Changing the frequency of the USB clock must be done before the
PLL is powered on (prepared). This matters when the USB clock
is not setup by either boot ROM or boot loader. Reorder the
function calls to adhere to the order noted in the user manual.
Signed-off-by: Joachim Eastwood manab
On 15 July 2015 at 12:50, Kishon Vijay Abraham I kis...@ti.com wrote:
On Friday 10 July 2015 02:18 AM, Joachim Eastwood wrote:
This patch set adds support for the internal USB OTG PHY found
on NXP LPC18xx and LPC43xx devices. Driver takes care of
enabling the PHY and setting the clock rate
Add PHY driver for the internal USB OTG PHY found on NXP
LPC18xx and LPC43xx devices. This driver takes care of
enabling the PHY in CREG (syscon) and setting the required
clock frequency.
Signed-off-by: Joachim Eastwood manab...@gmail.com
---
drivers/phy/Kconfig | 11 +++
drivers
Add binding documentation for NXP LPC18xx/43xx USB OTG PHY. This
PHY can found on NXP LPC18xx and LPC43xx devices with USB support.
Signed-off-by: Joachim Eastwood manab...@gmail.com
---
.../bindings/phy/phy-lpc18xx-usb-otg.txt | 26 ++
1 file changed, 26 insertions
set on 4.2-rc1.
Changes in v4:
- rebase on 4.2-rc1
- move dt node under creg where the control reg is
Changes in v3:
- depend on MFD_SYSCON
Changes in v2:
- use PTR_ERR_OR_ZERO in phy driver
- rename binding doc
- update doc commit message
Joachim Eastwood (2):
phy: add lpc18xx usb otg
.
There are also some other code that uses the variables that can be
dropped. Should shave another 22 lines of code off atmel_serial.c
I can send out a patch on top of yours if you prefer that.
regards
Joachim Eastwood
--
To unsubscribe from this list: send the line unsubscribe linux-usb in
the body
since it
all mach includes has already been removed by other patches and it
includes linux/platform_data/macb.h directly.
What tree was these patches based on?
The at91_ether driver changes has been in linux-next for a long while now.
regards
Joachim Eastwood
--
To unsubscribe from this list
fixed the issue by adding the gpio valid check.
Signed-off-by: Joachim Eastwood joachim.eastw...@jotron.com
---
Note: If 6fffb77c goes into stable please either include this patch also or
fold it into 6fffb77c to avoid regressions.
drivers/usb/host/ohci-at91.c | 3 ++-
1 file changed, 2 insertions
a custom board with AT91RM9200 and 1 USB host port.
regards
Joachim Eastwood
--
To unsubscribe from this list: send the line unsubscribe linux-usb in
the body of a message to majord...@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
