Move TCPCI(Typec port controller interface) driver and rt1711h
driver out of staging.
Signed-off-by: Li Jun
---
drivers/staging/Kconfig| 2 --
drivers/staging/Makefile | 1 -
drivers/staging/typec/Kconfig | 22
While set polarity, we should keep the disconnected cc line to be
open.
Reviewed-by: Heikki Krogerus
Signed-off-by: Li Jun
---
drivers/staging/typec/tcpci.c | 18 ++
1 file changed, 14 insertions(+), 4 deletions(-)
diff --git a/drivers/staging/typec/tcpci.c b/drivers/staging
We need regmap_update_bits to avoid touch any other bits when
enable or disable vconn.
Reviewed-by: Guenter Roeck
Reviewed-by: Heikki Krogerus
Signed-off-by: Li Jun
---
drivers/staging/typec/tcpci.c | 9 +++--
1 file changed, 3 insertions(+), 6 deletions(-)
diff --git a/drivers/staging
TCPCI implementation may need SW to enable VBUS detection to generate
power status events.
Reviewed-by: Guenter Roeck
Reviewed-by: Heikki Krogerus
Signed-off-by: Li Jun
---
drivers/staging/typec/tcpci.c | 6 ++
1 file changed, 6 insertions(+)
diff --git a/drivers/staging/typec/tcpci.c b
As DRP port autonomously toggles the Rp/Rd need a start value to
begin with, so add one parameter for it in tcpm_start_drp_toggling.
Reviewed-by: Guenter Roeck
Reviewed-by: Heikki Krogerus
Signed-off-by: Li Jun
---
drivers/usb/typec/tcpm.c | 10 +-
1 file changed, 5 insertions(+), 5
As tcpm_register_port() and tcpci_register_port() never return
NULL and NULL is not a success in this case, use IS_ERR() to check
the return value of both.
Reviewed-by: Heikki Krogerus
Signed-off-by: Li Jun
---
drivers/staging/typec/tcpci.c | 4 ++--
1 file changed, 2 insertions(+), 2
This patch adds support of get typec and power delivery config from
firmware description.
Reviewed-by: Heikki Krogerus
Reviewed-by: Guenter Roeck
Signed-off-by: Li Jun
---
drivers/usb/typec/tcpm.c | 131 +++
1 file changed, 109 insertions(+), 22
From: Peter Chen
With that we can clear any pending events and the port is registered
so driver can be ready to handle typec events once we request irq.
Reviewed-by: Heikki Krogerus
Signed-off-by: Peter Chen
Signed-off-by: Li Jun
---
drivers/staging/typec/tcpci.c | 15 +--
1
Since we will use config settings via device properties, so
remove the hard code tcpci_tcpc_config.
Reviewed-by: Heikki Krogerus
Signed-off-by: Li Jun
---
drivers/staging/typec/tcpci.c | 7 ---
1 file changed, 7 deletions(-)
diff --git a/drivers/staging/typec/tcpci.c b/drivers/staging
Add nxp ptn5110 typec controller compatible string: "nxp,ptn5110",
which is a standard tcpci chip with power delivery support. Meanwhile
remove "usb,tcpci" because it doesn't follow the binding format rule
and has not been used yet.
Reviewed-by: Heikki Krogerus
S
This patch adds 3 APIs to get the typec port power and data type,
and preferred power role by its name string.
Reviewed-by: Heikki Krogerus
Signed-off-by: Li Jun
---
drivers/usb/typec/class.c | 58 +++
include/linux/usb/typec.h | 3 +++
2 files
Add fwnode handle to get the fwnode so we can get typec configs
it contains.
Suggested-by: Heikki Krogerus
Reviewed-by: Heikki Krogerus
Signed-off-by: Li Jun
---
drivers/staging/typec/tcpci.c | 7 +++
drivers/usb/typec/tcpm.c | 1 +
include/linux/usb/tcpm.h | 2 ++
3 files
ly enable vbus detect in tcpci driver rather than add a API.
- Details added in each patch.
