Re: [linux-sunxi] donate boards to kernelci

Hi,you can share hw and SW on usb-serial-power device Regards Il 02/feb/2016 10:32, "Benjamin Henrion" ha scritto: > Hi, > > We have some 40EUR left too much from the sunxi dinner, it was decided > to buy a Pine64 and donate it for the kernelci lab. > > There is also a need to

Re: [linux-sunxi] mainline uboot with sunxi-next kernel hangs for Olimex A20 Lime2

, On 31-12-14 18:16, Gerardo Di Iorio wrote: hi, 2014-11-15 17:22 GMT+01:00 Iain Paton ipat...@gmail.com: On 15/11/14 13:18, Vishnu Patekar wrote: Followed the steps mentioned at http://linux-sunxi.org/Mainline_Kernel_Howto I've enabled the DEBUG_LL, DEBUG_SUNXI_UART0 , still While

Re: [linux-sunxi] mainline uboot with sunxi-next kernel hangs for Olimex A20 Lime2

hi, 2014-11-15 17:22 GMT+01:00 Iain Paton ipat...@gmail.com: On 15/11/14 13:18, Vishnu Patekar wrote: Followed the steps mentioned at http://linux-sunxi.org/Mainline_Kernel_Howto I've enabled the DEBUG_LL, DEBUG_SUNXI_UART0 , still While booting it on Olimex A20-OLinuXino-Lime2

Re: [linux-sunxi] Re: sata multiplier with A20

these tests if possible. Is possible have this tests with same hd , but without PMP? regards Gerardo Di Iorio Tobias Am Donnerstag, 25. Dezember 2014 12:01:34 UTC+1 schrieb Tobias Andresen: Yes, thats right. Forgot this to mention. Our custom A20 board has always a port multiplier

Re: [linux-sunxi] Re: sata multiplier with A20

hi, you can report the speed transfer with sata pm? regards 2014-12-23 22:03 GMT+01:00 tandresen1...@gmail.com: The A20 supports PMP, just remove the Flag AHCI_HFLAG_NO_PMP in the sunxi ahci driver. Please take a look in the Manual of the A20 (6.15.1). The SATA interface has the following

Re: [linux-sunxi] Re: Is it possible to select kernel on boot ?

hi, with uboot mainline uboot you can use menu like lilo grub See the option extlinux My /boot/extlinux/extlinux.conf basically contains this: menu title LIME2 boot menu timeout 10 ontimeout linux LABEL linux KERNEL /boot/zImage fdt /boot/sun7i-a20-olinuxino-lime2.dtb

[linux-sunxi] uboot 2014.10

hi i try to use uboot 2014.10 from hans repo https://github.com/jwrdegoede/u-boot-sunxi branch next I have the first partion of sd card with boot folder and uEnv.txt file. But uboot not read the file. Was is missing? board is cubie2 Regards Gerardo Di Iorio U-Boot SPL 2014.10-rc1-g7190869

[linux-sunxi] linux 3.15 on cubie1

Hi i have build the kernel for cubie2 and work fine. I try to use same kernel , but with different dtb for cubie1 But the kernel not boot! This is ths content of my uEnv.txt autoload=no bootargs=earlyprintk console=ttyS0,115200 root=/dev/mmcblk0p3 ro rootfstype=ext4 loglevel=8 rootwait

[linux-sunxi] [PATCH 3.4] sun7i_deconfig enable option for usable kernel

Enable in sun7i_deconfig option for an usable kernel I add nand,emac,ir,gpio,mmc Signed-off-by: Gerardo Di Iorio aret...@gmail.com --- arch/arm/configs/sun7i_defconfig | 8 1 file changed, 8 insertions(+) diff --git a/arch/arm/configs/sun7i_defconfig b/arch/arm/configs/sun7i_ defconfig

Re: [linux-sunxi] how to flash android in NAND without phonixsuite ..

On Wed, Feb 19, 2014 at 10:00:08PM -0800, Puneet B wrote: Hi all, I am using A20 humming bird board. i want to boot android from NAND. i booted android from sd card successfully. Good you can share you info on the wiki i want to know boot0 and boot1 , is it common for all A20 board.

[linux-sunxi] [PATCH] sun7i_deconfig add config option for an usable kernel I add Nand,emac,ir,gpio,mmc option

Signed-off-by: Gerardo Di Iorio aret...@gmail.com --- arch/arm/configs/sun7i_defconfig | 8 1 file changed, 8 insertions(+) diff --git a/arch/arm/configs/sun7i_defconfig b/arch/arm/configs/sun7i_defconfig index 44f9bf4..3de48e4 100644 --- a/arch/arm/configs/sun7i_defconfig +++ b/arch

Re: [linux-sunxi] Testing of Line In my A20 board.

hi punnet, try to see this docs http://docs.cubieboard.org/tutorials/common/begining_on_lubuntu section Headphone Jack 2014-02-13 12:51 GMT+01:00 Puneet B punit...@gmail.com: Hi, I have Line in connector in my A20 board. Now how can i test it. In my audio jack is working fine. Is i

[linux-sunxi] Re: [PATCH] ARM: sunxi: change the AllWinner A1X to sunxi

hi, 2014/1/15 Arnd Bergmann a...@arndb.de On Wednesday 15 January 2014 10:10:06 Maxime Ripard wrote: On Thu, Jan 09, 2014 at 04:34:04PM +0100, Gerardo Di Iorio wrote: Change the AllWinner A1X SOCs to Allwinner Sunxi SOCs Signed-off-by: Gerardo Di Iorio aret...@gmail.com

[linux-sunxi] [PATCH] ARM: sunxi: change the AllWinner A1X to sunxi

-- You received this message because you are subscribed to the Google Groups linux-sunxi group. To unsubscribe from this group and stop receiving emails from it, send an email to linux-sunxi+unsubscr...@googlegroups.com. For more options, visit https://groups.google.com/groups/opt_out.

[linux-sunxi] [PATCH] ARM: sunxi: change the AllWinner A1X to sunxi

Change the AllWinner A1X SOCs to Allwinner Sunxi SOCs Signed-off-by: Gerardo Di Iorio aret...@gmail.com --- arch/arm/mach-sunxi/Kconfig | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/arch/arm/mach-sunxi/Kconfig b/arch/arm/mach-sunxi/Kconfig index 547004c..adb2574 100644

Re: [linux-sunxi] Sd card partition for A20 booting...

hi, i have write the howto on wiki Boot Android from sd card. Is work fine for 4.0.4 I have test 4.2 for cubie2 but not work. I have on g+ comunity cubier this link http://docs.cubieboard.org/tutorials/ct1/installation/cb3_a20-android_boot_from_sata you can try next week i can try to fix