On Mon, Sep 23, 2013 at 10:21:23AM +0200, Oleksij Rempel wrote:
Understood, just making sure this was still potentially useful considering
what I found out since my last message.
Which version of powertop are you actually using? None of current
The latest, i.e. 2.4.
versions would show
Am 28.09.2013 20:08, schrieb Marc MERLIN:
On Mon, Sep 23, 2013 at 10:21:23AM +0200, Oleksij Rempel wrote:
Understood, just making sure this was still potentially useful considering
what I found out since my last message.
Which version of powertop are you actually using? None of current
The
Am 22.09.2013 22:36, schrieb Marc MERLIN:
On Sun, Sep 22, 2013 at 04:32:08PM -0400, Alan Stern wrote:
I'm somehow thinking there is a driver or hardware problem when the device
does get stuck in a mode where it won't sleep properly again until the next
reboot (just unloading/loading the driver
On Wed, 18 Sep 2013, Marc MERLIN wrote:
Howdy,
I have a T530 with a built in webcam that uses the uvcvideo driver.
Kernel 3.10.6, but the problem has been there for many kernel versions.
From time to time (not always) it shows up at the top of powertop with
an unexplained high power use
On Sun, Sep 22, 2013 at 12:38:56PM -0400, Alan Stern wrote:
gandalfthegreat:/sys/bus/usb/devices/3-1.6/power# grep . *
active_duration:61227648
async:enabled
autosuspend:2
autosuspend_delay_ms:2000
connected_duration:66830880
control:auto
level:auto
persist:1
On Sun, 22 Sep 2013, Marc MERLIN wrote:
On Sun, Sep 22, 2013 at 12:38:56PM -0400, Alan Stern wrote:
gandalfthegreat:/sys/bus/usb/devices/3-1.6/power# grep . *
active_duration:61227648
async:enabled
autosuspend:2
autosuspend_delay_ms:2000
connected_duration:66830880
On Sun, Sep 22, 2013 at 04:32:08PM -0400, Alan Stern wrote:
I'm somehow thinking there is a driver or hardware problem when the device
does get stuck in a mode where it won't sleep properly again until the next
reboot (just unloading/loading the driver does not fix this).
That's quite
On Thu, Sep 19, 2013 at 12:35 PM, Marc MERLIN m...@merlins.org wrote:
gandalfthegreat:/sys/bus/usb/devices/3-1.6/power# grep . *
active_duration:61227648
async:enabled
autosuspend:2
autosuspend_delay_ms:2000
connected_duration:66830880
control:auto
level:auto
persist:1
Howdy,
I have a T530 with a built in webcam that uses the uvcvideo driver.
Kernel 3.10.6, but the problem has been there for many kernel versions.
From time to time (not always) it shows up at the top of powertop with
an unexplained high power use while I'm not using the camera.
Powertop says
