On Mon, Jul 18, 2016 at 10:07:24AM +0300, Felipe Balbi wrote:
>
> Hi,
>
> Bin Gao writes:
> >> > +int pd_sink_queue_msg(struct pd_sink_msg *msg)
> >> > +{
> >> > +unsigned long flags;
> >> > +struct pd_sink_port *port;
> >> > +
> >> > +if
On Sat, Jul 16, 2016 at 08:49:53AM +0900, Greg Kroah-Hartman wrote:
> On Fri, Jul 15, 2016 at 03:41:10PM -0700, Bin Gao wrote:
> > On Fri, Jul 15, 2016 at 02:21:48PM +0300, Felipe Balbi wrote:
> > > Greg Kroah-Hartman writes:
> > > > On Fri, Jul 15, 2016 at 01:38:12PM
Hi
> -Original Message-
> From: Peter Chen [mailto:hzpeterc...@gmail.com]
> Sent: Tuesday, July 19, 2016 9:57 AM
> To: Jun Li
> Cc: Peter Chen ; robh...@kernel.org;
> shawn...@kernel.org; devicet...@vger.kernel.org; linux-usb@vger.kernel.org;
>
On Tue, Jul 19, 2016 at 02:31:41AM +, Jun Li wrote:
> Hi
>
> > -Original Message-
> > From: Peter Chen [mailto:hzpeterc...@gmail.com]
> > Sent: Tuesday, July 19, 2016 9:57 AM
> > To: Jun Li
> > Cc: Peter Chen ; robh...@kernel.org;
> >
On Mon, Jul 18, 2016 at 07:15:47PM +0800, Li Jun wrote:
> With over-current-polarity property added, imx usb over current
> polarity can be configed to be low or high active, since the default
> setting value(0) is for active high, so keep this setting for those
> legacy platforms without this
On Mon, Jul 18, 2016 at 08:24:50AM -0700, Joshua Clayton wrote:
> Greetings,
> On 07/18/2016 04:15 AM, Li Jun wrote:
> > Adding over-current-polarity to indicate the over current flag
> > is low active or high active.
> >
> > Signed-off-by: Li Jun
> > ---
> >
On Mon, 18 Jul 2016, Bruce Korb wrote:
> On Mon, Jul 18, 2016 at 2:24 PM, Alan Stern wrote:
> > This is not surprising, because the problem probably stems from the
> > xHCI host controller in your computer, not from the hub.
>
> Gigabyte is supposed to make reliable
On Mon, Jul 18, 2016 at 2:24 PM, Alan Stern wrote:
> This is not surprising, because the problem probably stems from the
> xHCI host controller in your computer, not from the hub.
Gigabyte is supposed to make reliable motherboards.
Haven't been trying to use USB3 until
On Mon, 18 Jul 2016, Bruce Korb wrote:
> On Sun, Jul 17, 2016 at 12:43 PM, Alan Stern
> wrote:
> > A USB-3.1 device should work okay with a USB-3 driver. However, it
> > would help if you upgrade to the latest available kernel version.
>
> It is the latest available
Set OTG2 over current flag to be active low, OTG1 OC is not used
by default.
Signed-off-by: Li Jun
---
arch/arm/boot/dts/imx7d-sdb.dts | 8
1 file changed, 8 insertions(+)
diff --git a/arch/arm/boot/dts/imx7d-sdb.dts b/arch/arm/boot/dts/imx7d-sdb.dts
index
On Sun, Jul 17, 2016 at 12:43 PM, Alan Stern wrote:
> A USB-3.1 device should work okay with a USB-3 driver. However, it
> would help if you upgrade to the latest available kernel version.
It is the latest available openSUSE release.
I've downloaded the latest
Greetings,
On 07/18/2016 04:15 AM, Li Jun wrote:
> Adding over-current-polarity to indicate the over current flag
> is low active or high active.
>
> Signed-off-by: Li Jun
> ---
> Documentation/devicetree/bindings/usb/ci-hdrc-usb2.txt | 2 ++
> 1 file changed, 2 insertions(+)
>
>
On Mon, Jul 18, 2016 at 4:14 PM, Oliver Neukum wrote:
>> Ok, sounds good. So far, I have only seen the random MAC issue with
>> the three previously mentioned devices, but who knows how many else is
>> out there with the same error ... I don't think it should be in the
>> core
On Mon, Jul 18, 2016 at 4:14 PM, Oliver Neukum wrote:
>> Ok, sounds good. So far, I have only seen the random MAC issue with
>> the three previously mentioned devices, but who knows how many else is
>> out there with the same error ... I don't think it should be in the
>> core
On Mon, 2016-07-18 at 16:10 +0200, Kristian Evensen wrote:
> On Mon, Jul 18, 2016 at 3:50 PM, Oliver Neukum wrote:
> > No, you misunderstand me. I don't want quirks if we can avoid it.
> > But if you need to do this for rndis_host and cdc_ether and maybe other
> > drivers you
On Mon, Jul 18, 2016 at 3:50 PM, Oliver Neukum wrote:
> No, you misunderstand me. I don't want quirks if we can avoid it.
