On 03/06/2015 04:15 PM, jes.soren...@redhat.com wrote:
From: Jes Sorensen jes.soren...@redhat.com
This is a new driver for the rtl8723au which was written from scratch,
to utilize the Linux mac80211 stack.
This has been a pet project for me for some time I finally feel it
is stable enough to
drivers/net/wireles/iwlwifi/mvm fails to build for me on
net-next.
Eric W. Biederman (2):
iwlwifi: mvm: Fix the build of mvm/mac-ctxt.c with debugfs disabled
iwlwifi: mvm: Fix the build of mvm/phy-ctxt.c with debugfs disabled
drivers/net/wireless/iwlwifi/mvm/mac-ctxt.c | 7 ++-
When attempting to build my kernel I get:
CC drivers/net/wireless/iwlwifi/mvm/mac-ctxt.o
drivers/net/wireless/iwlwifi/mvm/mac-ctxt.c: In function
‘iwl_mvm_beacon_loss_iterator’:
drivers/net/wireless/iwlwifi/mvm/mac-ctxt.c:1378:30: error: ‘struct
iwl_mvm_vif’ has no member named ‘mvm’
When attempting to build my kernel I get:
CC drivers/net/wireless/iwlwifi/mvm/phy-ctxt.o
drivers/net/wireless/iwlwifi/mvm/phy-ctxt.c: In function
‘iwl_mvm_phy_ctxt_cmd_data’:
drivers/net/wireless/iwlwifi/mvm/phy-ctxt.c:178:6: error: ‘struct iwl_mvm’ has
no member named
On Fri, 2015-03-06 at 17:15 -0500, jes.soren...@redhat.com wrote:
From: Jes Sorensen jes.soren...@redhat.com
This is an alternate driver for the Realtek 8723AU (rtl8723au) written
from scratch utilizing the mac80211 stack.
After spending months cleaning up the vendor provided rtl8723au
repost, unintentionally removed linux-wireless from CC
On 03/06/2015 01:32 PM, Henning Rogge wrote:
On Fri, Mar 6, 2015 at 1:24 PM, Zefir Kurtisi zefir.kurt...@neratec.com
wrote:
On 03/06/2015 09:04 AM, Henning Rogge wrote:
[...]
Second, we are seeing a huge amount of radar events on some
From: Pontus Fuchs pont...@broadcom.com
A short or malformed vendor command buffer could cause reads outside
the command buffer.
Cc: sta...@vger.kernel.org # v3.19
Signed-off-by: Pontus Fuchs pont...@broadcom.com
[ar...@broadcom.com: slightly modified debug trace output]
Signed-off-by: Arend van
On 03/06/15 16:18, Arend van Spriel wrote:
From: Pontus Fuchspont...@broadcom.com
A short or malformed vendor command buffer could cause reads outside
the command buffer.
Cc: sta...@vger.kernel.org # v3.19
Signed-off-by: Pontus Fuchspont...@broadcom.com
[ar...@broadcom.com: slightly modified
Quentin Lambert lambert.quen...@gmail.com writes:
This patch reduces the kernel size by removing error messages that duplicate
the normal OOM message.
A simplified version of the semantic patch that finds this problem is as
follows: (http://coccinelle.lip6.fr)
This patch removes useful
On Fri, 6 Mar 2015, Jes Sorensen wrote:
Quentin Lambert lambert.quen...@gmail.com writes:
This patch reduces the kernel size by removing error messages that duplicate
the normal OOM message.
A simplified version of the semantic patch that finds this problem is as
follows:
On 6 March 2015 at 10:26, Henning Rogge hro...@gmail.com wrote:
On Fri, Mar 6, 2015 at 9:38 AM, Janusz Dziedzic
janusz.dzied...@tieto.com wrote:
On 6 March 2015 at 09:04, Henning Rogge hro...@gmail.com wrote:
First, we cannot open a Mesh interface on a DFS channel unless we open
an AP
On Fri, Mar 06, 2015 at 01:54:22PM +0100, Henning Rogge wrote:
Yes, wpa_supplicant has support for mesh BSS since November.
Do you mean IBSS or 802.11s?
Mesh BSS is the name of the functionality that was added in the 802.11s
amendment.. 802.11s is not really a good name to use for this taken
On Fri, Mar 6, 2015 at 1:24 PM, Zefir Kurtisi zefir.kurt...@neratec.com wrote:
On 03/06/2015 09:04 AM, Henning Rogge wrote:
[...]
Second, we are seeing a huge amount of radar events on some nodes, but
not on a node on the same channel in the next room. What is the status
of the DFS detector
On 03/06/2015 09:04 AM, Henning Rogge wrote:
[...]
Second, we are seeing a huge amount of radar events on some nodes, but
not on a node on the same channel in the next room. What is the status
of the DFS detector in ath9k, is it reliable or is it still
experimental.
