On 18/11/2020 10:27, Icenowy Zheng wrote: > PineCube is an IP camera development kit released by Pine64. > > It comes with the following compoents: > > - A mainboard with Sochip S3 SoC, a 16MByte SPI Flash, AXP209 PMIC, > a power-only microUSB connector, a USB Type-A connector, a 10/100Mbps > Ethernet port and FPC connectors for camera and daughter board. > - An OV5640-based camera module which is connected to the parallel CSI > bus of the mainboard. > - A daughterboard with several buttons, a SD slot, some IR LEDs, a > microphone and a speaker connector. > > As the device tree is synchronized in a previous commit, just add it to > Makefile, create a new MAINTAINER item and provide a defconfig.
Thanks for the quick fix. I could now compile an image. > Signed-off-by: Icenowy Zheng <icen...@aosc.io> Reviewed-by: Andre Przywara <andre.przyw...@arm.com> Cheers, Andre > --- > Changes since v2: > - Add Makefile reference to DT. > Changes since v1: > - Dropped LDO3 quirk. > > arch/arm/dts/Makefile | 1 + > board/sunxi/MAINTAINERS | 5 +++++ > configs/pinecube_defconfig | 15 +++++++++++++++ > 3 files changed, 21 insertions(+) > create mode 100644 configs/pinecube_defconfig > > diff --git a/arch/arm/dts/Makefile b/arch/arm/dts/Makefile > index 7d1a369845..e6993733b0 100644 > --- a/arch/arm/dts/Makefile > +++ b/arch/arm/dts/Makefile > @@ -587,6 +587,7 @@ dtb-$(CONFIG_MACH_SUN8I_R40) += \ > sun8i-r40-bananapi-m2-ultra.dtb \ > sun8i-v40-bananapi-m2-berry.dtb > dtb-$(CONFIG_MACH_SUN8I_V3S) += \ > + sun8i-s3-pinecube.dtb \ > sun8i-v3s-licheepi-zero.dtb > dtb-$(CONFIG_MACH_SUN50I_H5) += \ > sun50i-h5-bananapi-m2-plus.dtb \ > diff --git a/board/sunxi/MAINTAINERS b/board/sunxi/MAINTAINERS > index d3755ae41a..735801ae1d 100644 > --- a/board/sunxi/MAINTAINERS > +++ b/board/sunxi/MAINTAINERS > @@ -440,6 +440,11 @@ M: Vasily Khoruzhick <anars...@gmail.com> > S: Maintained > F: configs/pinebook_defconfig > > +PINECUBE BOARD: > +M: Icenowy Zheng <icen...@aosc.io> > +S: Maintained > +F: configs/pinecube_defconfig > + > PINE64 BOARDS > M: Andre Przywara <andre.przyw...@arm.com> > S: Maintained > diff --git a/configs/pinecube_defconfig b/configs/pinecube_defconfig > new file mode 100644 > index 0000000000..a8c404f6b1 > --- /dev/null > +++ b/configs/pinecube_defconfig > @@ -0,0 +1,15 @@ > +CONFIG_ARM=y > +CONFIG_ARCH_SUNXI=y > +CONFIG_SPL=y > +CONFIG_MACH_SUN8I_V3S=y > +CONFIG_SUNXI_DRAM_DDR3_1333=y > +CONFIG_DRAM_CLK=504 > +CONFIG_DRAM_ODT_EN=y > +CONFIG_I2C0_ENABLE=y > +CONFIG_DEFAULT_DEVICE_TREE="sun8i-s3-pinecube" > +CONFIG_SPL_I2C_SUPPORT=y > +# CONFIG_NETDEVICES is not set > +CONFIG_AXP209_POWER=y > +CONFIG_AXP_DCDC2_VOLT=1250 > +CONFIG_AXP_DCDC3_VOLT=3300 > +CONFIG_CONS_INDEX=3 > -- You received this message because you are subscribed to the Google Groups "linux-sunxi" group. To unsubscribe from this group and stop receiving emails from it, send an email to linux-sunxi+unsubscr...@googlegroups.com. To view this discussion on the web, visit https://groups.google.com/d/msgid/linux-sunxi/e06fae57-8630-9df0-31a7-e6def1b3d918%40arm.com.