On Fri, 5 Sep 2014, Johan Hovold wrote:
Here's the always-poll quirk that is needed to prevent the Elan
touchscreen from disconnecting itself from the bus.
These patches are against v3.16.1, but applies fine to hid-next.
Note that this series is not dependent on the device-qualifier quirk
On Fri, 2014-09-05 at 10:15 -0400, Alan Stern wrote:
On Fri, 5 Sep 2014, Oliver Neukum wrote:
Hi,
looking at your patch for resetting HID devices
it occurred to me that there's a race between
a queued reset and a port power switch. Switching
a port's power state implies to a reset
This patch introduces virtual endpoint address mapping. It separates
function logic form physical endpoint addresses making it more hardware
independent.
Following modifications changes user space API, so to enable them user
have to switch on the FUNCTIONFS_VIRTUAL_ADDR flag in descriptors.
This patch introduces ioctl named FUNCTIONFS_ENDPOINT_DESC, which
returns endpoint descriptor to userspace. It works only if function
is active.
Signed-off-by: Robert Baldyga r.bald...@samsung.com
Acked-by: Michal Nazarewicz min...@mina86.com
---
drivers/usb/gadget/function/f_fs.c | 23
Hi Felipe,
I have rebased this patchset at your testing/next/ branch.
Best regards
Robert Baldyga
Robert Baldyga (2):
usb: gadget: f_fs: add ioctl returning ep descriptor
usb: gadget: f_fs: virtual endpoint address mapping
drivers/usb/gadget/function/f_fs.c | 46
To handle class requests received on ep0, the driver needs to access the
length and direction of the request after the setup stage. It currently
stores them in a v4l2 event during the setup stage, and then copies them
from the event structure to the driver internal state structure when the
event
Hi Felipe,
These patches have previously been posted to linux-usb as part of the
following series.
[PATCH 0/2] Move UVC gagdet to video_ioctl2
[PATCH 0/7] g_webcam: Preparation for configfs
I've rebased them on top of your master branches. The result has been
successfully tested by Andrzej
From: Andrzej Pietrasiewicz andrze...@samsung.com
Compile uvc_queue, uvc_v4l2, uvc_video separately so that later they can
be all combined in a separately compiled f_uvc.
Signed-off-by: Andrzej Pietrasiewicz andrze...@samsung.com
Tested-by: Michael Grzeschik m.grzesc...@pengutronix.de
[Make
From: Andrzej Pietrasiewicz andrze...@samsung.com
Use the new function registration interface. It is required
in order to integrate configfs support.
Signed-off-by: Andrzej Pietrasiewicz andrze...@samsung.com
Tested-by: Michael Grzeschik m.grzesc...@pengutronix.de
[Updated copyright years]
From: Andrzej Pietrasiewicz andrze...@samsung.com
Prepare for separate compilation of uvc function's components.
Some symbols will have to be exported, so rename to avoid
conflicts with functions of the same name in host uvc.
Signed-off-by: Andrzej Pietrasiewicz andrze...@samsung.com
Tested-by:
From: Andrzej Pietrasiewicz andrze...@samsung.com
When configfs support is integrated the future uvc function
module must not take any parameters. Move parameters to
webcam.
Signed-off-by: Andrzej Pietrasiewicz andrze...@samsung.com
Tested-by: Michael Grzeschik m.grzesc...@pengutronix.de
Simplify ioctl handling by using video_ioctl2.
Signed-off-by: Laurent Pinchart laurent.pinch...@ideasonboard.com
Acked-by: Andrzej Pietrasiewicz andrze...@samsung.com
---
drivers/usb/gadget/function/f_uvc.c| 2 +
drivers/usb/gadget/function/uvc_v4l2.c | 298
From: Andrzej Pietrasiewicz andrze...@samsung.com
There are no users of the old interface left. Remove it.