Henning,
the DFS
On Fri, Mar 6, 2015 at 1:50 PM, Jouni Malinen j...@w1.fi wrote:
On Fri, Mar 06, 2015 at 01:29:06PM +0100, Janusz Dziedzic wrote:
So, in case of ibss/mesh you could make wpa_supplicant dfs.c common
and use it (perform CAC and other operations).
I actually pushed out changes yesterday to allow
Remove duplicated prototype in base.h
Signed-off-by: Taehee Yoo ap420...@gmail.com
---
drivers/net/wireless/rtlwifi/base.h | 1 -
1 file changed, 1 deletion(-)
diff --git a/drivers/net/wireless/rtlwifi/base.h
b/drivers/net/wireless/rtlwifi/base.h
index dee4ac2..ff9a4bf 100644
---
Julia Lawall julia.law...@lip6.fr writes:
On Fri, 6 Mar 2015, Jes Sorensen wrote:
Quentin Lambert lambert.quen...@gmail.com writes:
This patch reduces the kernel size by removing error messages that
duplicate
the normal OOM message.
A simplified version of the semantic patch that
Hi Dave,
here's a pull request for net-next. Lots of smaller fixes and cleanup,
major changes are documented in the signed tag and available below
Do note that I wasn't able compile net-next (commit 23375a0fd549) with
my config:
wireless-drivers-next/include/net/switchdev.h:133: multiple
Jim Davis jim.ep...@gmail.com writes:
However, that commit is in next-20150304 and we still get the error
(see, for example,
http://kisskb.ellerman.id.au/kisskb/buildresult/12376688/).
I applied few fixes from Rafal and Chen:
1ca2760fb2c1 bcma: prepare Kconfig symbol for PCI driver
Grumbach, Emmanuel emmanuel.grumb...@intel.com writes:
Hi Kalle,
This is a pull request for 4.0. Details in the tag as usual.
Thanks!
The following changes since commit f5af19d10d151c5a2afae3306578f485c244db25:
Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net (2015-02-17
On Fri, Mar 06, 2015 at 10:34:42AM +0100, wim torfs wrote:
Hi,
Perhaps a silly question, and I'm sure you already covered this, but I need
to ask, just to be sure. Did you enable promiscuous mode to capture the data
packets?
Could you elaborate on the employed method for capturing the
On Thursday 05 March 2015 18:07:17 Johannes Berg wrote:
From: Johannes Berg johannes.b...@intel.com
Both minstrel (reported by Sven Eckelmann) and the iwlwifi rate
control aren't properly taking concurrency into account. It's
likely that the same is true for other rate control algorithms.
On Fri, Mar 6, 2015 at 9:38 AM, Janusz Dziedzic
janusz.dzied...@tieto.com wrote:
On 6 March 2015 at 09:04, Henning Rogge hro...@gmail.com wrote:
First, we cannot open a Mesh interface on a DFS channel unless we open
an AP interface first (and closing the AP interface before activating
the
Hi,
On 03/06/2015 06:20 AM, Marco wrote:
On 03/05/15 06:10, Christian Lamparter wrote:
Hello,
On Wednesday, March 04, 2015 11:02:25 PM ma...@tampabay.rr.com wrote:
Quite a while back after doing an upgrade to the latest (back then)
compat-wireless, I noticed that I was only seeing
Abstraction layer for peer flags is added to fix
ABI breakage.
Signed-off-by: SenthilKumar Jegadeesan sjega...@qti.qualcomm.com
---
V2:
- Subject: [PATCH] ath10k: Enable encryption of ADDBA request in PMF patch
is split into two patches.
patch 1 : Add abstraction layer for peer flags
In HT mode, firmware is not encrypting ADDBA request as PMF
configuration is not set in peer flags during association.
Set peer flags for MFP enabled station in ath10k driver.
This change depends on mac80211 patch [PATCH] mac80211: send
station PMF configuration to driver.
Signed-off-by:
From: Hante Meuleman meule...@broadcom.com
On removal of SDIO card both functions of card will be getting
a remove call. When the first is hanging in ctrl frame xmit then
the second will cause oops. This patch fixes the xmit ctrl
handling in case of serious errors and also limits the handling
for
This patch series adds new BCM4345 SDIO device support to brcmfmac and
address a number of potential issues either found by testing or code
inspection.
The series is intended for the v4.1 kernel and applies to the master
branch of the wireless-drivers-next repository.
Hante Meuleman (4):
From: Hante Meuleman meule...@broadcom.com
The watchdog thread is used to put the SDIO bus to sleep when the
system is idling. This patch simplifies the way it is determined
when sleep can be entered.
