On Tue, Jan 28, 2020 at 6:17 AM Andre Przywara <andre.przyw...@arm.com> wrote: > > This series enables the SPI booting feature for Allwinner R40 and H6 > SoCs. To achieve this, we enable our spl_spi_sunxi.c driver to deal > with those two SoCs. The R40 is pretty straightforward, as it just needs > its base address adjusted. This is prepared in patch 1/5 and finalised > in patch 3/5. > For the H6, on top of yet another different base address, the new clocks > and slightly different pinmux setup need to be cared for. > Patch 2/5 and 4/5 take care of that. > Patch 5/5 enables this feature for the Pine H64 board, which comes with > soldered SPI flash. > > This has been tested on the Pine H64 board and a Bananapi M2 Berry > (with SPI flash connected to the SPI0-PortC header pins). > For the existing SPI boot platforms this does not change the code size, > as the toolchain is clever enough to optimise this properly. > > There is a similar series to enable SPI support for the sunxi-fel tool, > which was used to test this: > https://github.com/linux-sunxi/sunxi-tools/pull/129 > > Cheers, > Andre. > > Changelog v1 .. v2: > - Drop already merged patch 1/6 > - rename is_new_gen_spi() to is_sun6i_gen_spi()
Applied to u-boot-sunxi/master -- You received this message because you are subscribed to the Google Groups "linux-sunxi" group. To unsubscribe from this group and stop receiving emails from it, send an email to linux-sunxi+unsubscr...@googlegroups.com. To view this discussion on the web, visit https://groups.google.com/d/msgid/linux-sunxi/CAMty3ZDs610QQC_qqnY5u2egOmCSw5FXRKPFwuTOzRwRuRuOZw%40mail.gmail.com.