Updated H6 DT files are based on Linux 5.11-rc1 release.
Signed-off-by: Jernej Skrabec <jernej.skra...@siol.net>
---
arch/arm/dts/sun50i-h6-beelink-gs1.dts | 70 +++-
arch/arm/dts/sun50i-h6-cpu-opp.dtsi | 117 ++++++
arch/arm/dts/sun50i-h6-orangepi-lite2.dts | 71 +++-
arch/arm/dts/sun50i-h6-orangepi-one-plus.dts | 41 +-
arch/arm/dts/sun50i-h6-orangepi.dtsi | 72 +++-
arch/arm/dts/sun50i-h6-pine-h64.dts | 102 +++--
arch/arm/dts/sun50i-h6.dtsi | 394 +++++++++++++++++--
7 files changed, 794 insertions(+), 73 deletions(-)
create mode 100644 arch/arm/dts/sun50i-h6-cpu-opp.dtsi
diff --git a/arch/arm/dts/sun50i-h6-beelink-gs1.dts
b/arch/arm/dts/sun50i-h6-beelink-gs1.dts
index 0dc33c90dd60..7c9dbde645b5 100644
--- a/arch/arm/dts/sun50i-h6-beelink-gs1.dts
+++ b/arch/arm/dts/sun50i-h6-beelink-gs1.dts
@@ -1,11 +1,10 @@
-// SPDX-License-Identifier: (GPL-2.0+ or MIT)
-/*
- * Copyright (C) 2019 Clément Péron <peron.c...@gmail.com>
- */
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+// Copyright (C) 2019 Clément Péron <peron.c...@gmail.com>
/dts-v1/;
#include "sun50i-h6.dtsi"
+#include "sun50i-h6-cpu-opp.dtsi"
#include <dt-bindings/gpio/gpio.h>
@@ -25,6 +24,7 @@
connector {
compatible = "hdmi-connector";
type = "a";
+ ddc-en-gpios = <&pio 7 2 GPIO_ACTIVE_HIGH>; /* PH2 */
port {
hdmi_con_in: endpoint {
@@ -33,6 +33,13 @@
};
};
+ ext_osc32k: ext_osc32k_clk {
+ #clock-cells = <0>;
+ compatible = "fixed-clock";
+ clock-frequency = <32768>;
+ clock-output-names = "ext_osc32k";
+ };
+
leds {
compatible = "gpio-leds";
@@ -51,12 +58,38 @@
regulator-max-microvolt = <5000000>;
regulator-always-on;
};
+
+ sound-spdif {
+ compatible = "simple-audio-card";
+ simple-audio-card,name = "sun50i-h6-spdif";
+
+ simple-audio-card,cpu {
+ sound-dai = <&spdif>;
+ };
+
+ simple-audio-card,codec {
+ sound-dai = <&spdif_out>;
+ };
+ };
+
+ spdif_out: spdif-out {
+ #sound-dai-cells = <0>;
+ compatible = "linux,spdif-dit";
+ };
+};
+
+&cpu0 {
+ cpu-supply = <®_dcdca>;
};
&de {
status = "okay";
};
+&dwc3 {
+ status = "okay";
+};
+
&ehci0 {
status = "okay";
};
@@ -64,12 +97,17 @@
&emac {
pinctrl-names = "default";
pinctrl-0 = <&ext_rgmii_pins>;
- phy-mode = "rgmii";
+ phy-mode = "rgmii-id";
phy-handle = <&ext_rgmii_phy>;
phy-supply = <®_aldo2>;
status = "okay";
};
+&gpu {
+ mali-supply = <®_dcdcc>;
+ status = "okay";
+};
+
&hdmi {
status = "okay";
};
@@ -201,13 +239,16 @@
reg_dcdca: dcdca {
regulator-always-on;
regulator-min-microvolt = <810000>;
- regulator-max-microvolt = <1080000>;
+ regulator-max-microvolt = <1160000>;
+ regulator-ramp-delay = <2500>;
regulator-name = "vdd-cpu";
};
reg_dcdcc: dcdcc {
+ regulator-enable-ramp-delay = <32000>;
regulator-min-microvolt = <810000>;
regulator-max-microvolt = <1080000>;
+ regulator-ramp-delay = <2500>;
regulator-name = "vdd-gpu";
};
@@ -232,6 +273,11 @@
};
};
+&r_ir {
+ linux,rc-map-name = "rc-beelink-gs1";
+ status = "okay";
+};
+
&r_pio {
/*
* PL0 and PL1 are used for PMIC I2C
@@ -243,6 +289,14 @@
vcc-pm-supply = <®_aldo1>;
};
+&rtc {
+ clocks = <&ext_osc32k>;
+};
+
+&spdif {
+ status = "okay";
+};
+
&uart0 {
pinctrl-names = "default";
pinctrl-0 = <&uart0_ph_pins>;
@@ -258,3 +312,7 @@
usb0_vbus-supply = <®_vcc5v>;
status = "okay";
};
+
+&usb3phy {
+ status = "okay";
+};
diff --git a/arch/arm/dts/sun50i-h6-cpu-opp.dtsi
b/arch/arm/dts/sun50i-h6-cpu-opp.dtsi
new file mode 100644
index 000000000000..1a5eddc5a40f
--- /dev/null
+++ b/arch/arm/dts/sun50i-h6-cpu-opp.dtsi
@@ -0,0 +1,117 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+// Copyright (C) 2020 Ondrej Jirman <meg...@megous.com>
+// Copyright (C) 2020 Clément Péron <peron.c...@gmail.com>
+
+/ {
+ cpu_opp_table: cpu-opp-table {
+ compatible = "allwinner,sun50i-h6-operating-points";
+ nvmem-cells = <&cpu_speed_grade>;
+ opp-shared;
+
+ opp@480000000 {
+ clock-latency-ns = <244144>; /* 8 32k periods */
+ opp-hz = /bits/ 64 <480000000>;
+
+ opp-microvolt-speed0 = <880000 880000 1200000>;
+ opp-microvolt-speed1 = <820000 820000 1200000>;