[1] https://patchwork.kernel.org/patch/10231447/
[2] https://patchwork.kernel.org/patch/10276483/
[3] https://www.spinics.net/lists/linux-usb/msg166366.html
Li Jun (13):
dt-bindings: connector: add properti
Add bindings supported by current typec driver, so user can pass
all those properties via dt.
Reviewed-by: Rob Herring
Signed-off-by: Li Jun
---
.../bindings/connector/usb-connector.txt | 44 +++
include/dt-bindings/usb/pd.h | 62
n 1.1"
Reviewed-by: Rob Herring
Signed-off-by: Li Jun
---
.../devicetree/bindings/usb/typec-tcpci.txt| 49 ++
1 file changed, 49 insertions(+)
diff --git a/Documentation/devicetree/bindings/usb/typec-tcpci.txt
b/Documentation/devicetree/bindings/usb/typec-tcp
We need regmap_update_bits to avoid touch any other bits when
enable or disable vconn.
Reviewed-by: Guenter Roeck
Reviewed-by: Heikki Krogerus
Signed-off-by: Li Jun
---
drivers/staging/typec/tcpci.c | 9 +++--
1 file changed, 3 insertions(+), 6 deletions(-)
diff --git a/drivers/staging
Move TCPCI(Typec port controller interface) driver and rt1711h
driver out of staging.
Signed-off-by: Li Jun
---
drivers/staging/Kconfig| 2 --
drivers/staging/Makefile | 1 -
drivers/staging/typec/Kconfig | 22
As tcpm_register_port() and tcpci_register_port() never return
NULL and NULL is not a success in this case, use IS_ERR() to check
the return value of both.
Reviewed-by: Heikki Krogerus
Signed-off-by: Li Jun
---
drivers/staging/typec/tcpci.c | 4 ++--
1 file changed, 2 insertions(+), 2
TCPCI implementation may need SW to enable VBUS detection to generate
power status events.
Reviewed-by: Guenter Roeck
Reviewed-by: Heikki Krogerus
Signed-off-by: Li Jun
---
drivers/staging/typec/tcpci.c | 6 ++
1 file changed, 6 insertions(+)
diff --git a/drivers/staging/typec/tcpci.c b
From: Peter Chen
With that we can clear any pending events and the port is registered
so driver can be ready to handle typec events once we request irq.
Reviewed-by: Heikki Krogerus
Signed-off-by: Peter Chen
Signed-off-by: Li Jun
---
drivers/staging/typec/tcpci.c | 15 +--
1
This patch adds support of get typec and power delivery config from
firmware description.
Reviewed-by: Heikki Krogerus
Reviewed-by: Guenter Roeck
Signed-off-by: Li Jun
---
drivers/usb/typec/tcpm.c | 132 +++
1 file changed, 110 insertions(+), 22
While set polarity, we should keep the disconnected cc line to be
open.
Reviewed-by: Heikki Krogerus
Signed-off-by: Li Jun
---
drivers/staging/typec/tcpci.c | 18 ++
1 file changed, 14 insertions(+), 4 deletions(-)
diff --git a/drivers/staging/typec/tcpci.c b/drivers/staging
This patch adds 3 APIs to get the typec port power and data type,
and preferred power role by its name string.
Signed-off-by: Li Jun
---
drivers/usb/typec/class.c | 58 +++
include/linux/usb/typec.h | 3 +++
2 files changed, 57 insertions(+), 4
As DRP port autonomously toggles the Rp/Rd need a start value to
begin with, so add one parameter for it in tcpm_start_drp_toggling.
Reviewed-by: Guenter Roeck
Reviewed-by: Heikki Krogerus
Signed-off-by: Li Jun
---
drivers/usb/typec/tcpm.c | 10 +-
1 file changed, 5 insertions(+), 5
Since we will use config settings via device properties, so
remove the hard code tcpci_tcpc_config.
Reviewed-by: Heikki Krogerus
Signed-off-by: Li Jun
---
drivers/staging/typec/tcpci.c | 7 ---
1 file changed, 7 deletions(-)
diff --git a/drivers/staging/typec/tcpci.c b/drivers/staging
Add fwnode handle to get the fwnode so we can get typec configs
it contains.
