[linux-sunxi] Re: [PATCH 01/14] ARM: dts: sun8i: Add SID node

2016-06-24 Thread Ondřej Jirman
Hello, thank you for the review. On 24.6.2016 04:41, Chen-Yu Tsai wrote: > On Fri, Jun 24, 2016 at 3:20 AM, wrote: >> From: Josef Gajdusek >> >> Add a node describing the Security ID memory to the Allwinner H3 .dtsi file. >> >> Signed-off-by: Josef Gajdusek

[linux-sunxi] Re: [PATCH v2 04/14] regulator: SY8106A regulator driver

2016-06-26 Thread Ondřej Jirman
On 26.6.2016 13:26, Mark Brown wrote: > On Sat, Jun 25, 2016 at 05:45:01AM +0200, meg...@megous.com wrote: >> From: Ondrej Jirman >> >> SY8106A is I2C attached single output voltage regulator >> made by Silergy. > > I'm missing almost all of this series, I've just got this and

[linux-sunxi] Re: [PATCH v2 05/14] dt-bindings: document SY8106A regulator driver

2016-06-26 Thread Ondřej Jirman
On 26.6.2016 13:27, Mark Brown wrote: > On Sat, Jun 25, 2016 at 05:45:02AM +0200, meg...@megous.com wrote: >> From: Ondrej Jirman >> >> This patch adds the binding documentation for the >> sy8106a regulator driver. > > Please submit patches using subject lines reflecting the

[linux-sunxi] Re: [PATCH 06/14] ARM: dts: sun8i: Add cpu0 label to sun8i-h3.dtsi

2016-06-24 Thread Ondřej Jirman
Hello, comments below. On 24.6.2016 05:48, Chen-Yu Tsai wrote: > On Fri, Jun 24, 2016 at 3:20 AM, wrote: >> From: Ondrej Jirman >> >> Add label to the first cpu so that it can be referenced >> from derived dts files. >> >> Signed-off-by: Ondrej Jirman

[linux-sunxi] Re: [PATCH 03/14] thermal: Add support for sun8i THS on Allwinner H3

2016-06-24 Thread Ondřej Jirman
On 24.6.2016 05:09, Chen-Yu Tsai wrote: >> +static int sun8i_ths_h3_init(struct platform_device *pdev, >> +struct sun8i_ths_data *data) >> +{ >> + int ret; >> + size_t callen; >> + s32 *caldata; >> + >> + data->busclk = devm_clk_get(>dev, "ahb");

[linux-sunxi] Re: [PATCH 07/14] regulator: SY8106A regulator driver

2016-06-24 Thread Ondřej Jirman
OR_WM8994) += wm8994-regulator.o >> - >> +obj-$(CONFIG_REGULATOR_SY8106A) += sy8106a-regulator.o > > Follow the existing ordering in the Makefile. > >> >> ccflags-$(CONFIG_REGULATOR_DEBUG) += -DDEBUG >> diff --git a/drivers/regulator/sy8106a-regulator.

[linux-sunxi] Re: [PATCH 03/14] thermal: Add support for sun8i THS on Allwinner H3

2016-06-24 Thread Ondřej Jirman
On 25.6.2016 02:54, Chen-Yu Tsai wrote: > On Sat, Jun 25, 2016 at 8:35 AM, Ondřej Jirman <meg...@megous.com> wrote: >> On 24.6.2016 05:09, Chen-Yu Tsai wrote: >>>> +static int sun8i_ths_h3_init(struct platform_device *pdev, >>>> +

Re: [linux-sunxi] [PATCH 13/14] ARM: dts: sun8i: Add gpio-regulator used on Orange Pi One

2016-06-24 Thread Ondřej Jirman
Hi Julian, thank you for the review. You're right. I added the pinctrl client nodes. Also the patches were split incorrectly, so I fixed that too. regards, Ondrej On 24.6.2016 04:51, Julian Calaby wrote: > Hi Ondrej, > > On Fri, Jun 24, 2016 at 5:21 AM, wrote: >> From:

[linux-sunxi] Re: [PATCH 06/14] ARM: dts: sun8i: Add cpu0 label to sun8i-h3.dtsi

2016-06-25 Thread Ondřej Jirman
On 25.6.2016 09:02, Maxime Ripard wrote: > On Sat, Jun 25, 2016 at 09:02:48AM +0800, Chen-Yu Tsai wrote: >> On Sat, Jun 25, 2016 at 6:51 AM, Ondřej Jirman <meg...@megous.com> wrote: >>> Hello, >>> >>> comments below. >>> >>> On 24.6.2016

[linux-sunxi] Re: [PATCH v2 02/14] thermal: sun8i_ths: Add support for the thermal sensor on Allwinner H3

2016-06-25 Thread Ondřej Jirman
On 25.6.2016 09:10, Maxime Ripard wrote: > On Sat, Jun 25, 2016 at 05:44:59AM +0200, meg...@megous.com wrote: >> From: Ondrej Jirman <meg...@megous.com> >> >> This patch adds support for the sun8i thermal sensor on >> Allwinner H3 SoC. >> >> Si

[linux-sunxi] Re: [PATCH v2 01/14] ARM: clk: sunxi: Add driver for the H3 THS clock

2016-06-25 Thread Ondřej Jirman
Hi Maxime, I try to base everything on the torvalds's kernel. I did notice the patches. Is there some main git tree/branch where this work is tracked in? I'd gladly use it. Also there's a PLL1 rate application patch, that would need to be ported to the new CCU code, in the case I would use it

[linux-sunxi] Re: Changed: sunxi-ng clock code - NKMP clock implementation is wrong

2016-07-28 Thread Ondřej Jirman
Hi Maxime, I don't have your sunxi-ng clock patches in my mailbox, so I'm replying to this. On 26.7.2016 08:32, Maxime Ripard wrote: > On Thu, Jul 21, 2016 at 11:52:15AM +0200, Ondřej Jirman wrote: >>>>> If so, then yes, trying to switch to the 24MHz oscillator before >>

Re: [linux-sunxi] [PATCH v2 14/14] ARM: dts: sun8i: Enable DVFS on Orange Pi One

2016-07-21 Thread Ondřej Jirman
Hello Michal, On 30.6.2016 13:13, Michal Suchanek wrote: > Hello, > > On 25 June 2016 at 05:45, wrote: >> From: Ondrej Jirman >> >> Use Xulong Orange Pi One GPIO based regulator for >> passive cooling and thermal management. >> >> Signed-off-by: Ondrej

