Re: [linux-sunxi] [PATCH v6 4/8] ARM: sunxi: Add driver for SD/MMC hosts found on Allwinner sunxi SoCs

2014-02-16 Thread Priit Laes
Ühel kenal päeval, P, 16.02.2014 kell 06:11, kirjutas David Lanzendörfer: This is based on the driver Allwinner ships in their Android kernel sources. [...] +++ b/drivers/mmc/host/sunxi-mmc.c @@ -0,0 +1,876 @@ +/* + * Driver for sunxi SD/MMC host controllers + * (C) Copyright 2014-2015

Re: [linux-sunxi] [PATCH v6 4/8] ARM: sunxi: Add driver for SD/MMC hosts found on Allwinner sunxi SoCs

2014-02-17 Thread Priit Laes
are in the future, everything else seems fine. And looks better in v7 already. Päikest, Priit Laes :) -- You received this message because you are subscribed to the Google Groups linux-sunxi group. To unsubscribe from this group and stop receiving emails from it, send an email to linux-sunxi

Re: [linux-sunxi] [PATCH v7 4/8] ARM: sunxi: Add driver for SD/MMC hosts found on Allwinner sunxi SoCs

2014-02-18 Thread Priit Laes
SDXC_IDMAC_HOST_ABORT_INTERRUPT_TX BIT(10) +#define SDXC_IDMAC_HOST_ABORT_INTERRUPT_RX BIT(10) That duplicate BIT(10) looks fishy. Päikest, Priit Laes :) -- You received this message because you are subscribed to the Google Groups linux-sunxi group. To unsubscribe from this group and stop

Re: [linux-sunxi] [PATCH v6 07/18] ahci-platform: Library-ise ahci_probe functionality

2014-02-19 Thread Priit Laes
Ühel kenal päeval, K, 19.02.2014 kell 13:01, kirjutas Hans de Goede: ahci_probe consists of 3 steps: 1) Get resources (get mmio, clks, regulator) 2) Enable resources, handled by ahci_platform_enable_resouces 3) The more or less standard ahci-host controller init sequence ... diff --git

Re: [linux-sunxi] [PATCH v6 09/18] ARM: sunxi: Add support for Allwinner SUNXi SoCs sata to ahci_platform

2014-02-19 Thread Priit Laes
AHCI_RWCR 0x00fc Duplicate 0x00fc Päikest, Priit Laes :) -- You received this message because you are subscribed to the Google Groups linux-sunxi group. To unsubscribe from this group and stop receiving emails from it, send an email to linux-sunxi+unsubscr...@googlegroups.com. For more options

Re: [linux-sunxi] [PATCH 3/7] ARM: dt: sun4i: Add A10 SPI controller nodes

2014-02-23 Thread Priit Laes
Ühel kenal päeval, P, 23.02.2014 kell 15:53, kirjutas Runzhong Yi: Hi, Excuse me, could you tell me to which branch is this patch for ? How is the maturity of device tree support? Do i still need .fex file? This is for upstream/mainline kernel (3.15+) and is fully a devicetree driver. No

Re: [linux-sunxi] Re: Build sunxi-next for A20

2014-03-06 Thread Priit Laes
Ühel kenal päeval, K, 05.03.2014 kell 23:31, kirjutas hmandevt...@gmail.com: Hi Priit, You need at least version 3.12 of Linus' tree because support for A20-OLinuXino was only added then: http://linux-sunxi.org/Mainlining_Effort To test the latest goodness like SATA and USB follow this

Re: [linux-sunxi] Re: Build sunxi-next for A20

2014-03-06 Thread Priit Laes
. I'm using HDMI video output Did you even follow the links we gave you before? Mainline kernel is currently missing some of the drivers, most notable of them would be lack of display support (hdmi, vga, etc). What you get from mainline (or sunxi-next) is just a headless server. Päikest, Priit

Re: [linux-sunxi] Re: Build sunxi-next for A20

2014-03-06 Thread Priit Laes
Ühel kenal päeval, N, 06.03.2014 kell 02:31, kirjutas hmandevt...@gmail.com: Priit i understand, do you know when is planned release of next stable kernel ? 3.4 branch can be considered stable. Mainline releases happen when Linus decides to release one (every few months). or a roadmap ?

Re: Default initrd and fdt load behaviour on ARM (Was: Re: [linux-sunxi] Re: Not able to boot ramdisk on cubietruck)

2014-03-11 Thread Priit Laes
anyone else runs into this. The http://linux-sunxi.org/Mainline_Kernel_Howto did mention this ;) but thanks for helping remind people! Actually it mentions fdt_high but not initrd_high. Please document it there. Päikest, Priit Laes -- You received this message because you are subscribed

Re: [linux-sunxi] [PATCH v3 06/10] regulator: AXP20x: Add support for regulators subsystem

2014-03-28 Thread Priit Laes
= axp20x_set_suspend_voltage, +}; Why two of these? (axp20x_ops and axp20x_ops_table) [..] Päikest, Priit Laes :) -- You received this message because you are subscribed to the Google Groups linux-sunxi group. To unsubscribe from this group and stop receiving emails from it, send an email to linux-sunxi+unsubscr

Re: [linux-sunxi] [PATCH v2] sunxi: Add support for consumer infrared devices

2014-04-28 Thread Priit Laes
-sunxi.org); Typo in Alexsey's last name. Thanks for working on this :) Päikest, Priit Laes :) -- You received this message because you are subscribed to the Google Groups linux-sunxi group. To unsubscribe from this group and stop receiving emails from it, send an email to linux-sunxi+unsubscr

Re: [linux-sunxi] [PATCH 04/10] sunxi: log failure of sunxi_?mac_initialize.