Suggested-by: Heikki Krogerus
Reviewed-by: Heikki Krogerus
Signed-off-by: Li Jun
---
drivers/staging/typec/tcpci.c | 7 +++
drivers/usb/typec/tcpm.c | 1 +
include/linux/usb/tcpm.h | 2 ++
3 files
Add nxp ptn5110 typec controller compatible string: "nxp,ptn5110",
which is a standard tcpci chip with power delivery support. Meanwhile
remove "usb,tcpci" because it doesn't follow the binding format rule
and has not been used yet.
Reviewed-by: Heikki Krogerus
S
n 1.1"
Reviewed-by: Rob Herring
Signed-off-by: Li Jun
---
.../devicetree/bindings/usb/typec-tcpci.txt| 49 ++
1 file changed, 49 insertions(+)
diff --git a/Documentation/devicetree/bindings/usb/typec-tcpci.txt
b/Documentation/devicetree/bindings/usb/typec-tcp
Add bindings supported by current typec driver, so user can pass
all those properties via dt.
Reviewed-by: Rob Herring
Signed-off-by: Li Jun
---
.../bindings/connector/usb-connector.txt | 44 +++
include/dt-bindings/usb/pd.h | 62
river when set polarity.
- Directly enable vbus detect in tcpci driver rather than add a API.
- Details added in each patch.
[1] https://patchwork.kernel.org/patch/10231447/
[2] https://patchwork.kernel.org/patch/10276483/
[3] https://www.spinics.net/lists/linux-usb/msg166366.html
Li Jun (13):
dt
TCPCI implementation may need SW to enable VBUS detection to generate
power status events.
Reviewed-by: Guenter Roeck <li...@roeck-us.net>
Signed-off-by: Li Jun <jun...@nxp.com>
---
drivers/staging/typec/tcpci.c | 6 ++
1 file changed, 6 insertions(+)
diff --git a/drivers/s
Move TCPCI(Typec port controller interface) driver and rt1711h
driver out of staging.
Signed-off-by: Li Jun <jun...@nxp.com>
---
drivers/staging/Kconfig| 2 --
drivers/staging/Makefile | 1 -
drivers/staging/typec/Kconfig
We need regmap_update_bits to avoid touch any other bits when
enable or disable vconn.
Reviewed-by: Guenter Roeck <li...@roeck-us.net>
Signed-off-by: Li Jun <jun...@nxp.com>
---
drivers/staging/typec/tcpci.c | 9 +++--
1 file changed, 3 insertions(+), 6 deletions(-)
diff --g
In case of drp toggling, we may need set correct cc value for role control
after attach as it may never been set.
Signed-off-by: Li Jun <jun...@nxp.com>
---
drivers/usb/typec/tcpm.c | 5 +
1 file changed, 5 insertions(+)
diff --git a/drivers/usb/typec/tcpm.c b/drivers/usb/typec/tcpm.c
This patch adds support of get typec and power delivery config from
firmware description.
Signed-off-by: Li Jun <jun...@nxp.com>
---
drivers/usb/typec/tcpm.c | 132 +++
1 file changed, 110 insertions(+), 22 deletions(-)
diff --git a/drivers/usb
While set polarity, we should keep the disconnected cc line to be
open.
Signed-off-by: Li Jun <jun...@nxp.com>
---
drivers/staging/typec/tcpci.c | 18 ++
1 file changed, 14 insertions(+), 4 deletions(-)
diff --git a/drivers/staging/typec/tcpci.c b/drivers/staging/typec/t
As DRP port autonomously toggles the Rp/Rd need a start value to
begin with, so add one parameter for it in tcpm_start_drp_toggling.
Reviewed-by: Guenter Roeck <li...@roeck-us.net>
Signed-off-by: Li Jun <jun...@nxp.com>
---
drivers/usb/typec/tcpm.c | 10 +-
1 file changed,
Since we will use config settings via device properties, so
remove the hard code tcpci_tcpc_config.
Signed-off-by: Li Jun <jun...@nxp.com>
---
drivers/staging/typec/tcpci.c | 7 ---
1 file changed, 7 deletions(-)
diff --git a/drivers/staging/typec/tcpci.c b/drivers/staging/typec/t
From: Peter Chen <peter.c...@nxp.com>
With that we can clear any pending events and the port is registered
so driver can be ready to handle typec events once we request irq.
