On 03/01/2021 18:36, Jernej Skrabec wrote:
Hi,
> From: Andre Heider <a.hei...@gmail.com>
>
> Some Bluetooth controllers, like the BCM4345C5 of the Orange Pi 3,
> ship with the controller default address.
>
> Add a config option to fix it up so it can function properly.
>
> Signed-off-by: Andre Heider <a.hei...@gmail.com>
> Tested-by: Ondrej Jirman <meg...@megous.com>
> Acked-by: Maxime Ripard <mrip...@kernel.org>
> [rebased]
> Signed-off-by: Jernej Skrabec <jernej.skra...@siol.net>
> ---
> arch/arm/mach-sunxi/Kconfig | 11 +++++++++++
> board/sunxi/board.c | 34 ++++++++++++++++++++++++++++++++++
> 2 files changed, 45 insertions(+)
>
> diff --git a/arch/arm/mach-sunxi/Kconfig b/arch/arm/mach-sunxi/Kconfig
> index 49ef217f08c0..269aef5f01a1 100644
> --- a/arch/arm/mach-sunxi/Kconfig
> +++ b/arch/arm/mach-sunxi/Kconfig
> @@ -1016,4 +1016,15 @@ config PINEPHONE_DT_SELECTION
> Enable this option to automatically select the device tree for the
> correct PinePhone hardware revision during boot.
>
> +config FIXUP_BDADDR
This naming is a bit generic, and the BD in there is slightly confusing.
I understand that this is the official term used in Bluetooth land, but
it would be helpful to put this piece of context into the symbol name as
well. Especially since "bd" is used for "board" all over the place in
U-Boot.
Maybe stay closer to the actual content of the symbol, which is the DT
compatible *name*, and *not* an address? BLUETOOTH_DT_DEVICE_FIXUP or
the like?
> + string "Fixup the Bluetooth controller address"
> + default ""
> + help
> + This option specifies the DT compatible name of the Bluetooth
> + controller for which to set the "local-bd-address" property.
> + Set this option if your device ships with the Bluetooth controller
> + default address.
> + The used address is "bdaddr" if set, and "ethaddr" with the LSB
> + flipped elsewise.
> +
> endif
> diff --git a/board/sunxi/board.c b/board/sunxi/board.c
> index 4a29e351141b..d19119b7eb36 100644
> --- a/board/sunxi/board.c
> +++ b/board/sunxi/board.c
> @@ -908,6 +908,38 @@ int misc_init_r(void)
> return 0;
> }
>
> +static void fixup_bd_address(void *blob)
similar comment to the naming in this function, to avoid the "bd" in here.
The code itself looks fine, it's really just about the naming.
The variable names inside the function are fine, since the context is clear.
Thanks!
Andre
> +{
> + /* Some devices ship with a Bluetooth controller default address.
> + * Set a valid address through the device tree.
> + */
> + uchar tmp[ETH_ALEN], bdaddr[ETH_ALEN];
> + unsigned int sid[4];
> + int i;
> +
> + if (!CONFIG_FIXUP_BDADDR[0])
> + return;
> +
> + if (eth_env_get_enetaddr("bdaddr", tmp)) {
> + /* Convert between the binary formats of the corresponding
> stacks */
> + for (i = 0; i < ETH_ALEN; ++i)
> + bdaddr[i] = tmp[ETH_ALEN - i - 1];
> + } else {
> + if (!get_unique_sid(sid))
> + return;
> +
> + bdaddr[0] = ((sid[3] >> 0) & 0xff) ^ 1;
> + bdaddr[1] = (sid[3] >> 8) & 0xff;
> + bdaddr[2] = (sid[3] >> 16) & 0xff;
> + bdaddr[3] = (sid[3] >> 24) & 0xff;
> + bdaddr[4] = (sid[0] >> 0) & 0xff;
> + bdaddr[5] = 0x02;
> + }
> +
> + do_fixup_by_compat(blob, CONFIG_FIXUP_BDADDR,
> + "local-bd-address", bdaddr, ETH_ALEN, 1);
> +}
> +
> int ft_board_setup(void *blob, struct bd_info *bd)
> {
> int __maybe_unused r;
> @@ -918,6 +950,8 @@ int ft_board_setup(void *blob, struct bd_info *bd)
> */
> setup_environment(blob);
>
> + fixup_bd_address(blob);
> +
> #ifdef CONFIG_VIDEO_DT_SIMPLEFB
> r = sunxi_simplefb_setup(blob);
> if (r)
>
--
You received this message because you are subscribed to the Google Groups
"linux-sunxi" group.
To unsubscribe from this group and stop receiving emails from it, send an email
to linux-sunxi+unsubscr...@googlegroups.com.
To view this discussion on the web, visit
https://groups.google.com/d/msgid/linux-sunxi/c326e884-5343-da56-8dd3-6090d8125e94%40arm.com.