Signed-off-by: Andrzej Pietrasiewicz andrze...@samsung.com
Tested-by: Michael Grzeschik m.grzesc...@pengutronix.de
Signed-off-by: Laurent Pinchart laurent.pinch...@ideasonboard.com
---
On 09/04/2014 09:49 PM, Felipe Balbi wrote:
Hi,
On Thu, Sep 04, 2014 at 07:37:20PM +, Paul Zimmerman wrote:
From: Felipe Balbi [mailto:ba...@ti.com]
Sent: Thursday, September 04, 2014 12:18 PM
On Thu, Sep 04, 2014 at 12:04:23PM -0700, Paul Zimmerman wrote:
From: Kamil Debski
Sehr geehrte Begünstigte,
Sie haben als einzige Begünstigte der Summe von fünfhunderttausend Euro (€
500.000,00 Euro), die hier in WESTERN UNION OFFICE von der ONU Organisation für
Sie hinterlegt ausgewählt wurde.
Bitte kontaktieren Sie uns für Ansprüche Email: wes_sp...@outlook.com
This patchset contains fixes for dwc2/gadget driver.
It should apply to stable-3.16.
Best regards
Robert Baldyga
Kamil Debski (2):
usb: dwc2/gadget: fix phy disable sequence
usb: dwc2/gadget: fix phy initialization sequence
Marek Szyprowski (3):
usb: dwc2/gadget: break infinite loop in
From: Kamil Debski k.deb...@samsung.com
When the driver is removed s3c_hsotg_phy_disable is called three times
instead of once. This results in decreasing of the phy reference counter
below zero and thus consecutive inserts of the module fails.
This patch removes calls to s3c_hsotg_phy_disable
From: Kamil Debski k.deb...@samsung.com
In the Generic PHY Framework a NULL phy is considered to be a valid phy
thus the if (hsotg-phy) check does not give us the information whether
the Generic PHY Framework is used.
In addition to the above this patch also removes phy_init from probe and
From: Marek Szyprowski m.szyprow...@samsung.com
This patch fixes possible freeze caused by infinite loop in interrupt
context.
Signed-off-by: Marek Szyprowski m.szyprow...@samsung.com
Signed-off-by: Robert Baldyga r.bald...@samsung.com
---
drivers/usb/dwc2/gadget.c | 1 +
1 file changed, 1
From: Marek Szyprowski m.szyprow...@samsung.com
This patch fixes kernel panic/interrupt storm/etc issues if bootloader
left s3c-hsotg module in enabled state. Now interrupt handler is enabled
only after proper configuration of hardware registers.
Signed-off-by: Marek Szyprowski
Endpoint 0 should not be disabled, so we start loop counter from number 1.
Signed-off-by: Robert Baldyga r.bald...@samsung.com
---
drivers/usb/dwc2/gadget.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/drivers/usb/dwc2/gadget.c b/drivers/usb/dwc2/gadget.c
index
From: Marek Szyprowski m.szyprow...@samsung.com
This leads to potential spinlock recursion in composite framework, other
udc drivers also don't call it directly from pullup method.
Signed-off-by: Marek Szyprowski m.szyprow...@samsung.com
Signed-off-by: Robert Baldyga r.bald...@samsung.com
---
From: Todd Poynor toddpoy...@google.com
usb: phy: Hold wakeupsource when USB is enumerated in peripheral mode
Purpose of this is to prevent the system to enter into suspend state from USB
peripheral traffic by hodling a wakeupsource when USB is connected and
enumerated in peripheral mode(say
From: Todd Poynor toddpoy...@google.com
usb: phy: Temporarily hold timed wakeup source on charger and disconnect
events
It temporarily holds a timed wakeup source on USB disconnect events, to allow
the rest of the system time to react to the USB disconnection (dropping host
sessions, updating
The kbuild test bot generated the warning:
drivers/usb/gadget/function/f_sourcesink.c:1498: warning: comparison is
always false due to limited range of data type
This patch fixes it.
Reported-by: kbuild test robot fengguang...@intel.com
Signed-off-by: Amit Virdi amit.vi...@st.com
Hello.
On 9/8/2014 2:10 PM, Kiran Kumar Raparthy wrote:
From: Todd Poynor toddpoy...@google.com
usb: phy: Temporarily hold timed wakeup source on charger and disconnect
events
No need to duplicate the summary.