+ opp-microvolt-speed2 = <820000 820000 1200000>;
+ };
+
+ opp@720000000 {
+ clock-latency-ns = <244144>; /* 8 32k periods */
+ opp-hz = /bits/ 64 <720000000>;
+
+ opp-microvolt-speed0 = <880000 880000 1200000>;
+ opp-microvolt-speed1 = <820000 820000 1200000>;
+ opp-microvolt-speed2 = <820000 820000 1200000>;
+ };
+
+ opp@816000000 {
+ clock-latency-ns = <244144>; /* 8 32k periods */
+ opp-hz = /bits/ 64 <816000000>;
+
+ opp-microvolt-speed0 = <880000 880000 1200000>;
+ opp-microvolt-speed1 = <820000 820000 1200000>;
+ opp-microvolt-speed2 = <820000 820000 1200000>;
+ };
+
+ opp@888000000 {
+ clock-latency-ns = <244144>; /* 8 32k periods */
+ opp-hz = /bits/ 64 <888000000>;
+
+ opp-microvolt-speed0 = <880000 880000 1200000>;
+ opp-microvolt-speed1 = <820000 820000 1200000>;
+ opp-microvolt-speed2 = <820000 820000 1200000>;
+ };
+
+ opp@1080000000 {
+ clock-latency-ns = <244144>; /* 8 32k periods */
+ opp-hz = /bits/ 64 <1080000000>;
+
+ opp-microvolt-speed0 = <940000 940000 1200000>;
+ opp-microvolt-speed1 = <880000 880000 1200000>;
+ opp-microvolt-speed2 = <880000 880000 1200000>;
+ };
+
+ opp@1320000000 {
+ clock-latency-ns = <244144>; /* 8 32k periods */
+ opp-hz = /bits/ 64 <1320000000>;
+
+ opp-microvolt-speed0 = <1000000 1000000 1200000>;
+ opp-microvolt-speed1 = <940000 940000 1200000>;
+ opp-microvolt-speed2 = <940000 940000 1200000>;
+ };
+
+ opp@1488000000 {
+ clock-latency-ns = <244144>; /* 8 32k periods */
+ opp-hz = /bits/ 64 <1488000000>;
+
+ opp-microvolt-speed0 = <1060000 1060000 1200000>;
+ opp-microvolt-speed1 = <1000000 1000000 1200000>;
+ opp-microvolt-speed2 = <1000000 1000000 1200000>;
+ };
+
+ opp@1608000000 {
+ clock-latency-ns = <244144>; /* 8 32k periods */
+ opp-hz = /bits/ 64 <1608000000>;
+
+ opp-microvolt-speed0 = <1090000 1090000 1200000>;
+ opp-microvolt-speed1 = <1030000 1030000 1200000>;
+ opp-microvolt-speed2 = <1030000 1030000 1200000>;
+ };
+
+ opp@1704000000 {
+ clock-latency-ns = <244144>; /* 8 32k periods */
+ opp-hz = /bits/ 64 <1704000000>;
+
+ opp-microvolt-speed0 = <1120000 1120000 1200000>;
+ opp-microvolt-speed1 = <1060000 1060000 1200000>;
+ opp-microvolt-speed2 = <1060000 1060000 1200000>;
+ };
+
+ opp@1800000000 {
+ clock-latency-ns = <244144>; /* 8 32k periods */
+ opp-hz = /bits/ 64 <1800000000>;
+
+ opp-microvolt-speed0 = <1160000 1160000 1200000>;
+ opp-microvolt-speed1 = <1100000 1100000 1200000>;
+ opp-microvolt-speed2 = <1100000 1100000 1200000>;
+ };
+ };
+};
+
+&cpu0 {
+ operating-points-v2 = <&cpu_opp_table>;
+};
+
+&cpu1 {
+ operating-points-v2 = <&cpu_opp_table>;
+};
+
+&cpu2 {
+ operating-points-v2 = <&cpu_opp_table>;
+};
+
+&cpu3 {
+ operating-points-v2 = <&cpu_opp_table>;
+};
diff --git a/arch/arm/dts/sun50i-h6-orangepi-lite2.dts
b/arch/arm/dts/sun50i-h6-orangepi-lite2.dts
index e098a2475f2d..e8770858b5d0 100644
--- a/arch/arm/dts/sun50i-h6-orangepi-lite2.dts
+++ b/arch/arm/dts/sun50i-h6-orangepi-lite2.dts
@@ -1,11 +1,74 @@
-// SPDX-License-Identifier: (GPL-2.0+ or MIT)
-/*
- * Copyright (C) 2018 Jagan Teki <ja...@openedev.com>
- */
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+// Copyright (C) 2018 Jagan Teki <ja...@openedev.com>
#include "sun50i-h6-orangepi.dtsi"
/ {
model = "OrangePi Lite2";
compatible = "xunlong,orangepi-lite2", "allwinner,sun50i-h6";
+
+ aliases {
+ serial1 = &uart1; /* BT-UART */
+ };
+
+ wifi_pwrseq: wifi_pwrseq {
+ compatible = "mmc-pwrseq-simple";
+ clocks = <&rtc 1>;
+ clock-names = "ext_clock";
+ reset-gpios = <&r_pio 1 3 GPIO_ACTIVE_LOW>; /* PM3 */
+ post-power-on-delay-ms = <200>;
+ };
+};
+
+&mmc1 {
+ vmmc-supply = <®_cldo2>;
+ vqmmc-supply = <®_bldo3>;
+ mmc-pwrseq = <&wifi_pwrseq>;
+ bus-width = <4>;
+ non-removable;
+ status = "okay";
+
+ brcm: sdio-wifi@1 {
+ reg = <1>;
+ compatible = "brcm,bcm4329-fmac";
+ interrupt-parent = <&r_pio>;
+ interrupts = <1 0 IRQ_TYPE_LEVEL_LOW>; /* PM0 */
+ interrupt-names = "host-wake";
+ };
+};
+
+®_cldo2 {
+ /*
+ * This regulator is connected with CLDO3.
