On Montag, 11. Dezember 2017 18:50:09 CET ako...@codeaurora.org wrote:
[...]
> >> > Just tried this on an QCA9984 which doesn't seem to have the
> >> > calibration data in the PCI EEPROM.
> >> >
> >> > [ 71.728929] ath10k_pci :01:00.0: qca9984/qca9994 hw1.0
> >> > target 0x0100
On 2017-12-08 19:10, Sven Eckelmann wrote:
On Freitag, 8. Dezember 2017 18:05:38 CET ako...@codeaurora.org wrote:
On 2017-12-08 17:42, Sven Eckelmann wrote:
> On Donnerstag, 25. Mai 2017 16:21:23 CET ako...@qti.qualcomm.com wrote:
>> From: Anilkumar Kolli
>>
>>
On Freitag, 8. Dezember 2017 18:05:38 CET ako...@codeaurora.org wrote:
> On 2017-12-08 17:42, Sven Eckelmann wrote:
> > On Donnerstag, 25. Mai 2017 16:21:23 CET ako...@qti.qualcomm.com wrote:
> >> From: Anilkumar Kolli
> >>
> >> QCA99X0, QCA9888, QCA9984 supports
On 2017-12-08 17:42, Sven Eckelmann wrote:
On Donnerstag, 25. Mai 2017 16:21:23 CET ako...@qti.qualcomm.com wrote:
From: Anilkumar Kolli
QCA99X0, QCA9888, QCA9984 supports calibration data in
either OTP or DT/pre-cal file. Current ath10k supports
Calibration data from
On Donnerstag, 25. Mai 2017 16:21:23 CET ako...@qti.qualcomm.com wrote:
> From: Anilkumar Kolli
>
> QCA99X0, QCA9888, QCA9984 supports calibration data in
> either OTP or DT/pre-cal file. Current ath10k supports
> Calibration data from OTP only.
>
> If caldata is loaded
From: Anilkumar Kolli
QCA99X0, QCA9888, QCA9984 supports calibration data in
either OTP or DT/pre-cal file. Current ath10k supports
Calibration data from OTP only.
If caldata is loaded from DT/pre-cal file, fetching board id
and applying calibration parameters like tx