Reviewed-by: Arend Van Spriel ar...@broadcom.com
Reviewed-by: Franky (Zhenhui) Lin
On Fri, 2015-03-06 at 11:08 -0500, Jes Sorensen wrote:
Julia Lawall julia.law...@lip6.fr writes:
On Fri, 6 Mar 2015, Jes Sorensen wrote:
Quentin Lambert lambert.quen...@gmail.com writes:
This patch reduces the kernel size by removing error messages that
duplicate
the normal OOM
From: Syed Asifful Dayyan sy...@broadcom.com
These changes add support for BCM4345 SDIO chipset.
Reviewed-by: Pieter-Paul Giesberts piete...@broadcom.com
Reviewed-by: Arend Van Spriel ar...@broadcom.com
Reviewed-by: Hante Meuleman meule...@broadcom.com
Reviewed-by: Daniel (Deognyoun) Kim
On 03/06/2015 05:12 PM, marco wrote:
On Fri, Mar 06, 2015 at 10:34:42AM +0100, wim torfs wrote:
Hi,
Perhaps a silly question, and I'm sure you already covered this, but I need
to ask, just to be sure. Did you enable promiscuous mode to capture the data
packets?
Could you elaborate on the
From: Hante Meuleman meule...@broadcom.com
Msgbuf is using a wait_event_timeout to wait for the response on
an ioctl. The wakeup routine uses waitqueue_active to see if
wait_event_timeout has been called. There is a chance that the
response arrives before wait_event_timeout is called, this
will
From: Hante Meuleman meule...@broadcom.com
SDIO is using a shared variable to handoff ctl frames to DPC
and to see when they are done. In a timeout situation this can
lead to erroneous situation where DPC started to handle the ctl
frame while the timeout expired. This patch will fix this by
Joe Perches j...@perches.com writes:
On Fri, 2015-03-06 at 11:08 -0500, Jes Sorensen wrote:
Julia Lawall julia.law...@lip6.fr writes:
On Fri, 6 Mar 2015, Jes Sorensen wrote:
Quentin Lambert lambert.quen...@gmail.com writes:
This patch reduces the kernel size by removing error messages
On Fri, 2015-03-06 at 14:43 -0500, Jes Sorensen wrote:
Joe Perches j...@perches.com writes:
On Fri, 2015-03-06 at 11:08 -0500, Jes Sorensen wrote:
Julia Lawall julia.law...@lip6.fr writes:
On Fri, 6 Mar 2015, Jes Sorensen wrote:
Quentin Lambert lambert.quen...@gmail.com writes:
This
From: Kalle Valo kv...@codeaurora.org
Date: Fri, 06 Mar 2015 19:08:10 +0200
here's a pull request for net-next. Lots of smaller fixes and cleanup,
major changes are documented in the signed tag and available below
Do note that I wasn't able compile net-next (commit 23375a0fd549) with
my
Michal Kazior michal.kaz...@tieto.com writes:
Some files are getting bloated and it makes sense
to split some of the code into separate files. Do
so with the P2P NoA code and prepare it for reuse.
Signed-off-by: Michal Kazior michal.kaz...@tieto.com
Thanks, both patches applied.
--
Kalle
On Sat, 2015-03-07 at 00:37 -0500, Jes Sorensen wrote:
Joe Perches j...@perches.com writes:
On Sat, 2015-03-07 at 00:23 -0500, Jes Sorense wrote:
Larry Finger larry.fin...@lwfinger.net writes:
I also
think that this code should be placed in a separate sub directory
under
Joe Perches j...@perches.com writes:
On Sat, 2015-03-07 at 00:18 -0500, Jes Sorensen wrote:
The long strings are an outright nack.
Pity. There's a specific exclusion in CodingStyle.
Chapter 2: Breaking long lines and strings
never break user-visible strings such as
printk messages,
On Sat, 2015-03-07 at 00:23 -0500, Jes Sorensen wrote:
Larry Finger larry.fin...@lwfinger.net writes:
I also
think that this code should be placed in a separate sub directory
under drivers/net/wireless.
[]
If the code grows substantially, we can
move it into a sub directory, but for now
Rajkumar Manoharan rmano...@qti.qualcomm.com writes:
Allow user to configure the duty cycle upto 100%. Since thermal
mitigation algorithm is running in user space, remove the driver
level limitation and let the user to control the temperature.
Signed-off-by: Rajkumar Manoharan
Michal Kazior michal.kaz...@tieto.com writes:
The command was truncated so the parameter value
was seen in fw as 0. This caused U-APSD enabled
stations to be misconfigured and mistreated by AP.
Signed-off-by: Michal Kazior michal.kaz...@tieto.com
Thanks, applied.
--
Kalle Valo
--
To
Larry Finger larry.fin...@lwfinger.net writes:
On 03/06/2015 04:15 PM, jes.soren...@redhat.com wrote:
From: Jes Sorensen jes.soren...@redhat.com
This is a new driver for the rtl8723au which was written from scratch,
to utilize the Linux mac80211 stack.