[linux-sunxi] Re: Changed: sunxi-ng clock code - NKMP clock implementation is wrong

2016-07-28 Thread Ondřej Jirman
On 28.7.2016 23:00, Maxime Ripard wrote: > Hi Ondrej, > > On Thu, Jul 28, 2016 at 01:27:05PM +0200, Ondřej Jirman wrote: >> Hi Maxime, >> >> I don't have your sunxi-ng clock patches in my mailbox, so I'm replying >> to this. > > You can find it

Re: [linux-sunxi] Re: [PATCH v2 06/14] ARM: sun8i: clk: Add clk-factor rate application method

2016-07-26 Thread Ondřej Jirman
On 26.7.2016 08:32, Maxime Ripard wrote: > On Thu, Jul 21, 2016 at 11:52:15AM +0200, Ondřej Jirman wrote: >>>>> If so, then yes, trying to switch to the 24MHz oscillator before >>>>> applying the factors, and then switching back when the PLL is stable >>>

[linux-sunxi] Re: Changed: sunxi-ng clock code - NKMP clock implementation is wrong

2016-07-31 Thread Ondřej Jirman
Hi, On 31.7.2016 12:31, Maxime Ripard wrote: > Hi, > > On Fri, Jul 29, 2016 at 12:01:09AM +0200, Ondřej Jirman wrote: >> On 28.7.2016 23:00, Maxime Ripard wrote: >>> Hi Ondrej, >>> >>> On Thu, Jul 28, 2016 at 01:27:05PM +0200, Ondřej Jirman wrote: &

[linux-sunxi] Re: [PATCH v2 06/14] ARM: sun8i: clk: Add clk-factor rate application method

2016-07-21 Thread Ondřej Jirman
On 21.7.2016 11:48, Maxime Ripard wrote: > On Fri, Jul 15, 2016 at 12:38:54PM +0200, Ondřej Jirman wrote: >> On 15.7.2016 10:53, Maxime Ripard wrote: >>> On Fri, Jul 01, 2016 at 02:50:57AM +0200, Ondřej Jirman wrote: >>>>>> /** >>>>>>

[linux-sunxi] Re: [PATCH 06/14] ARM: dts: sun8i: Add cpu0 label to sun8i-h3.dtsi

2016-07-17 Thread Ondřej Jirman
On 25.6.2016 09:02, Maxime Ripard wrote: > On Sat, Jun 25, 2016 at 09:02:48AM +0800, Chen-Yu Tsai wrote: >> On Sat, Jun 25, 2016 at 6:51 AM, Ondřej Jirman <meg...@megous.com> wrote: >>> Hello, >>> >>> comments below. >>> >>> On 24.6.20

[linux-sunxi] Re: [PATCH v2 06/14] ARM: sun8i: clk: Add clk-factor rate application method

2016-07-15 Thread Ondřej Jirman
On 15.7.2016 10:53, Maxime Ripard wrote: > On Fri, Jul 01, 2016 at 02:50:57AM +0200, Ondřej Jirman wrote: >>>> /** >>>> + * sun8i_h3_apply_pll1_factors() - applies n, k, m, p factors to the >>>> + * register using an algorithm that tries to reserve the PLL

[linux-sunxi] Re: [PATCH v2 06/14] ARM: sun8i: clk: Add clk-factor rate application method

2016-07-15 Thread Ondřej Jirman
On 15.7.2016 15:27, Jean-Francois Moine wrote: > On Fri, 15 Jul 2016 12:38:54 +0200 > Ondřej Jirman <meg...@megous.com> wrote: > >>> If so, then yes, trying to switch to the 24MHz oscillator before >>> applying the factors, and then switching back when the

Re: [linux-sunxi] Re: [PATCH v2 06/14] ARM: sun8i: clk: Add clk-factor rate application method

2016-07-15 Thread Ondřej Jirman
On 15.7.2016 16:22, Michal Suchanek wrote: > Hello, > > On 15 July 2016 at 15:48, Ondřej Jirman <meg...@megous.com> wrote: >> >> >> On 15.7.2016 15:27, Jean-Francois Moine wrote: >>> On Fri, 15 Jul 2016 12:38:54 +0200 >>> Ondřej Jirman <meg..

[linux-sunxi] USB OTG on Orange Pi PC

2016-06-28 Thread Ondřej Jirman
Hi, if anyone wants to play with the OTG port support on Orange Pi PC, you can try these patches: https://files.megous.com/orange-pi-dvfs/linux-4.7-OrangePI/usb-otg/ I don't have much time to test it extensively, but it seems to work. I'm not yet submitting them "formally". This is just a

[linux-sunxi] Re: [PATCH v2 04/14] regulator: SY8106A regulator driver

2016-06-28 Thread Ondřej Jirman
On 27.6.2016 16:54, Mark Brown wrote: > On Sun, Jun 26, 2016 at 05:07:16PM +0200, Ondřej Jirman wrote: >> On 26.6.2016 13:26, Mark Brown wrote: > >>> I'm missing almost all of this series, I've just got this and another >>> patch which look like a standalone

Re: [linux-sunxi] [PATCH 1/3] clk: sunxi: Add a driver for the CCU

2016-06-28 Thread Ondřej Jirman
On 28.6.2016 17:37, Jean-Francois Moine wrote: > Most of the clocks in the Allwinner's SoCs are configured in the CCU > (Clock Configuration Unit). > > The PLL clocks are driven from the main clock. Their rates are controlled > by a set of multiply and divide factors, named from the Allwinner's >

[linux-sunxi] Re: USB OTG on Orange Pi PC

2016-06-30 Thread Ondřej Jirman
Hi, hopefuly, it was the NPE that I fixed. It was specifically in the H3 usb phy code path for phy0. So I believe it was untested, because I didn't find any dts file that would use phy0. Good luck with the audio driver. regards, o. On 30.6.2016 07:17, boob...@gmail.com wrote: > Nice work.

