On Sun, 5 Jun 2005, Dag Nygren wrote:
> There is no cable, the stick is connected directly to the connector.
> The device works fine with another computer.
>
> I would like to point out that I am pushing in a 2.0 stick into a 1.1
> controller here and I think an error is acceptable,
That's suppo
> On Sat, 4 Jun 2005, Dag Nygren wrote:
> > usb-storage: Status code -71; transferred 512/4096
> > usb-storage: -- unknown error
> > usb-storage: Bulk data transfer result 0x4
> > usb-storage: -- transport indicates error, resetting
> > usb-storage: usb_stor_Bulk_reset called
> > usb-storage: usb_
On Sat, 4 Jun 2005, Dag Nygren wrote:
> sda: Write Protect is off
> sda: Mode Sense: 03 00 00 00
> sda: assuming drive cache: write through
> sda:<7>usb-storage: queuecommand called
> usb-storage: *** thread awakened.
> usb-storage: Command READ_10 (10 bytes)
> usb-storage: 28 00 00 00 00 00 00
>
> Try turning on CONFIG_USB_STORAGE_DEBUG. The debugging log will provide
> information about what's going wrong.
OK, did that
here is the result:
sda: Mode Sense: 03 00 00 00
sda: assuming drive cache: write through
usb-storage: queuecommand called
usb-storage: *** thread awakened.
usb-sto
On Fri, 3 Jun 2005, Greg KH wrote:
> On Fri, Jun 03, 2005 at 11:05:32PM +0300, Dag Nygren wrote:
> > > On Fri, Jun 03, 2005 at 08:27:01PM +0300, Dag Nygren wrote:
> > > >
> > > > Hi,
> > > >
> > > > just installed 2.6.11.11 on a single board computer using
> > > > a SGS Thomson integrated USB co
