I can certainly provide the dwc3 specific kernel bootup logs, full
regdump and any loglevel you want me to, if that helps
Yeah, if you can provide those, then that'll help me verifying. Full
logs from boot to failure point with VERBOSE_DEBUG enabled (considering
you're not running on anything
Hi,
On Mon, Dec 22, 2014 at 9:42 PM, Felipe Balbi ba...@ti.com wrote:
Hi again,
On Mon, Dec 22, 2014 at 10:11:23AM -0600, Felipe Balbi wrote:
(please don't top-post)
Sure.
On Sun, Dec 14, 2014 at 08:39:18AM +0530, sundeep subbaraya wrote:
Hi Paul,
As per my understanding, for BULK
This device incorrectly reports its bInterfaceClass as 255, when it
should really be 1 (USB_CLASS_AUDIO).
Signed-off-by: Paul Bonser mister...@gmail.com
---
diff --git a/sound/usb/quirks-table.h b/sound/usb/quirks-table.h
index 8590a32..42ccd76 100644
--- a/sound/usb/quirks-table.h
+++
This reverts commit 62f4f0651ce8ef966a0e5b6db6a7a524c268fdd2.
This patch is incomplete solution. It won't work without changes in udc-core,
which were considered as unacceptable (discussion [1]).
[1] https://lkml.org/lkml/2014/12/12/360
Signed-off-by: Robert Baldyga r.bald...@samsung.com
---
On Mon, Jan 5, 2015 at 6:55 PM, Linus Walleij linus.wall...@linaro.org wrote:
On Wed, Dec 31, 2014 at 9:55 PM, Linus Walleij linus.wall...@linaro.org
wrote:
On Thu, Dec 11, 2014 at 2:02 PM, Octavian Purdila
octavian.purd...@intel.com wrote:
As noticed during suspend/resume operations,
Some controllers need to have external power supplied before toggling
the internal PORT_POWER bit.
Fixes: 11a7e5940514 (usb: ehci: add ehci_port_power interface) on i.MX51
where the controller would hang the machine when trying to enable PORT_POWER.
Signed-off-by: Lucas Stach
On Wed, Dec 31, 2014 at 9:55 PM, Linus Walleij linus.wall...@linaro.org wrote:
On Thu, Dec 11, 2014 at 2:02 PM, Octavian Purdila
octavian.purd...@intel.com wrote:
As noticed during suspend/resume operations, the IRQ can be unmasked
then disabled in suspend and eventually enabled in resume,
Hi Shimoda-san,
On Wed, Dec 24, 2014 at 11:02 AM, yoshihiro shimoda
yoshihiro.shimoda...@renesas.com wrote:
Er, OK. Could you update MAINTAINERS?
there is no entry for renesas driver in MAINTAINERS.
Shimoda-san, care to send a patch adding yourself or Morimoto-san as
maintainers for
Hi Lucas,
On Mon, Jan 5, 2015 at 9:02 AM, Lucas Stach l.st...@pengutronix.de wrote:
Some controllers need to have external power supplied before toggling
the internal PORT_POWER bit.
Fixes: 11a7e5940514 (usb: ehci: add ehci_port_power interface) on i.MX51
where the controller would hang the
On 24 December 2014 at 11:16, Vince Hsu vin...@nvidia.com wrote:
The commit 1290a958d48e (usb: phy: propagate __of_usb_find_phy()'s error on
failure) changed the condition to return -EPROBE_DEFER to host driver.
Originally the Tegra host driver depended on the returned -EPROBE_DEFER to
get the
On Mon, Jan 5, 2015 at 9:02 AM, Lucas Stach l.st...@pengutronix.de wrote:
Some controllers need to have external power supplied before toggling
the internal PORT_POWER bit.
Fixes: 11a7e5940514 (usb: ehci: add ehci_port_power interface) on i.MX51
where the controller would hang the machine
hi all:
after tracing and reading kernel usb source code about run time and
normal suspend.
1. how could we check the rum time suspend is work on some device?
By plugging in devices and check whether
/sys/bus/usb/devices/.../power/ is empty or not?