It temporarily holds a timed wakeup source on USB disconnect events, to
On 08/28/2014 01:07 AM, Greg KH wrote:
On Wed, Aug 27, 2014 at 04:38:04PM -0500, Felipe Balbi wrote:
Commit 71c731a (usb: host: xhci: Fix Compliance Mode
on SN65LVP3502CP Hardware) implemented a workaround
for a known issue with Texas Instruments' USB 3.0
redriver IC but it left a condition
On Fri, Sep 05, 2014 at 06:17:57PM +0300, Octavian Purdila wrote:
This patch implements the USB part of the Diolan USB-I2C/SPI/GPIO
Master Adapter DLN-2. Details about the device can be found here:
https://www.diolan.com/i2c/i2c_interface.html.
Information about the USB protocol can be
This patch documents the device tree bindings required for the
ehci on-chip controller found in ST consumer electronics SoC's.
Signed-off-by: Peter Griffin peter.grif...@linaro.org
---
Documentation/devicetree/bindings/usb/ehci-st.txt | 39 +++
1 file changed, 39
This patch adds the ehci-st.c and ohci-st.c files for the usb 2.0
usb1.1 host controller drivers found on stih41x and stih4xx STMicroelectronics
SoC's into the STI arch section of the maintainers file.
Signed-off-by: Peter Griffin peter.grif...@linaro.org
---
MAINTAINERS | 2 ++
1 file changed,
Hi,
I believe all feedback has been incorporated, and this series has also been
rebased on
3.17-rc3.
It was re-worked from v2 onwards to split out the ehci and ohci parts
into their own drivers / devices like most other ARM platforms based on
feedback from Arnd Bergmann (see here
This patch adds the glue code required to ensure the on-chip OHCI
controller works on STi consumer electronics SoC's from STMicroelectronics.
It mainly manages the setting and enabling of the relevant clocks and manages
the reset / power signals to the IP block.
Signed-off-by: Peter Griffin
This patch documents the device tree bindings required for
the ohci on-chip controller found in ST consumer electronics SoC's.
Signed-off-by: Peter Griffin peter.grif...@linaro.org
---
Documentation/devicetree/bindings/usb/ohci-st.txt | 37 +++
1 file changed, 37
This patch adds the glue code required to ensure the on-chip EHCI
controller works on STi consumer electronics SoC's from STMicroelectronics.
It mainly manages the setting and enabling of the relevant clocks and manages
the reset / power signals to the IP block.
Signed-off-by: Peter Griffin
On Mon, Sep 08, 2014 at 01:32:33PM +0200, Johan Hovold wrote:
On Fri, Sep 05, 2014 at 06:17:57PM +0300, Octavian Purdila wrote:
+static int _dln2_transfer(struct dln2_dev *dln2, u16 handle, u16 cmd,
+ void *obuf, int obuf_len, void *ibuf, int *ibuf_len)
+{
snip
+
Sehr geehrte Begünstigte,
Sie haben als einzige Begünstigte der Summe von fünfhunderttausend Euro (€
500.000,00 Euro), die hier in WESTERN UNION OFFICE von der ONU Organisation für
Sie hinterlegt ausgewählt wurde.
Bitte kontaktieren Sie uns für Ansprüche Email: wes_sp...@outlook.com
Sehr geehrte Begünstigte,
Sie haben als einzige Begünstigte der Summe von fünfhunderttausend Euro (€
500.000,00 Euro), die hier in WESTERN UNION OFFICE von der ONU Organisation für
Sie hinterlegt ausgewählt wurde.
Bitte kontaktieren Sie uns für Ansprüche Email: wes_sp...@outlook.com
On Monday 08 September 2014 13:04:43 Peter Griffin wrote:
I believe all feedback has been incorporated, and this series has also been
rebased on
3.17-rc3.