This has been a pet project for me for
On Sat, 2015-03-07 at 00:18 -0500, Jes Sorensen wrote:
The long strings are an outright nack.
Pity. There's a specific exclusion in CodingStyle.
Chapter 2: Breaking long lines and strings
never break user-visible strings such as
printk messages, because that breaks the ability to grep
David Miller da...@davemloft.net writes:
From: Kalle Valo kv...@codeaurora.org
Date: Fri, 06 Mar 2015 19:08:10 +0200
here's a pull request for net-next. Lots of smaller fixes and cleanup,
major changes are documented in the signed tag and available below
Do note that I wasn't able compile
ebied...@xmission.com (Eric W. Biederman) writes:
drivers/net/wireles/iwlwifi/mvm fails to build for me on
net-next.
Eric W. Biederman (2):
iwlwifi: mvm: Fix the build of mvm/mac-ctxt.c with debugfs disabled
iwlwifi: mvm: Fix the build of mvm/phy-ctxt.c with debugfs disabled
Michal Kazior michal.kaz...@tieto.com writes:
When running 802.1x WEP keys must be installed
without pairwise-groupwise swap (which is
necessary for static WEP).
Signed-off-by: Michal Kazior michal.kaz...@tieto.com
Thanks, both patches applied.
--
Kalle Valo
--
To unsubscribe from this
Bartosz Markowski bartosz.markow...@tieto.com writes:
This has been missed while adding the QCA6174 support.
As in the last time, without advertising the firmware files
as needed (or optional) for ath10k, these won't be built into
ram disk for instance.
Signed-off-by: Bartosz Markowski
Joe Perches j...@perches.com writes:
On Fri, 2015-03-06 at 17:15 -0500, jes.soren...@redhat.com wrote:
From: Jes Sorensen jes.soren...@redhat.com
This is an alternate driver for the Realtek 8723AU (rtl8723au) written
from scratch utilizing the mac80211 stack.
After spending months
Joe Perches j...@perches.com writes:
On Sat, 2015-03-07 at 00:23 -0500, Jes Sorensen wrote:
Larry Finger larry.fin...@lwfinger.net writes:
I also
think that this code should be placed in a separate sub directory
under drivers/net/wireless.
[]
If the code grows substantially, we can
Michal Kazior michal.kaz...@tieto.com writes:
Firmware doesn't report a complete and
ready-to-use vht cap. Instead the driver is
supposed to fill in the missing bits related to
number of chains.
This effectively increases Compressed Steering
Number and Number of Sounding Dimensions in
Michal Kazior michal.kaz...@tieto.com writes:
qca6174 with wmi-tlv firmware uses offloaded
beaconing scheme (i.e. templates). This requires a
little different approach when implementing CSA.
Add missing code to update CS count and report CSA
completion to mac80211. Without it channel switch
Hi,
I am working with a co-worker on DFS-support for the 802.11s
implementation of the mac80211 stack.
As a test we just removed the test for DFS not supported from
net/mac80211/mesh.c, but we are still facing two problems.
First, we cannot open a Mesh interface on a DFS channel unless we open
On Fri, Mar 6, 2015 at 1:41 AM, Randy Dunlap rdun...@infradead.org wrote:
On 03/04/15 19:34, Stephen Rothwell wrote:
Hi all,
Changes since 20150304:
on i386, when IWLWIFI_DEBUGFS is not enabled:
../drivers/net/wireless/iwlwifi/mvm/phy-ctxt.c:179:38: error: 'struct
iwl_mvm' has no
This patch reduces the kernel size by removing error messages that duplicate
the normal OOM message.
A simplified version of the semantic patch that finds this problem is as
follows: (http://coccinelle.lip6.fr)
@@
identifier f,print,l;
expression e;
constant char[] c;
@@
e =
On 6 March 2015 at 09:04, Henning Rogge hro...@gmail.com wrote:
Hi,
I am working with a co-worker on DFS-support for the 802.11s
implementation of the mac80211 stack.
As a test we just removed the test for DFS not supported from
net/mac80211/mesh.c, but we are still facing two problems.
On Thu, 2015-03-05 at 23:55 +0100, Luis R. Rodriguez wrote:
On Wed, Mar 04, 2015 at 12:32:07AM -0500, Ilan Peer wrote:
Timeout was scheduled only in case CRDA was called due to user hints,
but was not scheduled for other cases. This can result in regulatory
hint processing getting stuck in
From: Jes Sorensen jes.soren...@redhat.com
This is a new driver for the rtl8723au which was written from scratch,
to utilize the Linux mac80211 stack.
This has been a pet project for me for some time I finally feel it
is stable enough to submit. I have used it for a while without any
serious
59 matches
Mail list logo