+ * Before the kernel can support synchronized
+ * enable of coupled regulators, keep them
+ * both always on as a ugly hack.
+ */
+ regulator-always-on;
+};
+
+®_cldo3 {
+ /*
+ * This regulator is connected with CLDO2.
+ * See the comments for CLDO2.
+ */
+ regulator-always-on;
+};
+
+/* There's the BT part of the AP6255 connected to that UART */
+&uart1 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&uart1_pins>, <&uart1_rts_cts_pins>;
+ uart-has-rtscts;
+ status = "okay";
+
+ bluetooth {
+ compatible = "brcm,bcm4345c5";
+ clocks = <&rtc 1>;
+ clock-names = "lpo";
+ device-wakeup-gpios = <&r_pio 1 2 GPIO_ACTIVE_HIGH>; /* PM2 */
+ host-wakeup-gpios = <&r_pio 1 1 GPIO_ACTIVE_HIGH>; /* PM1 */
+ shutdown-gpios = <&r_pio 1 4 GPIO_ACTIVE_HIGH>; /* PM4 */
+ max-speed = <1500000>;
+ };
};
diff --git a/arch/arm/dts/sun50i-h6-orangepi-one-plus.dts
b/arch/arm/dts/sun50i-h6-orangepi-one-plus.dts
index 12e17567ab56..29a081e72a9b 100644
--- a/arch/arm/dts/sun50i-h6-orangepi-one-plus.dts
+++ b/arch/arm/dts/sun50i-h6-orangepi-one-plus.dts
@@ -1,12 +1,43 @@
-// SPDX-License-Identifier: (GPL-2.0+ or MIT)
-/*
- * Copyright (C) 2018 Amarula Solutions
- * Author: Jagan Teki <ja...@amarulasolutions.com>
- */
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+// Copyright (C) 2018 Amarula Solutions
+// Author: Jagan Teki <ja...@amarulasolutions.com>
#include "sun50i-h6-orangepi.dtsi"
/ {
model = "OrangePi One Plus";
compatible = "xunlong,orangepi-one-plus", "allwinner,sun50i-h6";
+
+ aliases {
+ ethernet0 = &emac;
+ };
+
+ reg_gmac_3v3: gmac-3v3 {
+ compatible = "regulator-fixed";
+ regulator-name = "vcc-gmac-3v3";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ startup-delay-us = <100000>;
+ enable-active-high;
+ gpio = <&pio 3 6 GPIO_ACTIVE_HIGH>; /* PD6 */
+ vin-supply = <®_aldo2>;
+ };
+};
+
+&emac {
+ pinctrl-names = "default";
+ pinctrl-0 = <&ext_rgmii_pins>;
+ phy-mode = "rgmii-id";
+ phy-handle = <&ext_rgmii_phy>;
+ phy-supply = <®_gmac_3v3>;
+ allwinner,rx-delay-ps = <200>;
+ allwinner,tx-delay-ps = <200>;
+ status = "okay";
+};
+
+&mdio {
+ ext_rgmii_phy: ethernet-phy@1 {
+ compatible = "ethernet-phy-ieee802.3-c22";
+ reg = <1>;
+ };
};
diff --git a/arch/arm/dts/sun50i-h6-orangepi.dtsi
b/arch/arm/dts/sun50i-h6-orangepi.dtsi
index 62e27948a3fa..ebc120a9232f 100644
--- a/arch/arm/dts/sun50i-h6-orangepi.dtsi
+++ b/arch/arm/dts/sun50i-h6-orangepi.dtsi
@@ -1,8 +1,6 @@
-// SPDX-License-Identifier: (GPL-2.0+ or MIT)
-/*
- * Copyright (C) 2018 Amarula Solutions
- * Author: Jagan Teki <ja...@amarulasolutions.com>
- */
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+// Copyright (C) 2018 Amarula Solutions
+// Author: Jagan Teki <ja...@amarulasolutions.com>
/dts-v1/;
@@ -22,6 +20,25 @@
stdout-path = "serial0:115200n8";
};
+ connector {
+ compatible = "hdmi-connector";
+ type = "a";
+ ddc-en-gpios = <&pio 7 2 GPIO_ACTIVE_HIGH>; /* PH2 */
+
+ port {
+ hdmi_con_in: endpoint {
+ remote-endpoint = <&hdmi_out_con>;
+ };
+ };
+ };
+
+ ext_osc32k: ext_osc32k_clk {
+ #clock-cells = <0>;
+ compatible = "fixed-clock";
+ clock-frequency = <32768>;
+ clock-output-names = "ext_osc32k";
+ };
+
leds {
compatible = "gpio-leds";
@@ -47,6 +64,10 @@
};
};
+&de {
+ status = "okay";
+};
+
&ehci0 {
status = "okay";
};
@@ -55,6 +76,21 @@
status = "okay";
};
+&gpu {
+ mali-supply = <®_dcdcc>;
+ status = "okay";
+};
+
+&hdmi {
+ status = "okay";
+};
+
+&hdmi_out {
+ hdmi_out_con: endpoint {
+ remote-endpoint = <&hdmi_con_in>;
+ };
+};
+
&mmc0 {
vmmc-supply = <®_cldo1>;
cd-gpios = <&pio 5 6 GPIO_ACTIVE_LOW>;
@@ -70,6 +106,12 @@
status = "okay";
};
+&pio {
+ vcc-pc-supply = <®_bldo2>;
+ vcc-pd-supply = <®_cldo1>;
+ vcc-pg-supply = <®_aldo1>;
+};
+
&r_i2c {
status = "okay";
@@ -163,6 +205,7 @@
};
reg_dcdcc: dcdcc {
+ regulator-enable-ramp-delay = <32000>;
regulator-min-microvolt = <810000>;
regulator-max-microvolt = <1080000>;
regulator-name = "vdd-gpu";
@@ -189,6 +232,18 @@
};
};
+&r_ir {
+ status = "okay";
+};
+
+&r_pio {
+ vcc-pm-supply = <®_bldo3>;
+};
+
+&rtc {
+ clocks = <&ext_osc32k>;
+};
+
&uart0 {
pinctrl-names = "default";
pinctrl-0 = <&uart0_ph_pins>;
@@ -196,7 +251,12 @@
};
&usb2otg {
- dr_mode = "otg";
+ /*
+ * OrangePi Lite 2 and One Plus, where this DT is used, don't
+ * have a controllable VBUS even though they do have an ID pin.
