ST7703_CMD_RDID1, &id1, 1);
> > + if (ret < 0) {
> > + DRM_DEV_ERROR(ctx->dev, "could not read ID1\n");
> > + return ret;
> > + }
> > +
> > + ret = mipi_dsi_dcs_read(dsi, ST7703_CMD_RDID2, &id2, 1);
> > + if (ret < 0) {
> > + DRM_DEV_ERROR(ctx->dev, "could not read ID2\n");
> > + return ret;
> > + }
> > +
> > + ret = mipi_dsi_dcs_read(dsi, ST7703_CMD_RDID3, &id3, 1);
> > + if (ret < 0) {
> > + DRM_DEV_ERROR(ctx->dev, "could not read ID3\n");
> > + return ret;
> > + }
> > +
> > + DRM_DEV_INFO(ctx->dev,
> > + "manufacturer: %02x version: %02x driver: %02x\n",
> > + id1, id2, id3);
> > +
> > + return 0;
> > +}
> > +
> > +static int st7703_prepare(struct drm_panel *panel)
> > +{
> > + struct st7703 *ctx = panel_to_st7703(panel);
> > + struct mipi_dsi_device *dsi = to_mipi_dsi_device(ctx->dev);
> > + int ret;
> > +
> > + if (ctx->prepared)
> > + return 0;
> > +
> > + gpiod_set_value_cansleep(ctx->reset_gpio, 1);
> > +
> > + ret = regulator_bulk_enable(ctx->desc->num_supplies, ctx->supplies);
> > + if (ret)
> > + return ret;
> > +
> > + /* Wait for regulators to stabilize. */
> > + usleep_range(10000, 20000);
> > +
> > + gpiod_set_value_cansleep(ctx->reset_gpio, 0);
> > +
> > + /* There needs to be at least 15ms post-reset delay. */
> > + usleep_range(15000, 20000);
> > +
> > + ret = st7703_read_id(ctx);
> > + if (ret < 0)
> > + goto err_poweroff;
> > +
> > + ret = st7703_init_sequence(ctx);
> > + if (ret < 0) {
> > + DRM_DEV_ERROR(ctx->dev,
> > + "Panel init sequence failed (%d)\n", ret);
> > + goto err_poweroff;
> > + }
> > +
> > + ret = mipi_dsi_dcs_exit_sleep_mode(dsi);
> > + if (ret < 0) {
> > + DRM_DEV_ERROR(ctx->dev,
> > + "Failed to exit sleep mode (%d)\n", ret);
> > + goto err_poweroff;
> > + }
> > +
> > + msleep(120);
> > +
> > + ret = mipi_dsi_dcs_set_display_on(dsi);
> > + if (ret) {
> > + DRM_DEV_ERROR(ctx->dev,
> > + "Failed to turn on the display (%d)\n", ret);
> > + goto err_poweroff;
> > + }
> > +
> > + ctx->prepared = true;
> > +
> > + return 0;
> > +
> > +err_poweroff:
> > + gpiod_set_value_cansleep(ctx->reset_gpio, 1);
> > + regulator_bulk_disable(ctx->desc->num_supplies, ctx->supplies);
> > + return ret;
> > +}
> > +
> > +static int st7703_enable(struct drm_panel *panel)
> > +{
> > + /*
> > + * Avoid flicker by waiting for slightly more than 1
> > + * frame's interval.