Re: [linux-sunxi] [PATCH v2 14/14] ARM: dts: sun8i: Enable DVFS on Orange Pi One

2016-06-30 Thread Ondřej Jirman
Hello, On 30.6.2016 13:13, Michal Suchanek wrote: > Hello, > > On 25 June 2016 at 05:45, wrote: >> From: Ondrej Jirman >> >> Use Xulong Orange Pi One GPIO based regulator for >> passive cooling and thermal management. >> >> Signed-off-by: Ondrej Jirman

Re: [linux-sunxi] [PATCH v2 14/14] ARM: dts: sun8i: Enable DVFS on Orange Pi One

2016-06-30 Thread Ondřej Jirman
On 30.6.2016 17:50, Michal Suchanek wrote: > On 30 June 2016 at 17:16, Michal Suchanek <hramr...@gmail.com> wrote: >> On 30 June 2016 at 16:19, Ondřej Jirman <meg...@megous.com> wrote: >>> Hello, >>> >>> On 30.6.2016 13:13, Michal Suchanek wrote

Re: [linux-sunxi] [PATCH v2 14/14] ARM: dts: sun8i: Enable DVFS on Orange Pi One

2016-06-30 Thread Ondřej Jirman
On 30.6.2016 17:16, Michal Suchanek wrote: > On 30 June 2016 at 16:19, Ondřej Jirman <meg...@megous.com> wrote: >> Hello, >> >> On 30.6.2016 13:13, Michal Suchanek wrote: >>> Hello, >>> >>> On 25 June 2016 at 05:45, <meg...@megou

Re: [linux-sunxi] Re: USB OTG on Orange Pi PC

2016-06-30 Thread Ondřej Jirman
On 30.6.2016 20:21, Michal Suchanek wrote: > On 30 June 2016 at 20:06, Michal Suchanek <hramr...@gmail.com> wrote: >> Hello, >> >> On 30 June 2016 at 16:44, Ondřej Jirman <m...@xff.cz> wrote: >>> Hi, >>> >>> hopefuly, it was the NPE that

[linux-sunxi] Re: [PATCH v2 06/14] ARM: sun8i: clk: Add clk-factor rate application method

2016-06-30 Thread Ondřej Jirman
On 30.6.2016 22:40, Maxime Ripard wrote: > Hi, > > On Sat, Jun 25, 2016 at 05:45:03AM +0200, meg...@megous.com wrote: >> From: Ondrej Jirman >> >> PLL1 on H3 requires special factors application algorithm, >> when the rate is changed. This algorithm was extracted >> from the

Re: [linux-sunxi] [PATCH v2 14/14] ARM: dts: sun8i: Enable DVFS on Orange Pi One

2016-06-30 Thread Ondřej Jirman
On 30.6.2016 16:23, Siarhei Siamashka wrote: > On Thu, 30 Jun 2016 13:13:48 +0200 > Michal Suchanek wrote: > >> Hello, >> >> On 25 June 2016 at 05:45, wrote: >>> From: Ondrej Jirman >>> >>> Use Xulong Orange Pi One GPIO based

[linux-sunxi] Re: [PATCH v2 06/14] ARM: sun8i: clk: Add clk-factor rate application method

2016-06-30 Thread Ondřej Jirman
Hi, On 30.6.2016 22:40, Maxime Ripard wrote: > Hi, > > On Sat, Jun 25, 2016 at 05:45:03AM +0200, meg...@megous.com wrote: >> From: Ondrej Jirman >> >> PLL1 on H3 requires special factors application algorithm, >> when the rate is changed. This algorithm was extracted >> from

[linux-sunxi] Re: [PATCH v2 06/14] ARM: sun8i: clk: Add clk-factor rate application method

2016-07-01 Thread Ondřej Jirman
On 1.7.2016 07:37, Jean-Francois Moine wrote: > On Fri, 1 Jul 2016 02:50:57 +0200 > Ondřej Jirman <meg...@megous.com> wrote: > >>> Since this is really specific, I guess you could simply make the >>> clk_ops for the nkmp clocks public, and just re-implement set_r

[linux-sunxi] Re: [PATCH 06/14] ARM: dts: sun8i: Add cpu0 label to sun8i-h3.dtsi

2016-06-29 Thread Ondřej Jirman
On 29.6.2016 22:45, Maxime Ripard wrote: > Hi, > > On Sat, Jun 25, 2016 at 04:50:24PM +0200, Ondřej Jirman wrote: >> On 25.6.2016 09:02, Maxime Ripard wrote: >>> On Sat, Jun 25, 2016 at 09:02:48AM +0800, Chen-Yu Tsai wrote: >>>> On Sat, Jun 25, 2016 at 6:51

Re: [linux-sunxi] Re: USB OTG on Orange Pi PC

2016-07-01 Thread Ondřej Jirman
On 1.7.2016 13:19, Michal Suchanek wrote: > On 1 July 2016 at 13:02, Michal Suchanek <hramr...@gmail.com> wrote: >> On 30 June 2016 at 22:30, Ondřej Jirman <m...@xff.cz> wrote: >>> On 30.6.2016 20:21, Michal Suchanek wrote: >>>> On 30 June 2016 at

Re: [linux-sunxi] [PATCH 1/4] phy: sun4i-usb: support PHY0 on H3 in MUSB mode

2017-01-16 Thread Ondřej Jirman
Dne 16.1.2017 v 20:14 Icenowy Zheng napsal(a): > The PHY0 on H3 can be wired either to MUSB controller or OHCI/EHCI > controller. > > The original driver wired it to OHCI/EHCI controller; however, as the > code to use PHY0 as OHCI/EHCI is missing, it makes the PHY fully > unusable. > > Rename

Re: [linux-sunxi] [PATCH] clk: sunxi-ng: fix PLL_CPUX adjusting on H3

2017-01-18 Thread Ondřej Jirman
Dne 18.1.2017 v 17:56 Maxime Ripard napsal(a): >>> What's your current plan to fix that? I guess the easiest (and most >>> likely to be reusable) would be to allow for clock tables, instead of >>> using the generic approach. We might have some other clocks (like >>> audio or video) that would need

Re: [linux-sunxi] [PATCH] clk: sunxi-ng: fix PLL_CPUX adjusting on H3

2017-01-16 Thread Ondřej Jirman
Hi Maxime, Dne 16.1.2017 v 17:43 Maxime Ripard napsal(a): >> It does lock up quickly with mainline ccu_nkmp_find_best algorithm >> for finding factors. >> >> Even with linux kernel, it breaks. It's just more difficult to hit the >> right conditions. I got oops only right after boot when running

Re: [linux-sunxi] Help getting I2C to work on sun8i-h3 on linux 4.8

2016-09-02 Thread Ondřej Jirman
Hi, I think you may be hitting this issue: https://lkml.org/lkml/2016/8/26/150 regards, Ondrej Dne 27.8.2016 v 00:07 Paulo Costa napsal(a): > Hello, folks. > > It's my first time working with this, please let me know if this isn't > the right mailing list or not the right way to ask for

