This patch is to display the average ack rssi for data
frames. "avg ack signal" field diplay limited by host based on
firmware capablities.
Example output:
localhost ~ #iw dev wlan-5000mhz station dump
Station 34:f3:9a:aa:3b:29 (on wlan-5000mhz)
inactive time: 5370 ms
rx bytes:
This patch is to display the average ack rssi for data
frames. "avg ack signal" field diplay limited by host based on
firmware capablities.
Example output:
localhost ~ #iw dev wlan-5000mhz station dump
Station 34:f3:9a:aa:3b:29 (on wlan-5000mhz)
inactive time: 5370 ms
rx bytes:
Attn: Beneficiary,
We have contacted the Federal Ministry of Finance on your Behalf and
they have brought a solution to your problem by coordinating your
payment in total (10,000,000.00) Ten Million Dollars in an atm card
which you can use to withdraw money from any ATM MACHINE CENTER
anywhere in
This patchset changes to display the average ack rssi
for data frames.
"avg ack signal" field diplay limited by host based on
firmware capablities.
Example output:
localhost ~ #iw dev wlan-5000mhz station dump
Station 34:f3:9a:aa:3b:29 (on wlan-5000mhz)
inactive time: 5370 ms
rx
Never directly free @dev after calling device_register(), even
if it returned an error! Always use put_device() to give up the
reference initialized.
Signed-off-by: Arvind Yadav
---
changes in v2:
Removed kfree() call for @dev.
changes in v3:
Add put_device() in place of
On Thu, 8 Mar 2018 10:39:49 +0530
Arvind Yadav wrote:
> Never directly free @dev after calling device_register(), even
> if it returned an error! Always use put_device() to give up the
> reference initialized.
>
> Signed-off-by: Arvind Yadav
> ---
> changes in v2:
> Removed kfree(
High bits of antenna number are reserved in hardware spec,
using low 4 bits represent supported antenna.
Signed-off-by: Cathy Luo
Signed-off-by: Xinming Hu
---
drivers/net/wireless/marvell/mwifiex/cmdevt.c | 3 ++-
1 file changed, 2 insertions(+), 1 deletion(-)
diff --git a/drivers/net/wireles
Never directly free @dev after calling device_register(), even
if it returned an error! Always use put_device() to give up the
reference initialized.
Signed-off-by: Arvind Yadav
---
changes in v2:
Removed kfree() call for @dev.
drivers/ssb/main.c | 2 +-
1 file changed, 1 insertion
> -Original Message-
> From: Kalle Valo [mailto:kv...@codeaurora.org]
> Sent: Tuesday, March 06, 2018 9:41 PM
> To: Govind Singh ; Yamada, Masahiro/山田 真弘
>
> Cc: linux-wireless@vger.kernel.org; ath...@lists.infradead.org
> Subject: Re: [PATCH 01/13] ath10k: platform driver for WCN3990 SN
And BTW, thank you to all of you involved on this, for the testing and the work
involved. And all.
BTW - happy woman fest to all of you wimen, and the ones you know.
Enrico
On Wed, 7 Mar 2018, Jamie Stuart wrote:
Date: Wed, 7 Mar 2018 16:47:34
From: Jamie Stuart
To: Stanislaw Gruszka
Cc:
Thank you very very much guys for keeping me up to date with the progress, it's
important for me.
Even if I am not subscribed to the list.
Thank you for all guys.
On Wed, 7 Mar 2018, Jamie Stuart wrote:
Date: Wed, 7 Mar 2018 16:47:34
From: Jamie Stuart
To: Stanislaw Gruszka
Cc: Daniel Golle
From: Ben Greear
This is similar to ETHTOOL_GSTATS, but it allows you to specify
a 'level'. This level can be used by the driver to decrease the
amount of stats refreshed. In particular, this helps with ath10k
since getting the firmware stats can be slow.