> But if you need to do this for rndis_host and cdc_ether and maybe other
> drivers you should not be touching drivers. This belongs into the core
> ethernet
On Mon, 2016-07-18 at 15:23 +0200, Kristian Evensen wrote:
> Hi,
>
> On Mon, Jul 18, 2016 at 3:01 PM, Oliver Neukum wrote:
> > On Mon, 2016-07-18 at 14:24 +0200, Kristian Evensen wrote:
> >> The firmware in the ZTE MF823/831/910 modems/mifis use OS fingerprinting to
> >>
Adding over-current-polarity to indicate the over current flag
is low active or high active.
Signed-off-by: Li Jun
---
Documentation/devicetree/bindings/usb/ci-hdrc-usb2.txt | 2 ++
1 file changed, 2 insertions(+)
diff --git
Hi,
On Mon, Jul 18, 2016 at 3:01 PM, Oliver Neukum wrote:
> On Mon, 2016-07-18 at 14:24 +0200, Kristian Evensen wrote:
>> The firmware in the ZTE MF823/831/910 modems/mifis use OS fingerprinting to
>> determine which type of device to export. In addition, these devices export
On Mon, 2016-07-18 at 14:24 +0200, Kristian Evensen wrote:
> The firmware in the ZTE MF823/831/910 modems/mifis use OS fingerprinting to
> determine which type of device to export. In addition, these devices export
> a REST API which can also be used to control the type of device. So far, on
>
Hello there,
drivers/usb/usbip/vudc_rx.c:145:27: warning: result of ‘11 << 30’
requires 35 bits to represent, but ‘int’ only has 32 bits
[-Wshift-overflow=]
Source code is
urb_p->urb->pipe &= ~(11 << 30);
Maybe better code
urb_p->urb->pipe &= ~(11UL << 30);
Regards
David Binderman
The firmware in the ZTE MF823/831/910 modems/mifis use OS fingerprinting to
determine which type of device to export. In addition, these devices export
a REST API which can also be used to control the type of device. So far, on
Linux, the devices have been seen as RNDIS or CDC Ether.
When CDC
With over-current-polarity property added, imx usb over current
polarity can be configed to be low or high active, since the default
setting value(0) is for active high, so keep this setting for those
legacy platforms without this property specified.
Signed-off-by: Li Jun
---
Hi Frank,
Am Montag, 18. Juli 2016, 18:02:28 schrieb Frank Wang:
> On 2016/6/25 3:58, Heiko Stuebner wrote:
> > Am Dienstag, 21. Juni 2016, 18:30:05 schrieb Frank Wang:
> >> The newer SoCs (rk3366, rk3399) take a different usb-phy IP block
> >> than rk3288 and before, and most of phy-related
Add compatible string for imx7d-usbmisc.
Signed-off-by: Li Jun
---
Documentation/devicetree/bindings/usb/usbmisc-imx.txt | 1 +
1 file changed, 1 insertion(+)
diff --git a/Documentation/devicetree/bindings/usb/usbmisc-imx.txt
Hi Peter,
> -Original Message-
> From: Peter Chen [mailto:hzpeterc...@gmail.com]
> Sent: Friday, July 15, 2016 5:21 PM
> To: Jun Li
> Cc: Peter Chen ; linux-usb@vger.kernel.org
> Subject: Re: [PATCH 2/2] usb: chipidea: usbmisc: set over current
Hi Heiko,
On 2016/6/25 3:58, Heiko Stuebner wrote:
Am Dienstag, 21. Juni 2016, 18:30:05 schrieb Frank Wang:
The newer SoCs (rk3366, rk3399) take a different usb-phy IP block
than rk3288 and before, and most of phy-related registers are also
different from the past, so a new phy driver is
On Mon, Jul 18, 2016 at 07:04:57AM +, Jun Li wrote:
> Hi Peter,
>
> > -Original Message-
> > From: Peter Chen [mailto:hzpeterc...@gmail.com]
> > Sent: Friday, July 15, 2016 5:21 PM
> > To: Jun Li
> > Cc: Peter Chen ; linux-usb@vger.kernel.org
> >
Hi,
Bin Gao writes:
>> > +int pd_sink_queue_msg(struct pd_sink_msg *msg)
>> > +{
>> > + unsigned long flags;
>> > + struct pd_sink_port *port;
>> > +
>> > + if (msg->port < 0 || msg->port >= MAX_NR_SINK_PORTS) {
>> > + pr_err("Invalid port number\n");
>> > +
On 18 July 2016 at 07:53, Peter Chen wrote:
> On Mon, Jul 18, 2016 at 07:57:34AM +0200, Rafał Miłecki wrote:
>> On 18 July 2016 at 07:40, Peter Chen wrote:
>> > On Mon, Jul 18, 2016 at 06:44:49AM +0200, Rafał Miłecki wrote:
>> >> On 18 July 2016 at
On Mon, Jul 18, 2016 at 07:57:34AM +0200, Rafał Miłecki wrote:
> On 18 July 2016 at 07:40, Peter Chen wrote:
> > On Mon, Jul 18, 2016 at 06:44:49AM +0200, Rafał Miłecki wrote:
> >> On 18 July 2016 at 04:31, Peter Chen wrote:
> >> > On Fri, Jul 15,
31 matches
Mail list logo