On 24.03.2018 06:37, Cyril Roelandt wrote:
Hello,
On 03/07/18 17:16, Mathias Nyman wrote:
I can try to write a workaround that sets dequeue pointers for both the stream
we want, and
the current active stream for each URB canceling.
Is there a branch from which I could pull the workaround
Hello,
On 03/07/18 17:16, Mathias Nyman wrote:
> I can try to write a workaround that sets dequeue pointers for both the
> stream we want, and
> the current active stream for each URB canceling.
Is there a branch from which I could pull the workaround and test it?
Regards,
Cyril Roelandt.
--
On 06.03.2018 04:24, Cyril Roelandt wrote:
Hi,
On 02/28/18 15:55, Mathias Nyman wrote:
I have a series of even more custom debugging patches.
attached patches apply on 4.13, but seris for both 4.13 and 4.15 can be found
in the
streams-debug-4.13 and streams-debug-4.15 branches at
Hi
On 23.02.2018 04:55, Cyril Roelandt wrote:
Hello,
On 02/21/18 17:04, Mathias Nyman wrote:
could you change one flag in the xhci driver and take the same
set of logs? It will add more details about the URB and xHC hw position check.
diff --git a/drivers/usb/host/xhci-ring.c
On 19.02.2018 01:38, Cyril Roelandt wrote:
Hello,
I'm inlining my answers to your questions.
On 02/15/18 17:30, Mathias Nyman wrote:
On 15.02.2018 03:05, Cyril Roelandt wrote:
Hi,
I use two hard drives in an enclosure connected to my PC using UAS. The
enclosure is a JMicron JMS56x
Hi
Adding Oliver
On 15.02.2018 03:05, Cyril Roelandt wrote:
Hi,
I use two hard drives in an enclosure connected to my PC using UAS. The
enclosure is a JMicron JMS56x (152d:0562); the drives are a Fujitsu MHZ2160BH
G2 (2"5, 160GB) and a Western Digital EFRX-68N32N0 (3"5, 4TB).
Using a USB2
Hi,
I use two hard drives in an enclosure connected to my PC using UAS. The
enclosure is a JMicron JMS56x (152d:0562); the drives are a Fujitsu MHZ2160BH
G2 (2"5, 160GB) and a Western Digital EFRX-68N32N0 (3"5, 4TB).
Using a USB2 port, I can see both drives as expected. I used to be able to use