Re: [linux-sunxi] [PATCH v5 0/7] ARM: ASoC: drm: sun8i: Add DE2 HDMI audio and video

2016-10-23 Thread Ondřej Jirman
Dne 22.10.2016 v 15:28 Jean-Francois Moine napsal(a): > This patchset series adds HDMI audio and video support to the Allwinner > sun8i SoCs which include the display engine 2 (DE2). Hi, I've tested your patches on top of my 4.9-rc1 changes on Orange Pi PC, and HDMI display output works well --

Re: [linux-sunxi] [PATCH 1/3] phy: sun4i: check PHY id when poking unknown bit of pmu

2016-10-24 Thread Ondřej Jirman
Dne 24.10.2016 v 05:59 Icenowy Zheng napsal(a): > Allwinner SoC's PHY 0, when used as OTG controller, have no pmu part. > The code that poke some unknown bit of PMU for H3/A64 didn't check > the PHY, and will cause kernel oops when PHY 0 is used. > > Fixes: b3e0d141ca9f (phy: sun4i: add support

Re: [linux-sunxi] [PATCH v6 0/5] drm: sun8i: Add DE2 HDMI video support

2016-11-21 Thread Ondřej Jirman
Dne 21.11.2016 v 19:14 Jean-Francois Moine napsal(a): > On Mon, 21 Nov 2016 01:54:53 +0100 > Ondřej Jirman <meg...@megous.com> wrote: > >> Dne 20.11.2016 v 12:32 Jean-Francois Moine napsal(a): >>> This patchset series adds HDMI video support to the Allwinne

Re: [linux-sunxi] [PATCH v6 3/5] ARM: dts: sun8i-h3: add HDMI video nodes

2016-11-24 Thread Ondřej Jirman
Dne 25.11.2016 v 06:27 Icenowy Zheng napsal(a): > > > 20.11.2016, 20:07, "Jean-Francois Moine" : >> Signed-off-by: Jean-Francois Moine >> --- >> arch/arm/boot/dts/sun8i-h3.dtsi | 51 >> + >> 1 file changed, 51

Re: [linux-sunxi] [PATCH v6 0/5] drm: sun8i: Add DE2 HDMI video support

2016-11-20 Thread Ondřej Jirman
Dne 20.11.2016 v 12:32 Jean-Francois Moine napsal(a): > This patchset series adds HDMI video support to the Allwinner > sun8i SoCs which include the display engine 2 (DE2). > The driver contains the code for the A83T and H3, but it could be > used/extended for other SoCs as the A64, H2 and H5.

Re: [linux-sunxi] Mainline stability (overvolting/undervolting) etc. (u-boot/linux)

2016-11-01 Thread Ondřej Jirman
Dne 1.11.2016 v 00:55 Rune Petersen napsal(a): > On 25/10/16 16:36, Olliver Schinagl wrote: >> Hey all, >> >> as some of you are probably aware, some users occasionally experience >> some >> instability using the mainline components. I specifically only want to >> focus on >> mainline, as with the

Re: [linux-sunxi] [PATCH] clk: sunxi-ng: fix PLL_CPUX adjusting on H3

2017-01-07 Thread Ondřej Jirman
Maxime, Dne 25.11.2016 v 01:28 meg...@megous.com napsal(a): > From: Ondrej Jirman > > When adjusting PLL_CPUX on H3, the PLL is temporarily driven > too high, and the system becomes unstable (oopses or hangs). > > Add a notifier to avoid this situation by temporarily

Re: [linux-sunxi] [PATCH] clk: sunxi-ng: fix PLL_CPUX adjusting on H3

2017-01-09 Thread Ondřej Jirman
Dne 9.1.2017 v 10:59 Maxime Ripard napsal(a): > On Sat, Jan 07, 2017 at 04:49:18PM +0100, Ondřej Jirman wrote: >> Maxime, >> >> Dne 25.11.2016 v 01:28 meg...@megous.com napsal(a): >>> From: Ondrej Jirman <meg...@megous.com> >>> >>> When a

Re: [linux-sunxi] [PATCH v3 0/5] Add dual-role OTG support for Allwinner H3

2017-03-06 Thread Ondřej Jirman
Hi Icenowy, when I was trying to add OTG support I found an issue with powercycling. When I have USB cable connecting PC and the OTG port on the SBC, when the board enables the vbus, it would become impossible to power cycle the board after poweroff. The reason being that when vbus is enabled,

[linux-sunxi] Re: [PATCH v7 0/6] Add support for Orange Pi 3

2019-06-24 Thread Ondřej Jirman
On Mon, Jun 24, 2019 at 10:29:27AM -0700, David Miller wrote: > From: meg...@megous.com > Date: Thu, 20 Jun 2019 15:47:42 +0200 > > > From: Ondrej Jirman > > > > This series implements support for Xunlong Orange Pi 3 board. > > > > - ethernet support (patches 1-3) > > - HDMI support (patches

[linux-sunxi] Re: [PATCH v7 0/6] Add support for Orange Pi 3

2019-06-24 Thread Ondřej Jirman
On Mon, Jun 24, 2019 at 01:24:56PM -0700, David Miller wrote: > From: Ondřej Jirman > Date: Mon, 24 Jun 2019 19:46:37 +0200 > > > This series was even longer before, with patches all around for various > > maintainers. I'd expect that relevant maintainers pick the range

[linux-sunxi] Re: [PATCH v4 04/10] mailbox: sunxi-msgbox: Add a new mailbox driver

2019-08-20 Thread Ondřej Jirman
Hi Samuel, On Mon, Aug 19, 2019 at 10:23:05PM -0500, Samuel Holland wrote: > Allwinner sun8i, sun9i, and sun50i SoCs contain a hardware message box > used for communication between the ARM CPUs and the ARISC management > coprocessor. The hardware contains 8 unidirectional 4-message FIFOs. > >

[linux-sunxi] Re: [PATCH v4 04/10] mailbox: sunxi-msgbox: Add a new mailbox driver

2019-08-20 Thread Ondřej Jirman
Hi, On Tue, Aug 20, 2019 at 08:07:53AM -0500, Samuel Holland wrote: > On 8/20/19 6:18 AM, Ondřej Jirman wrote: > > Hi Samuel, > > > > On Mon, Aug 19, 2019 at 10:23:05PM -0500, Samuel Holland wrote: > >> Allwinner sun8i, sun9i, and sun50i SoCs contain a