2014-04-28 Thread Priit Laes
Ühel kenal päeval, E, 28.04.2014 kell 20:18, kirjutas Ian Campbell: Also propagate errors. Requested by Marek as part of upstream review. Signed-off-by: Ian Campbell i...@hellion.org.uk --- arch/arm/cpu/armv7/sunxi/board.c | 15 +-- drivers/net/sunxi_gmac.c | 6

Re: [linux-sunxi] [PATCH v5 0/3] ARM: sunxi: Add support for consumer infrared devices

2014-04-30 Thread Priit Laes
Ühel kenal päeval, K, 30.04.2014 kell 21:16, kirjutas Alexander Bersenev: This patch introduces Consumer IR(CIR) support for sunxi boards. This is based on Alexsey Shestacov's work based on the original driver supplied by Allwinner. Signed-off-by: Alexander Bersenev b...@hackerdom.ru

Re: [linux-sunxi] Re: [PATCH v2 3/7] mfd: add support for sun6i PRCM (Power/Reset/Clock Management) unit

2014-05-08 Thread Priit Laes
/mfd/core.h I'm pretty sure you don't need half of these. Please only add the ones you make use of. Sure (this is what happens when you copy/paste from another driver :-)) Also, alphabetic order would be nice. Päikest, Priit Laes :) -- You received this message because you are subscribed

Re: [linux-sunxi] A13 USB OTG

2014-05-29 Thread Priit Laes
-sunxi.org/Mainlining_Effort Päikest, Priit Laes :) -- You received this message because you are subscribed to the Google Groups linux-sunxi group. To unsubscribe from this group and stop receiving emails from it, send an email to linux-sunxi+unsubscr...@googlegroups.com. For more options, visit

Re: [linux-sunxi] Re: gslx680 driver ported to sunxi

2014-06-03 Thread Priit Laes
Ühel kenal päeval, T, 03.06.2014 kell 20:10, kirjutas Joe Burmeister: yer!!! \o/ I'll add your firmware to the others. I take it this is still with the 3.0 kernel? Can you humour me and try 3.4 with the suspend and Android stuff removed? It is works with Android without the untested

Re: [linux-sunxi] [PATCH v2 2/5] sunxi: add USB EHCI driver

2014-07-16 Thread Priit Laes
Ühel kenal päeval, T, 15.07.2014 kell 23:56, kirjutas Roman Byshko: Signed-off-by: Roman Byshko rbys...@gmail.com --- drivers/usb/host/Makefile | 1 + drivers/usb/host/ehci-sunxi.c | 212 ++ 2 files changed, 213 insertions(+) create mode

Re: [linux-sunxi] Re: Running Linux on a Jesurun A19 Android media player

2014-09-11 Thread Priit Laes
, because you're the one who actually has the device. Päikest, Priit Laes :) -- You received this message because you are subscribed to the Google Groups linux-sunxi group. To unsubscribe from this group and stop receiving emails from it, send an email to linux-sunxi+unsubscr...@googlegroups.com

Re: [linux-sunxi] [PATCH 3/6] phy: Add driver to support individual USB PHYs on sun9i

2014-11-03 Thread Priit Laes
On Tue, 2014-11-04 at 12:07 +0800, Chen-Yu Tsai wrote: Unlike previous Allwinner SoCs, there is no central PHY control block on the A80. Also, OTG support is completely split off into a different controller. This adds a new driver to support the regular USB PHYs. Signed-off-by: Chen-Yu

Re: [linux-sunxi] [PATCH 2/3] drivers:input:ps2 Added sunxi A20 ps2 driver, changed makefile and Kconfig

2014-12-03 Thread Priit Laes
On Thu, 2014-12-04 at 04:23 +0530, vishnupatekar wrote: --- drivers/input/serio/Kconfig |9 ++ drivers/input/serio/Makefile|1 + drivers/input/serio/sunxi-ps2.c | 305 +++ 3 files changed, 315 insertions(+) create mode 100644

[linux-sunxi] [PATCH] arm: sunxi: input: RFC: Add sysfs voltage for sun4i-lradc driver

2015-01-26 Thread Priit Laes
+Date: February 2015 +Contact: Priit Laes pl...@plaes.org +Description: ADC output voltage in microvolts or 0 if device is not opened. diff --git a/drivers/input/keyboard/sun4i-lradc-keys.c b/drivers/input/keyboard/sun4i-lradc-keys.c index cc8f7dd..c0ab8ec 100644 --- a/drivers

[linux-sunxi] [PATCH v3] ARM: dts: sun4i: Add initial dts for Gemei G9 tablet

2015-01-26 Thread Priit Laes
MicroUSB host port and 3.5mm headphone jack. Changes since v2: * Fix syntax error (brown paper bag release) Changes since v1: * Added sun4i-lradc keymap * Added TODO note about missing IRQ pins for bma250 * Fixed formatting issues and removed external URLs Signed-off-by: Priit Laes pl

[linux-sunxi] [PATCH v2] ARM: dts: sun4i: Add initial dts for Gemei G9 tablet

2015-01-26 Thread Priit Laes
MicroUSB host port and 3.5mm headphone jack. Changes since v1: * Added sun4i-lradc keymap * Added TODO note about missing pins * Fixed formatting issues and removed external URLs Signed-off-by: Priit Laes pl...@plaes.org --- arch/arm/boot/dts/Makefile | 6 +- arch/arm/boot/dts

[linux-sunxi] [PATCH] sunxi: Add Gemei G9 (Allwinner A10/sun4i) tablet

2015-01-19 Thread Priit Laes
MicroUSB host port and 3.5mm headphone jack. More details are available at: http://linux-sunxi.org/Gemei_G9 Signed-off-by: Priit Laes pl...@plaes.org --- board/sunxi/MAINTAINERS | 5 + configs/sunxi_Gemei_G9_defconfig | 20 2 files changed, 25 insertions