+ * Using it as anything but a USB host is unsafe.
+ */
+ dr_mode = "host";
status = "okay";
};
diff --git a/arch/arm/dts/sun50i-h6-pine-h64.dts
b/arch/arm/dts/sun50i-h6-pine-h64.dts
index 189834518391..961732c52aa0 100644
--- a/arch/arm/dts/sun50i-h6-pine-h64.dts
+++ b/arch/arm/dts/sun50i-h6-pine-h64.dts
@@ -1,30 +1,38 @@
-// SPDX-License-Identifier: (GPL-2.0+ or MIT)
-/*
- * Copyright (c) 2017 Icenowy Zheng <icen...@aosc.io>
- */
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+// Copyright (c) 2017 Icenowy Zheng <icen...@aosc.io>
/dts-v1/;
#include "sun50i-h6.dtsi"
+#include "sun50i-h6-cpu-opp.dtsi"
#include <dt-bindings/gpio/gpio.h>
/ {
- model = "Pine H64";
+ model = "Pine H64 model A";
compatible = "pine64,pine-h64", "allwinner,sun50i-h6";
aliases {
ethernet0 = &emac;
serial0 = &uart0;
+ spi0 = &spi0;
};
chosen {
stdout-path = "serial0:115200n8";
};
- connector {
+ ext_osc32k: ext_osc32k_clk {
+ #clock-cells = <0>;
+ compatible = "fixed-clock";
+ clock-frequency = <32768>;
+ clock-output-names = "ext_osc32k";
+ };
+
+ hdmi_connector: connector {
compatible = "hdmi-connector";
type = "a";
+ ddc-en-gpios = <&pio 7 2 GPIO_ACTIVE_HIGH>; /* PH2 */
port {
hdmi_con_in: endpoint {
@@ -52,6 +60,16 @@
};
};
+ reg_gmac_3v3: gmac-3v3 {
+ compatible = "regulator-fixed";
+ regulator-name = "vcc-gmac-3v3";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ startup-delay-us = <100000>;
+ gpio = <&pio 2 16 GPIO_ACTIVE_HIGH>;
+ enable-active-high;
+ };
+
reg_usb_vbus: vbus {
compatible = "regulator-fixed";
regulator-name = "usb-vbus";
@@ -63,25 +81,35 @@
};
};
+&cpu0 {
+ cpu-supply = <®_dcdca>;
+};
+
+&de {
+ status = "okay";
+};
+
+&ehci0 {
+ status = "okay";
+};
+
+&ehci3 {
+ status = "okay";
+};
+
&emac {
pinctrl-names = "default";
pinctrl-0 = <&ext_rgmii_pins>;
- phy-mode = "rgmii";
+ phy-mode = "rgmii-id";
phy-handle = <&ext_rgmii_phy>;
- phy-supply = <®_aldo2>;
+ phy-supply = <®_gmac_3v3>;
allwinner,rx-delay-ps = <200>;
allwinner,tx-delay-ps = <200>;
status = "okay";
};
-&mdio {
- ext_rgmii_phy: ethernet-phy@1 {
- compatible = "ethernet-phy-ieee802.3-c22";
- reg = <1>;
- };
-};
-
-&de {
+&gpu {
+ mali-supply = <®_dcdcc>;
status = "okay";
};
@@ -95,12 +123,11 @@
};
};
-&ehci0 {
- status = "okay";
-};
-
-&ehci3 {
- status = "okay";
+&mdio {
+ ext_rgmii_phy: ethernet-phy@1 {
+ compatible = "ethernet-phy-ieee802.3-c22";
+ reg = <1>;
+ };
};
&mmc0 {
@@ -216,13 +243,16 @@
reg_dcdca: dcdca {
regulator-always-on;
regulator-min-microvolt = <810000>;
- regulator-max-microvolt = <1080000>;
+ regulator-max-microvolt = <1160000>;
+ regulator-ramp-delay = <2500>;
regulator-name = "vdd-cpu";
};
reg_dcdcc: dcdcc {
+ regulator-enable-ramp-delay = <32000>;
regulator-min-microvolt = <810000>;
regulator-max-microvolt = <1080000>;
+ regulator-ramp-delay = <2500>;
regulator-name = "vdd-gpu";
};
@@ -255,10 +285,36 @@
};
};
+&r_ir {
+ status = "okay";
+};
+
&r_pio {
vcc-pm-supply = <®_aldo1>;
};
+&rtc {
+ clocks = <&ext_osc32k>;
+};
+
+/*
+ * The CS pin is shared with the MMC2 CMD pin, so we cannot have the SPI
+ * flash and eMMC at the same time, as one of them would fail probing.
