s for 2.6.12rc2 and can communicate with the host no problem.
But, does not work for 2.6.12 released version. i patched the
difference between the 2 kernels but, i get the same problem.
I am using OMAP 5912 OSK board and want it to function as an USB
ethernet gadget.
please advice.
Regards
I tried all the suggestions and does not work for me.
I dont know what the problem is.
I tried Linux 2.6.12rc2 it worked. Linux 2.6.12 does not work.
I tried patcing the differences on Linux 2.6.12 from Linux 2.6.12 rc2
and it did not work.
Any help is appreciated.
Regards,
Ram
On 7/11
Hi,
When i connect my device (ethernet gadget) into the host. i get the message
I am able to assign ip address to usb0 at the device side.
i can see usb0 if i do on the device side.
But, on the host side. i get the following error.
I have modprobe'd usbnet driver and can see it when i do ls
I can do ifconfig usb0 and assign an address to my usb0.
But, why the device addess given by the host is not being accepted by my gadget.
Please Advice.
Regards,
Ram
On 7/10/05, Alan Stern <[EMAIL PROTECTED]> wrote:
> On Sun, 10 Jul 2005, Ram wrote:
>
> > Hi,
> >
Hi,
When i connect my device (ethernet gadget) into the host. i get the message
when i do dmesg on host.
usbcore: registered new driver usbnet
usb 2-2: new full speed USB device using address 6
usb 2-2: device not accepting address 6, error -71
usb 2-2: new full speed USB device using addre
h i have mentioned above.
Regards,
Ram
(usb - host)
[EMAIL PROTECTED] ]# stty -a -F /dev/input/ttyACM0
speed 9600 baud; rows 0; columns 0; line = 0;
intr = ^C; quit = ^\; erase = ^?; kill = ^U; eof = ^D; eol = ;
eol2 = ; start = ^Q; stop = ^S; susp = ^Z; rprnt = ^R; werase = ^W;
lnext = ^V; fl
eps. but on host side
the cat command says:
no such device
Why ?.
What is wrong with my setup ?.
Please Explain.
I tried with both cdc-acm driver and usbserial drivers. But the result
is same. it is not working why ?
Regards,
Ram
---
hi,
While trying isochronous data over bluetooth , i am getting the following
message on the sending side.
The kernel version is 2.4.14.
usb-uhci >In function process_iso( )
usb-uhci: process_iso: 0: len :49 0230 status 0
usb-uhci: process_iso: 1: len :49 0230 status 0
hi ,
I am encountering the following error with kernel - 2.4 .14 and the fixed
toggle patch posted a few days back(usb-uhci version 1.275 ) applied .
I even tried with uhci.c( 2.4 .14) with the patch applied for fixed toggle
as well but to no avail.
The USB Bluetooth device from CSR is being
