On 09/17/2016 05:50 PM, Johannes Berg wrote:
drivers/net/wireless/quantenna/qtnfmac/event.c: In function
`qtnf_event_handle_scan_complete':
drivers/net/wireless/quantenna/qtnfmac/event.c:342:2: warning:
passing argument 2 of `cfg80211_scan_done' makes pointer from integer
without a cast [enabled
On 09/17/2016 04:56 PM, Kalle Valo wrote:
writes:
From: Avinash Patil
This patch adds support for new FullMAC WiFi driver for Quantenna
QSR10G chipsets.
QSR10G is Quantenna's 8x8, 160M, 11ac offering.
QSR10G supports 2 simultaneous WMACs- one 5G and one 2G. 5G WMAC
supports 160M, 8x8 confi
On 09/17/2016 04:46 PM, Kalle Valo wrote:
writes:
From: Avinash Patil
This patch adds support for new FullMAC WiFi driver for Quantenna
QSR10G chipsets.
QSR10G is Quantenna's 8x8, 160M, 11ac offering.
QSR10G supports 2 simultaneous WMACs- one 5G and one 2G. 5G WMAC
supports 160M, 8x8 confi
On 09/26/2016 01:56 PM, Kalle Valo wrote:
IgorMitsyanko writes:
On 09/17/2016 04:46 PM, Kalle Valo wrote:
writes:
+/* Supported rates to be advertised to the cfg80211 */
+static struct ieee80211_rate qtnf_rates[] = {
+ {.bitrate = 10, .hw_value = 2, },
+ {.bitrate = 20
On 11/10/2016 12:05 AM, Johannes Berg wrote:
I understand, and I understand that you/they are actually providing it
when asked.
However, the carl9170 project has its (entirely GPL) source tree out in
the open, making it much *easier* and that was *still* thought to not
be sufficient; I don't rec
Thanks, Johannes.
To clarify with you and Kalle, as persons involved with linux-wireless:
is my understanding correct that submitting firmware into linux-fimware
repository is a prerequisite to accepting new driver into linux-wireless?
There is an option to start Quantenna device from interna
On 11/15/2016 12:06 PM, Johannes Berg wrote:
On Wed, 2016-11-09 at 17:00 +0300, igor.mitsyanko...@quantenna.com
wrote:
+static int
+qtnf_change_virtual_intf(struct wiphy *wiphy,
+struct net_device *dev,
+enum nl80211_iftype type, u32 *flags,
+
Resending because previous attempt was rejected by vger.kernel.org
On 11/16/2016 06:04 PM, IgorMitsyanko wrote:
On 11/14/2016 12:52 PM, Johannes Berg wrote:
+++ b/drivers/net/wireless/quantenna/qtnfmac/Kconfig
@@ -0,0 +1,23 @@
+config QTNFMAC
+ tristate "Quantenna WiFi FullMAC
Hi Ben, Kyle,
could you please share what is the position of linux-firmware regarding
firmware binaries that include GPL components? Does it require entire
GPL components codebase be present in linux-firmware tree, or maybe
having this clause in license file is enough:
+Open Source Software. T
On 11/23/2016 06:25 PM, Kalle Valo wrote:
IgorMitsyanko writes:
To clarify with you and Kalle, as persons involved with
linux-wireless: is my understanding correct that submitting firmware
into linux-fimware repository is a prerequisite to accepting new
driver into linux-wireless?
In my
On 11/24/2016 02:59 PM, Kalle Valo wrote:
IgorMitsyanko writes:
On 11/23/2016 06:25 PM, Kalle Valo wrote:
IgorMitsyanko writes:
To clarify with you and Kalle, as persons involved with
linux-wireless: is my understanding correct that submitting firmware
into linux-fimware repository is a
On 11/28/2016 08:33 PM, Oleksij Rempel wrote:
Am 28.11.2016 um 18:10 schrieb Oleksij Rempel:
Am 28.11.2016 um 17:34 schrieb Kyle McMartin:
On Tue, Nov 22, 2016 at 9:44 AM, IgorMitsyanko
wrote:
Hi Ben, Kyle,
could you please share what is the position of linux-firmware regarding
firmware
On 11/28/2016 07:34 PM, Kyle McMartin wrote:
On Tue, Nov 22, 2016 at 9:44 AM, IgorMitsyanko
wrote:
Hi Ben, Kyle,
could you please share what is the position of linux-firmware regarding
firmware binaries that include GPL components? Does it require entire GPL
components codebase be present in
On 11/29/2016 06:49 AM, Oleksij Rempel wrote:
Am 28.11.2016 um 20:01 schrieb IgorMitsyanko:
On 11/28/2016 08:33 PM, Oleksij Rempel wrote:
Am 28.11.2016 um 18:10 schrieb Oleksij Rempel:
Am 28.11.2016 um 17:34 schrieb Kyle McMartin:
On Tue, Nov 22, 2016 at 9:44 AM, IgorMitsyanko
wrote:
Hi
On 11/29/2016 12:34 PM, Arend Van Spriel wrote:
On 29-11-2016 10:10, IgorMitsyanko wrote:
On 11/29/2016 06:49 AM, Oleksij Rempel wrote:
Am 28.11.2016 um 20:01 schrieb IgorMitsyanko:
On 11/28/2016 08:33 PM, Oleksij Rempel wrote:
Am 28.11.2016 um 18:10 schrieb Oleksij Rempel:
[...]
Oleksij
On 12/20/2016 11:39 PM, Jouni Malinen wrote:
From: vamsi krishna
Add support to use random local address (Address 2 = SA in transmit and
the same address in receive functionality) for Public Action frames in
order to improve privacy of WLAN clients. Applications fill the random
source address i
On 01/02/2017 02:28 PM, Johannes Berg wrote:
On Fri, 2016-12-30 at 22:55 +0300, IgorMitsyanko wrote:
The driver needs to configure receive behavior to accept frames to
the
specified random address during the time the frame exchange is
pending
and such frames need to be acknowledged similarly to
On 01/09/2017 03:39 PM, Johannes Berg wrote:
- msg = nlmsg_new(NLMSG_DEFAULT_SIZE, GFP_KERNEL);
+ msg = nlmsg_new(100 + ie_len, GFP_KERNEL);
Don't you want the '100' to be a define?
I didn't want to glorify it too much - some places may need more or
less over time. There's no sign
On 01/09/2017 05:28 PM, IgorMitsyanko wrote:
On 01/09/2017 03:39 PM, Johannes Berg wrote:
-msg = nlmsg_new(NLMSG_DEFAULT_SIZE, GFP_KERNEL);
+msg = nlmsg_new(100 + ie_len, GFP_KERNEL);
Don't you want the '100' to be a define?
I didn't want to glorify it too mu
On 01/11/2017 12:27 AM, Felix Fietkau wrote:
On 2017-01-10 11:56, Johannes Berg wrote:
On Tue, 2017-01-10 at 05:18 +0100, Linus Lüssing wrote:
On Mon, Jan 09, 2017 at 01:30:32PM -0800, Stephen Hemminger wrote:
I wonder if MAC80211 should be doing IGMP snooping and not bridge
in this environmen
On 01/11/2017 02:30 PM, Felix Fietkau wrote:
On 2017-01-11 12:26, IgorMitsyanko wrote:
On 01/11/2017 12:27 AM, Felix Fietkau wrote:
On 2017-01-10 11:56, Johannes Berg wrote:
On Tue, 2017-01-10 at 05:18 +0100, Linus Lüssing wrote:
On Mon, Jan 09, 2017 at 01:30:32PM -0800, Stephen Hemminger
21 matches
Mail list logo