On Thu, Jul 23, 2015 at 01:39:06PM +0300, Sergei Shtylyov wrote:
Hello.
On 7/22/2015 9:56 PM, Peter E. Berger wrote:
@@ -928,6 +928,41 @@ static int ti_cpu_rev(struct edge_ti_manuf_descriptor
*desc)
return TI_GET_CPU_REVISION(desc-CpuRev_BoardRev);
}
+static int
On Thu, Jul 30, 2015 at 09:46:58AM +0800, Li Jun wrote:
On Wed, Jul 29, 2015 at 09:11:41PM -0500, Felipe Balbi wrote:
On Thu, Jul 30, 2015 at 07:24:03AM +0800, Li Jun wrote:
On Wed, Jul 29, 2015 at 10:04:27AM -0500, Felipe Balbi wrote:
On Mon, Jul 27, 2015 at 03:21:59PM +0800, Peter Chen
Hi Daniel,
btusb currently has a generic match on USB device descriptors:
{ USB_DEVICE_INFO(0xe0, 0x01, 0x01) },
However, http://www.usb.org/developers/defined_class states:
Base Class E0h (Wireless Controller)
This base class is defined for devices that are Wireless
From: Saurabh Karajgaonkar skara...@visteon.com
This patch is created using simple_return.cocci coccinelle script.
It replaces the redundant instances where variables are assigned
return value from functions and then used in return statements.
Signed-off-by: Saurabh Karajgaonkar
On Wed, Jul 22, 2015 at 01:56:14PM -0500, Peter E. Berger wrote:
From: Peter E. Berger pber...@brimson.com
The io_ti driver fails to download firmware to Edgeport
devices such as the EP/416, even when the on-disk firmware image
(/lib/firmware/edgeport/down3.bin) is more current than the
On Wed, Jul 22, 2015 at 01:56:16PM -0500, Peter E. Berger wrote:
+static inline void edge_heartbeat_schedule(struct edgeport_serial
*edge_serial)
+{
+ u16 product_id = le16_to_cpu(
+ edge_serial-serial-dev-descriptor.idProduct);
+
+ /* Currently only the
On Wed, Jul 22 2015, Sanjay Singh Rawat wrote:
After the worker thread is launched, bind function is doing further
configuration. In case of failure stop the thread.
Signed-off-by: Sanjay Singh Rawat snjs...@gmail.com
Sorry for the delay.
Acked-by: Michal Nazarewicz min...@mina86.com
---
Inquiry
Dear we are ATLANTIC TRADING DISTRIBUTING CO.LTD based in
Qatar,We are in need of your products, Urgently
please send to us your complete catalog / website ?in our email
address(khaledgr...@yahoo.com
Best regards,
Mr,khaled grupo
Purchase Manager
--
To unsubscribe from this list: send
Hi Greg,
Here's a fix and some device ids for v4.2-rc5. All have been in
linux-next.
Thanks,
Johan
The following changes since commit 52721d9d3334c1cb1f76219a161084094ec634dc:
Linux 4.2-rc3 (2015-07-19 14:45:02 -0700)
are available in the git repository at:
On Thu, 2015-07-30 at 15:44 +0200, Johan Hovold wrote:
On Wed, Jul 22, 2015 at 01:56:14PM -0500, Peter E. Berger wrote:
From: Peter E. Berger pber...@brimson.com
The io_ti driver fails to download firmware to Edgeport
devices such as the EP/416, even when the on-disk firmware image
On Thu, Jul 30, 2015 at 10:28:05AM -0500, Peter Berger wrote:
On Thu, 2015-07-30 at 15:44 +0200, Johan Hovold wrote:
On Wed, Jul 22, 2015 at 01:56:14PM -0500, Peter E. Berger wrote:
From: Peter E. Berger pber...@brimson.com
@@ -943,6 +944,17 @@ static int download_fw(struct
On Tue, Jul 28, 2015 at 06:55:57PM +0800, hu.bin...@zte.com.cn wrote:
Dear Johan:
Thank you for your reply me so quickly.
As you say, I have done the following test and verify:
1.I have run scripts/checkpatch.pl on my patch,and test result is OK.
2. I have installed this
Inquiry
Dear we are ATLANTIC TRADING DISTRIBUTING CO.LTD based in
Qatar,We are in need of your products, Urgently
please send to us your complete catalog / website ?in our email
address(khaledgr...@yahoo.com
Best regards,
Mr,khaled grupo
Purchase Manager
--
To unsubscribe from this list: send
From: Hayes Wang hayesw...@realtek.com
Date: Wed, 29 Jul 2015 20:39:07 +0800
v3:
For patch #2, remove cancel_delayed_work().
v2:
For patch #1, remove usb_autopm_get_interface(), usb_autopm_put_interface(),
and
the checking of intf-condition.
