Re: [linux-sunxi] Re: [PATCH v4] ARM: sun8i: h2+: add support for Banana Pi M2 Zero board
On Thu, Feb 8, 2018 at 5:28 PM, Jernej Škrabecwrote: > Dne četrtek, 08. februar 2018 ob 10:15:35 CET je Icenowy Zheng napisal(a): >> 在 2018-02-08 17:00,Maxime Ripard 写道: >> >> > On Tue, Feb 06, 2018 at 09:16:47PM +0800, Icenowy Zheng wrote: >> >> Banana Pi M2 Zero board is a H2+-based board by Sinovoip, with a form >> >> factor and GPIO holes similar to Raspberry Pi Zero. >> >> >> >> It features: >> >> - Allwinner H2+ SoC >> >> - Single-chip (16-bit) 512MiB DDR3 DRAM >> >> - Ampak AP6212 Wi-Fi/Bluetooth module >> >> - MicroSD slot >> >> - Two MicroUSB Type-B ports (one can only be used to power the board >> >> and >> >> >> >> the other features OTG functionality) >> >> >> >> - Two keys, a reset and a GPIO-connected key. >> >> - HDMI Type-C (miniHDMI) connector connected to the HDMI part of H2+. >> >> - CSI connector to connect the camera sensor provided by Sinovoip. >> >> >> >> Signed-off-by: Icenowy Zheng >> >> --- >> >> Changes in v4: >> >> - Use SPDX license identifier. >> >> >> >> Changes in v3: >> >> - Add comments about Vbus problem in node. >> >> >> >> Changes in v2: >> >> - Use high active SD card detect on the production batch. >> >> >> >> arch/arm/boot/dts/Makefile | 1 + >> >> .../boot/dts/sun8i-h2-plus-bananapi-m2-zero.dts| 126 >> >> >> >> + >> >> >> >> 2 files changed, 127 insertions(+) >> >> create mode 100644 >> >> >> >> arch/arm/boot/dts/sun8i-h2-plus-bananapi-m2-zero.dts >> >> >> >> diff --git a/arch/arm/boot/dts/Makefile b/arch/arm/boot/dts/Makefile >> >> index ade7a38543dc..d5a17e6e8b0f 100644 >> >> --- a/arch/arm/boot/dts/Makefile >> >> +++ b/arch/arm/boot/dts/Makefile >> >> @@ -974,6 +974,7 @@ dtb-$(CONFIG_MACH_SUN8I) += \ >> >> >> >>sun8i-a83t-cubietruck-plus.dtb \ >> >>sun8i-a83t-tbs-a711.dtb \ >> >>sun8i-h2-plus-orangepi-r1.dtb \ >> >> >> >> + sun8i-h2-plus-bananapi-m2-zero.dtb \ >> >> >> >>sun8i-h2-plus-orangepi-zero.dtb \ >> >>sun8i-h3-bananapi-m2-plus.dtb \ >> >>sun8i-h3-beelink-x2.dtb \ >> >> >> >> diff --git a/arch/arm/boot/dts/sun8i-h2-plus-bananapi-m2-zero.dts >> >> b/arch/arm/boot/dts/sun8i-h2-plus-bananapi-m2-zero.dts >> >> new file mode 100644 >> >> index ..e2ee65a5bf92 >> >> --- /dev/null >> >> +++ b/arch/arm/boot/dts/sun8i-h2-plus-bananapi-m2-zero.dts >> >> @@ -0,0 +1,126 @@ >> >> +/* >> >> + * Copyright (C) 2017 Icenowy Zheng >> >> + * >> >> + * Based on sun8i-h3-bananapi-m2-plus.dts, which is: >> >> + * Copyright (C) 2016 Chen-Yu Tsai >> >> + * >> >> + * SPDX-License-Identifier: (GPL-2.0+ OR MIT) >> > >> > Sorry to be a bit picky about this, but this should be your very first >> > line, see arch/arm/boot/dts/sun7i-a20-olimex-som204-evb.dts for >> > example. >> >> I think it's also OK here, see >> arch/arm/boot/dts/sun8i-h3-libretech-all-h3-cc.dts. > > Lincesing rules [1] says it should be in first possible line which can contain > comment. > > [1] https://git.kernel.org/pub/scm/linux/kernel/git/next/linux-next.git/tree/ > Documentation/process/license-rules.rst#n57 I confess I only read the license line rule some time after I posted that patch. ChenYu >> >> > Thanks! >> > Maxime >> >> -- >> You received this message because you are subscribed to the Google Groups >> "linux-sunxi" group. To unsubscribe from this group and stop receiving >> emails from it, send an email to linux-sunxi+unsubscr...@googlegroups.com. >> For more options, visit https://groups.google.com/d/optout. > > > > -- You received this message because you are subscribed to the Google Groups "linux-sunxi" group. To unsubscribe from this group and stop receiving emails from it, send an email to linux-sunxi+unsubscr...@googlegroups.com. For more options, visit https://groups.google.com/d/optout.