Re: [linux-sunxi] [PATCH v2 2/3] rtc: sun6i: Add support for H6 RTC

2019-08-24 Thread Ondřej Jirman
Hello Jernej, On Sat, Aug 24, 2019 at 11:09:49PM +0200, Jernej Škrabec wrote: > > Visually? > > > > That would explain why it doesn't work for you. The mainline RTC driver > > disables auto-switch feature, and if your board doesn't have a crystal for > > LOSC, RTC will not generate a clock for

Re: [linux-sunxi] [PATCH v2 2/3] rtc: sun6i: Add support for H6 RTC

2019-08-24 Thread Ondřej Jirman
On Sat, Aug 24, 2019 at 11:36:26PM +0200, Jernej Škrabec wrote: > Dne sobota, 24. avgust 2019 ob 23:27:46 CEST je Ondřej Jirman napisal(a): > > Hello Jernej, > > > > On Sat, Aug 24, 2019 at 11:09:49PM +0200, Jernej Škrabec wrote: > > > > Visually? > &

Re: [linux-sunxi] [PATCH v2 0/3] Add basic support for RTC on Allwinner H6 SoC

2019-08-24 Thread Ondřej Jirman
Hi, On Sat, Aug 24, 2019 at 10:06:14AM +0200, Jernej Škrabec wrote: > Dne sobota, 24. avgust 2019 ob 10:04:24 CEST je Jernej Škrabec napisal(a): > > Hi! > > > > Dne torek, 20. avgust 2019 ob 17:19:31 CEST je meg...@megous.com napisal(a): > > > From: Ondrej Jirman > > > > > > I went through the

Re: [linux-sunxi] [PATCH v2 2/3] rtc: sun6i: Add support for H6 RTC

2019-08-24 Thread Ondřej Jirman
On Sat, Aug 24, 2019 at 03:16:41PM +0200, Jernej Škrabec wrote: > Dne sobota, 24. avgust 2019 ob 15:05:44 CEST je Ondřej Jirman napisal(a): > > On Sat, Aug 24, 2019 at 02:51:54PM +0200, Jernej Škrabec wrote: > > > Dne sobota, 24. avgust 2019 ob 14:46:54 CEST je Ondřej Jirman napi

Re: [linux-sunxi] [PATCH v2 2/3] rtc: sun6i: Add support for H6 RTC

2019-08-24 Thread Ondřej Jirman
On Sat, Aug 24, 2019 at 02:51:54PM +0200, Jernej Škrabec wrote: > Dne sobota, 24. avgust 2019 ob 14:46:54 CEST je Ondřej Jirman napisal(a): > > Hi, > > > > On Sat, Aug 24, 2019 at 02:32:32PM +0200, Jernej Škrabec wrote: > > > Hi! > > > > > > Dn

Re: [linux-sunxi] [PATCH v2 2/3] rtc: sun6i: Add support for H6 RTC

2019-08-24 Thread Ondřej Jirman
Hi, On Sat, Aug 24, 2019 at 02:32:32PM +0200, Jernej Škrabec wrote: > Hi! > > Dne torek, 20. avgust 2019 ob 17:19:33 CEST je meg...@megous.com napisal(a): > > From: Ondrej Jirman > > > > RTC on H6 is mostly the same as on H5 and H3. It has slight differences > > mostly in features that are not

[linux-sunxi] Re: [PATCH] arm64: dts: allwinner: a64: pine64-plus: Add PHY regulator delay

2019-08-27 Thread Ondřej Jirman
Hi, On Tue, Aug 27, 2019 at 03:34:43PM +0200, Maxime Ripard wrote: > On Sun, Aug 25, 2019 at 03:03:36PM +0200, Jernej Skrabec wrote: > > Depending on kernel and bootloader configuration, it's possible that > > Realtek ethernet PHY isn't powered on properly. It needs some time > > before it can be

[linux-sunxi] Re: [PATCH 00/10] arm64: dts: allwinner: h5: Enable CPU DVFS (cpufreq)

2019-09-02 Thread Ondřej Jirman
Hi, On Wed, Jan 30, 2019 at 04:41:53PM +0800, Chen-Yu Tsai wrote: > Hi everyone, > > This series enables DVFS for the CPU cores (aka cpufreq) on the > Allwinner H5 SoC. The OPP table was taken from Armbian, with minor > tweaks to the maximum voltage to account for slightly increased voltage > on

Re: [linux-sunxi] is there any plan to enable cursor plane for sun4i-drm?

2019-09-04 Thread Ondřej Jirman
On Wed, Sep 04, 2019 at 07:29:39AM +0200, Jernej Škrabec wrote: > Dne sreda, 04. september 2019 ob 05:08:14 CEST je 张宁 napisal(a): > > just check drm_mode_cursor_universal, cursor plane needs to support > > DRM_FORMAT_ARGB > > > > but VI layer doesn't support alpha, directly change VI layer

[linux-sunxi] Re: [PATCH v4 00/10] Allwinner sunxi message box support

2019-09-08 Thread Ondřej Jirman
Hello Samuel, On Mon, Aug 19, 2019 at 10:23:01PM -0500, Samuel Holland wrote: > This series adds support for the "hardware message box" in sun8i, sun9i, > and sun50i SoCs, used for communication with the ARISC management > processor (the platform's equivalent of the ARM SCP). The end goal is to >

[linux-sunxi] Re: [PATCH v4 00/10] Allwinner sunxi message box support

2019-09-09 Thread Ondřej Jirman
Hi, On Sun, Sep 08, 2019 at 10:54:17PM -0500, Samuel Holland wrote: > On 9/8/19 10:22 PM, Ondřej Jirman wrote: > > Hello Samuel, > > > > On Mon, Aug 19, 2019 at 10:23:01PM -0500, Samuel Holland wrote: > >> This series adds support for the "hardware message bo

Re: [linux-sunxi] is there any plan to enable cursor plane for sun4i-drm?

2019-09-07 Thread Ondřej Jirman
September 5, 2019 at 5:38:05 AM UTC+8, Jernej Škrabec wrote: > > > > Dne sreda, 04. september 2019 ob 23:10:15 CEST je Ondřej Jirman > > napisal(a): > > > On Wed, Sep 04, 2019 at 11:02:33PM +0200, Jernej Škrabec wrote: > > > > Dne sreda, 04. september 2019 ob 22:

Re: [linux-sunxi] is there any plan to enable cursor plane for sun4i-drm?