Re: [linux-sunxi] Re: [PATCH] sunxi: Add Gemei G9 (Allwinner A10/sun4i) tablet

2015-01-22 Thread Priit Laes
On Thu, 2015-01-22 at 09:47 +0200, Siarhei Siamashka wrote: On Tue, 20 Jan 2015 15:43:31 +0100 Hans de Goede hdego...@redhat.com wrote: Hi, [...] We have already talked with plaes on IRC yesterday, just now bringing it here. I have finally updated the http://linux-sunxi.org/LCD page

Re: [linux-sunxi] [UBOOT] Both Linux-Sunxi and Mainline Uboot have issues

2015-02-18 Thread Priit Laes
On Wed, 2015-02-18 at 22:29 -0800, TsvetanUsunov wrote: Hi For A13-OLinuxino till now we conservatively used the Linux-Sunxi uboot, but we recently got new lot of Samsung memories and we decided to tweak some parameters for this DDR in Linux-Sunxi uboot and found problems. As this

Re: [linux-sunxi] Observations about the Neal Peacock PengPod1000 Tablets

2015-02-19 Thread Priit Laes
On Thu, 2015-02-19 at 15:36 -0500, Don Warner Saklad wrote: Dmitriy B rzk...@gmail.com writes: PengPod had own wiki in 2012 where all info was located. Thats why users can't get help now. If any of you kind folks out there happen upon a version downloaded of the PengPod

Re: [linux-sunxi] Re: [PATCH] arm: sunxi: input: RFC: Add sysfs voltage for sun4i-lradc driver

2015-01-27 Thread Priit Laes
On Tue, 2015-01-27 at 10:18 +0100, Maxime Ripard wrote: Hi, On Mon, Jan 26, 2015 at 06:58:32PM +0200, Priit Laes wrote: --- Like Hans was pointing out, commit log and signed-off-by please .../ABI/testing/sysfs-driver-input-sun4i-lradc | 4 ++ drivers/input/keyboard/sun4i

Re: [linux-sunxi] Re: [U-Boot] [PATCH v2] sunxi: Add Linksprite_pcDuino3_Nano board / defconfig

2015-01-28 Thread Priit Laes
On Wed, 2015-01-28 at 10:54 +0100, Hans de Goede wrote: Hi, On 26-01-15 23:35, Adam Sampson wrote: This is a low-cost Allwinner A20 board with Arduino-style GPIO headers; it features 1G RAM, 4G NAND flash, 1 micro-SD, 2 USB sockets, 1 micro USB socket for OTG and another for power in,

Re: [linux-sunxi] [PATCH v4] dma: sun4i: Add support for the DMA engine on sun[457]i SoCs

2015-02-01 Thread Priit Laes
On Sat, 2015-01-31 at 19:58 -0300, Emilio López wrote: This patch adds support for the DMA engine present on Allwinner A10, A13, A10S and A20 SoCs. This engine has two kinds of channels: normal and dedicated. The main difference is in the mode of operation; while a single normal channel may

Re: [linux-sunxi] Inet K970,A20,linux-sunxi -- nand driver kernel panic

2015-01-11 Thread Priit Laes
On Sun, 2015-01-11 at 12:55 +0100, Lars Doelle wrote: Hi everyone, the boot log shows a very unhappy nand driver. What kernel version? -- [0.682894] Division by zero in kernel. [0.689714] [c001540c] (unwind_backtrace+0x0/0x12c) from [c03d41f8] (Ldiv0+0x8/0x10) [0.696123]

Re: [linux-sunxi] A20 mainline kernel -- buttons and power information

2015-01-14 Thread Priit Laes
On Wed, 2015-01-14 at 11:42 +0100, Lars Doelle wrote: Hi everyone, tuning device configuration for [[Inet K970]], I did not yet find switches in the mainline kernel for the following features: 1) sunxi-keyboard This provides an event device for the buttons of the tablet. Since this

Re: [linux-sunxi] GSL1680 on A20

2015-03-12 Thread Priit Laes
On Wed, 2015-03-11 at 20:08 -0300, Leonardo wrote: Hello everybody. I'm having such a hard time trying to get the GSL1680 touch panel working on my A20 device. Actually it's a INET K70 tablet and I would like to replace it's Android for a full Linux distro. This one?

Re: [linux-sunxi] Basic A33 support including dram init available in my personal repo

2015-03-02 Thread Priit Laes
On Mon, 2015-03-02 at 22:36 +0100, Henrik Nordström wrote: mån 2015-03-02 klockan 00:12 +0530 skrev Vishnu Patekar: Allwinner A33 tablets comes with the libdram binary, fortunately I've found the libdram code at

Re: [linux-sunxi] Derailed thread

2015-03-05 Thread Priit Laes
at 02:31:41PM +0200, Simos Xenitellis wrote: Simos, Simos, please stop it. And you failed to respond to Luc's points. PS. Mediatek developers are contributing to mainline kernel. Päikest, Priit Laes -- You received this message because you are subscribed to the Google Groups

Re: [linux-sunxi] Allwinner GPL violations: definitive proof.

2015-02-25 Thread Priit Laes
, Simos Being ignorant makes you.. ? https://github.com/allwinner-zh/bootloader/issues Päikest, Priit Laes :) -- You received this message because you are subscribed to the Google Groups linux-sunxi group. To unsubscribe from this group and stop receiving emails from it, send an email

Re: [linux-sunxi] Re: Demo h264 encoding app

2015-04-03 Thread Priit Laes
On Fri, 2015-04-03 at 12:07 +0530, Vishal B wrote: R, Are you saying that The TV-IN section does not have a driver implemented as yet? Looking into the kernel sources, i find drivers/media/video/sunxi- csi/ directory which i believe contains the drivers for the TV-IN section.