Signed-off-by: Peter Chen <peter.c...@nxp.com>
Signed-off-by: Li Jun <jun...@nxp.com>
---
drivers/sta
This patch adds 3 APIs to get the typec port power and data type,
and preferred power role by its name string.
Signed-off-by: Li Jun <jun...@nxp.com>
---
drivers/usb/typec/class.c | 50 +++
include/linux/usb/typec.h | 3 +++
2 files chang
Add nxp ptn5110 typec controller compatible string: "nxp,ptn5110",
which is a standard tcpci chip with power delivery support. Meanwhile
remove "usb,tcpci" because it doesn't follow the binding format rule
and has not been used yet.
Signed-off-by: Li Jun <jun...@nxp.co
river rather than add a API.
- Details added in each patch.
[1] https://patchwork.kernel.org/patch/10231447/
[2] https://patchwork.kernel.org/patch/10276483/
[3] https://www.spinics.net/lists/linux-usb/msg166366.html
Li Jun (14):
dt-bindings: connector: add properties for typec
dt-bindings: usb: add
n 1.1"
Reviewed-by: Rob Herring <r...@kernel.org>
Signed-off-by: Li Jun <jun...@nxp.com>
---
.../devicetree/bindings/usb/typec-tcpci.txt| 49 ++
1 file changed, 49 insertions(+)
diff --git a/Documentation/devicetree/bindings/usb/typec-tcpci.txt
b/Do
As tcpm_register_port() and tcpci_register_port() never return
NULL and NULL is not a success in this case, use IS_ERR() to check
the return value of both.
Signed-off-by: Li Jun <jun...@nxp.com>
---
drivers/staging/typec/tcpci.c | 4 ++--
1 file changed, 2 insertions(+), 2 deletions(-)
Add fwnode handle to get the fwnode so we can get typec configs
it contains.
Suggested-by: Heikki Krogerus <heikki.kroge...@linux.intel.com>
Signed-off-by: Li Jun <jun...@nxp.com>
---
drivers/staging/typec/tcpci.c | 7 +++
drivers/usb/typec/tcpm.c | 1 +
include/linu
Add bindings supported by current typec driver, so user can pass
all those properties via dt.
Signed-off-by: Li Jun <jun...@nxp.com>
---
.../bindings/connector/usb-connector.txt | 44 +++
include/dt-bindings/usb/pd.h | 62 +++
We need regmap_update_bits to avoid touch any other bits when
enable or disable vconn.
Reviewed-by: Guenter Roeck <li...@roeck-us.net>
Signed-off-by: Li Jun <jun...@nxp.com>
---
drivers/staging/typec/tcpci.c | 9 +++--
1 file changed, 3 insertions(+), 6 deletions(-)
diff --g
Move TCPCI(Typec port controller interface) driver out of staging.
Signed-off-by: Li Jun <jun...@nxp.com>
---
drivers/staging/Kconfig| 2 --
drivers/staging/Makefile | 1 -
drivers/staging/typec/TODO | 5 -
drivers/usb/typec/Kconfig
While set polarity, we should keep the not connecting cc line to be
open.
Signed-off-by: Li Jun <jun...@nxp.com>
---
drivers/staging/typec/tcpci.c | 18 ++
1 file changed, 14 insertions(+), 4 deletions(-)
diff --git a/drivers/staging/typec/tcpci.c b/drivers/staging/typec/t
In case of drp toggling, we may need set correct cc value for role control
after attach as it may never been set.
Signed-off-by: Li Jun <jun...@nxp.com>
---
drivers/usb/typec/tcpm.c | 5 +
1 file changed, 5 insertions(+)
diff --git a/drivers/usb/typec/tcpm.c b/drivers/usb/typec/tcpm.c
TCPCI implementation may need SW to enable VBUS detection to generate
power status events.
Reviewed-by: Guenter Roeck <li...@roeck-us.net>
Signed-off-by: Li Jun <jun...@nxp.com>
---
drivers/staging/typec/tcpci.c | 6 ++
1 file changed, 6 insertions(+)
diff --git a/drivers/s
As DRP port autonomously toggles the Rp/Rd need a start value to
begin with, so add one parameter for it in tcpm_start_drp_toggling.
