Found the solution!
Changing BIOS settings to the values on the screenshots above made the trick!
Supermicro X9SRI-F now works with PCI-E USB 3.0 card on x86_64 linux
when i disable IOMMU -> "Enable Intel DMA Remapping Device by default"
the USB flash drive becomes completely invisible.
Same stuff when i completely disable recompile kernel without IOMMU
2017-02-19 6:48 GMT+03:00 c400 <c400c...@gmail.com>:
> [ 804.441424] usb 4-1: new
16000 microseconds.
2017-02-11 16:32 GMT+03:00 c400 <c400c...@gmail.com>:
> no, i`ve already tested and wrote about useless experiments
> https://www.mail-archive.com/linux-usb@vger.kernel.org/msg80329.html
>
> 2017-02-11 0:45 GMT+03:00 c400 <c400c...@gmail.com>:
>>
no, i`ve already tested and wrote about useless experiments
https://www.mail-archive.com/linux-usb@vger.kernel.org/msg80329.html
2017-02-11 0:45 GMT+03:00 c400 <c400c...@gmail.com>:
> sorry, got the letter branch cleaned, so haven`t seen your reply
>
> tested on 4.9.9 kernel
>
&
sorry, got the letter branch cleaned, so haven`t seen your reply
tested on 4.9.9 kernel
[13964.125187] sd 7:0:0:0: [sdc] Attached SCSI removable disk
[13964.150525] DMAR: DRHD: handling fault status reg 2
[13964.150532] DMAR: [DMA Read] Request device [02:00.0] fault addr
fffb1000 [fault reason
tested this controller on the this and other PC with linux x86_32 and
windows, everything works ok
btw i have 2 similar controllers and the same problems
2017-01-14 16:53 GMT+03:00 c400 <c400c...@gmail.com>:
> a262eb551300 320471228 S Ci:4:001:0 s a3 00 0001 0004 4 <
> f
a262eb551300 320471228 S Ci:4:001:0 s a3 00 0001 0004 4 <
a262eb551300 320471237 C Ci:4:001:0 0 4 = 03020100
a262eb551300 320471240 S Co:4:001:0 s 23 01 0010 0001 0
a262eb551300 320471242 C Co:4:001:0 0 0
a262eb551300 320471244 S Ci:4:001:0 s a3 00 0002 0004 4 <
:02:00.0: HC died; cleaning up
[ 282.025108] usb 3-1: USB disconnect, device number 2
2017-01-10 13:06 GMT+03:00 c400 <c400c...@gmail.com>:
> hi!
> Using 4.9.2 kernel. Still no success with VL805 USB 3.0
> i can give a remote shell to test and reproduce the bug
>
> any help?
&g
hi!
Using 4.9.2 kernel. Still no success with VL805 USB 3.0
i can give a remote shell to test and reproduce the bug
any help?
2016-09-23 0:47 GMT+03:00 c400 <c400c...@gmail.com>:
> btw
> i've tested a liitle better and the disk is visible, but write errors occurs
> after ejectin
[129530.540108] device: '2-1-port4': device_unregister
[129530.540116] PM: Removing info for No Bus:2-1-port4
2016-09-21 18:08 GMT+03:00 c400 <c400c...@gmail.com>:
> 02:00.0 USB controller: VIA Technologies, Inc. VL805 USB 3.0 Host
> Controller (rev 01) (prog-if 30 [XHCI])
>
02:00.0 USB controller: VIA Technologies, Inc. VL805 USB 3.0 Host
Controller (rev 01) (prog-if 30 [XHCI])
Subsystem: VIA Technologies, Inc. VL805 USB 3.0 Host Controller
Flags: bus master, fast devsel, latency 0, IRQ 41
Memory at fbb0 (64-bit, non-prefetchable)
roger that
i`ll test it and write back after weekends
2016-09-15 17:29 GMT+03:00 c400 <c400c...@gmail.com>:
>>Obviously you're not reading my email messages. I told you quite
>>clearly:
>>
>>After unloading the xhci-pci and xhci-hcd modules:
>>
>
part of commands from your message were done right as you`ve sent
i thought you`ve seen the result in DMESG (i`ve sent it twice)
i even tried rmmod previously
USB does not work either
2016-09-15 0:45 GMT+03:00 c400 <c400c...@gmail.com>:
> XHCI_NO_64BIT_SUPPORT
> can't find such flag in
XHCI_NO_64BIT_SUPPORT
can't find such flag in my kernel config. May be you can help me to
find it in menuconfig tree?
2016-09-14 23:25 GMT+03:00 c400 <c400c...@gmail.com>:
> yep! enabling You need to enable CONFIG_DYNAMIC_DEBUG. did the trick!
> here is my new dmesg output:
>
>
2016-09-14 15:43 GMT+03:00 Oliver Neukum <oneu...@suse.com>:
> On Wed, 2016-09-14 at 15:22 +0300, c400 wrote:
>> may be i can help to test something else? I am ready and have enough free
>> time
>
> You may need to mount debugfs at /sys/kernel/debug
>
>
may be i can help to test something else? I am ready and have enough free time
2016-09-12 20:44 GMT+03:00 c400 <c400c...@gmail.com>:
> [182047.000570] xhci_hcd :02:00.0: remove, state 4
> [182047.000577] usb usb4: USB disconnect, device number 1
> [182047.023980] xhci_hcd 000
[182047.000570] xhci_hcd :02:00.0: remove, state 4
[182047.000577] usb usb4: USB disconnect, device number 1
[182047.023980] xhci_hcd :02:00.0: Host not halted after 16000 microseconds.
[182047.023982] xhci_hcd :02:00.0: Host controller not halted,
aborting reset.
[182047.023996]
my DMESG file
[0.00] Linux version 4.7.3-gentoo (root@ss) (gcc version 4.9.3 (Gentoo
4.9.3 p1.5, pie-0.6.4) ) #1 SMP Sat Sep 10 09:38:53 Local time zone must be
set--see zic
[0.00] Command line:
BOOT_IMAGE=/boot/kernel-genkernel-x86_64-4.7.3-gentoo
i`ve got two PCI-E USB controller: VIA Technologies, Inc. VL805 USB
3.0 Host Controller (rev 01)
The problem is that both of them works on ASUS P8H61-MX R 2.0 with x86
and x86_64 kernels
but on my Supermicro X9SRI-F both of them works only on x86 kernel.
Tried with vanilla gentoo install and
19 matches
Mail list logo
