David Hollis wrote:
>> So it's no longer complaining about anything except the rxqlen, but
>> unfortunately there is still no traffic getting in or out.
> It's not complaining about rxqlen, that's just a debug blurb. It sounds
> like the RX_CTL may not be getting set properly. Can you bring up th
On Wed, 2006-05-03 at 01:00 +0200, Mattias Bergsten wrote:
> Well, we've got some progress:
>
> usb 1-2.1: new high speed USB device using ehci_hcd and address 5
> usb 1-2.1: configuration #1 chosen from 1 choice
> asix 1-2.1:1.0: status ep1in, 8 bytes period 11
> eth1: register 'asix' at usb-000
David Hollis wrote:
> That's a good demonstration of testing code before you send it out! I
> meant to move that block that checks the PHY ID below the part where I
> actually read the PHY address but I didn't so it was reading from the
> wrong place. The attached patch seems to behave fine on x8
On Mon, 2006-05-01 at 23:17 +0200, Mattias Bergsten wrote:
> Had to upgrade to 2.6.17-rc3 to get the driver version to agree with
> the
> patch because of the restructuring. Tried with and without the patch
> on
> ppc but unfortunately does not work either way, without it's the same
> as
> before a
David Hollis wrote:
> On Sun, 2006-04-30 at 21:00 -0700, David Brownell wrote:
>> That PHY register failure would explain things ... maybe it's
>> a byteswap bug in that driver code?
>>
>
> This is the relevant portion from ax88772_bind():
>
> if (((ret = asix_read_cmd(dev, AX_CMD_READ_MI
On Sun, 2006-04-30 at 21:00 -0700, David Brownell wrote:
> That PHY register failure would explain things ... maybe it's
> a byteswap bug in that driver code?
>
This is the relevant portion from ax88772_bind():
if (((ret = asix_read_cmd(dev, AX_CMD_READ_MII_REG,
Hi,
please CC me on any replies as I'm not subscribed to the list.
I'm having trouble getting my Linksys USB200M v2.0 (which uses the ASIX
AX88772) to work on my Mac Mini (G4 with Apple's NEC USB controllers /
ohci_hcd) running 2.6.16.11, but the interesting thing is that it works
perfectly on