Re: [linux-sunxi] Re: UART SIR mode register

2015-05-10 Thread Priit Laes
On Sat, 2015-05-09 at 05:52 -0700, stul...@gmail.com wrote: On Friday, May 8, 2015 at 12:31:52 PM UTC+3, stu...@gmail.com wrote: Dear All; I would like to enable SIR mode in UART modem control register for only one of my UART ports. I am planning to transceive IrDa by using that

Re: [linux-sunxi] Re: UART SIR mode register

2015-05-10 Thread Priit Laes
On Sun, 2015-05-10 at 19:01 +0300, Sertac Tüllük wrote: Thank you so much for your answer. You are also right about the question might be incomplete ( If so, pls let me know after re -reading my e-mail, and checking 8250-sunxi.c file in current kernel, and explaining by what is the relation

Re: [linux-sunxi] New firmware for GSL1680

2015-05-18 Thread Priit Laes
On Sun, 2015-05-17 at 18:31 -0700, sergk.ad...@gmail.com wrote: Hello. Could anyone share or describe the way how to extract it firmware for GSL1680 on 8 with 800x1280? Did you check our wiki: http://linux-sunxi.org/GSL1680 ? It includes link to the following repository which should have

Re: [linux-sunxi] sunxi-kms driver

2015-04-10 Thread Priit Laes
On Fri, 2015-04-10 at 22:04 +0200, David Lanzendörfer wrote: Hi I'm right now building a KMS driver using the HDMI interface as primary connector: http://git.o2s.ch/?p=linux-next.git;a=shortlog;h=refs/heads/20150327 /* git clone http://git.o2s.ch/git/linux-next.git git

Re: [linux-sunxi] [PATCH 0/8] mfd/power/phy: Add support for otg vbus detection via axp pmic

2015-06-10 Thread Priit Laes
On Tue, 2015-06-09 at 23:37 +0200, Hans de Goede wrote: Hi All, Here is a series which adds the beginning of power-supply support to the axp20x pmic code. My primary reason for working on this is to enable the use of the usb power-supply bits in the pmic to for vbus detection on boards

Re: [linux-sunxi] Adding upstream u-boot/kernel support for Lamobo R1?

2015-06-22 Thread Priit Laes
related to b53 driver problems). What's missing to get it supported upstream? Patches :) Päikest, Priit Laes :) -- You received this message because you are subscribed to the Google Groups linux-sunxi group. To unsubscribe from this group and stop receiving emails from it, send an email

Re: [linux-sunxi] openwrt finally released for sunxi

2015-06-25 Thread Priit Laes
/Mainlining_Effort#Work_In_Progress Päikest, Priit Laes :) -- You received this message because you are subscribed to the Google Groups linux-sunxi group. To unsubscribe from this group and stop receiving emails from it, send an email to linux-sunxi+unsubscr...@googlegroups.com. For more options, visit

Re: [linux-sunxi] Banana Pi M2 (A31s based) ready to donate

2015-06-18 Thread Priit Laes
EOL'd by Allwinner and is a dead end. [1] https://olimex.wordpress.com/2015/05/18/a31-som-update/ Though, someone from Allwinner should confirm that for us too ;) Päikest, Priit Laes :) -- You received this message because you are subscribed to the Google Groups linux-sunxi group

Re: [linux-sunxi] Re: External Interrupts with sun6i / sun8i

2015-05-29 Thread Priit Laes
delay. Can you retest later today ? Thanks, Gustavo Zamboni Le 27/05/2015 07:35, Lawrence Yu a écrit : Hi, On Tue, May 26, 2015 at 10:17 PM, Priit Laes pl...@plaes.org wrote: On Wednesday, May 27, 2015 at 5:53:06 AM UTC+3, Lawrence Y wrote: Hi

[linux-sunxi] Re: External Interrupts with sun6i / sun8i

2015-05-26 Thread Priit Laes
On Wednesday, May 27, 2015 at 5:53:06 AM UTC+3, Lawrence Y wrote: Hi, Hi! I was wondering if there was an example of a dts that used external interrupts with the sun6i or sun8i chips? I've been trying to configure an external interrupt on PA23 with no luck so far. I looked through

Re: [linux-sunxi] Lemon Pi on Indiegogo campaign,$35 ARM Quad-core A9 and Imagination PowerVR SGX544 open source board

2015-05-26 Thread Priit Laes
On Wed, 2015-05-27 at 06:32 +0800, Embed Studio wrote: SDK is being prepared. you know, Lemon Pi is on campaign process. Everything including code/document/datasheet/hardware material etc. will be availabel as soon as possible. I don't think that neither You (EmbedStudio) or Actions Semi

Re: [linux-sunxi] Fwd: New realtek wifi driver in linux 4.4

2015-11-11 Thread Priit Laes
On Wed, 2015-11-11 at 10:28 +0100, Benjamin Henrion wrote: > Just to say linux 4.4 has a new realtek wifi driver, which is present > on many sunxi boards: > > http://www.phoronix.com/scan.php?page=news_item=Linux-4.4- > Networking I have tested it out with RTL8188CUS chip and it seems to be a

Re: [linux-sunxi] Re: [PATCH v3 3/3] ARM: dts: sun4i: gemei-g9: Enable sun4i audio codec support

2015-11-12 Thread Priit Laes
On Mon, 2015-11-09 at 11:59 +0800, Chen-Yu Tsai wrote: > On Sat, Nov 7, 2015 at 1:54 AM, Priit Laes <pl...@plaes.org> wrote: > > Gemei G9 has internal speakers and headphone jack. Audio switching > > from internal speakers to headphones is automatically handled by > > ex

[linux-sunxi] [PATCH v3 2/3] ARM: dts: sun4i: gemei-g9: Use reg_ldo2 instead of reg_vcc3v0

2015-11-06 Thread Priit Laes
ADC seems to be using ldo2 for reference voltage. Signed-off-by: Priit Laes <pl...@plaes.org> --- arch/arm/boot/dts/sun4i-a10-gemei-g9.dts | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/arch/arm/boot/dts/sun4i-a10-gemei-g9.dts b/arch/arm/boot/dts/sun4i-a10-gemei-

[linux-sunxi] [PATCH v3 3/3] ARM: dts: sun4i: gemei-g9: Enable sun4i audio codec support

2015-11-06 Thread Priit Laes
Gemei G9 has internal speakers and headphone jack. Audio switching from internal speakers to headphones is automatically handled by extra FT2012Q audio amplifier chip that works out of the box. Signed-off-by: Priit Laes <pl...@plaes.org> --- Changes since v2: - Dropped routing property.

