The output is:
Jun 27 01:38:14 sheevaplug-debian kernel: uvc_commit_video
Jun 27 01:38:14 sheevaplug-debian kernel: uvc_set_video_ctrl: bmHint: 1;
bFormatIndex: 2; bFrameIndex: 28; dwFrameInterval: 200;
wKeyFrameRate: 0; wCompQuality: 61; wCompWindowSize: 0; wDelay: 0;
dwMaxVideoFrameSize
On Do, 2011-06-02 at 22:58 -0400, Philip Gladstone wrote:
Sorry for the long delay in responding. I will try these changes.
did you used this patch?
http://www.mail-archive.com/linux-uvc-devel@lists.berlios.de/msg05724.html
However, the scoop on the other various patches is as follows:
in
Sorry for the long delay in responding. I will try these changes.
However, the scoop on the other various patches is as follows:
in 2592x1944 mode, at 10fps, 4bpp for mjpg, the fix_jpeg_bandwidth makes
things worse with 3476 B/frame rather than the device specified 3060
B/frame.
At
Hi Philip,
i probably will not solve your problem but i wont to take a look on it.
Can you please apply attached debug patch and send me the log.
this patch was made on top of fd2b6dd22743f7c96f7c6e97d49ff5f4b422e741
Make sure you have CONFIG_DYNAMIC_DEBUG=y enabled. To start dynamic
debug you
Hi Philip,
On Sunday 20 February 2011 21:57:24 Philip Gladstone wrote:
I attached two C910s to a small linux box, and ran into the 'Failed to
submit URB' problem.
When I look at the descriptors for this camera, I think I understand the
problem. I'm capturing at 5 Mpixels and I'm trying two
Hi,
please check this link:
http://forums.quickcamteam.net/showthread.php?tid=1305
with a little fix to the previous patch the camera seems to work fine
with at least two units streaming at the same time.
I can't send an updated patch right now since my adsl connection is on
the slow side at the
It turned out that my kernel had an old uvcvideo module which didn't
have the right debug log messages, and so I'm in the process of
upgrading to a current kernel version. So far, I've managed to render my
machine unbootable [it is a little embedded linux box].
Philip
On 3/6/2011 6:14 AM,
Hello,
I have same problem. I have found, that C910 alocate whole USB bus and there is
no possibility
to run two C910 in one USB controller, if you connect second C910 to different
USB controllers both cameras
are working.
Regards
Radek Masin
ra...@masin.eu
Dne Ne, 20 Úno 2011 21:57 ,
Am Montag, den 21.02.2011, 08:46 +0100 schrieb Alexey Fisher:
Am Sonntag, den 20.02.2011, 15:57 -0500 schrieb Philip Gladstone:
I attached two C910s to a small linux box, and ran into the 'Failed to
submit URB' problem.
When I look at the descriptors for this camera, I think I
Am Sonntag, den 20.02.2011, 15:57 -0500 schrieb Philip Gladstone:
I attached two C910s to a small linux box, and ran into the 'Failed to
submit URB' problem.
When I look at the descriptors for this camera, I think I understand the
problem. I'm capturing at 5 Mpixels and I'm trying two
10 matches
Mail list logo
