Kalle Valo wrote:
> From: Marty Faltesek
>
> Commit 0b8e3c4ca29f ("ath10k: move cal data len to hw_params") broke
> retrieving
> the calibration data from cal_data debugfs file. The length of file was always
> zero. The reason is:
>
> static ssize_t ath10k_debug_cal_data_read(struct file *file,
> char __user *user_buf,
> size_t count, loff_t *ppos)
> {
> struct ath10k *ar = file->private_data;
> void *buf = file->private_data;
>
>
> This is obviously bogus, private_data cannot contain both struct ath10k and
> the
> buffer. Fix it by caching calibration data to ar->debug.cal_data. This also
> allows it to be accessed when the device is not active (interface is down).
>
> The cal_data buffer is fixed size because during the first firmware probe we
> don't yet know what will be the lenght of the calibration data. It was
> simplest
> just to use a fixed length. There's a WARN_ON() in
> ath10k_debug_cal_data_fetch() if the buffer is too small.
>
> Tested with qca988x and firmware 10.2.4.70.56.
>
> Reported-by: Nikolay Martynov
> Fixes: 0b8e3c4ca29f ("ath10k: move cal data len to hw_params")
> Cc: sta...@vger.kernel.org # 4.7+
> Signed-off-by: Marty Faltesek
> [kv...@qca.qualcomm.com: improve commit log and minor other changes]
> Signed-off-by: Kalle Valo
There were few checkpatch warnings, I fixed those in the pending branch.
drivers/net/wireless/ath/ath10k/debug.c:1472: code indent should use tabs where
possible
drivers/net/wireless/ath/ath10k/debug.c:1504: code indent should use tabs where
possible
drivers/net/wireless/ath/ath10k/debug.c:1504: please, no spaces at the start of
a line
drivers/net/wireless/ath/ath10k/debug.c:1505: code indent should use tabs where
possible
drivers/net/wireless/ath/ath10k/debug.c:1505: please, no spaces at the start of
a line
--
https://patchwork.kernel.org/patch/9369685/
Documentation about submitting wireless patches and checking status
from patchwork:
https://wireless.wiki.kernel.org/en/developers/documentation/submittingpatches