[linux-sunxi] [PATCH v3 0/3] ARM: dts: sun4i: gemei-g9: Devicetree improvements

2015-11-06 Thread Priit Laes
use driver is not yet ready - Dropped applied KEYBOARD_SUN4I_LRADC patch - Added sun4i audio codec patch Priit Laes (3): ARM: dts: sun4i: gemei-g9: Convert to use axp209 regulator nodes ARM: dts: sun4i: gemei-g9: Use reg_ldo2 instead of reg_vcc3v0 ARM: dts: sun4i: gemei-g9: Enable sun4i a

[linux-sunxi] [PATCH v3 1/3] ARM: dts: sun4i: gemei-g9: Convert to use axp209 regulator nodes

2015-11-06 Thread Priit Laes
Add regulator nodes for axp209 using the axp209.dtsi include. Signed-off-by: Priit Laes <pl...@plaes.org> --- Changes in v3: - Drop the ohci0 node. It's not needed. Changes in v2: - Add the ohci0 node. arch/arm/boot/dts/sun4i-a10-gemei-g9.dts | 35

Re: [linux-sunxi] NAND flashing support for Cubietruck using FEL and U-Boot

2015-10-12 Thread Priit Laes
flash.sh > [2] https://github.com/jwrdegoede/u-boot-sunxi/tree/sunxi-wip > [3] https://gist.github.com/pietrushnic/b2eeb1f8c4e40d687939 > I have successfully done it via mainline kernel from Hans's WIP branch using mdt-utils like this: http://lists.denx.de/pipermail/u-boot/2015-M ay/214959

Re: [linux-sunxi] Re: [PATCH] ARM: dts: sun4i: Add dts file for the pov protab2-ips9 tablet

2015-09-07 Thread Priit Laes
On Mon, 2015-09-07 at 09:05 +0200, Hans de Goede wrote: > Hi, > > On 06-09-15 18:30, Maxime Ripard wrote: > > On Sat, Sep 05, 2015 at 10:21:59AM +0200, Hans de Goede wrote: > > > The Point of View protab2-ips9 is a tablet with a 9" ips 1024x768 > > > lcd screen, > > > microsd slot, headphones,

Re: [linux-sunxi] Re: [PATCH] ARM: dts: sun4i: Add dts file for the pov protab2-ips9 tablet

2015-09-07 Thread Priit Laes
On Mon, 2015-09-07 at 10:49 +0200, Hans de Goede wrote: > Hi, > > On 07-09-15 09:49, Priit Laes wrote: > > On Mon, 2015-09-07 at 09:05 +0200, Hans de Goede wrote: > > > Hi, > > > > > > On 06-09-15 18:30, Maxime Ripard wrote: > > > > On Sat,

[linux-sunxi] sunxi nand oops when unloading the module

2015-09-13 Thread Priit Laes
0x2267 0x7da3 0x4e3d 0x1338 0x50db 0x454d 0x764d 0x40a3 0x42e6 0x262b 0x2d2e 0x1aea 0x2e17 0x173d 0x3a6e 0x71bf 0x25f9 0x0a5d 0x7c57 0x0fbe 0x46ce 0x4939 0x6b17 0x37bb 0x3e91 0x76db>; };

Re: [linux-sunxi] [PATCH] mtd: nand: sunxi: fix sunxi_nand_chips_cleanup()

2015-09-13 Thread Priit Laes
On Sun, 2015-09-13 at 18:14 +0200, Boris Brezillon wrote: > The sunxi_nand_chips_cleanup() function is missing a call to > list_del() > which generates a double free error. Tested-by: Priit Laes <pl...@plaes.org> > > Reported-by: Priit Laes <pl...@plaes.org> >

[linux-sunxi] [PATCH] ARM: sunxi_defconfig: Enable LRADC keys (KEYBOARD_SUN4I_LRADC)

2015-09-16 Thread Priit Laes
Signed-off-by: Priit Laes <pl...@plaes.org> --- arch/arm/configs/sunxi_defconfig | 1 + 1 file changed, 1 insertion(+) diff --git a/arch/arm/configs/sunxi_defconfig b/arch/arm/configs/sunxi_defconfig index 51eea22..94c6bd0 100644 --- a/arch/arm/configs/sunxi_defconfig +++ b/arch/arm/c

Re: [linux-sunxi] [PATCH 3/4] ARM: dts: sun4i: gemei-g9: Enable NAND Flash controller on Gemei G9

2015-09-16 Thread Priit Laes
On Wed, 2015-09-16 at 10:59 +0300, Priit Laes wrote: > Signed-off-by: Priit Laes <pl...@plaes.org> Please ignore this patch for now, apparently this device has 2 NAND chips, and I'm including only one of them. > --- >  arch/arm/boot/dts/sun4i-a10-ge

[linux-sunxi] [PATCH 2/4] ARM: dts: sun4i: gemei-g9: Convert to use axp209 regulator nodes

2015-09-16 Thread Priit Laes
Signed-off-by: Priit Laes <pl...@plaes.org> --- arch/arm/boot/dts/sun4i-a10-gemei-g9.dts | 35 1 file changed, 31 insertions(+), 4 deletions(-) diff --git a/arch/arm/boot/dts/sun4i-a10-gemei-g9.dts b/arch/arm/boot/dts/sun4i-a10-gemei-g9.dts index c

[linux-sunxi] [PATCH 3/4] ARM: dts: sun4i: gemei-g9: Enable NAND Flash controller on Gemei G9