It was re-worked from v2 onwards to split out the ehci and ohci parts
into their own drivers / devices like most other ARM platforms
On Mon, Sep 8, 2014 at 2:32 PM, Johan Hovold jo...@kernel.org wrote:
On Fri, Sep 05, 2014 at 06:17:57PM +0300, Octavian Purdila wrote:
This patch implements the USB part of the Diolan USB-I2C/SPI/GPIO
Master Adapter DLN-2. Details about the device can be found here:
snip
First of all,
On Mon, 08 Sep 2014, Octavian Purdila wrote:
On Mon, Sep 8, 2014 at 2:32 PM, Johan Hovold jo...@kernel.org wrote:
On Fri, Sep 05, 2014 at 06:17:57PM +0300, Octavian Purdila wrote:
This patch implements the USB part of the Diolan USB-I2C/SPI/GPIO
Master Adapter DLN-2. Details about the
On Sat, Sep 06, 2014 at 12:09:22AM +, Peter Chen wrote:
On Fri, Sep 05, 2014 at 08:44:08AM +0800, Peter Chen wrote:
On Thu, Sep 04, 2014 at 11:04:38AM -0400, Alan Stern wrote:
On Thu, 4 Sep 2014, Peter Chen wrote:
Hi Felipe Alan, how about using below steps for this
Hi,
On Mon, Sep 08, 2014 at 10:42:19AM +0200, Robert Baldyga wrote:
On 09/04/2014 09:49 PM, Felipe Balbi wrote:
Hi,
On Thu, Sep 04, 2014 at 07:37:20PM +, Paul Zimmerman wrote:
From: Felipe Balbi [mailto:ba...@ti.com]
Sent: Thursday, September 04, 2014 12:18 PM
On Thu, Sep 04,
Hi,
On Mon, Sep 08, 2014 at 09:30:27AM +0530, Pratyush Anand wrote:
On Fri, Sep 05, 2014 at 10:56:26PM +0800, Felipe Balbi wrote:
When we're debugging hard-to-reproduce and time-sensitive
use cases, printk() poses too much overhead. That's when
the kernel's tracing infrastructure comes
Hi,
On Mon, Sep 08, 2014 at 03:39:23PM +0530, Kiran Kumar Raparthy wrote:
From: Todd Poynor toddpoy...@google.com
usb: phy: Hold wakeupsource when USB is enumerated in peripheral mode
Purpose of this is to prevent the system to enter into suspend state from USB
peripheral traffic by
Hi,
On Mon, Sep 08, 2014 at 03:40:49PM +0530, Kiran Kumar Raparthy wrote:
From: Todd Poynor toddpoy...@google.com
usb: phy: Temporarily hold timed wakeup source on charger and disconnect
events
It temporarily holds a timed wakeup source on USB disconnect events, to allow
the rest of the
On Mon, Sep 08, 2014 at 11:45:27AM +0200, Robert Baldyga wrote:
From: Kamil Debski k.deb...@samsung.com
When the driver is removed s3c_hsotg_phy_disable is called three times
instead of once. This results in decreasing of the phy reference counter
below zero and thus consecutive inserts of
Hi,
On Mon, Sep 08, 2014 at 09:53:09AM +0530, Vivek Gautam wrote:
On Fri, Sep 5, 2014 at 11:26 PM, Felipe Balbi ba...@ti.com wrote:
On Thu, Sep 04, 2014 at 12:01:19PM +0530, Vivek Gautam wrote:
Don't we have phy_power_on()
for that ? It looks like you could just as well do this from
Hi,
On Mon, Sep 08, 2014 at 09:57:00AM +0200, Robert Baldyga wrote:
This patch introduces virtual endpoint address mapping. It separates
function logic form physical endpoint addresses making it more hardware
independent.
Following modifications changes user space API, so to enable them
On Mon, Sep 08, 2014 at 04:20:34PM +0300, Octavian Purdila wrote:
On Mon, Sep 8, 2014 at 2:32 PM, Johan Hovold jo...@kernel.org wrote:
+static bool find_free_slot(struct dln2_mod_rx_slots *rxs, int *slot)
+{
+ unsigned long flags;
+
+ spin_lock_irqsave(rxs-lock, flags);
On Mon, Sep 08, 2014 at 11:18:17AM +0300, Laurent Pinchart wrote:
From: Andrzej Pietrasiewicz andrze...@samsung.com
Prepare for separate compilation of uvc function's components.
Some symbols will have to be exported, so rename to avoid
conflicts with functions of the same name in host uvc.
Hi,
On Mon, Sep 08, 2014 at 04:05:33PM +0530, Amit Virdi wrote:
The kbuild test bot generated the warning:
drivers/usb/gadget/function/f_sourcesink.c:1498: warning: comparison is
always false due to limited range of data type
This patch fixes it.
