Ah yes, everything works now. See below:
> On Fri, 9 Feb 2007, Stephan Esterhuizen wrote:
>
> > My usbmon shows the following:
> >
> > --- (1) Test for 12 bytes TX/RX _without_ writing the extra 1 byte bulk
> > --- packet ---
> > (12 byte tx/rx: run program for first time)
> > eb13c640 42687653
On Fri, 9 Feb 2007, Stephan Esterhuizen wrote:
> My usbmon shows the following:
>
> --- (1) Test for 12 bytes TX/RX _without_ writing the extra 1 byte bulk
> --- packet ---
> (12 byte tx/rx: run program for first time)
> eb13c640 4268765364 S Co:028:00 s 00 09 0001 0
> eb13c640 4268765
This is even more bizarre, the output below is from usbmon when I do two
12-byte writes/reads within the same program (in the previous example I
posted I did 2 12-byte writes/reads by calling my program twice).
---
(2x 12-byte writes/reads within the same program)
eb0e9cc0 1713314624 S Co:030:00 s
Pardon the very long lines. This has been fixed now.
My usbmon shows the following:
--- (1) Test for 12 bytes TX/RX _without_ writing the extra 1 byte bulk
--- packet ---
(12 byte tx/rx: run program for first time)
eb13c640 4268765364 S Co:028:00 s 00 09 0001 0
eb13c640 4268765473 C Co
On Fri, 9 Feb 2007, Stephan Esterhuizen wrote:
> I'm using Cypress bulkloop.hex firmware on an fx2lp (CY7C68013A) with simple
> host-side user-land code to transmit data to EP2 (out endpoint) and read the
> 'echo' on EP6 (in endpoint). The very first time the code is run it writes,
> say, 60 by