2015-09-16 Thread Priit Laes
Signed-off-by: Priit Laes <pl...@plaes.org> --- arch/arm/boot/dts/sun4i-a10-gemei-g9.dts | 62 +++- 1 file changed, 61 insertions(+), 1 deletion(-) diff --git a/arch/arm/boot/dts/sun4i-a10-gemei-g9.dts b/arch/arm/boot/dts/sun4i-a10-gemei-g9.dts index aafe771..0

[linux-sunxi] [PATCH 1/4] ARM: dts: sun4i: gemei-g9: Add accelerometer (bma250) IRQ

2015-09-16 Thread Priit Laes
Signed-off-by: Priit Laes <pl...@plaes.org> --- arch/arm/boot/dts/sun4i-a10-gemei-g9.dts | 11 --- 1 file changed, 4 insertions(+), 7 deletions(-) diff --git a/arch/arm/boot/dts/sun4i-a10-gemei-g9.dts b/arch/arm/boot/dts/sun4i-a10-gemei-g9.dts index ad4b65c..c0006b8 100644 ---

[linux-sunxi] [PATCH 4/4] ARM: dts: sun4i: gemei-g9: Use reg_ldo2 instead of reg_vcc3v0

2015-09-16 Thread Priit Laes
Apparently reg_ldo2 seems to be supplying the correct reference voltage to ADC. Signed-off-by: Priit Laes <pl...@plaes.org> --- arch/arm/boot/dts/sun4i-a10-gemei-g9.dts | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/arch/arm/boot/dts/sun4i-a10-gemei-g9.dts b/arch/ar

[linux-sunxi] [PATCH v2 1/4] ARM: dts: sun4i: gemei-g9: Add accelerometer (bma250) IRQ

2015-09-23 Thread Priit Laes
Add IRQ configuration for bma250 accelerometer. Signed-off-by: Priit Laes <pl...@plaes.org> --- arch/arm/boot/dts/sun4i-a10-gemei-g9.dts | 11 --- 1 file changed, 4 insertions(+), 7 deletions(-) diff --git a/arch/arm/boot/dts/sun4i-a10-gemei-g9.dts b/arch/arm/boot/dts/sun4i-a10

[linux-sunxi] [PATCH v2 4/4] ARM: dts: sun4i: gemei-g9: Enable sun4i audio codec support

2015-09-23 Thread Priit Laes
Gemei G9 has internal speakers and headphone jack. Audio switching from internal speakers to headphones is automatically handled by extra FT2012Q audio amplifier chip that works out of the box. Signed-off-by: Priit Laes <pl...@plaes.org> --- arch/arm/boot/dts/sun4i-a10-gemei-g9.d

[linux-sunxi] [PATCH v2 3/4] ARM: dts: sun4i: gemei-g9: Use reg_ldo2 instead of reg_vcc3v0

2015-09-23 Thread Priit Laes
ADC seems to be using ldo2 for reference voltage. Signed-off-by: Priit Laes <pl...@plaes.org> --- arch/arm/boot/dts/sun4i-a10-gemei-g9.dts | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/arch/arm/boot/dts/sun4i-a10-gemei-g9.dts b/arch/arm/boot/dts/sun4i-a10-gemei-

[linux-sunxi] [PATCH v2 0/4] ARM: dts: sun4i: gemei-g9: Devicetree improvements

2015-09-23 Thread Priit Laes
KEYBOARD_SUN4I_LRADC patch - Added sun4i audio codec patch Priit Laes (4): ARM: dts: sun4i: gemei-g9: Add accelerometer (bma250) IRQ ARM: dts: sun4i: gemei-g9: Convert to use axp209 regulator nodes ARM: dts: sun4i: gemei-g9: Use reg_ldo2 instead of reg_vcc3v0 ARM: dts: sun4i: gemei-g9: Enable sun4i

[linux-sunxi] [PATCH v2 2/4] ARM: dts: sun4i: gemei-g9: Convert to use axp209 regulator nodes

2015-09-23 Thread Priit Laes
Add regulator nodes for axp209 by including the axp209 dtsi. Changes in v2: - Add the ohci0 node. Signed-off-by: Priit Laes <pl...@plaes.org> --- arch/arm/boot/dts/sun4i-a10-gemei-g9.dts | 39 1 file changed, 35 insertions(+), 4 deletions(-) diff --git

Re: [linux-sunxi] [PATCH 0/2] ASoC: Add support for the Allwinner A10 codec

2015-09-22 Thread Priit Laes
On Sat, 2015-09-12 at 15:26 +0200, Maxime Ripard wrote: > Hi everyone, > > This patch set adds the support for what Allwinner calls the codec on > their SoCs. > > This codec is actually a combination of a codec and DAI, tied > together > in a single memory-mapped IP. It is completely standalone,

Re: [linux-sunxi] [PATCH 01/23] mtd: kill the ecclayout->oobavail field

2015-12-07 Thread Priit Laes
; >   else >   oobsize = mtd->oobsize; >   > @@ -2063,7 +2063,7 @@ static int onenand_write_oob_nolock(struct > mtd_info *mtd, loff_t to, >   ops->oobretlen = 0; >   >   if (mode == MTD_OPS_AUTO_OOB) > - oobsize = t

Re: [linux-sunxi] Mainline Linux git setup and usage

2015-12-05 Thread Priit Laes
-email doesn't exist (git version 2.1.4). This is probably your distribution (or operating system) related problem. > [.. ] Päikest, Priit Laes ;) -- You received this message because you are subscribed to the Google Groups "linux-sunxi" group. To unsubscribe from this group and stop rece

[linux-sunxi] [PATCH 0/2] input: Driver for Goodix GT801 2+1 touchscreen

2015-12-06 Thread Priit Laes
. Patch 1 (Gemei G9 devicetree bits) should go via linux-sunxi tree. Patch 2 (GT801 2+1 driver implementation) via linux-input Priit Laes (2): ARM: dts: sun4i: gemei-g9: Add touchscreen (Goodix gt801x2) support input: gt801_2plus1 - Add initial support for Goodix GT801 2+1 .../bindings/input