Re: [linux-sunxi] Re: [PATCH v4] ARM: sun8i: h2+: add support for Banana Pi M2 Zero board
Dne četrtek, 08. februar 2018 ob 10:15:35 CET je Icenowy Zheng napisal(a): > 在 2018-02-08 17:00,Maxime Ripard 写道: > > > On Tue, Feb 06, 2018 at 09:16:47PM +0800, Icenowy Zheng wrote: > >> Banana Pi M2 Zero board is a H2+-based board by Sinovoip, with a form > >> factor and GPIO holes similar to Raspberry Pi Zero. > >> > >> It features: > >> - Allwinner H2+ SoC > >> - Single-chip (16-bit) 512MiB DDR3 DRAM > >> - Ampak AP6212 Wi-Fi/Bluetooth module > >> - MicroSD slot > >> - Two MicroUSB Type-B ports (one can only be used to power the board > >> and > >> > >> the other features OTG functionality) > >> > >> - Two keys, a reset and a GPIO-connected key. > >> - HDMI Type-C (miniHDMI) connector connected to the HDMI part of H2+. > >> - CSI connector to connect the camera sensor provided by Sinovoip. > >> > >> Signed-off-by: Icenowy Zheng> >> --- > >> Changes in v4: > >> - Use SPDX license identifier. > >> > >> Changes in v3: > >> - Add comments about Vbus problem in node. > >> > >> Changes in v2: > >> - Use high active SD card detect on the production batch. > >> > >> arch/arm/boot/dts/Makefile | 1 + > >> .../boot/dts/sun8i-h2-plus-bananapi-m2-zero.dts| 126 > >> > >> + > >> > >> 2 files changed, 127 insertions(+) > >> create mode 100644 > >> > >> arch/arm/boot/dts/sun8i-h2-plus-bananapi-m2-zero.dts > >> > >> diff --git a/arch/arm/boot/dts/Makefile b/arch/arm/boot/dts/Makefile > >> index ade7a38543dc..d5a17e6e8b0f 100644 > >> --- a/arch/arm/boot/dts/Makefile > >> +++ b/arch/arm/boot/dts/Makefile > >> @@ -974,6 +974,7 @@ dtb-$(CONFIG_MACH_SUN8I) += \ > >> > >>sun8i-a83t-cubietruck-plus.dtb \ > >>sun8i-a83t-tbs-a711.dtb \ > >>sun8i-h2-plus-orangepi-r1.dtb \ > >> > >> + sun8i-h2-plus-bananapi-m2-zero.dtb \ > >> > >>sun8i-h2-plus-orangepi-zero.dtb \ > >>sun8i-h3-bananapi-m2-plus.dtb \ > >>sun8i-h3-beelink-x2.dtb \ > >> > >> diff --git a/arch/arm/boot/dts/sun8i-h2-plus-bananapi-m2-zero.dts > >> b/arch/arm/boot/dts/sun8i-h2-plus-bananapi-m2-zero.dts > >> new file mode 100644 > >> index ..e2ee65a5bf92 > >> --- /dev/null > >> +++ b/arch/arm/boot/dts/sun8i-h2-plus-bananapi-m2-zero.dts > >> @@ -0,0 +1,126 @@ > >> +/* > >> + * Copyright (C) 2017 Icenowy Zheng > >> + * > >> + * Based on sun8i-h3-bananapi-m2-plus.dts, which is: > >> + * Copyright (C) 2016 Chen-Yu Tsai > >> + * > >> + * SPDX-License-Identifier: (GPL-2.0+ OR MIT) > > > > Sorry to be a bit picky about this, but this should be your very first > > line, see arch/arm/boot/dts/sun7i-a20-olimex-som204-evb.dts for > > example. > > I think it's also OK here, see > arch/arm/boot/dts/sun8i-h3-libretech-all-h3-cc.dts. Lincesing rules [1] says it should be in first possible line which can contain comment. [1] https://git.kernel.org/pub/scm/linux/kernel/git/next/linux-next.git/tree/ Documentation/process/license-rules.rst#n57 > > > Thanks! > > Maxime > > -- > You received this message because you are subscribed to the Google Groups > "linux-sunxi" group. To unsubscribe from this group and stop receiving > emails from it, send an email to linux-sunxi+unsubscr...@googlegroups.com. > For more options, visit https://groups.google.com/d/optout. -- You received this message because you are subscribed to the Google Groups "linux-sunxi" group. To unsubscribe from this group and stop receiving emails from it, send an email to linux-sunxi+unsubscr...@googlegroups.com. For more options, visit https://groups.google.com/d/optout.
