Re: [linux-sunxi] Re: GSL3680 thread

2016-01-25 Thread Gregor Riepl
> It fails before FW loading as below. > > > Maybe you could do some testing with https://github.com/rastersoft/gsl1680 > and > see if you can get it working by skipping the GPIO stuff? > > > I did a try with Joe's one

Re: [linux-sunxi] Re: GSL3680 thread

2016-01-25 Thread 'destroyedlolo' via linux-sunxi
Le lundi 25 janvier 2016 19:06:53 UTC+1, Gregor Riepl a écrit : > > > According to the very limited knowledge I have about Silead controllers, > the > GSL3680 should have roughly the same interface as the GSL1680, even if it > doesn't have a control pin. That also applies to the firmware

Re: [linux-sunxi] Re: GSL3680 thread

2016-01-25 Thread Gregor Riepl
> The only information I found came from the datasheet I found on your site, I > have translated using Google and some Chinese friends. > Clearly, GSL1680's firmware loading procedure doesn't apply as the control pin > doesn't exists. > > So, for them moment, it's a dead end :( According to the

Re: [linux-sunxi] Re: GSL3680 thread

2016-01-23 Thread Priit Laes
On Sat, 2016-01-23 at 03:19 -0800, 'destroyedlolo' via linux-sunxi wrote: > Thanks for your reply. > > It's a Klipad HC-913 (http://linux-sunxi.org/MID-KLIPAD_HC-913). > The only information I found came from the datasheet I found on your > site, I have translated using Google and some Chinese

Re: [linux-sunxi] Re: GSL3680 thread

2016-01-23 Thread Priit Laes
On Fri, 2016-01-22 at 12:45 -0800, 'destroyedlolo' via linux-sunxi wrote: > Unfortunately, I got no response from the manufacturer after a week > ...  > No one on this forum  having this doc ? Probably no, please add any information you have under Silead section in our wiki: 

Re: [linux-sunxi] Re: GSL3680 thread

2016-01-23 Thread 'destroyedlolo' via linux-sunxi
Thanks for your reply. It's a Klipad HC-913 (http://linux-sunxi.org/MID-KLIPAD_HC-913). The only information I found came from the datasheet I found on your site, I have translated using Google and some Chinese friends. Clearly, GSL1680's firmware loading procedure doesn't apply as the control

[linux-sunxi] Re: GSL3680 thread

2016-01-22 Thread 'destroyedlolo' via linux-sunxi
Unfortunately, I got no response from the manufacturer after a week ... No one on this forum having this doc ? -- You received this message because you are subscribed to the Google Groups "linux-sunxi" group. To unsubscribe from this group and stop receiving emails from it, send an email to