On Thursday 01 Dec 2016 12:30:09 Jean-Francois Moine wrote:
> On Thu, 01 Dec 2016 12:41:20 +0200 Laurent Pinchart wrote:
> >>> If a DVI connector instead of a HDMI connector is soldered, how
> >>> should such a device tree be written?
> >>
> >> Use a dvi-connector instead :)
> >
> > The HDMI
On Thu, 01 Dec 2016 12:41:20 +0200
Laurent Pinchart wrote:
> > > If a DVI connector instead of a HDMI connector is soldered, how
> > > should such a device tree be written?
> >
> > Use a dvi-connector instead :)
>
> The HDMI encoder DT node doesn't (and
On Thursday 01 Dec 2016 09:55:20 Maxime Ripard wrote:
> On Thu, Dec 01, 2016 at 01:33:30AM +0800, Icenowy Zheng wrote:
> >>> hdmi-out {
> >>> compatible = "hdmi-connector";
> >>> type = "a";
> >>> /* I2C bus and GPIO references are made
On Thu, Dec 01, 2016 at 01:33:30AM +0800, Icenowy Zheng wrote:
> >> hdmi-out {
> >> compatible = "hdmi-connector";
> >> type = "a";
> >> /* I2C bus and GPIO references are made up for the
> >> example */
> >> ddc-i2c-bus
30.11.2016, 17:28, "Jean-Francois Moine" :
> On Wed, 30 Nov 2016 10:20:21 +0200
> Laurent Pinchart wrote:
>
>> > Well, I don't see what this connector can be.
>> > May you give me a DT example?
>>
>> Sure.
>>
>>
On Wed, 30 Nov 2016 11:52:25 +0200
Laurent Pinchart wrote:
> Hi Jean-François,
>
> On Wednesday 30 Nov 2016 10:27:57 Jean-Francois Moine wrote:
> > On Wed, 30 Nov 2016 10:20:21 +0200 Laurent Pinchart wrote:
> > >> Well, I don't see what this connector can be.
Hi Jean-François,
On Wednesday 30 Nov 2016 10:27:57 Jean-Francois Moine wrote:
> On Wed, 30 Nov 2016 10:20:21 +0200 Laurent Pinchart wrote:
> >> Well, I don't see what this connector can be.
> >> May you give me a DT example?
> >
> > Sure.
> >
> > arch/arm/boot/dts/r8a7791-koelsch.dts
> >
> >
On Wed, 30 Nov 2016 10:20:21 +0200
Laurent Pinchart wrote:
> > Well, I don't see what this connector can be.
> > May you give me a DT example?
>
> Sure.
>
> arch/arm/boot/dts/r8a7791-koelsch.dts
>
> /* HDMI encoder */
>
> hdmi@39 {
>
Hi Jean-François,
On Wednesday 30 Nov 2016 09:12:08 Jean-Francois Moine wrote:
> On Tue, 29 Nov 2016 22:10:01 +0200 Laurent Pinchart wrote:
> > On Tuesday 29 Nov 2016 21:04:55 Jean-Francois Moine wrote:
> >> On Tue, 29 Nov 2016 21:33 +0200 Laurent Pinchart wrote:
> > You need a third port for
On Tue, 29 Nov 2016 22:10:01 +0200
Laurent Pinchart wrote:
> Hi Jean-François,
>
> On Tuesday 29 Nov 2016 21:04:55 Jean-Francois Moine wrote:
> > On Tue, 29 Nov 2016 21:33 +0200 Laurent Pinchart wrote:
> > >>> You need a third port for the HDMI encoder output,
Hi Jean-François,
On Tuesday 29 Nov 2016 21:04:55 Jean-Francois Moine wrote:
> On Tue, 29 Nov 2016 21:33 +0200 Laurent Pinchart wrote:
> >>> You need a third port for the HDMI encoder output, connected to an
> >>> HDMI connector DT node.
> >>
> >> I don't see what you mean. The HDMI device is
On Tue, 29 Nov 2016 21:33 +0200
Laurent Pinchart wrote:
> > > You need a third port for the HDMI encoder output, connected to an HDMI
> > > connector DT node.
> >
> > I don't see what you mean. The HDMI device is both the encoder
> > and connector (as the
Hi Jean-François,
On Tuesday 29 Nov 2016 20:27:51 Jean-Francois Moine wrote:
> On Tue, 29 Nov 2016 20:46:22 +0200 Laurent Pinchart wrote:
> [snip]
>
> >> +Example:
> >> +
> >> + hdmi: hdmi@01ee {
> >> + compatible = "allwinner,sun8i-a83t-hdmi";
> >> + reg = <0x01ee
On Tue, 29 Nov 2016 20:46:22 +0200
Laurent Pinchart wrote:
[snip]
> > +Example:
> > +
> > + hdmi: hdmi@01ee {
> > + compatible = "allwinner,sun8i-a83t-hdmi";
> > + reg = <0x01ee 0x2>;
> > + clocks = <
Hi Jean-François,
Thank you for the patch.
On Tuesday 29 Nov 2016 10:08:25 Jean-Francois Moine wrote:
> Signed-off-by: Jean-Francois Moine
> ---
> .../devicetree/bindings/display/sunxi/hdmi.txt | 56 +++
> 1 file changed, 56 insertions(+)
> create mode
15 matches
Mail list logo