Reported-by: kbuild test
Hi,
On Mon, Sep 08, 2014 at 07:48:06PM +0530, Kiran Raparthy wrote:
On 8 September 2014 19:08, Felipe Balbi ba...@ti.com wrote:
Hi,
On Mon, Sep 08, 2014 at 03:39:23PM +0530, Kiran Kumar Raparthy wrote:
From: Todd Poynor toddpoy...@google.com
usb: phy: Hold wakeupsource when USB
Hi Tony,
On Thursday 04 September 2014 10:37 PM, Tony Lindgren wrote:
* Kishon Vijay Abraham I kis...@ti.com [140904 06:51]:
Hi Tony,
On Thursday 28 August 2014 04:58 AM, Tony Lindgren wrote:
We don't need twl4030_phy_power() any longer now that we have
the runtime PM calls. Let's get rid
On Sun, 7 Sep 2014, Vincent Stehlé wrote:
Commit 6a04d05acfb51355 (USB: OHCI: fix bugs in debug routines) has removed
the unused `verbose' argument of the debug function ohci_dump(); adapt
ohci-spear accordingly.
This fixes the following compilation error:
On Fri, Sep 05, 2014 at 06:17:58PM +0300, Octavian Purdila wrote:
From: Laurentiu Palcu laurentiu.pa...@intel.com
This patch adds support for the Diolan DLN-2 I2C master module. Due
to hardware limitations it does not support SMBUS quick commands.
Information about the USB protocol
Hi Felipe,
W dniu 08.09.2014 o 15:51, Felipe Balbi pisze:
On Mon, Sep 08, 2014 at 11:18:17AM +0300, Laurent Pinchart wrote:
From: Andrzej Pietrasiewicz andrze...@samsung.com
Prepare for separate compilation of uvc function's components.
Some symbols will have to be exported, so rename to
On Mon, 8 Sep 2014, Oliver Neukum wrote:
On Fri, 2014-09-05 at 10:15 -0400, Alan Stern wrote:
On Fri, 5 Sep 2014, Oliver Neukum wrote:
Hi,
looking at your patch for resetting HID devices
it occurred to me that there's a race between
a queued reset and a port power switch.
HI,
On Mon, Sep 08, 2014 at 04:56:56PM +0200, Andrzej Pietrasiewicz wrote:
Hi Felipe,
W dniu 08.09.2014 o 15:51, Felipe Balbi pisze:
On Mon, Sep 08, 2014 at 11:18:17AM +0300, Laurent Pinchart wrote:
From: Andrzej Pietrasiewicz andrze...@samsung.com
Prepare for separate compilation of uvc
W dniu 08.09.2014 o 17:03, Felipe Balbi pisze:
HI,
snip
I think this series depends now on Michael's patch:
http://www.spinics.net/lists/linux-usb/msg111692.html
As far as I know Laurent already has it in his tree:
http://git.linuxtv.org/cgit.cgi/pinchartl/media.git/log/?h=uvc/gadget
I
On 2 September 2014 23:34, Andrew Bresticker abres...@chromium.org wrote:
Tested on Venice2, Jetson TK1, and Big with a variety of USB2.0 and
USB3.0 memory sticks and ethernet dongles using controller firmware
recently posted by Andrew Chew [2].
I have had mixed results when testing this on a
Sarah:
Thanks for the prompt response. It unfortunately confirmed what I expected our
situation to be.
I am intrigued by one aspect of your response -- that regarding the nature of
early xHCI driver operation with xHCI 1.0 integrated hosts such as those
produced by Intel. I am wondering in
On Mon, Sep 8, 2014 at 5:44 PM, Johan Hovold jo...@kernel.org wrote:
snip
Hi Johan,
Again, thanks for the detailed review, I am addressing your review
comments as we speak. Some questions below.
snip
+ int ret, len;
+ struct tx_data {
+ u8 port;
+ u8
Hello.
On 9/8/2014 2:55 PM, Kiran Raparthy wrote:
From: Todd Poynor toddpoy...@google.com mailto:toddpoy...@google.com
usb: phy: Temporarily hold timed wakeup source on charger and disconnect
events
No need to duplicate the summary.