[linux-sunxi] [PATCH 1/2] ARM: dts: sun4i: gemei-g9: Add touchscreen (Goodix gt801x2) support

2015-12-06 Thread Priit Laes
Goodix GT801 2+1 is a touchscreen controller supporting up to 10 touches. Enable pin and wakeup pin support is currently not implemented: - enable pin (PI16, specified in FEX) seems to be wrong - wakeup pin needs some additional reverse engineering work Signed-off-by: Priit Laes <

[linux-sunxi] [PATCH 2/2] input: gt801_2plus1 - Add initial support for Goodix GT801 2+1

2015-12-06 Thread Priit Laes
This patch adds Goodix GT801 2+1 touchscreen controller support. GT801 2+1 is a 10-finger touch controller consisting of ARM controller interfacing two GT801 5-finger controllers. Signed-off-by: Priit Laes <pl...@plaes.org> --- .../bindings/input/touchscreen/gt801_2plus1.txt

[linux-sunxi] Re: [PATCH 2/2] input: gt801_2plus1 - Add initial support for Goodix GT801 2+1

2015-12-07 Thread Priit Laes
gt; > > > [auto build test WARNING on mripard/sunxi/for-next] > > [also build test WARNING on next-20151203] > > [cannot apply to input/next v4.4-rc4] > > > > url:    https://github.com/0day-ci/linux/commits/Priit-Laes/input-D > river-for-Goodix-GT801-2-1-touchsc

[linux-sunxi] [PATCH] ARM: dts: sun4i: gemei-g9: Enable PA GPIO pin configuration

2015-12-11 Thread Priit Laes
PA GPIO pin (PH15) controls power to external amplifier (FT2012Q). This patch depends on 'ASoC: sun4i-codec: Add support for PA gpio pin' authored by Hans de Goede. Priit Laes (1): ARM: dts: sun4i: gemei-g9: Enable PA GPIO pin configuration arch/arm/boot/dts/sun4i-a10-gemei-g9.dts | 14

[linux-sunxi] [PATCH] ARM: dts: sun4i: gemei-g9: Enable PA GPIO pin configuration

2015-12-11 Thread Priit Laes
PA GPIO pin (PH15) controls power to external amplifier (FT2012Q). Signed-off-by: Priit Laes <pl...@plaes.org> --- arch/arm/boot/dts/sun4i-a10-gemei-g9.dts | 14 +- 1 file changed, 13 insertions(+), 1 deletion(-) diff --git a/arch/arm/boot/dts/sun4i-a10-gemei-g9.dts b/arch/ar

Re: [linux-sunxi] [PATCH v2] spi: dts: sun4i: Add support for inter-word wait cycles using the SPI Wait Clock Register

2015-12-12 Thread Priit Laes
On Fri, 2015-12-11 at 23:45 +0100, Marcus Weseloh wrote: [...] > > diff --git a/Documentation/devicetree/bindings/spi/spi-sun4i.txt > b/Documentation/devicetree/bindings/spi/spi-sun4i.txt > index de827f5..d6c55fc 100644 > --- a/Documentation/devicetree/bindings/spi/spi-sun4i.txt > +++

Re: [linux-sunxi] Re: [PATCH RFC 0/2] Olimex A20-SOM-EVB: LRADC-keys and MMC3

2015-12-09 Thread Priit Laes
ces: > >   /dev/input/event0:  1c22800.lradc > >   Select the device event number [0-0]: > > > > [pressing keys several times, but no output] > > > >   ^C > I have previously used `evtest` utility to check whether the keypress settings are correct. Debian

Re: [linux-sunxi] Requesting Help on a USD15, Allwinner Quadcore 1.2Ghz 64-bit A53 Hardware

2015-11-28 Thread Priit Laes
On Sat, 2015-11-28 at 17:43 -0800, KH Goh wrote: [...] > In terms of the hardware, at the moment we are having 2 unit of > Pine64 Engineering board (Please refer here for the > spec http://pine64.com/product ), and would like to donate it to the > community for further evaluation and testing.

Re: [linux-sunxi] [PATCH v3 2/2] phy-sun4i-usb: Add support for the host usb-phys found on the H3 SoC

2015-12-01 Thread Priit Laes
On Wed, 2015-11-25 at 17:50 +0100, Hans de Goede wrote: > From: Reinder de Haan > > Note this commit only adds support for phys 1-3, phy 0, the otg phy, > is > not yet (fully) supported after this commit. > > Signed-off-by: Reinder de Haan >

Re: [linux-sunxi] [PATCH] thermal: Add support for Sunxi THS on the Allwinner H3

2015-11-18 Thread Priit Laes
> clock > frequency). No magic involved. > > Currently the H3 manual is available from Orange Pi people and > OLIMEX. > There is also an open request about releasing it "officially": > https://github.com/allwinner-zh/documents/issues/9 Yeah, you can find links t

Re: [linux-sunxi] [PATCH 2/5] phy-sun4i-usb: Add support for the host usb-phys found on the H3 SoC

2015-11-20 Thread Priit Laes
On Sun, 2015-11-15 at 20:46 +0100, Hans de Goede wrote: > From: Reinder de Haan > > Note this commit only adds support for phys 1-3, phy 0, the otg phy, > is > not yet (fully) supported after this commit. This patch seems to be causing following compile warning: In file

Re: [linux-sunxi] Re: [PATCH 5/5] RFC spi: sun4i: add DMA support

2016-06-01 Thread Priit Laes
On Wed, 2016-06-01 at 20:00 +0200, Maxime Ripard wrote: > Hi, > > On Mon, May 30, 2016 at 04:50:16PM +0100, Mark Brown wrote: > > > > On Mon, May 30, 2016 at 05:28:10PM +0200, Michal Suchanek wrote: > > > > > > On 30 May 2016 at 17:03, Mark Brown wrote: > > > > > > > > >