Reviewed-by: Guenter Roeck <li...@roeck-us.net>
Signed-off-by: Li Jun <jun...@nxp.com>
---
drivers/usb/typec/tcpm.c | 10 +-
1 file changed,
From: Peter Chen <peter.c...@nxp.com>
With that we can clear any pending events and the port is registered
so driver can be ready to handle typec events once we request irq.
Signed-off-by: Peter Chen <peter.c...@nxp.com>
Signed-off-by: Li Jun <jun...@nxp.com>
---
drivers/sta
Add fwnode handle to get the fwnode so we can get typec configs
it contains.
Suggested-by: Heikki Krogerus <heikki.kroge...@linux.intel.com>
Signed-off-by: Li Jun <jun...@nxp.com>
---
drivers/staging/typec/tcpci.c | 7 +++
drivers/usb/typec/tcpm.c | 1 +
include/linu
Since we will use config settings via device properties, so
remove the hard code tcpci_tcpc_config.
Signed-off-by: Li Jun <jun...@nxp.com>
---
drivers/staging/typec/tcpci.c | 7 ---
1 file changed, 7 deletions(-)
diff --git a/drivers/staging/typec/tcpci.c b/drivers/staging/typec/t
Add nxp ptn5110 typec controller compatible string: usb-tcpci,ptn5110,
which is a standard tcpci chip with power delivery support.
Signed-off-by: Li Jun <jun...@nxp.com>
---
drivers/staging/typec/tcpci.c | 1 +
1 file changed, 1 insertion(+)
diff --git a/drivers/staging/typec/tcpci.c b/d
This patch adds support of get typec and power delivery config from
firmware description.
Signed-off-by: Li Jun <jun...@nxp.com>
---
drivers/usb/typec/tcpm.c | 133 +++
1 file changed, 111 insertions(+), 22 deletions(-)
diff --git a/drivers/usb
This patch adds 3 APIs to get the typec port power and data type,
and preferred power role by its name string.
Signed-off-by: Li Jun <jun...@nxp.com>
---
drivers/usb/typec/class.c | 52 +++
include/linux/usb/typec.h | 3 +++
2 files chang
n 1.1"
Signed-off-by: Li Jun <jun...@nxp.com>
---
.../devicetree/bindings/usb/typec-tcpci.txt| 49 ++
1 file changed, 49 insertions(+)
diff --git a/Documentation/devicetree/bindings/usb/typec-tcpci.txt
b/Documentation/devicetree/bindings/usb/typec-tcpci.t
/patchwork.kernel.org/patch/10231447/
[2] https://patchwork.kernel.org/patch/10276483/
[3] https://www.spinics.net/lists/linux-usb/msg166366.html
Li Jun (13):
dt-bindings: connector: add properties for typec
dt-bindings: usb: add documentation for typec port controller(TCPCI)
staging: typec:
Add bingdings supported by current typec driver, so user can pass
all those properties via dt.
Signed-off-by: Li Jun <jun...@nxp.com>
---
.../bindings/connector/usb-connector.txt | 44 +++
include/dt-bindings/usb/pd.h | 62 +++
limit the PDO matching between the same type, so the
rdo operating and max current/power calculation should be
updated accordingly.
[1]https://patchwork.kernel.org/patch/10342299/
Signed-off-by: Li Jun <jun...@nxp.com>
---
drivers/usb/typec/tcpm.
Remove max-sink-* properties since they are deprecated.
Reviewed-by: Rob Herring <r...@kernel.org>
Reviewed-by: Hans de Goede <hdego...@redhat.com>
Signed-off-by: Li Jun <jun...@nxp.com>
---
Documentation/devicetree/bindings/usb/fcs,fusb302.txt | 6 --
1 file changed, 6
f one sink pdo.
Reviewed-by: Hans de Goede <hdego...@redhat.com>
Signed-off-by: Li Jun <jun...@nxp.com>
---
drivers/usb/typec/tcpm.c | 105 ++-
1 file changed, 67 insertions(+), 38 deletions(-)
diff --git a/drivers/usb/typec/tcpm.c b/drivers/
Since there is no user of max_snk_*, so we can remove them from tcpm.