For patch #2, replace the original method
On 31/07/2015 00:12, Giulio Bernardi wrote:
On 30/07/2015 23:42, Giulio Bernardi wrote:
On 27/07/2015 16:28, Alan Stern wrote:
On Mon, 27 Jul 2015, Giulio Bernardi wrote:
Sorry for the late reply, but it took me a little bit to recompile the kernel
(my laptop is slow) and I was not able to
On 27/07/2015 16:28, Alan Stern wrote:
On Mon, 27 Jul 2015, Giulio Bernardi wrote:
Sorry for the late reply, but it took me a little bit to recompile the kernel
(my laptop is slow) and I was not able to obtain any meaningful results (please
note I know nothing about kernel internals).
Since some chipidea based controller is not otg capable, add ci-is_otg
condition when setting is_otg flag for gadget.
Signed-off-by: Li Jun jun...@freescale.com
Reviewed-by: Roger Quadros rog...@ti.com
Acked-by: Peter Chen peter.c...@freescale.com
---
drivers/usb/chipidea/udc.c | 4 ++--
1 file
The UEFI driver would enable zero length, and the Linux driver doesn't
need it. Zero length let the hw complete the transfer with length 0,
when there is no received packet. It would add the load of USB host
controller and reduce the performance.
Signed-off-by: Hayes Wang hayesw...@realtek.com
On Fri, Jul 31, 2015 at 03:49:02AM +0200, schorsch wrote:
https://bugzilla.kernel.org/show_bug.cgi?id=89471#c2
Please send the full information here so that we don't have to try to
track down some random web link...
--
To unsubscribe from this list: send the line unsubscribe linux-usb in
the
Sure, I'll do that. Just wanted to know whether I should split the patches and
send them in this same mail thread (may be something like [PATCH 01/04 V2])
or should I start new threads and send them separately to the respective
maintainers.
Thanks and Regards,
Saurabh Karajgaonkar
On Thu, Jul
Fixed the issue in displaying lengthy string descriptor (more than 128 bytes)
Signed-off-by: Muthu M muthu@gmail.com
---
usbmisc.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/usbmisc.c b/usbmisc.c
index f3577ea..71a702c 100644
--- a/usbmisc.c
+++ b/usbmisc.c
@@ -229,7
On Sun, Jul 26, 2015 at 11:14:34AM +0200, Michał Pecio wrote:
This commit fixes the following issues:
1. The 9th bit of buf was believed to be the LSB of divisor's
exponent, but the hardware interprets it as MSB (9th bit) of the
mantissa. The exponent is actually one bit shorter and
On Thu, Jul 30, 2015 at 04:46:12PM +0200, Johan Hovold wrote:
Hi Greg,
Here's a fix and some device ids for v4.2-rc5. All have been in
linux-next.
Thanks,
Johan
The following changes since commit 52721d9d3334c1cb1f76219a161084094ec634dc:
Linux 4.2-rc3 (2015-07-19 14:45:02 -0700)
Hi,
On Thu, Jul 23, 2015 at 07:57:49PM +0200, Krzysztof Opasiak wrote:
This patch replace dynamicly allocated luns array with static one.
This simplifies the code of mass storage function and modules.
Signed-off-by: Krzysztof Opasiak k.opas...@samsung.com
Acked-by: Michal Nazarewicz
Hello Dmitry,
Thanks a lot for your feedback.
On 07/30/2015 06:37 PM, Dmitry Torokhov wrote:
On Thu, Jul 30, 2015 at 09:35:17AM -0700, Dmitry Torokhov wrote:
Hi Javier,
On Thu, Jul 30, 2015 at 06:18:25PM +0200, Javier Martinez Canillas wrote:
Hello,
Short version:
This series add the
The kernel supports the device authorization because of wireless USB.
These is usable for wired USB devices, too.
These new interface authorization allows to enable or disable
individual interfaces instead a whole device.
If a deauthorized interface will be authorized so the driver probing must
This introduces an attribute for each interface to
authorize (1) or deauthorize (0) it:
/sys/bus/usb/devices/INTERFACE/authorized
Signed-off-by: Stefan Koch sk...@suse.de
---
drivers/usb/core/sysfs.c | 36
1 file changed, 36 insertions(+)
diff --git
Interfaces are allowed per default.
This can disabled or enabled (again) by writing 0 or 1 to
/sys/bus/usb/devices/usbX/interface_authorized_default
Signed-off-by: Stefan Koch sk...@suse.de
---
drivers/usb/core/hcd.c | 47 ++
Driver probings and interface claims get rejected
if an interface is not authorized.
Signed-off-by: Stefan Koch sk...@suse.de
---
drivers/usb/core/driver.c | 8
1 file changed, 8 insertions(+)
diff --git a/drivers/usb/core/driver.c b/drivers/usb/core/driver.c
index 818369a..d542d43
On Wed, 2015-07-29 at 12:10 -0700, Tim Bird wrote:
On Tue, Jun 2, 2015 at 6:14 AM, Ivan T. Ivanov iva...@linaro.org wrote:
On recent Qualcomm platforms VBUS and ID lines are not routed to
USB PHY LINK controller. Use extcon framework to receive connect
and disconnect ID and VBUS
On 07/29/2015 05:20 PM, Felipe Balbi wrote:
On Mon, Jul 27, 2015 at 11:16:14AM +0200, Robert Baldyga wrote:
Convert endpoint configuration to new capabilities model.