+ * Disable SPI0 in here, to prefer the more useful eMMC. U-Boot can
+ * fix this up in no eMMC is connected.
+ */
+&spi0 {
+ pinctrl-0 = <&spi0_pins>, <&spi0_cs_pin>;
+ pinctrl-names = "default";
+ status = "disabled";
+
+ flash@0 {
+ compatible = "winbond,w25q128", "jedec,spi-nor";
+ reg = <0>;
+ spi-max-frequency = <4000000>;
+ };
+};
+
&uart0 {
pinctrl-names = "default";
pinctrl-0 = <&uart0_ph_pins>;
diff --git a/arch/arm/dts/sun50i-h6.dtsi b/arch/arm/dts/sun50i-h6.dtsi
index a117f479ae55..8a62a9fbe347 100644
--- a/arch/arm/dts/sun50i-h6.dtsi
+++ b/arch/arm/dts/sun50i-h6.dtsi
@@ -1,7 +1,5 @@
-// SPDX-License-Identifier: (GPL-2.0+ or MIT)
-/*
- * Copyright (C) 2017 Icenowy Zheng <icen...@aosc.io>
- */
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+// Copyright (C) 2017 Icenowy Zheng <icen...@aosc.io>
#include <dt-bindings/interrupt-controller/arm-gic.h>
#include <dt-bindings/clock/sun50i-h6-ccu.h>
@@ -11,6 +9,7 @@
#include <dt-bindings/reset/sun50i-h6-ccu.h>
#include <dt-bindings/reset/sun50i-h6-r-ccu.h>
#include <dt-bindings/reset/sun8i-de2.h>
+#include <dt-bindings/thermal/thermal.h>
/ {
interrupt-parent = <&gic>;
@@ -26,6 +25,9 @@
device_type = "cpu";
reg = <0>;
enable-method = "psci";
+ clocks = <&ccu CLK_CPUX>;
+ clock-latency-ns = <244144>; /* 8 32k periods */
+ #cooling-cells = <2>;
};
cpu1: cpu@1 {
@@ -33,6 +35,9 @@
device_type = "cpu";
reg = <1>;
enable-method = "psci";
+ clocks = <&ccu CLK_CPUX>;
+ clock-latency-ns = <244144>; /* 8 32k periods */
+ #cooling-cells = <2>;
};
cpu2: cpu@2 {
@@ -40,6 +45,9 @@
device_type = "cpu";
reg = <2>;
enable-method = "psci";
+ clocks = <&ccu CLK_CPUX>;
+ clock-latency-ns = <244144>; /* 8 32k periods */
+ #cooling-cells = <2>;
};
cpu3: cpu@3 {
@@ -47,6 +55,9 @@
device_type = "cpu";
reg = <3>;
enable-method = "psci";
+ clocks = <&ccu CLK_CPUX>;
+ clock-latency-ns = <244144>; /* 8 32k periods */
+ #cooling-cells = <2>;
};
};
@@ -56,14 +67,6 @@
status = "disabled";
};
- iosc: internal-osc-clk {
- #clock-cells = <0>;
- compatible = "fixed-clock";
- clock-frequency = <16000000>;
- clock-accuracy = <300000000>;
- clock-output-names = "iosc";
- };
-
osc24M: osc24M_clk {
#clock-cells = <0>;
compatible = "fixed-clock";
@@ -71,11 +74,13 @@
clock-output-names = "osc24M";
};
- osc32k: osc32k_clk {
- #clock-cells = <0>;
- compatible = "fixed-clock";
- clock-frequency = <32768>;
- clock-output-names = "osc32k";
+ pmu {
+ compatible = "arm,cortex-a53-pmu";
+ interrupts = <GIC_SPI 140 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 141 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 142 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 143 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-affinity = <&cpu0>, <&cpu1>, <&cpu2>, <&cpu3>;
};
psci {
@@ -85,6 +90,7 @@
timer {
compatible = "arm,armv8-timer";
+ arm,no-tick-in-suspend;
interrupts = <GIC_PPI 13
(GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_HIGH)>,
<GIC_PPI 14
@@ -130,6 +136,7 @@
clock-names = "bus",
"mod";
resets = <&display_clocks RST_MIXER0>;
+ iommus = <&iommu 0>;
ports {
#address-cells = <1>;
@@ -155,6 +162,30 @@
resets = <&ccu RST_BUS_VE>;
interrupts = <GIC_SPI 89 IRQ_TYPE_LEVEL_HIGH>;
allwinner,sram = <&ve_sram 1>;
+ iommus = <&iommu 3>;
+ };
+
+ gpu: gpu@1800000 {
+ compatible = "allwinner,sun50i-h6-mali",
+ "arm,mali-t720";
+ reg = <0x01800000 0x4000>;
+ interrupts = <GIC_SPI 84 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 85 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 83 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-names = "job", "mmu", "gpu";
+ clocks = <&ccu CLK_GPU>, <&ccu CLK_BUS_GPU>;
+ clock-names = "core", "bus";
+ resets = <&ccu RST_BUS_GPU>;
+ status = "disabled";
+ };
+
+ crypto: crypto@1904000 {
+ compatible = "allwinner,sun50i-h6-crypto";
+ reg = <0x01904000 0x1000>;