2. I plug in one mouse and found the device
Am Montag, den 05.01.2015, 10:12 -0200 schrieb Fabio Estevam:
Hi Lucas,
On Mon, Jan 5, 2015 at 9:02 AM, Lucas Stach l.st...@pengutronix.de wrote:
Some controllers need to have external power supplied before toggling
the internal PORT_POWER bit.
Fixes: 11a7e5940514 (usb: ehci: add
On Mon, Jan 5, 2015 at 11:06 AM, Lucas Stach l.st...@pengutronix.de wrote:
Am Montag, den 05.01.2015, 10:12 -0200 schrieb Fabio Estevam:
Hi Lucas,
On Mon, Jan 5, 2015 at 9:02 AM, Lucas Stach l.st...@pengutronix.de wrote:
Some controllers need to have external power supplied before toggling
While accessing a unusual usb storage (ums-alauda, ums-cypress, ...),
the module reference count is not incremented. Because these drivers
allocate scsi hosts with usb_stor_host_template defined in usb-storage
module. So these drivers always can be unloaded.
This fixes it by adjusting module
While accessing a scsi_device, the use count of the underlying LLDD module
is incremented. The module reference is retrieved through .module field of
struct scsi_host_template.
This mapping between scsi_device and underlying LLDD module works well
except some scsi drivers (ufs and unusual usb
The USB console currently allocates a temporary fake tty which is used
to pass terminal settings to the underlying serial driver.
The tty struct is not fully initialised, something which can lead to a
lockdep warning (or worse) if a serial driver tries to acquire a
line-discipline reference:
Use tty kref to release the fake tty in usb_console_setup to avoid use
after free if the underlying serial driver has acquired a reference.
Note that using the tty destructor release_one_tty requires some more
state to be initialised.
Fixes: 4a90f09b20f4 (tty: usb-serial krefs)
Cc: stable
On Mon, 15 Dec 2014, Michael Tessier wrote:
Hi,
I am dealing with a USB EHCI driver bug. Here is the info:
My configuration:
-
Host: Freescale i.MX512 with ARM Cortex A8 (USB 2.0 host controller)
Linux kernel: 2.6.31, using EHCI USB driver
As mentioned by
Hi,
would you like to trouble-shoot the kernel USB3/xhci code?
I had a lot of struggle with the following set up:
- Netgear ReadyNAS rn104 (ARMv7) running plain debian
- Fresco Logic FL1009 USB3 controller
- selfbuilt kernel.org kernel 3.18.1
- Technisat SkyStar USB HD (DVB-S/S2) - USB 2.0
Hi,
On Sun, Jan 04, 2015 at 08:55:01PM +0800, Sneeker Yeh wrote:
So far Fujitsu Semiconductor got Synopsys internal case id , that is
Case: 8000679552.
However the contents belongs this id cannot be referred except Fujitsu
Semiconductor and Synopsys.
Synopsis decide the official
On Tue, Dec 30, 2014 at 11:19:07AM -0500, Douglas Gilbert wrote:
In SCSI, the VPD page 0xb0 (Block limits) has a Maximum transfer
length field (32 bits long). Its units are logical blocks. Useful
if 0 as 0 means unreported.
USB to SATA bridges should comply with SAT. However SAT and SAT-2
On Tue, Dec 30, 2014 at 08:36:34AM -0800, Kenneth R. Crudup wrote:
OP here. FWIW, this is what I get when running that command on the SCSI
generic device that corresponds to the USB-3 (non-UAS) disk[1] that had the
issue:
So it looks like this one actually provides sane values, but we don't
we
On Mon, Jan 5, 2015 at 1:12 PM, Michael Tessier
michael.tess...@axiontech.ca wrote:
If sound is ok when using only 1 codec and becomes choppy when adding a
second codec, then it means that this issue is still in the 3.x kernel. This
answer will tell me if it is worth working on using a newer
2015-01-05 23:40 GMT+08:00 Alan Stern st...@rowland.harvard.edu:
On Mon, 5 Jan 2015, vichy wrote:
hi all:
after tracing and reading kernel usb source code about run time and
normal suspend.
1. how could we check the rum time suspend is work on some device?