Fixed typo in epc-nulk to epc-bulk.
Signed-off-by: Robert Baldyga r.bald...@samsung.com
---
This part adds the documentation for the interface authorization.
Signed-off-by: Stefan Koch sk...@suse.de
---
Documentation/ABI/testing/sysfs-bus-usb | 22 +
Documentation/usb/authorization.txt | 34 +
2 files changed, 56 insertions(+)
The attribute authorized shows the authorization state for an interface.
Signed-off-by: Stefan Koch sk...@suse.de
---
include/linux/usb.h | 1 +
1 file changed, 1 insertion(+)
diff --git a/include/linux/usb.h b/include/linux/usb.h
index 447fe29..3deccab 100644
--- a/include/linux/usb.h
+++
With this patch a flag instead of a variable
is used for the default device authorization.
Signed-off-by: Stefan Koch sk...@suse.de
---
drivers/usb/core/hcd.c | 31 +--
drivers/usb/core/usb.c | 2 +-
include/linux/usb/hcd.h | 6 --
3 files changed, 26
This patch introduces an interface authorization for USB devices.
The kernel supports a device authorization because of wireless USB.
But the new interface authorization allows to authorize or deauthorize
individual interfaces instead authorization or deauthorize a whole device.
Therefore the
According to USB Audio Device 2.0 Spec, Ch4.10.1.1:
wMaxPacketSize is defined as follows:
Maximum packet size this endpoint is capable of sending or receiving
when this configuration is selected.
This is determined by the audio bandwidth constraints of the endpoint.
In current code, the
Hi Laura,
On Wed, Jul 29, 2015 at 02:27:23PM -0700, Laura Abbott wrote:
@@ -791,6 +796,9 @@ static int xpad_play_effect(struct input_dev *dev, void
*data, struct ff_effect
{
struct usb_xpad *xpad = input_get_drvdata(dev);
+ if (test_and_set_bit(OUT_IRQ_SUBMITTED,
Hello,
Short version:
This series add the missing MODULE_DEVICE_TABLE() for OF and I2C tables
to export that information so modules have the correct aliases built-in
and autoloading works correctly.
Longer version:
Currently it's mandatory for I2C drivers to have an I2C device ID table
An I2C driver that supports both OF and legacy platforms, will have
both a OF and I2C ID table. This means that when built as a module,
the aliases will be filled from both tables but currently always an
alias of the form i2c:deviceId is reported, e.g:
$ cat
On Thu, Jul 30, 2015 at 09:35:17AM -0700, Dmitry Torokhov wrote:
Hi Javier,
On Thu, Jul 30, 2015 at 06:18:25PM +0200, Javier Martinez Canillas wrote:
Hello,
Short version:
This series add the missing MODULE_DEVICE_TABLE() for OF and I2C tables
to export that information so
On Fri, Jul 24, 2015 at 08:48:09AM +0200, Petr Tesarik wrote:
From: Petr Tesarik ptesa...@suse.cz
There is a lot of overlap between the two functions (e.g. calculation
of the buffer size), so this removes a bit of code duplication, but
most importantly, a more generic function can be easily
The I2C core always reports the MODALIAS uevent as i2c:client name
regardless if the driver was matched using the I2C id_table or the
of_match_table. So the driver needs to export the I2C table and this
be built into the module or udev won't have the necessary information
to auto load the correct
On Thu, Jul 30, 2015 at 01:13:42PM +, Karajgaonkar, Saurabh (S.) wrote:
From: Saurabh Karajgaonkar skara...@visteon.com
This patch is created using simple_return.cocci coccinelle script.
It replaces the redundant instances where variables are assigned
return value from functions and then
Hi Javier,
On Thu, Jul 30, 2015 at 06:18:25PM +0200, Javier Martinez Canillas wrote:
Hello,
Short version:
This series add the missing MODULE_DEVICE_TABLE() for OF and I2C tables
to export that information so modules have the correct aliases built-in
and autoloading works correctly.
On 30/07/2015 23:42, Giulio Bernardi wrote:
On 27/07/2015 16:28, Alan Stern wrote:
On Mon, 27 Jul 2015, Giulio Bernardi wrote:
Sorry for the late reply, but it took me a little bit to recompile the kernel
(my laptop is slow) and I was not able to obtain any meaningful results (please
note I
https://bugzilla.kernel.org/show_bug.cgi?id=89471#c2
--
To unsubscribe from this list: send the line unsubscribe linux-usb in
the body of a message to majord...@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
46 matches
Mail list logo