2019-09-07 Thread Ondřej Jirman
rs don't fit in current DRM design. > > > On Thursday, September 5, 2019 at 5:38:05 AM UTC+8, Jernej Škrabec wrote: > > > > Dne sreda, 04. september 2019 ob 23:10:15 CEST je Ondřej Jirman > > napisal(a): > > > On Wed, Sep 04, 2019 at 11:02:33PM +0200, Jernej Šk

Re: [linux-sunxi] is there any plan to enable cursor plane for sun4i-drm?

2019-09-04 Thread Ondřej Jirman
On Wed, Sep 04, 2019 at 11:02:33PM +0200, Jernej Škrabec wrote: > Dne sreda, 04. september 2019 ob 22:45:47 CEST je Ondřej Jirman napisal(a): > > On Wed, Sep 04, 2019 at 07:29:39AM +0200, Jernej Škrabec wrote: > > > Dne sreda, 04. september 2019 ob 05:08:14 CEST je 张宁 napisa

Re: [linux-sunxi] is there any plan to enable cursor plane for sun4i-drm?

2019-09-17 Thread Ondřej Jirman
7b48cc https://megous.com/git/linux/commit/?h=private-5.3=5af208e90de5ced30350fc0fba8419e9662e9bb7 > On Monday, September 9, 2019 at 1:27:08 AM UTC, 张宁 wrote: > > > > thanks for your patches. > > > > BR. > > Ning. > > > > On Sunday, September 8, 2019 at

Re: [linux-sunxi] is there any plan to enable cursor plane for sun4i-drm?

2019-09-08 Thread Ondřej Jirman
gt; > > > > On Thursday, September 5, 2019 at 5:38:05 AM UTC+8, Jernej Škrabec wrote: > > > > > > Dne sreda, 04. september 2019 ob 23:10:15 CEST je Ondřej Jirman > > > napisal(a): > > > > On Wed, Sep 04, 2019 at 11:02:33PM +0200, Jernej Škrabec

Re: [linux-sunxi] is there any plan to enable cursor plane for sun4i-drm?

2019-09-08 Thread Ondřej Jirman
Hi, On Sun, Sep 08, 2019 at 07:01:42PM +0200, Jernej Škrabec wrote: > Dne nedelja, 08. september 2019 ob 12:20:50 CEST je Ondřej Jirman napisal(a): > > Hi, > > > > On Sun, Sep 08, 2019 at 12:21:45AM +0200, megous hlavni wrote: > > > On Thu, Sep 05, 2019

Re: [linux-sunxi] is there any plan to enable cursor plane for sun4i-drm?

2019-09-08 Thread Ondřej Jirman
On Wed, Sep 04, 2019 at 11:38:01PM +0200, Jernej Škrabec wrote: > Dne sreda, 04. september 2019 ob 23:10:15 CEST je Ondřej Jirman napisal(a): > > On Wed, Sep 04, 2019 at 11:02:33PM +0200, Jernej Škrabec wrote: > > > Dne sreda, 04. september 2019 ob 22:45:47 CEST je Ondřej

Re: [linux-sunxi] [PATCH 2/3] rtc: sun6i: Add support for H6 RTC

2019-08-05 Thread Ondřej Jirman
On Mon, Aug 05, 2019 at 06:54:17PM +0800, Chen-Yu Tsai wrote: > On Mon, Aug 5, 2019 at 6:45 PM Ondřej Jirman wrote: > > > > On Mon, Aug 05, 2019 at 06:16:14PM +0800, Chen-Yu Tsai wrote: > > > On Fri, Apr 12, 2019 at 8:07 PM megous via linux-sunxi > > > wrote: &g

Re: [linux-sunxi] [PATCH 2/3] rtc: sun6i: Add support for H6 RTC

2019-08-05 Thread Ondřej Jirman
On Mon, Aug 05, 2019 at 06:16:14PM +0800, Chen-Yu Tsai wrote: > On Fri, Apr 12, 2019 at 8:07 PM megous via linux-sunxi > wrote: > > > > From: Ondrej Jirman > > > > RTC on H6 is mostly the same as on H5 and H3. It has slight differences > > mostly in features that are not yet supported by this

Re: [linux-sunxi] [PATCH 2/3] rtc: sun6i: Add support for H6 RTC

2019-08-05 Thread Ondřej Jirman
On Mon, Aug 05, 2019 at 06:16:14PM +0800, Chen-Yu Tsai wrote: > On Fri, Apr 12, 2019 at 8:07 PM megous via linux-sunxi > wrote: > > > > From: Ondrej Jirman > > > > RTC on H6 is mostly the same as on H5 and H3. It has slight differences > > mostly in features that are not yet supported by this

Re: [linux-sunxi] [PATCH 0/3] Add basic support for RTC on Allwinner H6 SoC

2019-08-06 Thread Ondřej Jirman
On Mon, Apr 15, 2019 at 04:18:12PM +0800, Chen-Yu Tsai wrote: > On Fri, Apr 12, 2019 at 8:07 PM megous via linux-sunxi > wrote: > > > > From: Ondrej Jirman > > > > I went through the datasheets for H6 and H5, and compared the differences. > > RTCs are largely similar, but not entirely

Re: [linux-sunxi] [PATCH 0/3] Add basic support for RTC on Allwinner H6 SoC

2019-08-06 Thread Ondřej Jirman
On Tue, Aug 06, 2019 at 08:30:45PM +0200, megous hlavni wrote: > On Mon, Apr 15, 2019 at 04:18:12PM +0800, Chen-Yu Tsai wrote: > > On Fri, Apr 12, 2019 at 8:07 PM megous via linux-sunxi > > wrote: > > > > > > From: Ondrej Jirman > > > > > > I went through the datasheets for H6 and H5, and

Re: [linux-sunxi] [PATCH v8 4/4] arm64: dts: allwinner: orange-pi-3: Enable HDMI output

2019-08-09 Thread Ondřej Jirman
On Fri, Aug 09, 2019 at 10:25:32AM +0200, Code Kipper wrote: > On Tue, 6 Aug 2019 at 17:57, wrote: > > > > From: Ondrej Jirman > > > > Orange Pi 3 has a DDC_CEC_EN signal connected to PH2, that enables the DDC > > I2C bus voltage shifter. Before EDID can be read, we need to pull PH2 high. > >