By plugging in devices and
Hi Paul,
I think you need this patch to fix the problem:
usb: dwc2: resume root hub when device detect with suspend state
https://patchwork.kernel.org/patch/5325111/
Thanks,
- Kever
On 01/06/2015 09:23 AM, Paul Zimmerman wrote:
From: Kever Yang [mailto:kever.y...@rock-chips.com]
Sent:
Some parameters are not used by functions in xhci-mem.c, just
remove it.
Signed-off-by: Lin Wang lin.x.w...@intel.com
---
drivers/usb/host/xhci-dbg.c |2 +-
drivers/usb/host/xhci-mem.c | 21 +
drivers/usb/host/xhci-ring.c |6 +++---
drivers/usb/host/xhci.c |
On Mon, Jan 05, 2015 at 05:13:48PM +0100, JPT wrote:
Hi,
would you like to trouble-shoot the kernel USB3/xhci code?
I had a lot of struggle with the following set up:
- Netgear ReadyNAS rn104 (ARMv7) running plain debian
- Fresco Logic FL1009 USB3 controller
- selfbuilt kernel.org kernel
Parameter 'xhci' is no longer be used in function xhci_handshake(),
just remove it.
Signed-off-by: Lin Wang lin.x.w...@intel.com
---
drivers/usb/host/xhci-ring.c |2 +-
drivers/usb/host/xhci.c | 19 +--
drivers/usb/host/xhci.h |3 +--
3 files changed, 11
2015-01-06 0:27 GMT+09:00 Alan Stern st...@rowland.harvard.edu:
On Mon, 5 Jan 2015, Akinobu Mita wrote:
While accessing a unusual usb storage (ums-alauda, ums-cypress, ...),
the module reference count is not incremented. Because these drivers
allocate scsi hosts with usb_stor_host_template
From: Kever Yang [mailto:kever.y...@rock-chips.com]
Sent: Wednesday, November 12, 2014 4:42 PM
On 11/13/2014 07:22 AM, Doug Anderson wrote:
Kever,
On Mon, Nov 10, 2014 at 5:09 AM, Kever Yang kever.y...@rock-chips.com
wrote:
Hcd controller needs bus_suspend/resume, dwc2 controller
This patch removes unused variable out_ctx and avoid multiple calls
to function xhci_get_endpoint_flag().
Signed-off-by: Lin Wang lin.x.w...@intel.com
---
drivers/usb/host/xhci.c |9 +++--
1 file changed, 3 insertions(+), 6 deletions(-)
diff --git a/drivers/usb/host/xhci.c
From: Kever Yang [mailto:kever.y...@rock-chips.com]
Sent: Monday, January 05, 2015 5:42 PM
Hi Paul,
I think you need this patch to fix the problem:
usb: dwc2: resume root hub when device detect with suspend state
https://patchwork.kernel.org/patch/5325111/
Thanks,
- Kever
On
On Mon, 5 Jan 2015, Paul Zimmerman wrote:
Adding Dinh to CC.
Robert, Dinh, I would like to have your tested-bys for this series, please.
I'll try to test this by the end of this week.
Dinh
From: Mian Yousaf Kaukab [mailto:yousaf.kau...@intel.com]
Sent: Friday, January 02, 2015 6:42
On Mon, 5 Jan 2015, Christoph Hellwig wrote:
On Tue, Dec 30, 2014 at 08:36:34AM -0800, Kenneth R. Crudup wrote:
OP here. FWIW, this is what I get when running that command on the SCSI
generic device that corresponds to the USB-3 (non-UAS) disk[1] that had the
issue:
So it looks like
I will later tonight. For now, I'm using 3.18.x (for another reason), which
doesn't have this commit.
My Linus-latest tree has a fix that imposed a hard limit of 32767, which
worked for me then.
On January 5, 2015 12:07:56 PM PST, Alan Stern st...@rowland.harvard.edu
wrote:
On Mon, 5 Jan
Adding Dinh to CC.
Robert, Dinh, I would like to have your tested-bys for this series, please.
