On Fri, 30 Aug 2013, Kevin Archer wrote:
I figured it wasn't the REAL fix!
Thanks for the heads up on 3.12 though!
By the way, have you checked to see if there are any BIOS updates
available for your computer? That might fix the problem.
Alan Stern
--
To unsubscribe from this list: send
On Fri, 30 Aug 2013, Kevin Archer wrote:
reading https://wiki.ubuntu.com/Kernel/KernelBisection now
On Fri, Aug 30, 2013 at 10:48 AM, Kevin Archer kevin.arche...@gmail.com
wrote:
yes they were plugged in.
Bisection?
Indeed.
The only way I can think of to explain what you saw is if
I have narrowed it down to changes from 2.6.39.4 to 3.0.0
On Fri, Aug 30, 2013 at 11:18 AM, Alan Stern st...@rowland.harvard.edu wrote:
On Fri, 30 Aug 2013, Kevin Archer wrote:
reading https://wiki.ubuntu.com/Kernel/KernelBisection now
On Fri, Aug 30, 2013 at 10:48 AM, Kevin Archer
Anything below jump out at you?
running git log between versions i gives me:
--
~/ubuntu-oneiric$ git log --oneline 61c4f2c..02f8c6a | grep xhci
95a2424 Merge branch 'for-usb-linus' of
git+ssh://master.kernel.org/pub/scm/linux/kernel/git/sarah/xhci into
usb-linus
b3df3f9 xhci: Always set
On Fri, 30 Aug 2013, Kevin Archer wrote:
Anything below jump out at you?
running git log between versions i gives me:
--
~/ubuntu-oneiric$ git log --oneline 61c4f2c..02f8c6a | grep xhci
...
69e848c Intel xhci: Support EHCI/xHCI port switching.
...
That one certainly seems
I changed the pci.quirks.c file based on
http://people.canonical.com/~lexical/bugs/lp981710/diff
that I found while searching for the commit that you suggested.
diff --git a/drivers/usb/host/pci-quirks.c b/drivers/usb/host/pci-quirks.c
index 833b3c6..aac5b03 100644
---
On Fri, 30 Aug 2013, Kevin Archer wrote:
I changed the pci.quirks.c file based on
http://people.canonical.com/~lexical/bugs/lp981710/diff
that I found while searching for the commit that you suggested.
diff --git a/drivers/usb/host/pci-quirks.c b/drivers/usb/host/pci-quirks.c
index
I figured it wasn't the REAL fix!
Thanks for the heads up on 3.12 though!
On Fri, Aug 30, 2013 at 4:56 PM, Alan Stern st...@rowland.harvard.edu wrote:
On Fri, 30 Aug 2013, Kevin Archer wrote:
I changed the pci.quirks.c file based on
http://people.canonical.com/~lexical/bugs/lp981710/diff
On Wed, 28 Aug 2013, Kevin Archer wrote:
unbind yielded nothing
using 3.11.0-031100rc5-generic
lsusb -v -s 1:2
Bus 001 Device 002: ID 8087:0024 Intel Corp. Integrated Rate Matching Hub
...
Hub Port Status:
Port 1: .0103 power enable connect
Port 2: .0100 power
Port
On Tue, 27 Aug 2013, Kevin Archer wrote:
rmmod xhci-hcd yields:
libkmod: ERROR ../libkmod/libkmod-module.c:753
kmod_module_remove_module: could not remove 'xhci_hcd': No such file
or directory
Error: could not remove module xhci-hcd: No such file or directory
Oops. Apparently the driver
On Mon, 26 Aug 2013, Kevin Archer wrote:
I think the link in my first email was wrong
here is the correct link
https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1210858
I did run 2.6.33 and 2.6.39 in which the 2 usb ports did appear to
work, but the Xserver did not work correctly so I
I think the link in my first email was wrong
here is the correct link
https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1210858
I did run 2.6.33 and 2.6.39 in which the 2 usb ports did appear to
work, but the Xserver did not work correctly so I only had command
line.
On Sat, Aug 24, 2013 at
On Tue, 20 Aug 2013, Kevin Archer wrote:
Here are the registers for :00:1a.0 and :00:1d.0 prior to
inserting any usb 2.0 device
I have not included the after logs as there were no changes that
occurred to the file(s) after a device was plugged in.
Forget about the 1d.0 stuff; the
On Tue, 20 Aug 2013, Kevin Archer wrote:
DMESG log from CONFIG_DUMMY_IRQ per your instructions
[ 8561.353244] ath9k: ath9k: Driver unloaded
[ 8627.529948] ehci-pci :00:1a.0: remove, state 1
[ 8627.529961] ehci-pci :00:1a.0: roothub graceful disconnect
[ 8627.529973] usb usb1: USB
Here are the registers for :00:1a.0 and :00:1d.0 prior to
inserting any usb 2.0 device
I have not included the after logs as there were no changes that
occurred to the file(s) after a device was plugged in.
Will work on and add the CONFIG_DUMMY_IRQ logs, but it appears there
are errors in
DMESG log from CONFIG_DUMMY_IRQ per your instructions
[ 8561.353244] ath9k: ath9k: Driver unloaded
[ 8627.529948] ehci-pci :00:1a.0: remove, state 1
[ 8627.529961] ehci-pci :00:1a.0: roothub graceful disconnect
[ 8627.529973] usb usb1: USB disconnect, device number 1
[ 8627.529979] usb
Issue similar to Ming Lei post of June 26th 2013
USB 2.0 ports appear to operate correctly in 2.6.33 and 2.6.39 but
not after going to 3.1
See detailed log in below link:
https://bugs.launchpad.net/bugs/1210858
Thank you
--
To unsubscribe from this list: send the line
On Sat, 17 Aug 2013, Kevin Archer wrote:
Issue similar to Ming Lei post of June 26th 2013
USB 2.0 ports appear to operate correctly in 2.6.33 and 2.6.39 but
not after going to 3.1
See detailed log in below link:
https://bugs.launchpad.net/bugs/1210858
The log file
18 matches
Mail list logo