Reviewed-by: Hans de Goede <hdego...@redhat.com>
Signed-off-by: Li Jun <jun...@nxp.com>
---
drivers/usb/typec/tcpm.c | 12
include/linux/usb/tcpm.h | 9 -
2 files changed, 21 deletions(-)
Since max_snk_* is to be deprecated, so remove max_snk_* by adding a
variable PDO for sink config.
Reviewed-by: Hans de Goede <hdego...@redhat.com>
Signed-off-by: Li Jun <jun...@nxp.com>
---
drivers/usb/typec/fusb302/fusb302.c | 42 -
1 file
Since max_snk_* is to be deprecated, so remove max_snk_* by adding a
variable PDO for sink config.
Reviewed-by: Hans de Goede <hdego...@redhat.com>
Signed-off-by: Li Jun <jun...@nxp.com>
---
drivers/usb/typec/typec_wcove.c | 4 +---
1 file changed, 1 insertion(+), 3 deletions(-)
he device properties passing max_snk_* to be a
variable sink pdo for fusb302.
Li Jun (5):
usb: typec: tcpm: pdo matching optimization
usb: typec: fusb302: remove max_snk_* for sink config
dt-bindings: usb: fusb302: remove max-sink-* properties
usb: typec: wcove: remove max_snk_* for sink confi
Since there is no user of max_snk_*, so we can remove them from tcpm.
Reviewed-by: Hans de Goede <hdego...@redhat.com>
Signed-off-by: Li Jun <jun...@nxp.com>
---
drivers/usb/typec/tcpm.c | 12
include/linux/usb/tcpm.h | 9 -
2 files changed, 21 deletions(-)
Remove max-sink-* properties since they are deprecated.
Reviewed-by: Rob Herring <r...@kernel.org>
Reviewed-by: Hans de Goede <hdego...@redhat.com>
Signed-off-by: Li Jun <jun...@nxp.com>
---
Documentation/devicetree/bindings/usb/fcs,fusb302.txt | 6 --
1 file changed, 6
Since max_snk_* is to be deprecated, so remove max_snk_* by adding a
variable PDO for sink config.
Reviewed-by: Hans de Goede <hdego...@redhat.com>
Signed-off-by: Li Jun <jun...@nxp.com>
---
drivers/usb/typec/typec_wcove.c | 4 +---
1 file changed, 1 insertion(+), 3 deletions(-)
f one sink pdo.
Reviewed-by: Hans de Goede <hdego...@redhat.com>
Signed-off-by: Li Jun <jun...@nxp.com>
---
drivers/usb/typec/tcpm.c | 102 ++-
1 file changed, 65 insertions(+), 37 deletions(-)
diff --git a/drivers/usb/typec/tcpm.c b/drivers/
- Convert the device properties passing max_snk_* to be a
variable sink pdo for fusb302.
Li Jun (5):
usb: typec: tcpm: pdo matching optimization
usb: typec: fusb302: remove max_snk_* for sink config
dt-bindings: usb: fusb302: remove max-sink-* properties
usb: typec: wcove: remove max_snk_* f
Since max_snk_* is to be deprecated, so remove max_snk_* by adding a
variable PDO for sink config.
Reviewed-by: Hans de Goede <hdego...@redhat.com>
Signed-off-by: Li Jun <jun...@nxp.com>
---
drivers/usb/typec/fusb302/fusb302.c | 34 --
1 file
Since max_snk_* is to be deprecated, so remove max_snk_* by adding a
variable PDO for sink config.
Signed-off-by: Li Jun <jun...@nxp.com>
---
drivers/usb/typec/fusb302/fusb302.c | 34 --
1 file changed, 20 insertions(+), 14 deletions(-)
diff --git a/drive
Remove max-sink-* properties since they are deprecated.
Reviewed-by: Rob Herring <r...@kernel.org>
Signed-off-by: Li Jun <jun...@nxp.com>
---
Documentation/devicetree/bindings/usb/fcs,fusb302.txt | 6 --
1 file changed, 6 deletions(-)
diff --git a/Documentation/devicetree/bind
Since there is no user of max_snk_*, so we can remove them from tcpm.