> > + */
> > + msleep(50);
> > +
> > + return 0;
> > +}
> > +
> > +static int st7703_unprepare(struct drm_panel *panel)
> > +{
> > + struct st7703 *ctx = panel_to_st7703(panel);
> > + struct mipi_dsi_device *dsi = to_mipi_dsi_device(ctx->dev);
> > + int ret;
> > +
> > + if (!ctx->prepared)
> > + return 0;
> > +
> > + ret = mipi_dsi_dcs_set_display_off(dsi);
> > + if (ret < 0)
> > + DRM_DEV_ERROR(ctx->dev,
> > + "Failed to turn off the display (%d)\n", ret);
> > +
> > + ret = mipi_dsi_dcs_enter_sleep_mode(dsi);
> > + if (ret < 0)
> > + DRM_DEV_ERROR(ctx->dev,
> > + "Failed to enter sleep mode (%d)\n", ret);
> > +
> > + gpiod_set_value_cansleep(ctx->reset_gpio, 1);
> > + regulator_bulk_disable(ctx->desc->num_supplies, ctx->supplies);
> > + ctx->prepared = false;
> > +
> > + return 0;
> > +}
> > +
> > +static int st7703_get_modes(struct drm_panel *panel,
> > + struct drm_connector *connector)
> > +{
> > + struct st7703 *ctx = panel_to_st7703(panel);
> > + struct drm_display_mode *mode;
> > +
> > + mode = drm_mode_duplicate(connector->dev, ctx->desc->mode);
> > + if (!mode) {
> > + DRM_DEV_ERROR(ctx->dev, "Failed to add mode\n");
> > + return -ENOMEM;
> > + }
> > +
> > + drm_mode_set_name(mode);
> > +
> > + connector->display_info.width_mm = mode->width_mm;
> > + connector->display_info.height_mm = mode->height_mm;
> > + drm_mode_probed_add(connector, mode);
> > +
> > + return 1;
> > +}
> > +
> > +static const struct drm_panel_funcs st7703_drm_funcs = {
> > + .prepare = st7703_prepare,
> > + .enable = st7703_enable,
> > + .unprepare = st7703_unprepare,
> > + .get_modes = st7703_get_modes,
> > +};
> > +
> > +static const struct drm_display_mode xbd599_mode = {
> > + .hdisplay = 720,
> > + .hsync_start = 720 + 40,
> > + .hsync_end = 720 + 40 + 40,
> > + .htotal = 720 + 40 + 40 + 40,
> > + .vdisplay = 1440,
> > + .vsync_start = 1440 + 18,
> > + .vsync_end = 1440 + 18 + 10,
> > + .vtotal = 1440 + 18 + 10 + 17,
> > + .vrefresh = 60,
> > + .clock = 69000,
> > + .flags = DRM_MODE_FLAG_NHSYNC | DRM_MODE_FLAG_NVSYNC,
> > +
> > + .width_mm = 68,
> > + .height_mm = 136,
> > + .type = DRM_MODE_TYPE_DRIVER | DRM_MODE_TYPE_PREFERRED,
> > +};
> > +
> > +static const char * const xbd599_supply_names[] = {
> > + "iovcc",
> > + "vcc",
> > +};
> > +
> > +static const struct st7703_panel_desc xbd599_desc = {
> > + .mode = &xbd599_mode,
> > + .lanes = 4,
> > + .flags = MIPI_DSI_MODE_VIDEO | MIPI_DSI_MODE_VIDEO_SYNC_PULSE,
> > + .format = MIPI_DSI_FMT_RGB888,
> > + .supply_names = xbd599_supply_names,
> > + .num_supplies = ARRAY_SIZE(xbd599_supply_names),
> > +};
> > +
> > +static int st7703_probe(struct mipi_dsi_device *dsi)
> > +{
> > + const struct st7703_panel_desc *desc;
> > + struct device *dev = &dsi->dev;
> > + struct st7703 *ctx;
> > + int i, ret;
> > +
> > + ctx = devm_kzalloc(dev, sizeof(*ctx), GFP_KERNEL);
> > + if (!ctx)
> > + return -ENOMEM;
> > +
> > + ctx->dev = dev;
> > + ctx->desc = desc = of_device_get_match_data(dev);
> > +
> > + dsi->mode_flags = desc->flags;
