Re: ath10k inoperatable after suspend

[Michal Kazior]

On 19 September 2016 at 00:52, Steffen Arntz  wrote:
> Hi at all,
>
> I have an QCA988X based card in my laptop and have some "issues" with
> it, that I was not experiencing with my previous ath9k based card.
>
> The main issue is, that after suspend to RAM the card seems to be
> "hung up" and only reloading ath10k_core and ath10k_pci helps to fix
> the problem.

Hmm.. just a guess - maybe PCI config space isn't well preserved over
suspend and reloading modules prompts the PCI subsys to reset it.


Michal

ath10k inoperatable after suspend

[Steffen Arntz]

Hi at all,

I have an QCA988X based card in my laptop and have some "issues" with
it, that I was not experiencing with my previous ath9k based card.

The main issue is, that after suspend to RAM the card seems to be
"hung up" and only reloading ath10k_core and ath10k_pci helps to fix
the problem.

dmesg shows the following info after resuming:
>
> ACPI: Low-level resume complete
> ACPI : EC: EC started
> PM: Restoring platform NVS memory
> Enabling non-boot CPUs ...
> x86: Booting SMP configuration:
> smpboot: Booting Node 0 Processor 1 APIC 0x1
> numa_add_cpu cpu 1 node 0: mask now 0-1
>  cache: parent cpu1 should not be sleeping
> CPU1 is up
> smpboot: Booting Node 0 Processor 2 APIC 0x4
> numa_add_cpu cpu 2 node 0: mask now 0-2
>  cache: parent cpu2 should not be sleeping
> CPU2 is up
> smpboot: Booting Node 0 Processor 3 APIC 0x5
> numa_add_cpu cpu 3 node 0: mask now 0-3
>  cache: parent cpu3 should not be sleeping
> CPU3 is up
> ACPI: Waking up from system sleep state S3
> ehci-pci :00:1d.0: System wakeup disabled by ACPI
> PM: noirq resume of devices complete after 22.000 msecs
> PM: early resume of devices complete after 2.082 msecs
> tg3 :03:00.0: System wakeup disabled by ACPI
> sd 0:0:0:0: [sda] Starting disk
> rtc_cmos 00:01: System wakeup disabled by ACPI
> usb 2-1.6: reset high-speed USB device number 4 using ehci-pci
> ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
> ata1.00: supports DRM functions and may not be fully accessible
> ata1.00: disabling queued TRIM support
> ata1.00: supports DRM functions and may not be fully accessible
> ata1.00: disabling queued TRIM support
> ata1.00: configured for UDMA/133
> psmouse serio4: synaptics: queried max coordinates: x [..5714], y [..5172]
> usb 1-1.5: reset full-speed USB device number 10 using ehci-pci
> usb 1-1.5: device firmware changed
> usb 1-1.4: reset full-speed USB device number 4 using ehci-pci
> usb 1-1.2: reset high-speed USB device number 3 using ehci-pci
> PM: resume of devices complete after 4693.622 msecs
> PM: Finishing wakeup.
> Restarting tasks ... done.
> video LNXVIDEO:00: Restoring backlight state
> usb 1-1.5: USB disconnect, device number 10
> usb 1-1.5: new full-speed USB device number 11 using ehci-pci
> usb 1-1.5: New USB device found, idVendor=0cf3, idProduct=3004
> usb 1-1.5: New USB device strings: Mfr=0, Product=0, SerialNumber=0
> IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
> IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
> IPv6: ADDRCONF(NETDEV_UP): wlp1s0: link is not ready
> IPv6: ADDRCONF(NETDEV_UP): wlp1s0: link is not ready
> IPv6: ADDRCONF(NETDEV_UP): wlp1s0: link is not ready
> usb 1-1.5: USB disconnect, device number 11
> usb 1-1.5: new full-speed USB device number 12 using ehci-pci
> usb 1-1.5: New USB device found, idVendor=0cf3, idProduct=3004
> usb 1-1.5: New USB device strings: Mfr=0, Product=0, SerialNumber=0
> wlp1s0: authenticate with 14:cc:20:ec:xx:xx
> ath10k_pci :01:00.0: failed to synchronize setup for vdev 0 restart 0: 
> -110
> ath10k_pci :01:00.0: failed to start vdev 0 addr 1c:3e:84:d3:xx:xx on 
> freq 5180: -110
> ath10k_pci :01:00.0: failed to synchronize setup for vdev 0 restart 0: 
> -110
> ath10k_pci :01:00.0: failed to start vdev 0 addr 1c:3e:84:d3:xx:xx on 
> freq 5180: -110
> ath10k_pci :01:00.0: failed to start WMI vdev 0: -11
> ath10k_pci :01:00.0: failed to start vdev 0 addr 1c:3e:84:d3:xx:xx on 
> freq 5180: -11
> ath10k_pci :01:00.0: failed to start WMI vdev 0: -11
> ath10k_pci :01:00.0: failed to start vdev 0 addr 1c:3e:84:d3:xx:xx on 
> freq 5180: -11
> ath10k_pci :01:00.0: failed to delete WMI vdev 0: -11
> ath10k_pci :01:00.0: could not suspend target (-11)
> ath10k_pci :01:00.0: device has crashed during init
> ath10k_pci :01:00.0: device has crashed during init
> ath10k_pci :01:00.0: failed to wait for target init: -70
> [drm:ironlake_irq_handler [i915]] *ERROR* CPU pipe A FIFO underrun
> [drm:ironlake_irq_handler [i915]] *ERROR* PCH transcoder A FIFO underrun

at this point I reload the kernel modules
>
> ath10k_pci :01:00.0: pci irq msi oper_irq_mode 2 irq_mode 0 reset_mode 0
> ath10k_pci :01:00.0: Direct firmware load for 
> ath10k/pre-cal-pci-:01:00.0.bin failed with error -2
> ath10k_pci :01:00.0: Direct firmware load for 
> ath10k/cal-pci-:01:00.0.bin failed with error -2
> ath10k_pci :01:00.0: qca988x hw2.0 target 0x4100016c chip_id 0x043022ff 
> sub 1a56:1420
> ath10k_pci :01:00.0: kconfig debug 0 debugfs 0 tracing 0 dfs 0 testmode 0
> ath10k_pci :01:00.0: firmware ver 10.2.4.70.54 api 5 features 
> no-p2p,raw-mode,mfp crc32 9d340dd9
> ath10k_pci :01:00.0: Direct firmware load for 
> ath10k/QCA988X/hw2.0/board-2.bin failed with error -2
> ath10k_pci :01:00.0: board_file api 1 bmi_id N/A crc32 bebc7c08
> ath10k_pci :01:00.0: htt-ver 2.1 wmi-op 5 htt-op 2 cal otp max-sta 128 
> raw 0 hwcrypto 1


this happens on Linux hostnamehere