Signed-off-by: Li Jun <jun...@nxp.com>
---
drivers/usb/typec/tcpm.c | 12
include/linux/usb/tcpm.h | 9 -
2 files changed, 21 deletions(-)
diff --git a/drivers/usb/typec/tcpm.c b/drivers/usb/typec/
setting as Hans suggested.
- Add Rob's reviewed-by for dt-binding patch.
Changes for v2:
- rebase the 1st patch to be based on commit 6f566af34628
("Revert "typec: tcpm: Only request matching pdos"").
- Convert the device properties passing max_snk_* to be a
variable sink
Since max_snk_* is to be deprecated, so remove max_snk_* by adding a
variable PDO for sink config.
Signed-off-by: Li Jun <jun...@nxp.com>
---
drivers/usb/typec/typec_wcove.c | 4 +---
1 file changed, 1 insertion(+), 3 deletions(-)
diff --git a/drivers/usb/typec/typec_wcove.c b/drivers/usb
f one sink pdo.
Signed-off-by: Li Jun <jun...@nxp.com>
---
drivers/usb/typec/tcpm.c | 102 ++-
1 file changed, 65 insertions(+), 37 deletions(-)
diff --git a/drivers/usb/typec/tcpm.c b/drivers/usb/typec/tcpm.c
index 677d121..c127339 100644
--- a/d
We need regmap_update_bits to avoid touch any other bits when
enable or disable vconn.
Reviewed-by: Guenter Roeck <li...@roeck-us.net>
Signed-off-by: Li Jun <jun...@nxp.com>
---
drivers/staging/typec/tcpci.c | 9 +++--
1 file changed, 3 insertions(+), 6 deletions(-)
diff --g
Move TCPCI(Typec port controller interface) driver out of staging.
Signed-off-by: Li Jun <jun...@nxp.com>
---
drivers/staging/Kconfig| 2 --
drivers/staging/Makefile | 1 -
drivers/staging/typec/Kconfig | 14 --
drivers/staging/typec/Ma
While set polarity, we should keep the not connecting cc line to be
open.
Signed-off-by: Li Jun <jun...@nxp.com>
---
drivers/staging/typec/tcpci.c | 18 ++
1 file changed, 14 insertions(+), 4 deletions(-)
diff --git a/drivers/staging/typec/tcpci.c b/drivers/staging/typec/t
With that we can clear any pending events and the port is registered
so driver can be ready to handle typec events once we request irq.
Signed-off-by: Peter Chen <peter.c...@nxp.com>
Signed-off-by: Li Jun <jun...@nxp.com>
---
drivers/staging/typec/tcpci.c | 15 ---
1 fil
As DRP port autonomously toggles the Rp/Rd need a start value to
begin with, so add one parameter for it in tcpm_start_drp_toggling.
Reviewed-by: Guenter Roeck <li...@roeck-us.net>
Signed-off-by: Li Jun <jun...@nxp.com>
---
drivers/usb/typec/tcpm.c | 10 +-
1 file changed,
TCPCI implementation may need SW to enable VBUS detection to generate
power status events.
Reviewed-by: Guenter Roeck <li...@roeck-us.net>
Signed-off-by: Li Jun <jun...@nxp.com>
---
drivers/staging/typec/tcpci.c | 6 ++
1 file changed, 6 insertions(+)
diff --git a/drivers/s
In case of drp toggling, we may need set correct cc value for role control
after attach as it may never been set.
Signed-off-by: Li Jun <jun...@nxp.com>
---
drivers/usb/typec/tcpm.c | 5 +
1 file changed, 5 insertions(+)
diff --git a/drivers/usb/typec/tcpm.c b/drivers/usb/typec/tcpm.c
Add nxp ptn5110 typec controller compatible string: usb-tcpci,ptn5110,
which is a standard tcpci chip with power delivery support.
Signed-off-by: Li Jun <jun...@nxp.com>
---
drivers/staging/typec/tcpci.c | 1 +
1 file changed, 1 insertion(+)
diff --git a/drivers/staging/typec/tcpci.c b/d
This patch adds support of get typec and power delivery config from
firmware description.