+ interrupts = <GIC_SPI 87 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&ccu CLK_BUS_CE>, <&ccu CLK_CE>, <&ccu
CLK_MBUS_CE>;
+ clock-names = "bus", "mod", "ram";
+ resets = <&ccu RST_BUS_CE>;
};
syscon: syscon@3000000 {
@@ -197,7 +228,7 @@
ccu: clock@3001000 {
compatible = "allwinner,sun50i-h6-ccu";
reg = <0x03001000 0x1000>;
- clocks = <&osc24M>, <&osc32k>, <&iosc>;
+ clocks = <&osc24M>, <&rtc 0>, <&rtc 2>;
clock-names = "hosc", "losc", "iosc";
#clock-cells = <1>;
#reset-cells = <1>;
@@ -215,9 +246,29 @@
#dma-cells = <1>;
};
- sid: sid@3006000 {
+ msgbox: mailbox@3003000 {
+ compatible = "allwinner,sun50i-h6-msgbox",
+ "allwinner,sun6i-a31-msgbox";
+ reg = <0x03003000 0x1000>;
+ clocks = <&ccu CLK_BUS_MSGBOX>;
+ resets = <&ccu RST_BUS_MSGBOX>;
+ interrupts = <GIC_SPI 44 IRQ_TYPE_LEVEL_HIGH>;
+ #mbox-cells = <1>;
+ };
+
+ sid: efuse@3006000 {
compatible = "allwinner,sun50i-h6-sid";
reg = <0x03006000 0x400>;
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ ths_calibration: thermal-sensor-calibration@14 {
+ reg = <0x14 0x8>;
+ };
+
+ cpu_speed_grade: cpu-speed-grade@1c {
+ reg = <0x1c 0x4>;
+ };
};
watchdog: watchdog@30090a0 {
@@ -225,10 +276,21 @@
"allwinner,sun6i-a31-wdt";
reg = <0x030090a0 0x20>;
interrupts = <GIC_SPI 50 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&osc24M>;
/* Broken on some H6 boards */
status = "disabled";
};
+ pwm: pwm@300a000 {
+ compatible = "allwinner,sun50i-h6-pwm";
+ reg = <0x0300a000 0x400>;
+ clocks = <&osc24M>, <&ccu CLK_BUS_PWM>;
+ clock-names = "mod", "bus";
+ resets = <&ccu RST_BUS_PWM>;
+ #pwm-cells = <3>;
+ status = "disabled";
+ };
+
pio: pinctrl@300b000 {
compatible = "allwinner,sun50i-h6-pinctrl";
reg = <0x0300b000 0x400>;
@@ -236,7 +298,7 @@
<GIC_SPI 53 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 54 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 59 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&ccu CLK_APB1>, <&osc24M>, <&osc32k>;
+ clocks = <&ccu CLK_APB1>, <&osc24M>, <&rtc 0>;
clock-names = "apb", "hosc", "losc";
gpio-controller;
#gpio-cells = <3>;
@@ -256,6 +318,21 @@
function = "hdmi";
};
+ i2c0_pins: i2c0-pins {
+ pins = "PD25", "PD26";
+ function = "i2c0";
+ };
+
+ i2c1_pins: i2c1-pins {
+ pins = "PH5", "PH6";
+ function = "i2c1";
+ };
+
+ i2c2_pins: i2c2-pins {
+ pins = "PD23", "PD24";
+ function = "i2c2";
+ };
+
mmc0_pins: mmc0-pins {
pins = "PF0", "PF1", "PF2", "PF3",
"PF4", "PF5";
@@ -264,10 +341,7 @@
bias-pull-up;
};
- /*
- * /omit-if-no-ref/ isn't supported by U-boot
- * keep this comment to avoid bad sync with Linux
- */
+ /omit-if-no-ref/
mmc1_pins: mmc1-pins {
pins = "PG0", "PG1", "PG2", "PG3",
"PG4", "PG5";
@@ -285,10 +359,50 @@
bias-pull-up;
};
+ /omit-if-no-ref/
+ spi0_pins: spi0-pins {
+ pins = "PC0", "PC2", "PC3";
+ function = "spi0";
+ };
+
+ /* pin shared with MMC2-CMD (eMMC) */
+ /omit-if-no-ref/
+ spi0_cs_pin: spi0-cs-pin {
+ pins = "PC5";
+ function = "spi0";
+ };
+
+ /omit-if-no-ref/
+ spi1_pins: spi1-pins {
+ pins = "PH4", "PH5", "PH6";
+ function = "spi1";
+ };
+
+ /omit-if-no-ref/
+ spi1_cs_pin: spi1-cs-pin {
+ pins = "PH3";
+ function = "spi1";
+ };
+
+ spdif_tx_pin: spdif-tx-pin {
+ pins = "PH7";
+ function = "spdif";
+ };
+
uart0_ph_pins: uart0-ph-pins {
pins = "PH0", "PH1";
function = "uart0";
};
+
+ uart1_pins: uart1-pins {
+ pins = "PG6", "PG7";
+ function = "uart1";
+ };
+
+ uart1_rts_cts_pins: uart1-rts-cts-pins {
+ pins = "PG8", "PG9";
+ function = "uart1";
+ };
};
gic: interrupt-controller@3021000 {
@@ -302,6 +416,15 @@
#interrupt-cells = <3>;
};
+ iommu: iommu@30f0000 {
+ compatible = "allwinner,sun50i-h6-iommu";
+ reg = <0x030f0000 0x10000>;
+ interrupts = <GIC_SPI 57 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&ccu CLK_BUS_IOMMU>;
+ resets = <&ccu RST_BUS_IOMMU>;
+ #iommu-cells = <1>;
+ };
+
mmc0: mmc@4020000 {