Signed-off-by: Ben Greear
---
NOTE:
On Wednesday 07 March 2018 11:08 PM, Michael Büsch wrote:
On Wed, 7 Mar 2018 22:46:14 +0530
arvindY wrote:
diff --git a/drivers/ssb/main.c b/drivers/ssb/main.c
index 65420a9..c4449e0 100644
--- a/drivers/ssb/main.c
+++ b/drivers/ssb/main.c
@@ -521,6 +521,7 @@ static int ssb_devices_register(s
On Wed, 7 Mar 2018 10:25:50 +0100, Lorenzo Bianconi wrote:
> Remove mt7601u_dev parameter from mt7601u_mcu_msg_alloc signature since
> dev pointer is never used in routine body
>
> Signed-off-by: Lorenzo Bianconi
Acked-by: Jakub Kicinski
Am 07.03.2018 um 17:22 schrieb Rafał Miłecki:
On 2 March 2018 at 10:22, Sebastian Gottschall wrote:
leds-gpio is crap and limited. you can just register one platform data at
kernel runtime since its identified by its object name "led-gpio" but the
kernel forbidds to register 2 platform datas wi
On Wed, 7 Mar 2018 22:46:14 +0530
arvindY wrote:
> >> diff --git a/drivers/ssb/main.c b/drivers/ssb/main.c
> >> index 65420a9..c4449e0 100644
> >> --- a/drivers/ssb/main.c
> >> +++ b/drivers/ssb/main.c
> >> @@ -521,6 +521,7 @@ static int ssb_devices_register(struct ssb_bus *bus)
> >>
On Wednesday 07 March 2018 10:17 PM, Michael Büsch wrote:
On Wed, 7 Mar 2018 15:31:30 +0530
Arvind Yadav wrote:
if device_register() returned an error! Always use put_device()
to give up the reference initialized.
Signed-off-by: Arvind Yadav
---
drivers/ssb/main.c | 1 +
1 file changed
When destroying a net namespace, all hwsim interfaces, which are not
created in default namespace are deleted. But the async deletion of the
interfaces could last longer than the actual destruction of the
namespace, which results to an use after free bug. Therefore use
synchronous deletion in this
On Wed, 7 Mar 2018 15:31:30 +0530
Arvind Yadav wrote:
> if device_register() returned an error! Always use put_device()
> to give up the reference initialized.
>
> Signed-off-by: Arvind Yadav
> ---
> drivers/ssb/main.c | 1 +
> 1 file changed, 1 insertion(+)
>
> diff --git a/drivers/ssb/main
Hi Thomas
Thank you for your reply.
Could you please let me know how can I verify these queues on a mesh
router? (I am using TPLink router with Ath9k chipset).
Also, the TXQ parameters can only be set if device is in AP or P2P
mode. Do you have any idea why this restriction is in place?
https:/
On 2 March 2018 at 10:22, Sebastian Gottschall wrote:
>>> leds-gpio is crap and limited. you can just register one platform data at
>>> kernel runtime since its identified by its object name "led-gpio" but the
>>> kernel forbidds to register 2 platform datas with the same name
>>> consider the ar7
Hi Stanis,
Our environment has the following wireless config (MT7620A):
config wifi-device 'radio0'
option type 'mac80211'
option channel 'auto'
option hwmode '11g'
option path 'platform/1018.wmac'
option txpower '20'
option country 'GB'
Arend Van Spriel wrote:
> The feature module needs to evaluate the actual firmware error return
> upon a control command. This adds a flag to struct brcmf_if that the
> caller can set. This flag is checked to determine the error code that
> needs to be returned.
>
> Fixes: b69c1df47281 ("brcmfma
This patch fixes regression caused by 0c317a02ca98
("cfg80211: support virtual interfaces with different beacon intervals"),
with this change cfg80211 expects the driver to advertize
'beacon_int_min_gcd' to support different beacon intervals in multivap
scenario. This support is added for, QCA988X/
I forgot to attach the patches, do it now.
On Wed, Mar 07, 2018 at 01:27:01PM +0100, Stanislaw Gruszka wrote:
> On Thu, Mar 01, 2018 at 04:30:10PM +0100, Daniel Golle wrote:
> > [forwarding to all other involved players]
> >
> > On Thu, Mar 01, 2018 at 05:50:51PM +0300, Jamie Stuart wrote:
> > >
On Thu, Mar 01, 2018 at 04:30:10PM +0100, Daniel Golle wrote:
> [forwarding to all other involved players]
>
> On Thu, Mar 01, 2018 at 05:50:51PM +0300, Jamie Stuart wrote:
> > Hi Daniel,
> > The driver seems much improved after this fix.
>
> it's about those two
> [PATCH 1/2] rt2x00: pause almos
if device_register() returned an error! Always use put_device()
to give up the reference initialized.
Signed-off-by: Arvind Yadav
---
drivers/ssb/main.c | 1 +
1 file changed, 1 insertion(+)
diff --git a/drivers/ssb/main.c b/drivers/ssb/main.c
index 65420a9..c4449e0 100644
--- a/drivers/ssb/mai
Remove mt7601u_dev parameter from mt7601u_mcu_msg_alloc signature since
dev pointer is never used in routine body
Signed-off-by: Lorenzo Bianconi
---
drivers/net/wireless/mediatek/mt7601u/mcu.c | 7 +++
1 file changed, 3 insertions(+), 4 deletions(-)
diff --git a/drivers/net/wireless/mediat
28 matches
Mail list logo