> > + dsi->format = desc->format;
> > + dsi->lanes = desc->lanes;
> > +
> > + ctx->supplies = devm_kcalloc(&dsi->dev, desc->num_supplies,
> > + sizeof(*ctx->supplies),
> > + GFP_KERNEL);
> > + if (!ctx->supplies)
> > + return -ENOMEM;
> > +
> > + for (i = 0; i < desc->num_supplies; i++)
> > + ctx->supplies[i].supply = desc->supply_names[i];
> > +
> > + ret = devm_regulator_bulk_get(&dsi->dev, desc->num_supplies,
> > + ctx->supplies);
> > + if (ret < 0)
> > + return ret;
> > +
> > + ctx->reset_gpio = devm_gpiod_get(dev, "reset", GPIOD_OUT_LOW);
> > + if (IS_ERR(ctx->reset_gpio)) {
> > + DRM_DEV_ERROR(dev, "Can't get reset gpio\n");
> > + return PTR_ERR(ctx->reset_gpio);
> > + }
> > +
> > + mipi_dsi_set_drvdata(dsi, ctx);
> > +
> > + drm_panel_init(&ctx->panel, &dsi->dev, &st7703_drm_funcs,
> > + DRM_MODE_CONNECTOR_DSI);
> > +
> > + ret = drm_panel_of_backlight(&ctx->panel);
> > + if (ret)
> > + return ret;
> > +
> > + drm_panel_add(&ctx->panel);
> > +
> > + ret = mipi_dsi_attach(dsi);
> > + if (ret < 0) {
> > + drm_panel_remove(&ctx->panel);
> > + return ret;
> > + }
> > +
> > + return 0;
> > +}
> > +
> > +static void st7703_shutdown(struct mipi_dsi_device *dsi)
> > +{
> > + struct st7703 *ctx = mipi_dsi_get_drvdata(dsi);
> > + int ret;
> > +
> > + ret = drm_panel_unprepare(&ctx->panel);
> > + if (ret < 0)
> > + DRM_DEV_ERROR(&dsi->dev,
> > + "Failed to unprepare panel (%d)\n", ret);
> > +}
> > +
> > +static int st7703_remove(struct mipi_dsi_device *dsi)
> > +{
> > + struct st7703 *ctx = mipi_dsi_get_drvdata(dsi);
> > + int ret;
> > +
> > + st7703_shutdown(dsi);
> > +
> > + ret = mipi_dsi_detach(dsi);
> > + if (ret < 0)
> > + DRM_DEV_ERROR(&dsi->dev,
> > + "Failed to detach from DSI host (%d)\n", ret);
> > +
> > + drm_panel_remove(&ctx->panel);
> > +
> > + return 0;
> > +}
> > +
> > +static const struct of_device_id st7703_of_match[] = {
> > + { .compatible = "xingbangda,xbd599", .data = &xbd599_desc },
> > + { /* sentinel */ }
> > +};
> > +MODULE_DEVICE_TABLE(of, st7703_of_match);
> > +
> > +static struct mipi_dsi_driver st7703_driver = {
> > + .probe = st7703_probe,
> > + .remove = st7703_remove,
> > + .shutdown = st7703_shutdown,
> > + .driver = {
> > + .name = "st7703",
> > + .of_match_table = st7703_of_match,
> > + },
> > +};
> > +module_mipi_dsi_driver(st7703_driver);
> > +
> > +MODULE_AUTHOR("Icenowy Zheng <icen...@aosc.io>");
> > +MODULE_DESCRIPTION("DRM driver for Sitronix ST7703 MIPI DSI panel");
> > +MODULE_LICENSE("GPL v2");
> > --
> > 2.27.0
> >
> > _______________________________________________
> > dri-devel mailing list
> > dri-de...@lists.freedesktop.org
> > https://lists.freedesktop.org/mailman/listinfo/dri-devel
--
You received this message because you are subscribed to the Google Groups
"linux-sunxi" group.
To unsubscribe from this group and stop receiving emails from it, send an email
to linux-sunxi+unsubscr...@googlegroups.com.
To view this discussion on the web, visit
https://groups.google.com/d/msgid/linux-sunxi/20200620223010.fqjwijiixxkewk3p%40core.my.home.