[linux-sunxi] Re: [PATCH v4] ARM: sun8i: h2+: add support for Banana Pi M2 Zero board
在 2018-02-08 17:00,Maxime Ripard 写道: On Tue, Feb 06, 2018 at 09:16:47PM +0800, Icenowy Zheng wrote: Banana Pi M2 Zero board is a H2+-based board by Sinovoip, with a form factor and GPIO holes similar to Raspberry Pi Zero. It features: - Allwinner H2+ SoC - Single-chip (16-bit) 512MiB DDR3 DRAM - Ampak AP6212 Wi-Fi/Bluetooth module - MicroSD slot - Two MicroUSB Type-B ports (one can only be used to power the board and the other features OTG functionality) - Two keys, a reset and a GPIO-connected key. - HDMI Type-C (miniHDMI) connector connected to the HDMI part of H2+. - CSI connector to connect the camera sensor provided by Sinovoip. Signed-off-by: Icenowy Zheng--- Changes in v4: - Use SPDX license identifier. Changes in v3: - Add comments about Vbus problem in node. Changes in v2: - Use high active SD card detect on the production batch. arch/arm/boot/dts/Makefile | 1 + .../boot/dts/sun8i-h2-plus-bananapi-m2-zero.dts| 126 + 2 files changed, 127 insertions(+) create mode 100644 arch/arm/boot/dts/sun8i-h2-plus-bananapi-m2-zero.dts diff --git a/arch/arm/boot/dts/Makefile b/arch/arm/boot/dts/Makefile index ade7a38543dc..d5a17e6e8b0f 100644 --- a/arch/arm/boot/dts/Makefile +++ b/arch/arm/boot/dts/Makefile @@ -974,6 +974,7 @@ dtb-$(CONFIG_MACH_SUN8I) += \ sun8i-a83t-cubietruck-plus.dtb \ sun8i-a83t-tbs-a711.dtb \ sun8i-h2-plus-orangepi-r1.dtb \ + sun8i-h2-plus-bananapi-m2-zero.dtb \ sun8i-h2-plus-orangepi-zero.dtb \ sun8i-h3-bananapi-m2-plus.dtb \ sun8i-h3-beelink-x2.dtb \ diff --git a/arch/arm/boot/dts/sun8i-h2-plus-bananapi-m2-zero.dts b/arch/arm/boot/dts/sun8i-h2-plus-bananapi-m2-zero.dts new file mode 100644 index ..e2ee65a5bf92 --- /dev/null +++ b/arch/arm/boot/dts/sun8i-h2-plus-bananapi-m2-zero.dts @@ -0,0 +1,126 @@ +/* + * Copyright (C) 2017 Icenowy Zheng + * + * Based on sun8i-h3-bananapi-m2-plus.dts, which is: + * Copyright (C) 2016 Chen-Yu Tsai + * + * SPDX-License-Identifier: (GPL-2.0+ OR MIT) Sorry to be a bit picky about this, but this should be your very first line, see arch/arm/boot/dts/sun7i-a20-olimex-som204-evb.dts for example. I think it's also OK here, see arch/arm/boot/dts/sun8i-h3-libretech-all-h3-cc.dts. Thanks! Maxime -- You received this message because you are subscribed to the Google Groups "linux-sunxi" group. To unsubscribe from this group and stop receiving emails from it, send an email to linux-sunxi+unsubscr...@googlegroups.com. For more options, visit https://groups.google.com/d/optout.