compatible = "allwinner,sun50i-h6-mmc",
"allwinner,sun50i-a64-mmc";
@@ -394,6 +517,78 @@
status = "disabled";
};
+ i2c0: i2c@5002000 {
+ compatible = "allwinner,sun50i-h6-i2c",
+ "allwinner,sun6i-a31-i2c";
+ reg = <0x05002000 0x400>;
+ interrupts = <GIC_SPI 4 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&ccu CLK_BUS_I2C0>;
+ resets = <&ccu RST_BUS_I2C0>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&i2c0_pins>;
+ status = "disabled";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ };
+
+ i2c1: i2c@5002400 {
+ compatible = "allwinner,sun50i-h6-i2c",
+ "allwinner,sun6i-a31-i2c";
+ reg = <0x05002400 0x400>;
+ interrupts = <GIC_SPI 5 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&ccu CLK_BUS_I2C1>;
+ resets = <&ccu RST_BUS_I2C1>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&i2c1_pins>;
+ status = "disabled";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ };
+
+ i2c2: i2c@5002800 {
+ compatible = "allwinner,sun50i-h6-i2c",
+ "allwinner,sun6i-a31-i2c";
+ reg = <0x05002800 0x400>;
+ interrupts = <GIC_SPI 6 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&ccu CLK_BUS_I2C2>;
+ resets = <&ccu RST_BUS_I2C2>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&i2c2_pins>;
+ status = "disabled";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ };
+
+ spi0: spi@5010000 {
+ compatible = "allwinner,sun50i-h6-spi",
+ "allwinner,sun8i-h3-spi";
+ reg = <0x05010000 0x1000>;
+ interrupts = <GIC_SPI 10 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&ccu CLK_BUS_SPI0>, <&ccu CLK_SPI0>;
+ clock-names = "ahb", "mod";
+ dmas = <&dma 22>, <&dma 22>;
+ dma-names = "rx", "tx";
+ resets = <&ccu RST_BUS_SPI0>;
+ status = "disabled";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ };
+
+ spi1: spi@5011000 {
+ compatible = "allwinner,sun50i-h6-spi",
+ "allwinner,sun8i-h3-spi";
+ reg = <0x05011000 0x1000>;
+ interrupts = <GIC_SPI 11 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&ccu CLK_BUS_SPI1>, <&ccu CLK_SPI1>;
+ clock-names = "ahb", "mod";
+ dmas = <&dma 23>, <&dma 23>;
+ dma-names = "rx", "tx";
+ resets = <&ccu RST_BUS_SPI1>;
+ status = "disabled";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ };
+
emac: ethernet@5020000 {
compatible = "allwinner,sun50i-h6-emac",
"allwinner,sun50i-a64-emac";
@@ -414,6 +609,34 @@
};
};
+ i2s1: i2s@5091000 {
+ #sound-dai-cells = <0>;
+ compatible = "allwinner,sun50i-h6-i2s";
+ reg = <0x05091000 0x1000>;
+ interrupts = <GIC_SPI 19 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&ccu CLK_BUS_I2S1>, <&ccu CLK_I2S1>;
+ clock-names = "apb", "mod";
+ dmas = <&dma 4>, <&dma 4>;
+ resets = <&ccu RST_BUS_I2S1>;
+ dma-names = "rx", "tx";
+ status = "disabled";
+ };
+
+ spdif: spdif@5093000 {
+ #sound-dai-cells = <0>;
+ compatible = "allwinner,sun50i-h6-spdif";
+ reg = <0x05093000 0x400>;
+ interrupts = <GIC_SPI 21 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&ccu CLK_BUS_SPDIF>, <&ccu CLK_SPDIF>;
+ clock-names = "apb", "spdif";
+ resets = <&ccu RST_BUS_SPDIF>;
+ dmas = <&dma 2>;
+ dma-names = "tx";
+ pinctrl-names = "default";
+ pinctrl-0 = <&spdif_tx_pin>;
+ status = "disabled";
+ };
+
usb2otg: usb@5100000 {
compatible = "allwinner,sun50i-h6-musb",
"allwinner,sun8i-a33-musb";
@@ -470,6 +693,38 @@
status = "disabled";
};
+ dwc3: usb@5200000 {
+ compatible = "snps,dwc3";
+ reg = <0x05200000 0x10000>;
+ interrupts = <GIC_SPI 26 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&ccu CLK_BUS_XHCI>,
+ <&ccu CLK_BUS_XHCI>,
+ <&rtc 0>;
+ clock-names = "ref", "bus_early", "suspend";
+ resets = <&ccu RST_BUS_XHCI>;
+ /*
+ * The datasheet of the chip doesn't declare the
+ * peripheral function, and there's no boards known
+ * to have a USB Type-B port routed to the port.
+ * In addition, no one has tested the peripheral
+ * function yet.
+ * So set the dr_mode to "host" in the DTSI file.