It
On Mon, Sep 8, 2014 at 8:34 AM, Tomeu Vizoso to...@tomeuvizoso.net wrote:
On 2 September 2014 23:34, Andrew Bresticker abres...@chromium.org wrote:
Tested on Venice2, Jetson TK1, and Big with a variety of USB2.0 and
USB3.0 memory sticks and ethernet dongles using controller firmware
recently
Hi,
On Tue, 2 Sep 2014 13:30:31 -0400 (EDT)
Alan Stern st...@rowland.harvard.edu wrote:
Good, this is very clear. I'll skip to the interesting parts
8801355a29c0 1148408426 S Ci:004:00 s a1 fe 0001 1
8801355a29c0 1148410477 C Ci:004:00 0 1 = 10
This is the Get-Max-LUN
On Fri, Sep 05, 2014 at 06:17:59PM +0300, Octavian Purdila wrote:
From: Daniel Baluta daniel.bal...@intel.com
This patch adds GPIO and IRQ support for the Diolan DLN-2 GPIO module.
Information about the USB protocol interface can be found in the
Programmer's Reference Manual [1], see
On Mon, Sep 08, 2014 at 06:57:29PM +0300, Octavian Purdila wrote:
On Mon, Sep 8, 2014 at 5:44 PM, Johan Hovold jo...@kernel.org wrote:
snip
Hi Johan,
Again, thanks for the detailed review, I am addressing your review
comments as we speak. Some questions below.
snip
+ int
* Kishon Vijay Abraham I kis...@ti.com [140908 07:26]:
Hi Tony,
On Thursday 04 September 2014 10:37 PM, Tony Lindgren wrote:
* Kishon Vijay Abraham I kis...@ti.com [140904 06:51]:
Hi Tony,
On Thursday 28 August 2014 04:58 AM, Tony Lindgren wrote:
We don't need twl4030_phy_power() any
On Fri, Sep 05, 2014 at 06:17:59PM +0300, Octavian Purdila wrote:
--- /dev/null
+++ b/drivers/gpio/gpio-dln2.c
@@ -0,0 +1,537 @@
+/*
+ * Driver for the Diolan DLN-2 USB-GPIO adapter
+ *
+ * Copyright (c) 2014 Intel Corporation
+ *
+ * This program is free software; you can redistribute
Hi,
Running 3.16.1 on beaglebone black, I have the following issue with
musb_hdrc on boot:
[ 11.151063] Unable to handle kernel paging request at virtual
address e09bb05c
[ 11.158774] pgd = de5d8000
[ 11.161613] [e09bb05c] *pgd=9e02d811, *pte=, *ppte=
[ 11.168247]
On Mon, Sep 8, 2014 at 7:30 PM, Johan Hovold jo...@kernel.org wrote:
On Mon, Sep 08, 2014 at 06:57:29PM +0300, Octavian Purdila wrote:
On Mon, Sep 8, 2014 at 5:44 PM, Johan Hovold jo...@kernel.org wrote:
snip
Hi Johan,
Again, thanks for the detailed review, I am addressing your review
On Mon, Sep 08, 2014 at 08:41:28AM -0500, Felipe Balbi wrote:
On Mon, Sep 08, 2014 at 11:45:27AM +0200, Robert Baldyga wrote:
From: Kamil Debski k.deb...@samsung.com
When the driver is removed s3c_hsotg_phy_disable is called three times
instead of once. This results in decreasing of the
On Mon, Sep 08, 2014 at 08:15:07PM +0300, Octavian Purdila wrote:
Just one more question on this subject: is the following allowed:
int ret, len;
or should it be:
int ret;
int len;
I try to avoid it, at least unless obviously related such as min/max or
x/y.
Johan
--
To unsubscribe
Hi Greg,
Am Freitag, 8. August 2014, 11:55:55 schrieb Kever Yang:
These patches to add support for dwc2 controller found in
Rockchip processors rk3066, rk3188 and rk3288,
and enable dts for rk3288 evb.
will you take patches 1 and 2?
Thanks
Heiko
Changes in v5:
- max_transfer_size
Greg,
On Thu, Aug 7, 2014 at 1:18 PM, Paul Zimmerman
paul.zimmer...@synopsys.com wrote:
From: Doug Anderson [mailto:diand...@chromium.org]
Sent: Thursday, August 07, 2014 12:48 PM
The documentation for GNPTXFSIZ says that For host mode, this field
is always valid. Since we're already
Hi,
it kinda helps if you Cc the maintainer :-) scripts/get_maintainer.pl
helps by returning a (usually) correct (and extensive) list of people
and mailing lists to Cc :-)
anyway...