Signed-off-by: Li Jun <jun...@nxp.com>
---
drivers/usb/typec/tcpm.c | 140 ++-
1 file changed, 115 insertions(+), 25 deletions(-)
diff --git a/drivers/usb
n 1.1"
Signed-off-by: Li Jun <jun...@nxp.com>
---
.../devicetree/bindings/usb/typec-tcpci.txt| 33 ++
1 file changed, 33 insertions(+)
diff --git a/Documentation/devicetree/bindings/usb/typec-tcpci.txt
b/Documentation/devicetree/bindings/usb/typec-tcpci.t
This patch adds 3 APIs to get the typec port power and data type,
and preferred power role by its name string.
Suggested-by: Heikki Krogerus <heikki.kroge...@linux.intel.com>
Signed-off-by: Li Jun <jun...@nxp.com>
---
drivers/usb/typec/
Add fwnode handle to get the fwnode so we can get typec configs
it contains.
Suggested-by: Heikki Krogerus <heikki.kroge...@linux.intel.com>
Signed-off-by: Li Jun <jun...@nxp.com>
---
drivers/staging/typec/tcpci.c | 14 +++---
drivers/usb/typec/tcpm.c | 1 +
inclu
Add bingdings supported by current typec driver, so user can pass
all those properties via dt.
Signed-off-by: Li Jun <jun...@nxp.com>
---
.../bindings/connector/usb-connector.txt | 39 ++
1 file changed, 39 insertions(+)
diff --git a/Documentation/devi
ed cc line open,
set cc1/cc2 to be open in tcpci driver when set polarity.
- Directly enable vbus detect in tcpci driver rather than add a API.
- Details added in each patch.
[1] https://patchwork.kernel.org/patch/10231447/
[2] https://patchwork.kernel.org/patch/10276483/
[3] https://www.spinics.net/list
Since there is no user of max_snk_*, so we can remove them from tcpm.
Signed-off-by: Li Jun <jun...@nxp.com>
---
drivers/usb/typec/tcpm.c | 12
include/linux/usb/tcpm.h | 9 -
2 files changed, 21 deletions(-)
diff --git a/drivers/usb/typec/tcpm.c b/drivers/usb/typec/
Since max_snk_* is to be deprecated, so remove max_snk_* by adding a
variable PDO for sink config.
Signed-off-by: Li Jun <jun...@nxp.com>
---
drivers/usb/typec/typec_wcove.c | 4 +---
1 file changed, 1 insertion(+), 3 deletions(-)
diff --git a/drivers/usb/typec/typec_wcove.c b/drivers/usb
Remove max-sink-* properties since they are deprecated.
Signed-off-by: Li Jun <jun...@nxp.com>
---
Documentation/devicetree/bindings/usb/fcs,fusb302.txt | 6 --
1 file changed, 6 deletions(-)
diff --git a/Documentation/devicetree/bindings/usb/fcs,fusb302.txt
b/Documentation/devi
Since max_snk_* is to be deprecated, so remove max_snk_* by adding a
variable PDO for sink config.
Signed-off-by: Li Jun <jun...@nxp.com>
---
drivers/usb/typec/fusb302/fusb302.c | 51 +++--
1 file changed, 37 insertions(+), 14 deletions(-)
diff --git a/d
be a
variable sink pdo for fusb302.
Li Jun (5):
usb: typec: tcpm: pdo matching optimization
usb: typec: fusb302: remove max_snk_* for sink config
dt-bindings: usb: fusb302: remove max-sink-* properties
usb: typec: wcove: remove max_snk_* for sink config
usb: typec: tcpm: rem
f one sink pdo.
Signed-off-by: Li Jun <jun...@nxp.com>
---
drivers/usb/typec/tcpm.c | 127 +--
1 file changed, 90 insertions(+), 37 deletions(-)
diff --git a/drivers/usb/typec/tcpm.c b/drivers/usb/typec/tcpm.c
index 677d121..50a1979 100644
--- a/d
1 - 100 of 759 matches
Mail list logo
