Hi Zhengjun,
On Wed, 16 May 2018 14:55:55 +0300, Mathias Nyman wrote:
> On 15.05.2018 12:22, Michael Tretter wrote:
> > Hi Mathias,
> >
> > On Tue, 10 Apr 2018 18:22:03 +0300, Mathias Nyman wrote:
> >> On 09.04.2018 11:21, Michael Tretter wrote:
> >&
Hi Mathias,
On Tue, 10 Apr 2018 18:22:03 +0300, Mathias Nyman wrote:
> On 09.04.2018 11:21, Michael Tretter wrote:
> > On Tue, 20 Feb 2018 15:29:28 +0200, Mathias Nyman wrote:
> >> On 16.02.2018 15:28, Michael Tretter wrote:
> >>> On Mon, 29 Jan 2018 14:02
On Tue, 20 Feb 2018 15:29:28 +0200, Mathias Nyman wrote:
> On 16.02.2018 15:28, Michael Tretter wrote:
> > On Mon, 29 Jan 2018 14:02:57 +0200, Mathias Nyman wrote:
> >> On 19.01.2018 22:12, Philipp Zabel wrote:
> >>> On Fri, Jan 19, 2018 at 2:10 PM, Michael Tr
Hi Mathias,
On Tue, 20 Feb 2018 15:29:28 +0200, Mathias Nyman wrote:
> On 16.02.2018 15:28, Michael Tretter wrote:
> > Hi Mathias,
> >
> > On Mon, 29 Jan 2018 14:02:57 +0200, Mathias Nyman wrote:
> >> On 19.01.2018 22:12, Philipp Zabel wrote:
> >>>
Hi Mathias,
On Mon, 29 Jan 2018 14:02:57 +0200, Mathias Nyman wrote:
> On 19.01.2018 22:12, Philipp Zabel wrote:
> > Hi,
> >
> > On Fri, Jan 19, 2018 at 2:10 PM, Michael Tretter
> > wrote:
> >> I found the old thread and it sounds exactly like my issue.
On Thu, 18 Jan 2018 17:53:24 +0200, Mathias Nyman wrote:
> On 17.01.2018 18:46, Michael Tretter wrote:
> > Hello,
> >
> > I am using a Magewell XI100DUSB-HDMI frame grabber which by itself works
> > fine. However, I get a "Not enough bandwidth for new device sta
If the xHC detects an oversubscription of bandwidth, it send a Bandwidth
Error completion code in the Command Completion event. The Get Port
Bandwidth command can be used to show the available bandwidth of each
root hub port of the xHC.
Signed-off-by: Michael Tretter
---
drivers/usb/host/xhci
Hello,
I am using a Magewell XI100DUSB-HDMI frame grabber which by itself works
fine. However, I get a "Not enough bandwidth for new device state."
error for any other USB device that is plugged after the frame grabber.
This error is caused by the xHC sending a Bandwidth Error for
the Configure En