[linux-usb-devel] Usage of IDE-USB-Adapters on ASUS K8V SE Deluxe with an 80GB IDE Disk (Vanilla Kernel 2.6.10)

Hi, I'm running FC3, and I have an ASUS K8V SE Deluxe MB, and I attached an 80GB Samsung IDE Disk via an IDE-USB-Adapator at the front usb connector. Problem: Partitioning the DISK by cfdisk is OK (1 primary, spanning over the whole disk). But formatting with etx2/ext3 or xfs hangs up, after abou

Re: [linux-usb-devel] 2.6.11-rc3-bk5, oops in scsi_try_bus_reset

On Thu, Feb 10, Alan Stern wrote: > And Mike Anderson's response was > > http://marc.theaimsgroup.com/?l=linux-scsi&m=110538854224319&w=2 > > His explanation was "Currently scsi_host_cancel being called from > scsi_remove_host appears to not do anything as scsi_forget_host removes > the devices

[linux-usb-devel] Usage of IDE-USB-Adapters on ASUS K8V SE Deluxe with an 80GB IDE Disk on Fedora Core3

Hi, I'm running FC3, and I have an ASUS K8V SE Deluxe MB, and I attached an 80GB Samsung IDE Disk via an IDE-USB-Adapator at the front usb connector. Problem: Partitioning the DISK by cfdisk is OK (1 primary, spanning over the whole disk). But formatting with etx2/ext3/xfs hangs up, after about o

[linux-usb-devel] usbnet ax8817x recv performance patch

I've observed poor receive performance in 100baseTx-FD mode from ax8817x devices in all versions of usbnet.c. Half-duplex received performance is actually better than full duplex. After some investigation, I found that the MEDIUM_MODE wasn't being written, and this seems to affect "Pause fram

[linux-usb-devel] Single Port Serial USB SERIAL

Hi All, I'm tryig to make some hardware using the USB FTDI Single Port Serial for the FT245BM USB chip. The default redhat/fedora 2.4 and 2.6 kernels detect the device fine and I can see the USB device. I can also send data to the chip and see the output on LEDs. I use this command to send

[linux-usb-devel] Re:

Вы решили увеличить количество клиентов со следующего месяца? Вы хотите прорекламировать новую услугу или продукт Вашей компании? Хотите чтобы к Вам пришли новые покупатели? И не знаете как это можно сделать качественно, быстро и не дорого? Тогда закажите рекламу в интернете. Рассылку по

[linux-usb-devel] unable detect the mass storage device

hi all, I am doing my academic project on embedded systems. I am having a board having PXA255 processor and ISP1582 philips usb chip and i am porting linux2.6.9 into the board. I have written the class driver for usb mass storage ie hardisk(ATA).After inserting the driver modules when i con