Andersan,
I still have nohz=off in my kernel command line, but I'll leave it to
Alan to elaborate on the issue, its effects and if it has been resolved.
All he said was "You'll also want to add nohz=off to your kernel command
line, as there seems to be something not right in the interrupt
co
Craig,
After deleting both files the cape-bone-mrf24j40-00A0.dtbo still loaded .
Then I realized I have done a stupid mistake. The kernel that actually was
running it was the factory version (3.8) from the eMMC and not 3.11 from
the sd-card. I fixed to boot from the sd-card and now it is working f
Andersan,
It sounds like your device tree overlay source file is fine. If I were
to have a stab in the dark, I would say you have an old compiled overlay
kicking around that is being loaded instead or your new modified
version. There appears to be two files doing the rounds -
BB-BONE-MRF24J4
Hi Craig,
Thanks for the prompt reply.
I have already fixed the file as described and reloaded
the cape-bone-mrf24j40-00A0.dtbo, but I still get the problem.
Am i missing something?
Best regards,
Andersan
2013/12/25 Craig Peacock
>
> Andersan,
>
> There was an eariler typo in the .dts file. C
Andersan,
There was an eariler typo in the .dts file. Change
compatible = "ti,beaglebone", "ti-beaglebone-black";
to
compatible = "ti,beaglebone", "ti,beaglebone-black";
Regards,
Craig
On 25/12/2013 2:05 PM, Andersan Xiley wrote:
Hello Guys,
I fixed the cape-bone-mrf24j40-00A0.dts and r
Hello Guys,
I fixed the cape-bone-mrf24j40-00A0.dts and reloaded as described, but I
still get the error:
# echo BB-BONE-MRF24J40 > /sys/devices/bone_capemgr.8/slots
[ 592.444140] bone-capemgr bone_capemgr.8: slot #8: Incompatible with
baseboard for 'BB-BONE-MRF24J40'
[ 592.453778] bone-capem
On 11/08/2013 01:05 PM, Andersan Xiley wrote:
>
> I'm in doubt about buying the BeagleBone Black version.
>
> The project on the link below is suppose to work on the BeagleBone Black?
>
> https://github.com/beagleboard/kernel/tree/3.8
>
Yes. Use the 3.11 branch. Use Craig Peacock's tutorial posted
Hello,
I'm in doubt about buying the BeagleBone Black version.
The project on the link below is suppose to work on the BeagleBone Black?
https://github.com/beagleboard/kernel/tree/3.8
Best regards,
--
November Webinars