--
Paul
From: Mian Yousaf Kaukab [mailto:yousaf.kau...@intel.com]
Sent: Friday, January 02, 2015 6:42 AM
Hi,
This patchset consists of various bug fixes and feature enhancements for the
dwc2
On 12/23/2014 11:36 AM, Felipe Balbi wrote:
On Thu, Dec 04, 2014 at 01:06:07PM +0100, Thierry Reding wrote:
From: Thierry Reding tred...@nvidia.com
Commit 1290a958d48e (usb: phy: propagate __of_usb_find_phy()'s error on
failure) broke platforms that rely on deferred probing to order probing
of
From: Marek Szyprowski [mailto:m.szyprow...@samsung.com]
Sent: Wednesday, December 17, 2014 5:50 AM
DWC2 module on Exynos SoCs is used only as peripheral controller (UDC),
so add support for selecting default initial state for dual-role mode. The
default init mode can be overridden by
From: Robert Baldyga [mailto:r.bald...@samsung.com]
Sent: Tuesday, December 16, 2014 2:52 AM
This patch fixes in simpler way the bug described in [1] and [2]. It
looks like DWC2 is the only UDC driver that doesn't force usb requests
to complete in ep_disable() function. This causes
Hi,
On Mon, Jan 05, 2015 at 04:28:34PM +0100, Arnd Bergmann wrote:
On Friday 02 January 2015 19:21:28 Felipe Balbi wrote:
On Tue, Dec 30, 2014 at 11:12:51AM +0100, Arnd Bergmann wrote:
On Monday 29 December 2014 01:52:04 Sneeker Yeh wrote:
+static int
On Mon, 5 Jan 2015, Lucas Stach wrote:
Some controllers need to have external power supplied before toggling
the internal PORT_POWER bit.
Fixes: 11a7e5940514 (usb: ehci: add ehci_port_power interface) on i.MX51
where the controller would hang the machine when trying to enable PORT_POWER.
On Mon, 5 Jan 2015, vichy wrote:
hi all:
after tracing and reading kernel usb source code about run time and
normal suspend.
1. how could we check the rum time suspend is work on some device?
By plugging in devices and check whether
/sys/bus/usb/devices/.../power/ is empty or not?
No.
On 01/03/2015 11:26 AM, Johan Hovold wrote:
On Wed, Dec 31, 2014 at 09:07:59PM -0500, Peter Hurley wrote:
Hi Johan,
On 11/18/2014 11:18 AM, Johan Hovold wrote:
I get this missing-lockdep-annotation warning which I haven't seen
before when booting with a usb-serial console on 3.18-rc5. It's
On Mon, 5 Jan 2015, Akinobu Mita wrote:
While accessing a unusual usb storage (ums-alauda, ums-cypress, ...),
the module reference count is not incremented. Because these drivers
allocate scsi hosts with usb_stor_host_template defined in usb-storage
module. So these drivers always can be
On Friday 02 January 2015 19:21:28 Felipe Balbi wrote:
On Tue, Dec 30, 2014 at 11:12:51AM +0100, Arnd Bergmann wrote:
On Monday 29 December 2014 01:52:04 Sneeker Yeh wrote:
+static int dwc3_mb86s70_remove_child(struct device *dev, void
*unused)
+{
+ struct
Hi,
On Sun, Jan 04, 2015 at 09:16:01PM +0800, Sneeker Yeh wrote:
Then dwc3 core won't be always created via sub node in platform glue
node,
and vendors like us can just drop platform glue which don't have any
specific platform code to wrap dwc3 core, and just directly use dwc3 core
On Mon, 5 Jan 2015, Michael Tessier wrote:
Hi,
I am dealing with a USB EHCI driver bug. Here is the info:
My configuration:
-
Host: Freescale i.MX512 with ARM Cortex A8 (USB 2.0 host controller)
Linux kernel: 2.6.31, using EHCI USB driver
As
Johan Hovold jo...@kernel.org wrote:
On Sat, Dec 27, 2014 at 10:54:09PM +0100, Reinhard Speyerer wrote:
Reinhard Speyerer rs...@arcor.de wrote:
Johan Hovold jo...@kernel.org wrote:
On Sun, Dec 21, 2014 at 11:25:45PM +0100, Reinhard Speyerer wrote:
With the qcserial.c patch below (for
49 matches
Mail list logo