Re: [linux-sunxi] [PATCH 0/3] Add basic support for RTC on Allwinner H6 SoC

2019-08-09 Thread Ondřej Jirman
On Fri, Aug 09, 2019 at 01:39:30AM +0200, Alexandre Belloni wrote: > On 08/08/2019 14:12:37+0200, Ondřej Jirman wrote: > > On Wed, Aug 07, 2019 at 12:55:02PM +0200, Alexandre Belloni wrote: > > > Hi, > > > > > > On 06/08/2019 20:30:45+0200, Ondřej Jirman wro

Re: [linux-sunxi] [PATCH 0/3] Add basic support for RTC on Allwinner H6 SoC

2019-08-08 Thread Ondřej Jirman
On Wed, Aug 07, 2019 at 12:55:02PM +0200, Alexandre Belloni wrote: > Hi, > > On 06/08/2019 20:30:45+0200, Ondřej Jirman wrote: > > Maybe whether XO or DCXO is used also matters if you want to do some fine > > tunning of DCXO (control register has pletny of options), but

[linux-sunxi] Re: [PATCH] phy: allwinner: Fix GENMASK misuse

2019-11-07 Thread Ondřej Jirman
Hello Rikard, On Thu, Nov 07, 2019 at 09:46:45PM +0100, Rikard Falkeborn wrote: > Arguments are supposed to be ordered high then low. > > Signed-off-by: Rikard Falkeborn > --- > Spotted while trying to add compile time checks of GENMASK arguments. > Patch has only been compile tested. thank

Re: [linux-sunxi] [PATCH] cpufreq: sun50i: Fix CPU speed bin detection

2019-10-31 Thread Ondřej Jirman
Hi, On Thu, Oct 31, 2019 at 07:55:43PM +0100, Clément Péron wrote: > Hi Ondrej, > > On Thu, 31 Oct 2019 at 19:14, Ondrej Jirman wrote: > > > > I have failures to boot on Orange Pi 3, because this driver determined > > that my SoC is from the normal bin, but my SoC only works reliably with > >

[linux-sunxi] Re: [PATCH] phy: allwinner: Fix GENMASK misuse

2019-11-08 Thread Ondřej Jirman
On Fri, Nov 08, 2019 at 07:29:21PM +0800, Icenowy Zheng wrote: > > > 于 2019年11月8日 GMT+08:00 上午5:45:14, "Ondřej Jirman" 写到: > >Hello Rikard, > > > >On Thu, Nov 07, 2019 at 09:46:45PM +0100, Rikard Falkeborn wrote: > >> Arguments are supposed to b

[linux-sunxi] Re: [PATCH] phy: allwinner: Fix GENMASK misuse

2019-11-08 Thread Ondřej Jirman
On Fri, Nov 08, 2019 at 12:41:39PM +0100, megous hlavni wrote: > On Fri, Nov 08, 2019 at 07:29:21PM +0800, Icenowy Zheng wrote: > > > > > > 于 2019年11月8日 GMT+08:00 上午5:45:14, "Ondřej Jirman" 写到: > > >Hello Rikard, > > > > > >On Thu

[linux-sunxi] Re: [U-Boot] [PATCH] sunxi: set PIO voltage to hardware-detected value on startup on H6

2019-10-25 Thread Ondřej Jirman
Hi, On Wed, Apr 24, 2019 at 01:44:12PM +0800, Icenowy Zheng wrote: > The Allwinner H6 SoC has a register to set the PIO banks' voltage. When > it mismatches the real voltage supplied to the VCC to the PIO supply, > the PIO will work improperly. > > The PIO controller also has a register that

[linux-sunxi] Re: [PATCH] input: sun4i-lradc-keys: Add wakup support

2019-10-28 Thread Ondřej Jirman
Hello Dmitry, On Mon, Oct 28, 2019 at 04:38:28PM -0700, Dmitry Torokhov wrote: > Hi Ondrej, > > On Mon, Oct 28, 2019 at 11:15:02PM +0100, Ondrej Jirman wrote: > > Allow the driver to wakeup the system on key press. > > > > Signed-off-by: Ondrej Jirman > > --- > >

Re: [linux-sunxi] Re: [PATCH] input: sun4i-lradc-keys: Add wakup support

2019-10-28 Thread Ondřej Jirman
On Mon, Oct 28, 2019 at 05:12:50PM -0700, Dmitry Torokhov wrote: > On Tue, Oct 29, 2019 at 12:56:26AM +0100, Ondřej Jirman wrote: > > On Mon, Oct 28, 2019 at 04:38:28PM -0700, Dmitry Torokhov wrote: > > > > + > > > > + error = dev_pm_set_wake_irq(dev

Re: [linux-sunxi] [PATCH] ARM: sunxi: Fix CPU powerdown on A83T

2019-10-28 Thread Ondřej Jirman
On Tue, Oct 29, 2019 at 09:09:40AM +0800, Chen-Yu Tsai wrote: > On Tue, Oct 29, 2019 at 5:49 AM Ondrej Jirman wrote: > > > > PRCM_PWROFF_GATING_REG has CPU0 at bit 4 on A83T. So without this > > patch, instead of gating the CPU0, the whole cluster was power gated, > > when shutting down first CPU

Re: [linux-sunxi] Re: [PATCH] input: sun4i-lradc-keys: Add wakup support

2019-10-29 Thread Ondřej Jirman
On Mon, Oct 28, 2019 at 09:18:04PM -0700, Dmitry Torokhov wrote: > On Tue, Oct 29, 2019 at 02:45:59AM +0100, Ondřej Jirman wrote: > > On Mon, Oct 28, 2019 at 05:12:50PM -0700, Dmitry Torokhov wrote: > > > On Tue, Oct 29, 2019 at 12:56:26AM +0100, Ondřej Jirman wrote: > >

[linux-sunxi] Re: [PATCH 1/3] input: edt-ft5x06: Add support for regulator

2019-10-29 Thread Ondřej Jirman
Hi Marco, On Tue, Oct 29, 2019 at 09:55:45AM +0100, Marco Felsch wrote: > Hi Dmitry, > > On 19-10-28 21:12, Dmitry Torokhov wrote: > > On Tue, Oct 29, 2019 at 01:58:04AM +0100, Ondrej Jirman wrote: > > > From: Mylčne Josserand > > > > > > Add the support for enabling optional regulator that