On Mon, Sep 08, 2014 at 09:08:07PM +0400, Matwey V. Kornilov wrote:
Hi,
Running 3.16.1 on beaglebone black, I
On Mon, 8 Sep 2014, Mark wrote:
Thanks very much for that! I booted with usb-storage.quirks=059b:0040:s to
enable the single-LUN quirk. No change in dmesg output on connecting the
drive/cable. I also compiled the kernel to add both US_FL_SINGLE_LUN and
US_FL_BULK_IGNORE_TAG quirks. [For that
Hi,
On Mon, Sep 08, 2014 at 05:16:04PM +0200, Andrzej Pietrasiewicz wrote:
W dniu 08.09.2014 o 17:03, Felipe Balbi pisze:
HI,
snip
I think this series depends now on Michael's patch:
http://www.spinics.net/lists/linux-usb/msg111692.html
As far as I know Laurent already has it in
Each core could have more than one alternative address. There are cores
with 8 alternative addresses for different functions. The PHY control
in the Chip common B core is done through the 2. alternative address
and not the first one.
Signed-off-by: Hauke Mehrtens ha...@hauke-m.de
CC:
On Thu, Sep 04, 2014 at 12:04:22PM -0700, Paul Zimmerman wrote:
From: Robert Baldyga r.bald...@samsung.com
I'm resending this patchset rebased on linux-next. Now it should apply.
I'm lost, it seems some of these should be for 3.17-final and some for
3.18, can you please split this up into 2
On Tue, Aug 26, 2014 at 11:19:54AM -0500, dingu...@opensource.altera.com wrote:
From: Dinh Nguyen dingu...@opensource.altera.com
Adds the gadget data structure and appropriate data structure pointers
to the common dwc2_hsotg data structure. To keep the driver data
dereference code looking
From: Greg KH [mailto:gre...@linuxfoundation.org]
Sent: Monday, September 08, 2014 3:49 PM
On Thu, Sep 04, 2014 at 12:04:22PM -0700, Paul Zimmerman wrote:
From: Robert Baldyga r.bald...@samsung.com
I'm resending this patchset rebased on linux-next. Now it should apply.
I'm lost, it
On Mon, Sep 08, 2014 at 10:52:06PM +, Paul Zimmerman wrote:
From: Greg KH [mailto:gre...@linuxfoundation.org]
Sent: Monday, September 08, 2014 3:49 PM
On Thu, Sep 04, 2014 at 12:04:22PM -0700, Paul Zimmerman wrote:
From: Robert Baldyga r.bald...@samsung.com
I'm resending this
From: Andrzej Pietrasiewicz andrze...@samsung.com
There are no users of the old interface left. Remove it.
Signed-off-by: Andrzej Pietrasiewicz andrze...@samsung.com
Tested-by: Michael Grzeschik m.grzesc...@pengutronix.de
Signed-off-by: Laurent Pinchart laurent.pinch...@ideasonboard.com
---
From: Andrzej Pietrasiewicz andrze...@samsung.com
Compile uvc_queue, uvc_v4l2, uvc_video separately so that later they can
be all combined in a separately compiled f_uvc.
Signed-off-by: Andrzej Pietrasiewicz andrze...@samsung.com
Tested-by: Michael Grzeschik m.grzesc...@pengutronix.de
[Make
From: Andrzej Pietrasiewicz andrze...@samsung.com
Use the new function interface of f_uvc.
Signed-off-by: Andrzej Pietrasiewicz andrze...@samsung.com
Tested-by: Michael Grzeschik m.grzesc...@pengutronix.de
Signed-off-by: Laurent Pinchart laurent.pinch...@ideasonboard.com
---
From: Andrzej Pietrasiewicz andrze...@samsung.com
Attach strings to gadget with usb_strings_attach.
It is required for correct instantiation of functions more than once:
instead of modifying the local uvc_en_us_strings a function instance
specific copy is created with usb_gstrings_attach.
From: Andrzej Pietrasiewicz andrze...@samsung.com
Prepare for separate compilation of uvc function's components.