Re: [linux-sunxi] Unreliable boot on Mele-A2000

2016-06-15 Thread Priit Laes
that the boot succeeds about 1/3 of the time. Could you post some logs on how it fails? Päikest, Priit Laes :) -- You received this message because you are subscribed to the Google Groups "linux-sunxi" group. To unsubscribe from this group and stop receiving emails from it, send an

Re: [linux-sunxi] [PATCH v2 05/26] clk: sunxi: Add display and TCON0 clocks driver

2016-01-16 Thread Priit Laes
ot;clock-output-names", _name); > + > + reg = of_io_request_and_map(node, 0, of_node_full_name(node)); > + if (IS_ERR(reg)) { > + pr_err("%s: Could not map the clock registers\n", clk_name); > + return; > + } ... Thanks for w

Re: [linux-sunxi] [PATCH v2 16/26] drm: Add Allwinner A10 Display Engine support

2016-01-17 Thread Priit Laes
On Sat, 2016-01-16 at 17:11 +0200, Priit Laes wrote: > On Thu, 2016-01-14 at 16:24 +0100, Maxime Ripard wrote: > > The Allwinner A10 and subsequent SoCs share the same display > > pipeline, with > > variations in the number of controllers (1 or 2), or the presence > >

Re: [linux-sunxi] [PATCH v2 16/26] drm: Add Allwinner A10 Display Engine support

2016-01-16 Thread Priit Laes
2 of > + * the License, or (at your option) any later version. > + */ > + > +#include > +#include > +#include > + > +#include "sun4i_drv.h" > + > +static void sun4i_de_output_poll_changed(struct drm_device *drm) > +{ > + struct sun4i_drv *drv = drm->dev_pri

Re: [linux-sunxi] Touchscreen from CHUWI Vi10: ATMEL_MXT_TS and Ft5x0x_ts = what is this and how to?

2016-02-10 Thread Priit Laes
On Wed, 2016-02-10 at 18:41 -0800, sergk.ad...@gmail.com wrote: > Hiya All! > > New tablet ;-) old problems. Please go through http://linux-sunxi.org/New_Device_howto > Goal - to tun Linux on Chuwi Vi10 rev 11: Current problem: Make it > working touchscreen! > There are Android with i2c-tools

Re: [linux-sunxi] Re: GSL3680 thread

2016-01-23 Thread Priit Laes
ree/master/customer/d rivers/touchscreen > > So, for them moment, it's a dead end :( > > Bye > > Laurent > > Le samedi 23 janvier 2016 09:41:51 UTC+1, Priit Laes a écrit : > > On Fri, 2016-01-22 at 12:45 -0800, 'destroyedlolo' via linux-sunxi  > > wrote:  >

Re: [linux-sunxi] Re: GSL3680 thread

2016-01-23 Thread Priit Laes
p://linux-sunxi.org/Touchscreen#Silead Also, what device do you have? Päikest, Priit Laes :) -- You received this message because you are subscribed to the Google Groups "linux-sunxi" group. To unsubscribe from this group and stop receiving emails from it, send an email to l

Re: [linux-sunxi] [PATCH v2 00/26] drm: Add Allwinner A10 display engine support

2016-02-20 Thread Priit Laes
On Thu, 2016-01-14 at 16:24 +0100, Maxime Ripard wrote: > Hi everyone, > > The Allwinner SoCs (except for the very latest ones) all share the > same set of controllers, loosely coupled together to form the display > pipeline. > > Depending on the SoC, the number of instances of the controller

Re: [linux-sunxi] Touchscreen from CHUWI Vi10: ATMEL_MXT_TS and Ft5x0x_ts = what is this and how to?

2016-02-11 Thread Priit Laes
be ported. > Regards,  >     Serge. > > > > On Thursday, February 11, 2016 at 5:53:03 AM UTC, Priit Laes wrote: > > On Wed, 2016-02-10 at 18:41 -0800, sergk...@gmail.com wrote:  > > > Hiya All!  > > >  > > > New tablet ;-) old probl

Re: [linux-sunxi] How to get IRQ number for a GPIO?

2016-03-12 Thread Priit Laes
On Sat, 2016-03-12 at 01:18 -0800, ION GROZEA wrote: > Hello all, > > I am trying to add the MPU9150 driver in to kernel 3.4.39 > > In the mach-sun71/core.c i have > > #define MPU_IRQ gpio_to_irq(176) - i need the IRQ for PH00 > > static struct i2c_board_info __initdata

Re: [linux-sunxi] how configure devicetree for w1-gpio on banana-pi-board

2016-04-06 Thread Priit Laes
On Wed, 2016-04-06 at 00:48 -0700, muell.sau...@gmail.com wrote: > i need add the config for an 1-Wwre bus on gpio, the 1-wire datapin > is connected to GPIO thrugh CON3/PIN7 (GPCLK / GPIO4) on the bpi. Now > i missing the correct valuse for the > "gpios = < ? ? ??" - device definition in the

Re: [linux-sunxi] [PATCH v4 13/13] ARM: sunxi: Add Kconfig for sunxi clocks

2016-03-19 Thread Priit Laes
On Thu, 2016-03-17 at 00:04 +0800, Vishnu Patekar wrote: > This patch adds Kconfig for sunxi clocks. > Currently, only sun8i-apb0 and sun9i-cpus clocks are added. > It'll help to use common clocks across different SOCs. > We can switch to kconfig for other clocks in future. > > Signed-off-by:

Re: [linux-sunxi] Re: [PATCH-RFC] ARM: sun4i: spi: Allow transfers larger than FIFO size

2016-03-27 Thread Priit Laes
On Sun, 2016-03-27 at 02:10 -0700, Iru Cai wrote: > Thanks for this patch, and I can use flashrom in Cubieboard with the > patch v6 and mainline kernel. > > However, there's still some problems. I flashed a chip off the board > and it works well, but when I read a chip on a mainboard twice, the >

  1   2   3   4   >