[linux-sunxi] Re: [PATCH 3/3] arm: dts: sun8i: a83t: a711: Add touchscreen node

2019-10-29 Thread Ondřej Jirman
Hello Marco, On Tue, Oct 29, 2019 at 10:08:01AM +0100, Marco Felsch wrote: > Hi, > > On 19-10-29 01:58, Ondrej Jirman wrote: > > From: Mylčne Josserand > > > > Enable a FocalTech EDT-FT5x06 Polytouch touchscreen. > > > > Signed-off-by: Ondrej Jirman > > Signed-off-by: Mylčne Josserand > >

Re: [linux-sunxi] [PATCH] media: sun6i-csi: Fix incorrect HSYNC/VSYNC/PCLK polarity configuration

2019-11-27 Thread Ondřej Jirman
Hi, On Thu, Nov 28, 2019 at 10:26:08AM +0800, Yong wrote: > Hi Ondrej, > > This has been discussed. > And Maxime sent a patch for this: > https://www.mail-archive.com/linux-media@vger.kernel.org/msg127149.html Thanks for pointing to the previous patch. But that patch doesn't make any sense,

Re: [linux-sunxi] [PATCH] media: sun6i-csi: Fix incorrect HSYNC/VSYNC/PCLK polarity configuration

2019-11-27 Thread Ondřej Jirman
On Thu, Nov 28, 2019 at 11:26:24AM +0800, Chen-Yu Tsai wrote: > On Thu, Nov 28, 2019 at 11:06 AM Ondřej Jirman wrote: > > > > Hi, > > > > On Thu, Nov 28, 2019 at 10:26:08AM +0800, Yong wrote: > > > Hi Ondrej, > > > > > > This has been discusse

[linux-sunxi] Re: [PATCH] cpufreq: sun50i: Fix CPU speed bin detection

2019-11-01 Thread Ondřej Jirman
On Fri, Nov 01, 2019 at 04:07:01PM +0100, Maxime Ripard wrote: > On Thu, Oct 31, 2019 at 07:13:58PM +0100, Ondrej Jirman wrote: > > I have failures to boot on Orange Pi 3, because this driver determined > > that my SoC is from the normal bin, but my SoC only works reliably with > > the OPP values

Re: [linux-sunxi] [PATCH] cpufreq: sun50i: Fix CPU speed bin detection

2019-11-01 Thread Ondřej Jirman
Hi, On Thu, Oct 31, 2019 at 08:12:57PM +0100, megous hlavni wrote: > Hi, > > On Thu, Oct 31, 2019 at 07:55:43PM +0100, Clément Péron wrote: > > Hi Ondrej, > > > > On Thu, 31 Oct 2019 at 19:14, Ondrej Jirman wrote: > > > > > > I have failures to boot on Orange Pi 3, because this driver

[linux-sunxi] Re: [PATCH] cpufreq: sun50i: Fix CPU speed bin detection

2019-11-01 Thread Ondřej Jirman
On Fri, Nov 01, 2019 at 04:07:01PM +0100, Maxime Ripard wrote: > On Thu, Oct 31, 2019 at 07:13:58PM +0100, Ondrej Jirman wrote: > > I have failures to boot on Orange Pi 3, because this driver determined > > that my SoC is from the normal bin, but my SoC only works reliably with > > the OPP values

[linux-sunxi] Re: [PATCH 4/4] arm64: dts: allwinner: orange-pi-3: Enable USB 3.0 host support

2019-11-04 Thread Ondřej Jirman
Hello Maxime, On Mon, Oct 21, 2019 at 01:09:46PM +0200, Maxime Ripard wrote: > On Sun, Oct 20, 2019 at 03:42:29PM +0200, meg...@megous.com wrote: > > From: Ondrej Jirman > > > > Enable Allwinner's USB 3.0 phy and the host controller. Orange Pi 3 > > board has GL3510 USB 3.0 4-port hub connected

Re: [linux-sunxi] [PATCH 3/3] Revert "drm/sun4i: dsi: Rework a bit the hblk calculation"

2019-10-07 Thread Ondřej Jirman
HI Icenowy, On Sun, Oct 06, 2019 at 11:12:43PM +0800, Icenowy Zheng wrote: > 在 2019-10-06日的 22:44 +0800,Icenowy Zheng写道: > > 在 2019-10-03四的 09:53 +0530,Jagan Teki写道: > > > Hi Wens, > > > > > > On Tue, Oct 1, 2019 at 1:34 PM Icenowy Zheng > > > wrote: > > > > This reverts commit

Re: [linux-sunxi] [PATCH v2] arm64: dts: allwinner: h6: orangepi-3: Add eMMC node

2020-02-12 Thread Ondřej Jirman
Hi, On Mon, Feb 10, 2020 at 06:40:07PM +0100, Jernej Skrabec wrote: > OrangePi 3 can optionally have 8 GiB eMMC (soldered on board). Because > those pins are dedicated to eMMC exclusively, node can be added for both > variants (with and without eMMC). Kernel will then scan bus for presence > of

[linux-sunxi] Re: [PATCH 0/4] Add support for charger LED for AXP813 and TBS A711 Tablet

2020-02-23 Thread Ondřej Jirman
On Sun, Feb 23, 2020 at 02:27:30PM +0100, megous hlavni wrote: > On Sun, Feb 23, 2020 at 02:14:31PM +0100, megous hlavni wrote: > > The tablet has a charger LED exposed on the top. This LED is controlled > > by AXP813 PMIC. Add support for enabling the LED and using it either > > for charging

[linux-sunxi] Re: [PATCH 0/4] Add support for charger LED for AXP813 and TBS A711 Tablet

2020-02-23 Thread Ondřej Jirman
On Sun, Feb 23, 2020 at 02:14:31PM +0100, megous hlavni wrote: > The tablet has a charger LED exposed on the top. This LED is controlled > by AXP813 PMIC. Add support for enabling the LED and using it either > for charging indication (handled by PMIC automatically) or for other uses > via user

[linux-sunxi] Re: [PATCH v2] ARM: dts: sun8i-a83t: Add thermal trip points/cooling maps

2020-02-24 Thread Ondřej Jirman
Hi, On Mon, Feb 24, 2020 at 06:06:20PM +0100, Daniel Lezcano wrote: > On 24/02/2020 17:54, Ondrej Jirman wrote: > > This enables passive cooling by down-regulating CPU voltage > > clocks = < CLK_C1CPUX>; > > @@ -1188,12 +1188,60 @@ cpu0_thermal: cpu0-thermal { > >

  1   2   3   >