Some symbols will have to be exported, so rename to avoid
conflicts with functions of the same name in host uvc.
Signed-off-by: Andrzej Pietrasiewicz andrze...@samsung.com
Tested-by:
Hi Felipe,
These patches have previously been posted to linux-usb as part of the
[PATCH v2 0/9] UVC gadget patches for v3.18 (part 2) series.
I've rebased them on top of your next branch and dropped the ones that
have already been applied. Could you please apply them to your tree for
v3.18 ?
From: Andrzej Pietrasiewicz andrze...@samsung.com
Use the new function registration interface. It is required
in order to integrate configfs support.
Signed-off-by: Andrzej Pietrasiewicz andrze...@samsung.com
Tested-by: Michael Grzeschik m.grzesc...@pengutronix.de
[Updated copyright years]
From: Greg KH [mailto:gre...@linuxfoundation.org]
Sent: Monday, September 08, 2014 4:01 PM
On Mon, Sep 08, 2014 at 10:52:06PM +, Paul Zimmerman wrote:
From: Greg KH [mailto:gre...@linuxfoundation.org]
Sent: Monday, September 08, 2014 3:49 PM
On Thu, Sep 04, 2014 at 12:04:22PM
Add reset API at usb_gadget_driver, it calls disconnect handler currently,
but may do different things in future.
Signed-off-by: Peter Chen peter.c...@freescale.com
---
drivers/usb/gadget/configfs.c |1 +
1 file changed, 1 insertion(+)
diff --git a/drivers/usb/gadget/configfs.c
Add reset API at usb_gadget_driver, it calls disconnect handler currently,
but may do different things in future.
Signed-off-by: Peter Chen peter.c...@freescale.com
---
drivers/usb/gadget/legacy/dbgp.c |1 +
1 file changed, 1 insertion(+)
diff --git a/drivers/usb/gadget/legacy/dbgp.c
Adding reset API for UDC bus reset handler is useful for below
two issues.
Current disconnect API at usb_gadget_driver is also invoked at
udc's bus reset handler, but the document says it is invoked when
the host is disconnected.
Besides, we may expect the gadget_driver to do different things
Add reset API at usb_gadget_driver, it calls disconnect handler currently,
but may do different things in future.
Signed-off-by: Peter Chen peter.c...@freescale.com
---
drivers/usb/gadget/legacy/inode.c |1 +
1 file changed, 1 insertion(+)
diff --git a/drivers/usb/gadget/legacy/inode.c
Add reset API at usb_gadget_driver, it calls disconnect handler currently,
but may do different things in future.
Signed-off-by: Peter Chen peter.c...@freescale.com
---
drivers/usb/gadget/composite.c |1 +
1 file changed, 1 insertion(+)
diff --git a/drivers/usb/gadget/composite.c
Hi Felipe Alan,
It is the first step for our discussion for adding reset,
vbus, activation handler for udc framework. This patchset
just adds .reset API at usb_gadget_driver, and the four
gadget drivers still call disconnect handler at .reset.
Peter Chen (5):
usb: gadget: add reset API at
Hi,
On Mon, Sep 8, 2014 at 7:14 PM, Felipe Balbi ba...@ti.com wrote:
Hi,
On Mon, Sep 08, 2014 at 09:53:09AM +0530, Vivek Gautam wrote:
On Fri, Sep 5, 2014 at 11:26 PM, Felipe Balbi ba...@ti.com wrote:
On Thu, Sep 04, 2014 at 12:01:19PM +0530, Vivek Gautam wrote:
Don't we have
please split this patch. First add udc-gpio and fix all the gpio
details, then add devicetree.
Anything else for the serie ?
--
Robert
--
To unsubscribe from this list: send the line unsubscribe linux-usb in
the body of a message to majord...@vger.kernel.org
More majordomo info at
On Mon, Sep 08, 2014 at 09:35:33PM +0800, Felipe Balbi wrote:
Hi,
On Mon, Sep 08, 2014 at 09:30:27AM +0530, Pratyush Anand wrote:
On Fri, Sep 05, 2014 at 10:56:26PM +0800, Felipe Balbi wrote:
When we're debugging hard-to-reproduce and time-sensitive
use cases, printk() poses too much
1 - 100 of 101 matches
Mail list logo