+ */
+ dr_mode = "host";
+ phys = <&usb3phy>;
+ phy-names = "usb3-phy";
+ status = "disabled";
+ };
+
+ usb3phy: phy@5210000 {
+ compatible = "allwinner,sun50i-h6-usb3-phy";
+ reg = <0x5210000 0x10000>;
+ clocks = <&ccu CLK_USB_PHY1>;
+ resets = <&ccu RST_USB_PHY1>;
+ #phy-cells = <0>;
+ status = "disabled";
+ };
+
ehci3: usb@5311000 {
compatible = "allwinner,sun50i-h6-ehci", "generic-ehci";
reg = <0x05311000 0x100>;
@@ -480,6 +735,7 @@
resets = <&ccu RST_BUS_OHCI3>,
<&ccu RST_BUS_EHCI3>;
phys = <&usb2phy 3>;
+ phy-names = "usb";
status = "disabled";
};
@@ -491,6 +747,7 @@
<&ccu CLK_USB_OHCI3>;
resets = <&ccu RST_BUS_OHCI3>;
phys = <&usb2phy 3>;
+ phy-names = "usb";
status = "disabled";
};
@@ -507,7 +764,7 @@
resets = <&ccu RST_BUS_HDMI_SUB>, <&ccu RST_BUS_HDCP>;
reset-names = "ctrl", "hdcp";
phys = <&hdmi_phy>;
- phy-names = "hdmi-phy";
+ phy-names = "phy";
pinctrl-names = "default";
pinctrl-0 = <&hdmi_pins>;
status = "disabled";
@@ -549,7 +806,6 @@
"tcon-tv0";
clock-output-names = "tcon-top-tv0";
resets = <&ccu RST_BUS_TCON_TOP>;
- reset-names = "rst";
#clock-cells = <1>;
ports {
@@ -636,10 +892,19 @@
};
};
+ rtc: rtc@7000000 {
+ compatible = "allwinner,sun50i-h6-rtc";
+ reg = <0x07000000 0x400>;
+ interrupts = <GIC_SPI 101 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 102 IRQ_TYPE_LEVEL_HIGH>;
+ clock-output-names = "osc32k", "osc32k-out", "iosc";
+ #clock-cells = <1>;
+ };
+
r_ccu: clock@7010000 {
compatible = "allwinner,sun50i-h6-r-ccu";
reg = <0x07010000 0x400>;
- clocks = <&osc24M>, <&osc32k>, <&iosc>,
+ clocks = <&osc24M>, <&rtc 0>, <&rtc 2>,
<&ccu CLK_PLL_PERIPH0>;
clock-names = "hosc", "losc", "iosc", "pll-periph";
#clock-cells = <1>;
@@ -651,6 +916,7 @@
"allwinner,sun6i-a31-wdt";
reg = <0x07020400 0x20>;
interrupts = <GIC_SPI 103 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&osc24M>;
};
r_intc: interrupt-controller@7021000 {
@@ -667,7 +933,7 @@
reg = <0x07022000 0x400>;
interrupts = <GIC_SPI 105 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 111 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&r_ccu CLK_R_APB1>, <&osc24M>, <&osc32k>;
+ clocks = <&r_ccu CLK_R_APB1>, <&osc24M>, <&rtc 0>;
clock-names = "apb", "hosc", "losc";
gpio-controller;
#gpio-cells = <3>;
@@ -678,10 +944,30 @@
pins = "PL0", "PL1";
function = "s_i2c";
};
+
+ r_ir_rx_pin: r-ir-rx-pin {
+ pins = "PL9";
+ function = "s_cir_rx";
+ };
+ };
+
+ r_ir: ir@7040000 {
+ compatible = "allwinner,sun50i-h6-ir",
+ "allwinner,sun6i-a31-ir";
+ reg = <0x07040000 0x400>;
+ interrupts = <GIC_SPI 109 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&r_ccu CLK_R_APB1_IR>,
+ <&r_ccu CLK_IR>;
+ clock-names = "apb", "ir";
+ resets = <&r_ccu RST_R_APB1_IR>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&r_ir_rx_pin>;
+ status = "disabled";
};
r_i2c: i2c@7081400 {
- compatible = "allwinner,sun6i-a31-i2c";
+ compatible = "allwinner,sun50i-h6-i2c",
+ "allwinner,sun6i-a31-i2c";
reg = <0x07081400 0x400>;
interrupts = <GIC_SPI 107 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&r_ccu CLK_R_APB2_I2C>;
@@ -692,5 +978,55 @@
#address-cells = <1>;
#size-cells = <0>;
};
+
+ ths: thermal-sensor@5070400 {
+ compatible = "allwinner,sun50i-h6-ths";
+ reg = <0x05070400 0x100>;
+ interrupts = <GIC_SPI 15 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&ccu CLK_BUS_THS>;
+ clock-names = "bus";
+ resets = <&ccu RST_BUS_THS>;
+ nvmem-cells = <&ths_calibration>;
+ nvmem-cell-names = "calibration";
+ #thermal-sensor-cells = <1>;
+ };
+ };
+
+ thermal-zones {
+ cpu-thermal {
+ polling-delay-passive = <0>;
+ polling-delay = <0>;
+ thermal-sensors = <&ths 0>;
+
+ trips {
+ cpu_alert: cpu-alert {
+ temperature = <85000>;
+ hysteresis = <2000>;
+ type = "passive";
+ };
+
+ cpu-crit {
+ temperature = <100000>;
+ hysteresis = <0>;
+ type = "critical";
+ };
+ };
+
+ cooling-maps {
+ map0 {
+ trip = <&cpu_alert>;
+ cooling-device = <&cpu0
THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+ <&cpu1
THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+ <&cpu2
THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+ <&cpu3
THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
+ };
+ };
+ };
+
+ gpu-thermal {
+ polling-delay-passive = <0>;
+ polling-delay = <0>;
+ thermal-sensors = <&ths 1>;
+ };
};
};
--
2.30.0
--
You received this message because you are subscribed to the Google Groups
"linux-sunxi" group.
To unsubscribe from this group and stop receiving emails from it, send an email
to linux-sunxi+unsubscr...@googlegroups.com.
To view this discussion on the web, visit
https://groups.google.com/d/msgid/linux-sunxi/20210106170257.1304395-2-jernej.skrabec%40siol.net.
